Asus prime z490m plus инструкция

1. Manuals
2. Brands
3. Asus Manuals
4. Motherboard
5. PRIME Z490M-PLUS
6. Manual

Quick Links

• Page 1
  PRIME Z490M-PLUS…
• Page 2
  Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

• Page 3: Table Of Contents

  Contents Safety information …………………. iv About this guide ………………….v PRIME Z490M-PLUS specifications summary …………vi Connectors with shared bandwidth …………….. ix Package contents ………………….x Installation tools and components …………….xi Chapter 1: Product Introduction Before you proceed ………………. 1-1 Motherboard layout ………………

• Page 4: Safety Information

  Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.

• Page 5: About This Guide

  Refer to the following sources for additional information and for product and software updates. ASUS website The ASUS website (www.asus.com) provides updated information on ASUS hardware and software products. Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer.

• Page 6: Prime Z490M-Plus Specifications Summary

  ® OptiMem * 10 Gen Intel Core™ i9/i7 CPUs support 2933/2800/2666/2400/2133 natively. ® Refer to www.asus.com for the Memory QVL (Qualified Vendors Lists). 1 x DisplayPort 1.4** 1 x HDMI 1.4b 1 x DVI-D Graphics * Graphics specifications may vary between CPU types.

• Page 7
  PRIME Z490M-PLUS specifications summary Rear USB (Total 6 ports) 2 x USB 3.2 Gen 2 ports (1 x Type-A + 1 x USB Type-C ® 2 x USB 3.2 Gen 1 ports (2 x Type-A) 2 x USB 2.0 ports (2 x Type-A) Front USB (Total 8 ports) 2 x USB 3.2 Gen 1 headers support additional 4 USB 3.2 Gen 1 ports…
• Page 8
  10 — 64 bit Operating System ® mATX Form Factor Form Factor 9.6 inch x 9.6 inch (24.4 cm x 24.4 cm) Specifications are subject to change without notice. Please refer to the ASUS website for the latest specifications. viii…

• Page 9: Connectors With Shared Bandwidth

  Connectors with shared bandwidth 24.4cm(9.6in) KBMS_USB910 EATX12V_1 CPU_FAN EATX12V_2 CHA_FAN2 DIGI+ 1442K AIO_PUMP HDMI_DP LGA1200 U32G2_C2 U32G2_1 LAN_U32G1_34 Intel ® I219V AUDIO M.2_1(SOCKET3) 22110 2280 2260 2242 PCIE SATA IRST PCIEX16_1 BATTERY PCIEX1_1 PCIE SATA IRST Super M.2_2(SOCKET3) Intel ® PCIEX1_2 Z490 2280…

• Page 10: Package Contents

  Package contents Check your motherboard package for the following items. Motherboard 1 x PRIME Z490M-PLUS motherboard Cables 2 x SATA 6Gb/s cables 1 x I/O Shield Miscellaneous 1 x M.2 SSD screw package Installation Media 1 x Support DVD Documentation 1 x User manual If any of the above items is damaged or missing, contact your retailer.

• Page 11: Installation Tools And Components

  Installation tools and components Phillips (cross) screwdriver PC chassis Power supply unit Intel LGA 1200 CPU Intel LGA 1200 compatible CPU Fan ® ® DDR4 DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card (optional) M.2 SSD module (optional) 1 Bag of screws The tools and components in the table above are not included in the motherboard package.

