-
Contents
-
Table of Contents
-
Troubleshooting
-
Bookmarks
Quick Links
Owner’s Manual
AC
DC
AC & BATTERY
POWERED
FET
Related Manuals for Boss RC-2
Summary of Contents for Boss RC-2
-
Page 1
Owner’s Manual AC & BATTERY POWERED… -
Page 2
Thank you, and congratulations on your choice of the BOSS RC-2 Loop Station. Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (supplied on a separate sheet). These sections provide important in- formation concerning the proper operation of the unit. -
Page 3: Table Of Contents
Using the RC-2 for Practicing—Phrase Trainer … 26 Playing a Phrase Only Once (One-Shot Playback) … 27 Operating the RC-2 with an External Footswitch … 28 Saving and Deleting Phrases … 31 About the Tempo and Time Signature… 34 Changing the Battery … 38 Troubleshooting …
-
Page 4: Main Features
Main Features ● The RC-2 is a compact performance tool that enables anyone to create loop phrases of exact lengths—simply and easily. ● Up to 11 different loop phrases can be saved, with a maximum total length of 16 minutes.
-
Page 5: Panel Descriptions
* The input to AUX IN is muted whenever a cable is connected to the INPUT jack. * With the factory settings, the RC-2 applies compensation to the AUX IN signal so that it sounds appropriate when played through a typical guitar amplifier. If you’re using the RC-2 with a full-range speaker system, you can defeat this compensation if desired (“Defeating AUX IN Compen-…
-
Page 6
Using a special Roland PCS-31 connection cable (optional), you can connect two FS-5Us or an FS-6. 7. Pedal Switch • Pressing the pedal twice in quick succession stops the RC-2 dur- ing any of its operations (recording, playback, or overdubbing). Recording → Playback → Overdubbing Tempo Input →… -
Page 7
* A flashing light indicates that there is insufficient memory for recording or overdubbing (Temporary Memory; p. 31). * When the RC-2 lacks the memory required to save a phrase, the indicator flashes rapidly. * The indicator flashes rapidly while phrases are read from memory. -
Page 8
Panel Descriptions 13 . TAP TEMPO/SELECT/ENTER Button Use this when setting tempos, changing parameter values, and deleting and writing data. The function changes according to the position of the MODE knob. MODE Knob Position Description Set the tempo by repeatedly pressing the button at the desired speed (“Setting the tempo”; p. 35). , AUTO The indicator flashes at the same rate as the tempo. -
Page 9
The pedal switch is used to control recording, playback, and overdubbing (p. 13). (This is the RC-2’s normal operating mode.) After the pedal switch is used to put the RC-2 in recording standby, recording begins automat- AUTO ically when audio is received at the INPUT or AUX IN jack (p. 16). -
Page 10: Connections
Connections AC adaptor (sold separately) Guitar amp Jack type AUX IN jack: Stereo miniature phone STOP/TEMPO jack: Stereo 1/4-inch phone INPUT jack, OUTPUT jack: 1/4-inch phone CD/digital audio player Headphones Jack Electric guitar/bass PCS-31 Footswitches (sold separately) Stereo 1/4” phone plugs at both ends…
-
Page 11
* Inserting a connecting plug into the OUTPUT jack turns on the power to the unit. * Raise the amp volume only after turning on the power to all connected devices. * The use of an AC adaptor is recommended as the unit’s power consumption is relatively high. Should you prefer to use batteries, please use the alkaline type. -
Page 12: Turning The Power On/Off
Turning the Power On/Off Turning On the Power Insert the plug of the connection cable into the OUTPUT jack. * This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.
-
Page 13: Creating Loop Phrases By Recording Guitar Or Bass Performances
* For instructions on how to stop playback or overdubbing, refer to “Technique for Stopping Operation” (p. 6). On the RC-2, the process of recording an additional performance while a recorded performance plays back is called overdubbing. 3. Press the pedal to start recording.