• Page 13: Chapter 1: Product Introduction

  Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. PRIME Z490M-PLUS…

• Page 14: Motherboard Layout

  Motherboard layout 24.4cm(9.6in) KBMS_USB910 EATX12V_1 CPU_FAN EATX12V_2 CHA_FAN2 DIGI+ 1442K AIO_PUMP HDMI_DP LGA1200 U32G2_C2 U32G2_1 LAN_U32G1_34 Intel ® I219V AUDIO M.2_1(SOCKET3) 22110 2280 2260 2242 PCIE SATA IRST PCIEX16_1 BATTERY PCIEX1_1 PCIE SATA IRST Super M.2_2(SOCKET3) Intel ® PCIEX1_2 Z490 2280 2260 2242…

• Page 15
  9. USB 2.0 headers 1-14 10. RGB headers 1-15 11. Clear CMOS header 1-16 12. COM Port header 1-17 13. Front Panel Audio header 1-17 14. S/PDIF Out header 1-18 15. SPI TPM header (14-1pin) 1-18 16. System Panel header 1-19 PRIME Z490M-PLUS…
• Page 16
  Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/ transit-related.
• Page 17
  A DDR4 memory module is notched differently from a DDR, DDR2, or DDR3 module. DO NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot. Recommended memory configurations DIMM_B1 DIMM_B2* DIMM_B2* DIMM_A1 DIMM_A2* DIMM_A2* DIMM_A2* PRIME Z490M-PLUS…
• Page 18
  (D/C) from the same vendor. Check with the vendor to get the correct memory modules. • Visit the ASUS website for the latest QVL. Chapter 1: Product Introduction…
• Page 19
  We recommend that you provide sufficient power when running CrossFireX™ mode. • Ensure to connect the 8-pin and 4-pin power plugs when running CrossFireX™ mode. • Connect a chassis fan to the chassis fan connectors when using multiple graphics cards for better thermal environment. PRIME Z490M-PLUS…
• Page 20
  Hyper M.2 X16 series card configuration Slot Description up to 3 Intel SSD on CPU support ® PCIe 3.0 x16_1 x8+x4+x4 • Hyper M.2 X16 series card sold separately. • When using up to 3 intel SSD on CPU support. If you wish to connect a display, we ®…
• Page 21
  Do not place jumper caps on the fan headers! • Ensure the cable is fully inserted into the header. Header Max. Current Max. Power Default Speed Shared Control CPU_FAN Q-Fan Controlled CHA_FAN1 Q-Fan Controlled CHA_FAN2 Q-Fan Controlled CHA_FAN3 Q-Fan Controlled AIO_PUMP Full-Speed PRIME Z490M-PLUS…
• Page 22
  Power connectors These Power connectors allow you to connect your motherboard to a power supply. The power supply plugs are designed to fit in only one orientation. Find the proper orientation and push down firmly until the power supply plugs are fully inserted. EATX12V_2 EATX12V_1 PIN 1…
• Page 23
  M.2_2 slot (Key M), type 2242/2260/2280 (supports SATA & PCIe 3.0 x4 mode). • When a device in SATA mode is installed on the M.2_2 socket, SATA6G_1 port cannot be used. • M.2 slots support IRST (Intel Rapid Storage Technology). ® The M.2 SSD module is purchased separately. PRIME Z490M-PLUS 1-11…
• Page 24
  When a device in SATA mode is installed on the M.2_2 socket, SATA6G_1 port cannot be used. • Before creating a RAID set, refer to the RAID Configuration Guide. You can download the RAID Configuration Guide from the ASUS website. Chapter 1: Product Introduction 1-12…
• Page 25
  IntA_P1_SSTX- IntA_P2_SSTX- IntA_P1_SSTX+ IntA_P2_SSTX+ IntA_P1_D- IntA_P2_D- IntA_P1_D+ IntA_P2_D+ The USB 3.2 Gen 1 module is purchased separately. The plugged USB 3.2 Gen 1 device may run on xHCI or EHCI mode depending on the operating system’s setting. PRIME Z490M-PLUS 1-13…
• Page 26
  USB 2.0 header The USB 2.0 header allows you to connect a USB module for additional USB 2.0 ports. The USB 2.0 header provides data transfer speeds of up to 480 Mb/s connection speed. USB1112 USB1314 PIN 1 DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! The USB 2.0 module is purchased separately.
• Page 27
  RGB LED strip is connected in the correct orientation, and the 12V connector is aligned with the 12V header on the motherboard. • The LED strip will only light up when the system is powered on. • The LED strip is purchased separately. PRIME Z490M-PLUS 1-15…
• Page 28
  Clear CMOS header This header allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords.
• Page 29
  HD Audio. Connect one end of the front panel audio I/O module cable to this header. We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard’s high-definition audio capability. PRIME Z490M-PLUS 1-17…
• Page 30
  S/PDIF Out header This header is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect the S/PDIF Out module cable to this header, then install the module to a slot opening at the back of the system chassis. SPDIF_OUT We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard’s high-definition audio capability.
• Page 31
  The 2-pin connector allows you to connect the chassis-mounted intrusion detection sensor or switch. The chassis intrusion sensor or switch sends a high-level signal to the connector when a chassis component is removed or replaced, the signal is then generated as a chassis intrusion event. PRIME Z490M-PLUS 1-19…
• Page 32
  Chapter 1: Product Introduction 1-20…

• Page 33: Building Your Pc System

  NOT install a CPU designed for LGA1155, LGA1156, and LGA1151 sockets on the LGA1200 socket. • ASUS will not cover damages resulting from incorrect CPU installation/removal, incorrect CPU orientation/placement, or other damages resulting from negligence by the user. PRIME Z490M-PLUS…

• Page 34
  Chapter 2: Basic Installation…

• Page 35: Cooling System Installation

  2.1.2 Cooling system installation Apply Thermal Interface Material to the CPU cooling system and CPU before you install the cooling system, if necessary. To install a CPU heatsink and fan assembly PRIME Z490M-PLUS…

• Page 36
  To install an AIO cooler If you wish to install an AIO cooler, we recommend installing the AIO cooler after installing the motherboard into the chassis. AIO_PUMP CPU_FAN Chapter 2: Basic Installation…

• Page 37: Dimm Installation

  2.1.3 DIMM installation To remove a DIMM PRIME Z490M-PLUS…

• Page 38: Installation

  2.1.4 M.2 installation Supported M.2 type varies per motherboard. The M.2 is purchased separately. Chapter 2: Basic Installation…

• Page 39: Motherboard Installation

  2.1.5 Motherboard installation Install the ASUS I/O Shield to the chassis rear I/O panel. Some sharp edges and points might cause physical injury. We recommend you put on cut or puncture resistant gloves before motherboard and I/O shield installation. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis’…

• Page 40
  Place eight (8) screws into the holes indicated by circles to secure the motherboard to the chassis. DO NOT over tighten the screws! Doing so can damage the motherboard. Chapter 2: Basic Installation…

• Page 41: Atx Power Connection

  2.1.6 ATX power connection • DO NOT connect the 4-pin power plug only, the motherboard may overheat under heavy usage. • Ensure to connect the 8-pin power plug, or connect both the 8-pin and 4-pin power plugs. PRIME Z490M-PLUS…

• Page 42: Sata Device Connection

  2.1.7 SATA device connection Chapter 2: Basic Installation 2-10…

• Page 43: Front I/O Connector

  2.1.8 Front I/O connector To install the front panel connector To install USB 3.2 Gen 1 connector USB 3.2 Gen 1 To install front panel audio connector To install USB 2.0 connector AAFP USB 2.0 PRIME Z490M-PLUS 2-11…

• Page 44: Expansion Card Installation

  2.1.9 Expansion card installation To install PCIe x16 cards To install PCIe x1 cards Chapter 2: Basic Installation 2-12…

• Page 45: Motherboard Rear And Audio Connections

  • Due to the design of the Intel chipset, all USB devices connected to the USB 3.2 Gen 1 ports are controlled by the xHCI controller. Some legacy USB devices must update their firmware for better compatibility. PRIME Z490M-PLUS 2-13…