-
Page 14
* For detailed information about setting the tempo, refer to “Setting the Tempo” (p. 35). * You can also set the tempo using the STOP/TEMPO jack. Refer to “Operating the RC-2 with an External Footswitch” (p. 28). * If you are recording a phrase with a time signature other than 4/4, set the time signature now (p. -
Page 15
(p. 31). * You cannot use undo if the RC-2 has only a small amount of memory left. (In this instance, the REC/PLAY/DUB indicator won’t flash rapidly when the pedal is held down for two seconds or more, and the undo operation won’t be… -
Page 16: Using Auto Mode To Automatically Start Phrase Recording With Audio Input
Light goes Lights in green 4. Play 5. Press the pedal to stop recording (recording begins (the phrase plays when the RC-2 receives audio input). back after you stop). Lights in Play. 6. Press the pedal to start overdubbing. Lights in…
-
Page 17
Pressing the pedal once while the unit is in recording standby cancels recording. 4. Begin your performance. The RC-2 starts recording as soon as it receives audio input. 5. Press the pedal to stop recording. Playback of the recorded phrase begins simultaneously. -
Page 18: Recording After Setting The Tempo With The Pedal
Recording After Setting the Tempo with the Pedal 1. Select an 2. Turn the MODE empty knob to phrase track. 8. Press the pedal twice Press the pedal to stop to stop playback. overdubbing (the phrase plays back after you stop). Light goes Press twice * For instructions on how to stop playback or overdubbing, refer to “Technique for Stopping Operation”…
-
Page 19
1. Turn the PHRASE SELECT knob to select an empty phrase track (1-11). 2. Set the MODE knob to You are now ready to set the tempo with the pedal. 3. Press the pedal several times in time with the tempo. Loop Quantize (p. -
Page 20: Creating Loop Phrases By Recording Phrases From A Cd/Digital Audio Player
Creating Loop Phrases by Recording Audio from a CD/Digital Audio Player 1. Select an 2. Turn the MODE empty knob to AUTO. phrase track. * For instructions on how to stop playback, refer to “Technique for Stopping Operation” (p. 6). 5.
-
Page 21
6. Start playback of the CD/digital audio player. The RC-2 starts recording as soon as it receives audio input. * Recording may stop before you are finished if the RC-2’s memory runs out. If this occurs, delete any unnecessary phrases (p. -
Page 22
AUX IN jack. If anything is connected to the INPUT jack, no signals from AUX IN will be recorded. With the factory settings, the RC-2 applies compensa- tion to the AUX IN signal so that it sounds appropriate when played through a typical guitar amp. -
Page 23: Playing/Overdubbing Along With A Saved Phrase
Playing/Overdubbing Along with a Saved Phrase 1. Select the phrase track 2. Turn the MODE containing the saved knob to phrase you want to play along with. * For instructions on how to stop playback or overdubbing, refer to “Technique for Stopping Operation” (p. 6). 3.
-
Page 24
Phrase Shift does not switch to an empty phrasetrack, but instead the phrase being played back continues toplay back. If you stop with the RC-2 in this state, the PHRASESELECT knob number and phrase track containing thephrase you were playing back will be different,… -
Page 25: Recording And Performing Along With The Guide
Recording and Performing Along with the Guide The RC-2 has a built-in guide that can be used as a rhythmic accompaniment during recording, playback, and overdubbing. A variety of guide patterns are pro- vided, covering many different musical styles. * The guide does not play during phrase recording if the tempo is not set ahead of time.
-
Page 26: Using The Rc-2 For Practicing-Phrase Trainer
Using the RC-2 for Practicing—Phrase Trainer While a saved phrase is playing back, its tempo can be adjusted without changing its pitch. This func- tionality is great for slowing down musical phras- es—such as fast guitar solos recorded from a CD/ digital audio player—making them easier to learn…
-
Page 27: Playing A Phrase Only Once (One-Shot Playback)
Playing a Phrase Only Once (One-Shot Playback) When a phrase is saved to a phrase track (1-11), it’s initially set to loop playback. After is has been saved, turning the MODE knob to allows you to use the TAP TEM- PO/SELECT/ENTER button to toggle between loop play- back (LOOP/ONE SHOT indicator: green) and One-Shot playback (LOOP/ONE SHOT indicator: red).
-
Page 28: Operating The Rc-2 With An External Footswitch
* The FS-5L cannot be used. • Press the footswitch during recording, playback, or overdubbing to stop the RC-2. • While the RC-2 is stopped, you can set the tempo by repeatedly pressing the footswitch at the desired speed. • You can clear the temporary memory by holding down the pedal for at least two seconds.
-
Page 29
B pedal is pressed • Pressing the footswitch during recording, playback, or overdubbing stops the RC-2. • While the RC-2 is stopped, you can set the tempo by repeatedly pressing the footswitch at the desired speed. • You can clear the temporary memory by holding down the pedal for at least two seconds. -
Page 30
* Empty phrase tracks are disregarded. For example, when you press the pedal switch one time while Phrase Track 1 is playing, if Phrase Track 2 is empty, the RC-2 will switch to Phrase Track 3. • When you switch to a phrase set to One-Shot Playback, the phrase is played to the end, and then playback stops. -
Page 31: Memory
(p. 32) before performing either of the above operations. What is a phrase track? A phrase track is an area of the RC-2’s internal memory in which phrases are stored. Phrases that are saved here are not deleted when the power is turned off.
-
Page 32: Save Phrases (Write)
* If you turn the MODE knob to a position other than WRITE while a different phrase track is selected as a save destination (see Step 3), the RC-2 switches phrase tracks and the recorded phrase is lost. <CAUTION> • Never turn off the RC-2’s power while the SELECT/ ENTER indicator is lit.
-
Page 33: Erasing A Saved Phrase
This condition is called “Write Protect mode.” You can select Write Protect mode with the following proce- dure. 1. If the RC-2 is turned on, switch the power off. * A phrase that has not been saved will be lost when you turn off the power.
-
Page 34: About The Tempo And Time Signature
About the Tempo and Time Signature The RC-2 allows you to set the tempo and time signature sepa- rately for each phrase track. These settings also determine how the guide tone will play, and how loop quantization will occur. This means that setting the tempo and time signature before re- cording makes it easy to create a correct, accurate loop phrase.
-
Page 35: Setting The Tempo
Setting the Tempo When you wish to record to an empty phrase track, you can set the tempo before recording. You can also change the playback tempo when playing back saved phrase tracks. * If you save a phrase after changing the playback tempo, the phrase is then saved with the modified tempo.
-
Page 36
Setting the Time Signature (4/4) for the Guide In addition to 4/4, the RC-2 allows you to set a 3/4 time signature. If you want to record a phrase with a time signature of 3/4, set this time signature before you start recording. -
Page 37: Guide Pattern List
Guide Pattern List BEAT PATTERN Beat1 Beat2 About the Tempo and Time Signature BEAT PATTERN 8Beat1 8Beat2 8Beat3 16Beat Triple Shuffle1 Shuffle2 Rock1 Rock2 Rock3 Rock4 Metal1 Metal2 Blues1 Blues2 Blues3 BEAT PATTERN Surf Beat Down Beat Funk1 Funk2 Groove R&B Bossa Nova Samba…
-
Page 38: Changing The Battery
Changing the Battery When the indicator goes dim or no longer lights, it means that the battery is nearly dead and must be replaced. Replace the battery following the steps below. * The use of an AC adaptor is recommended as the unit’s power consumption is relatively high.
-
Page 39: Troubleshooting
• Has the battery run down? Replace with a new battery (p. 38). * The battery included with the RC-2 is intended only for confirming that the unit is functional. * This unit consumes a large amount of current, so the use of an AC adaptor is recommended.
-
Page 40
Troubleshooting The LOOP/ONE SHOT indicator flashes even though there should be time remaining for recording • In the situations listed below, temporary memory for overdubbing (p. 31) is allocated separately from the phrase. As the maximum available recording time also includes time used in temporary memory, the LOOP/ONE SHOT indicator may flash in the following situations: •… -
Page 41: Specifications
Specifications RC-2: Loop Station Nominal Input Level… INPUT: -20 dBu Input Impedance… INPUT: 1 MΩ Nominal Output Level… -20 dBu Output Impedance … 1 kΩ Recommended Load Impedance … 10 kΩ or greater Internal Memory… Maximum recording time: 16 minutes Controls…
-
Page 42
Specifications Power Supply… DC 9 V: Dry battery/9 V type (6F22 (carbon), 6LR61 (alkaline)) , Current Draw … 50 mA (DC 9 V) Dimensions … 73 (W) x 129 (D) x 59 (H) mm Weight … 420 g /15 oz (including battery) Accessories… -
Page 43
This product complies with the requirements of European Directive 89/336/EEC. FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. -
Page 44
G6027115R1…
249 ₽
Инструкция (руководство пользователя) на Станция создания сэмплов BOSS RC-2
Артикул: boss-rc-2
Категория: BOSS
-
Описание
-
Детали
Описание
Инструкцию по эксплуатации BOSS RC-2 на русском языке можно будет скачать в личном кабинете после оформления и оплаты заказа.