• Page 46: Audio I/O Connections

  * Ethernet port LED indications Activity Link LED Speed LED ACT/LINK SPEED Status Description Status Description No link 10 Mbps connection Orange Linked Orange 100 Mbps connection Orange (Blinking) Data activity LAN port Green 1 Gbps connection Orange (Blinking Ready to wake up then steady) from S5 mode ** Audio 2, 4, 5.1, or 7.1-channel configuration…

• Page 47
  Connect to Stereo Speakers Connect to 2-channel Speakers Connect to 4-channel Speakers PRIME Z490M-PLUS 2-15…
• Page 48
  Connect to 5.1-channel Speakers Connect to 7.1-channel Speakers Chapter 2: Basic Installation 2-16…

• Page 49: Starting Up For The First Time

  While the system is ON, press the power button for less than four seconds to put the system on sleep mode or soft-off mode, depending on the BIOS setting. Press the power button for more than four seconds to let the system enter the soft-off mode regardless of the BIOS setting. PRIME Z490M-PLUS 2-17…

• Page 50
  Chapter 2: Basic Installation 2-18…

• Page 51: Chapter 3: Bios And Raid Support

  BIOS and RAID Support Knowing BIOS The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboard- only BIOS controls to enable a more flexible and convenient mouse input. You can easily navigate the new UEFI BIOS with the same smoothness as your operating system.

• Page 52: Bios Setup Program

  BIOS setup program Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screen include navigation keys and brief onscreen help to guide you in using the BIOS Setup program. Entering BIOS at startup To enter BIOS Setup at startup, press <Delete> or <F2> during the Power-On Self Test (POST).

• Page 53: Asus Ez Flash 3

  ASUS EZ Flash 3 The ASUS EZ Flash 3 feature allows you to update the BIOS without using an OS-based utility. Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu or press hotkey <F5>.

• Page 54: Asus Crashfree Bios 3

  The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. If you want to use the newer BIOS file, download the file at https://www.asus.com/support/ and save it to a USB flash drive.

• Page 55: Raid Configurations

  For more information on configuring your RAID sets, please refer to the RAID Configuration Guide which you can find at https://www.asus.com/support, or by scanning the QR code. RAID definitions RAID 0 (Data striping) optimizes two identical hard disk drives to read and write data in parallel, interleaved stacks.

• Page 56
  Chapter 3: BIOS Setup…

• Page 57: Appendix

  Appendix Notices FCC Compliance Information Responsible Party: Asus Computer International Address: 48720 Kato Rd., Fremont, CA 94538, USA Phone / Fax No: (510)739-3777 / (510)608-4555 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

• Page 58
  Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
• Page 59
  ASUS products sold in Vietnam, on or after September 23, 2011,meet the requirements of the Vietnam Circular 30/2011/TT-BCT. Các sản phẩm ASUS bán tại Việt Nam, vào ngày 23 tháng 9 năm2011 trở về sau, đều phải đáp ứng các yêu cầu của Thông tư 30/2011/TT-BCT của Việt Nam.
• Page 60
  ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials.
• Page 61
  доступний на: www.asus.com/support Cijeli tekst EU izjave o sukladnosti dostupan je na: www.asus.com/support Türkçe AsusTek Computer Inc., bu aygıtın temel gereksinimlerle ve ilişkili Čeština Společnost ASUSTeK Computer Inc. tímto prohlašuje, že Yönergelerin diğer ilgili koşullarıyla uyumlu olduğunu beyan eder.

• Page 62: Asus Contact Information

  +1-510-739-3777 +1-510-608-4555 Web site http://www.asus.com/us/ Technical Support Support fax +1-812-284-0883 Telephone +1-812-282-2787 Online support http://qr.asus.com/techserv ASUS COMPUTER GmbH (Germany and Austria) Address Harkort Str. 21-23, 40880 Ratingen, Germany +49-2102-959931 Web site http://www.asus.com/de Online contact http://eu-rma.asus.com/sales Technical Support Telephone +49-2102-5789555 Support Fax…