Детали
| Формат файла |
|
|---|---|
| Размер инструкции в кб |
2176 |
8
Îïèñàíèå ïàíåëè
13. Êíîïêà TAP TEMPO/SELECT/ENTER
Èñïîëüçóåòñÿ äëÿ îïðåäåëåíèÿ òåìïà, ðåäàêòèðîâàíèÿ çíà÷åíèé ïàðàìåòðîâ, ñòèðàíèÿ èëè çàïèñè äàííûõ.
Ôóíêöèîíàëüíîå íàçíà÷åíèå îïðåäåëÿåòñÿ ðåãóëÿòîðîì MODE.
14. Èíäèêàòîð REC/PLAY/DUB
Ãîðèò èëè ìèãàåò âî âðåìÿ çàïèñè (îáû÷íîé èëè ñ íàëîæåíèåì) è âîñïðîèçâåäåíèÿ.
Ðåãóëÿòîð MODE
Îïèñàíèå
,
, AUTO
Äëÿ îïðåäåëåíèÿ òåìïà íàæèìàéòå ñ ñîîòâåòñòâóþùåé ñêîðîñòüþ íà ýòó êíîïêó (ñòð. 35).
Èíäèêàòîð ìèãàåò â ñîîòâåòñòâèè ñ òåêóùèì òåìïîì.
4/4
Îïðåäåëÿåò ìåòð òàêòà (ñòð. 36).
Ìåòð òàêòà äîëæåí áûòü îïðåäåëåí äî íà÷àëà çàïèñè.
Èñïîëüçóåòñÿ äëÿ âûáîðà ïàòòåðíîâ (ñòð. 36).
Ðåæèì âîñïðîèçâåäåíèÿ òðåêà – îáû÷íûé èëè çàöèêëåííûé (ñòð. 27).
Ôóíêöèÿ äîñòóïíà òîëüêî äëÿ òðåêîâ, ñîäåðæàùèõ äàííûå.
DELETE
Ñòèðàíèå âûáðàííîãî òðåêà (ñòð. 33).
Åñëè ðåãóëÿòîð MODE óñòàíîâëåí íà DELETE, èíäèêàòîð êíîïêè ìèãàåò èëè ãîðèò æåëòûì öâåòîì.
WRITE
Ñîõðàíåíèå çàïèñàííîé ôðàçû íà âûáðàííûé òðåê (ñòð. 32).
Åñëè ðåãóëÿòîð MODE óñòàíîâëåí íà WRITE, èíäèêàòîð êíîïêè ìèãàåò èëè ãîðèò êðàñíûì öâåòîì.
Ãîðèò
Áûñòðî ìèãàåò
Êðàñíûé
Çàïèñü
Ñîñòîÿíèå ãîòîâíîñòè ê çàïèñè
Çåëåíûé
Âîñïðîèçâåäåíèå
Ïî
c
ëåäîâàòåëüíûé âûáîð ôðàç (ñòð. 29)
Æåëòûé
Çàïèñü ñ íàëîæåíèåì
Âûïîëíåíèå ôóíêöèé UNDO è REDO (ñòð. 15)
Краткое содержание страницы № 1
RC-2_e.book 1 ページ ２００６年１０月２７日 金曜日 午前１０時３１分
Owner’s Manual
AC DC
AC & BATTERY
POWERED
FET
Краткое содержание страницы № 2
RC-2_e.book 2 ページ ２００６年１０月２７日 金曜日 午前１０時３１分 Thank you, and congratulations on your choice of the BOSS RC-2 Loop Station. Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (supplied on a separate sheet). These sections provide important in- formation concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature pro- vided by your new unit, this manual should be
Краткое содержание страницы № 3
RC-2_e.book 3 ページ ２００６年１０月２７日 金曜日 午前１０時３１分 Main Features…………………………………………………………………………………………. 4 Panel Descriptions …………………………………………………………………………………. 5 Connections…………………………………………………………………………………………. 10 Turning the Power On/Off……………………………………………………………
Краткое содержание страницы № 4
RC-2_e.book 4 ページ ２００６年１０月２７日 金曜日 午前１０時３１分 Main Features ● The RC-2 is a compact performance tool that enables anyone to create loop phrases of exact lengths—simply and easily. ● Up to 11 different loop phrases can be saved, with a maximum total length of 16 minutes. ● Phrase playback tempo can be controlled in real time without changing the phrase’s pitch. ● Undo and Redo functions allow the last overdub to be cancelled or restored, great for fixing performance mistakes made
Краткое содержание страницы № 5
RC-2_e.book 5 ページ ２００６年１０月２７日 金曜日 午前１０時３１分 Panel Descriptions fig.01 1. AC Adaptor Jack Accepts connection of an AC Adaptor (optionally available BOSS 12 3 PSA-series). By using an AC Adaptor, you can play without be- ing concerned about how much battery power you have left. * Use only the specified AC adaptor (PSA-series). * If there is a battery in the unit while an AC adaptor is being used, the RC-2 will switch over to battery-powered operation should the line voltage be inter
Краткое содержание страницы № 6
RC-2_e.book 6 ページ ２００６年１０月２７日 金曜日 午前１０時３１分 Panel Descriptions 4. OUTPUT Jack Phrase tracks Connect a guitar amp or monitor speaker here. containing re- Playback → Overdubbing * The OUTPUT jack also doubles as a power switch. corded phrases Inserting a plug into the OUTPUT jack switches on the power; pull • Pressing the pedal twice in succession stops the record- out the plug to switch the power off. To avoid unnecessary depletion ing, playback, or overdubb
Краткое содержание страницы № 7
RC-2_e.book 7 ページ ２００６年１０月２７日 金曜日 午前１０時３１分 Panel Descriptions 8. Thumbscrew 10. GUIDE LEVEL Knob Loosen this thumbscrew to open the pedal and facilitate bat- This adjusts the volume level of the guide sound. tery replacement. 11. LOOP/ONE SHOT Indicator * For instructions on replacing the battery, refer to “Changing the Battery” ; p. 38. This lights up when a phrase is saved to the selected phrase track. fig.02 Green: loop phrase 9 10 11 12 13 14 15 Red: one-
Краткое содержание страницы № 8
RC-2_e.book 8 ページ ２００６年１０月２７日 金曜日 午前１０時３１分 Panel Descriptions 13. TAP TEMPO/SELECT/ENTER Button Use this when setting tempos, changing parameter values, and deleting and writing data. The function changes according to the position of the MODE knob. MODE Knob Position Description Set the tempo by repeatedly pressing the button at the desired speed (“Setting the tempo”; p. 35). , , AUTO The indicator flashes at the same rate as the tempo. 4/4 Switches the time signature each
Краткое содержание страницы № 9
RC-2_e.book 9 ページ ２００６年１０月２７日 金曜日 午前１０時３１分 Panel Descriptions 15. MODE Knob Use this knob to switch between the RC-2’s operating modes. MODE Knob Position Description The pedal switch can be used to set the tempo as well as control recording, playback, and overdubbing (p. 18). The pedal switch is used to control recording, playback, and overdubbing (p. 13). (This is the RC-2’s normal operating mode.) AUTO After the pedal switch is used to put the RC-2 in recording standby, reco
Краткое содержание страницы № 10
RC-2_e.book 10 ページ ２００６年１０月２７日 金曜日 午前１０時３１分 Connections CD/digital audio player AC adaptor (sold separately) Headphones Jack Guitar amp Electric guitar/bass or PCS-31 Stereo 1/4” phone plugs at both ends Jack type AUX IN jack: Stereo miniature phone STOP/TEMPO jack: Stereo 1/4-inch phone INPUT jack, OUTPUT jack: 1/4-inch phone Footswitches (sold separately) 10
Краткое содержание страницы № 11
RC-2_e.book 11 ページ ２００６年１０月２７日 金曜日 午前１０時３１分 Connections * Inserting a connecting plug into the OUTPUT jack turns on the power to the unit. * Raise the amp volume only after turning on the power to all connected devices. * The use of an AC adaptor is recommended as the unit’s power consumption is relatively high. Should you prefer to use batteries, please use the alkaline type. * To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn
Краткое содержание страницы № 12
RC-2_e.book 12 ページ ２００６年１０月２７日 金曜日 午前１０時３１分 Turning the Power On/Off Turning On the Power Turning Off the Power Insert the plug of the connection cable into the Remove the plug of the connection cable from OUTPUT jack. the OUTPUT jack. * This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally. Important When turning on the power while a recorded track is being selected (the LOOP/ONE SHOT i
Краткое содержание страницы № 13
RC-2_e.book 13 ページ ２００６年１０月２７日 金曜日 午前１０時３１分 Creating Loop Phrases by Recording Guitar or Bass Performances 1. Select an 2. Turn the MODE 3. Press the pedal to Play. 4. Press the pedal to empty knob to . start recording. stop recording phrase track. (the phrase plays Lights in back after you stop). red Lights in green INPUT 6. Press the pedal twice Press the pedal to stop Play. 5. Press the pedal to to stop playback. overdubbing start overdubbin
Краткое содержание страницы № 14
RC-2_e.book 14 ページ ２００６年１０月２７日 金曜日 午前１０時３１分 Creating Loop Phrases by Recording Guitar or Bass Performances 1. Turn the PHRASE SELECT knob to select an 3. Press the pedal to start recording. empty phrase track (1-11). If the tempo has not been set, recording begins simulta- neously with the press of the pedal. If the tempo has The LOOP/ONE SHOT indicator remains off when a been set, recording begins one measure after the pedal phrase track is empty. is pressed. If there
Краткое содержание страницы № 15
RC-2_e.book 15 ページ ２００６年１０月２７日 金曜日 午前１０時３１分 Creating Loop Phrases by Recording Guitar or Bass Performances * Recording or overdubbing may stop before you are finished if Undoing Overdubs (UNDO/REDO) the RC-2’s memory runs out. If this occurs, delete any unnecessary phrases (p. 33) and try the operation again. The RC-2’s Undo function allows you to cancel the most re- cent overdub operation. This is convenient if you make a 6. When you are finished with playback or mistake
Краткое содержание страницы № 16
RC-2_e.book 16 ページ ２００６年１０月２７日 金曜日 午前１０時３１分 Using AUTO Mode to Automatically Start Phrase Recording with Audio Input 5. Press the pedal to 1. Select an 2. Turn the MODE 3. Press the pedal to switch 4. Play empty knob to AUTO. to recording standby mode. (recording begins stop recording phrase track. when the RC-2 receives (the phrase plays Flashes rapidly back after you stop). audio input). in red Lights in Lights in red green INPUT 7. Press the pedal twice Pre
Краткое содержание страницы № 17
RC-2_e.book 17 ページ ２００６年１０月２７日 金曜日 午前１０時３１分 Using AUTO Mode to Automatically Start Phrase Recording with Audio Input 1. Turn the PHRASE SELECT knob to select an 7. When you are finished with playback or empty phrase track (1-11). overdubbing, press the pedal twice. * Be sure to press the pedal two times within an interval of one 2. Set the MODE knob to AUTO. second. If recording in time with the tempo, you can press the * For more details on saving, refer to “Saving P
Краткое содержание страницы № 18
RC-2_e.book 18 ページ ２００６年１０月２７日 金曜日 午前１０時３１分 Recording After Setting the Tempo with the Pedal 1. Select an 2. Turn the MODE 3. Press the pedal 4. Hold down the pedal 5. Press the pedal to Play. empty knob to . several times in for two seconds to set start recording. phrase track. time with the tempo. the tempo. Flashes rapidly Lights in in yellow red INPUT Press several times Hold down two seconds 8. Press the pedal twice Press the pedal to stop Play. 7. Press
Краткое содержание страницы № 19
RC-2_e.book 19 ページ ２００６年１０月２７日 金曜日 午前１０時３１分 Recording After Setting the Tempo with the Pedal 1. Turn the PHRASE SELECT knob to select an 7. If you want to overdub onto the phrase, empty phrase track (1-11). press the pedal. Pressing the pedal toggles you between playback and 2. Set the MODE knob to . overdubbing modes. You are now ready to set the tempo with the pedal. * You can undo and redo the overdubs (Undo/Redo; p. 15). 3. Press the pedal several times in time w
Краткое содержание страницы № 20
RC-2_e.book 20 ページ ２００６年１０月２７日 金曜日 午前１０時３１分 Creating Loop Phrases by Recording Audio from a CD/Digital Audio Player 5. Press the pedal to 1. Select an 2. Turn the MODE 3. Play back the CD or 6. Play back the CD or switch to recording empty knob to AUTO. digital audio player, Digital audio player standby mode. phrase track. and adjust the volume. (recording begins). AUX IN Flashes rapidly Lights in 4. Cue up the CD/digital in red red audio player to
Русский
- Bedienungsanleitung Boss RC-2
- Boss RC-2 User Manual
- Manual Usuario Boss RC-2
- Mode d’emploi Boss RC-2
- Istruzioni Boss RC-2
- инструкция Boss RC-2
- Boss RC-2の取扱説明書
- Handleiding Boss RC-2
- Manual de uso Boss RC-2
Вам нужна инструкция? Мы поможем Вам ее найти и сэкономить Ваше время.
- 44 stron
- 2.01 mb
Изделие Boss RC-2, а также другие, которыми Вы пользуетесь ежедневно, наверняка вы получили в комплекте с инструкцией обслуживания. Из опыта наших пользователей мы знаем, что большинство из Вас не уделили этому особого внимания. Большая часть инструкций, сразу же после покупки попадает в корзину для мусора вместе с коробкой — это ошибка. Ознакомьтесь с информацией, касающейся инструкции Boss RC-2, которая поможет Вам в будущем сэкономить нервы и избежать головной боли.
Важная подсказка — не забывайте хотя бы раз прочитать инструкцию Boss RC-2
Если вы не хотите каждый раз читать информационные брошюры, касающиеся, тех или Boss RC-2 иных изделий, достаточно, прочитать их раз — сразу же после покупки устройства. Вы получите основное знания, касающиеся поддержания изделия Boss RC-2 в хорошем эксплуатационном состоянии, так, чтобы без проблем достигнуть его планируемого цикла работы. Затем инструкцию можно отложить на полку и вернуться к ней только в случае, если вы не уверены, правильно ли проводится техобслуживание изделия. Правильный уход является необходимым элементом Вашего удовольствия Boss RC-2.
Раз в году пересмотрите шкафчик, в котором держите инструкции для всех устройств, — выбросите те, которыми вы уже не пользуетесься. Это поможет Вам сохранять порядок в своей домашней базе инструкций обслуживания.
Summary of Contents for Boss RC-2
Что находится в инструкции Boss RC-2? Почему стоит ее прочитать?
- Гарантия и подробности, касающиеся техобслуживания изделия
Хорошей идеей будет прикрепить чек к странице инструкции. Если что-то плохое случится во время использования Boss RC-2, у вас будет комплект документов, необходимый для гарантийного ремонта. В этой части инструкции вы найдете информацию об авторизованных сервисных центрахBoss RC-2 а также, как самостоятельно правильно ухаживать за оборудованием — так, чтобы не потерять гарантийных прав. - Указания по монтажу и Setup
Не терять нервов и времени на самостоятельную попытку установки и первого запуска изделия. Воспользуйтесь рекомендациями производителя Boss RC-2 чтобы правильно запустить изделие, без лишнего риска повреждения оборудования. - Информация, касающаяся дополнительных запчастей (входящих в комплект а также являющихся опцией)
Пересматривая эту часть документа вы сможете проверить, доставлен ли ваш Boss RC-2 с полним комплектом аксессуаров. Вы также сможете узнать, какие дополнительные запчасти или аксессуары для Boss RC-2 Вы сможете найти и докупить к своему устройству. - Troubleshooting
Самые частые проблемы, касающиеся Boss RC-2 и методы их решения. Это очень полезная часть руководства по обслуживанию — она позволит Вам сэкономить много времени на поиск решений. 90% проблем с Boss RC-2 повторяется у многих пользователей. - Требования, касающиеся питания и энергетический класс
Информация, касающаяся количества потребляемой энергии, а также рекомендации, касающиеся установки и питания Boss RC-2. Прочитайте, чтобы оптимально пользоваться Boss RC-2 и не использовать большего количества ресурсов, нежели это необходимо для правильной работы изделия. - Специальные функции Boss RC-2
Здесь вы можешь узнать, как персонализировать изделие Boss RC-2. Вы узнаете, какие дополнительные функции могут помочь Вам удобно использовать продукт Boss RC-2 а также, какие функции Вашего устройства оптимальны для выполнения конкретной деятельности.
Как видите в инструкции вы найдете информацию, которая реально поможет Вам в использовании Вашего изделия. Стоит с ней ознакомиться, чтобы избежать разочарований, возникающих из более короткого, нежели предусматривалось, периода исправности изделия Boss RC-2. Если все же вы не хотите копить инструкции в своем доме, наш сайт поможет Вам в этом — вы должны найти у нас руководство по обслуживанию большинства из своих устройств, а также Boss RC-2.