Canon eos 1300d инструкция на русском

Поддержка

Canon EOS 1300D

Загружайте ПО, встроенное ПО и руководства, а также получите доступ к материалам поддержки для вашего продукта серии EOS.

Руководства пользователя

Руководства для вашего устройства или программного обеспечения перечислены ниже.

Приложения и функции

На этой вкладке можно посмотреть доступные приложения и функции, совместимые с вашим устройством.

Встроенное ПО

Встроенное ПО — это постоянное программное обеспечение, установленное на устройстве и обеспечивающее его корректную работу. Canon может периодически выпускать обновления для этого встроенного ПО, и если обновление доступно, его можно загрузить ниже.

FAQs

На этой вкладке вы найдете ответы на часто задаваемые вопросы и другую полезную информацию, которая поможет вам в решении вопросов и проблем.

Важная информация

На этой вкладке вы найдете подборку часто задаваемых вопросов, которые, на наш взгляд, будут вам интересны.

Коды ошибок

Код ошибки или сообщение об ошибке может появиться на устройстве по различным причинам. С помощью поля поиска можно найти полезную информацию о конкретном коде ошибки, где будут указаны причина ошибки и необходимые действия по ее устранению.

Технические характеристики

Ниже приведены все технические характеристики данного продукта.

1. Manuals
2. Brands
3. Canon Manuals
4. Digital Camera
5. EOS 1300D
6. Instruction manual

• Page 1: Instruction Manual

  EOS 1300D (W) Wireless Function Instruction Manual ENGLISH INSTRUCTION MANUAL…

• Page 2: Introduction

  Connect Station* (3) Send images to a Web service * Use the latest firmware. CANON iMAGE GATEWAY web services are not supported in certain countries and areas. For information on supported countries and areas, refer to the Canon website (www.canon.com/cig).

• Page 3
  (3) m Send images to a Web service (p.61) Share images with family and friends or share images using a range of Web services via CANON iMAGE GATEWAY, an online photo  service for Canon users (free registration required). Easy Connection Using the NFC Function…

• Page 4: Structure Of This Manual

  Structure of This Manual This manual is structured so that you can read the required pages according to the device to be connected and connection method. After registering a nickname and learning the basic operations in Chapter 1, follow the diagram below and see the corresponding pages according to your needs.

• Page 5: Table Of Contents

  Chapters Introduction Preparation and Basic Operation Easy Connection to a Smartphone Easy Connection to Connect Station Wi-Fi Connection to a Smartphone Wi-Fi Connection to a Web Service Checking and Operating Connection Settings Troubleshooting Guide Reference…

• Page 6
  Contents Introduction What You Can Do Using the Wireless Functions ……2 Structure of This Manual …………..4 Chapters………………. 5 Conventions Used in this Manual…………. 8 Preparation and Basic Operation Registering a Nickname …………..10 Basic Operation and Settings…………13 NFC Function ……………..
• Page 7
  Contents Reconnecting ………………56 Specifying Viewable Images …………57 Registering Multiple Connection Settings ……..60 Wi-Fi Connection to a Web Service Preparation for Web Services …………62 Checking the Type of Access Point ……….64 Connecting via WPS (PBC Mode) ……….65 Connecting via WPS (PIN Mode)………… 68 Connecting to a Detected Network Manually……..

• Page 8: Conventions Used In This Manual

  (p.**) : Reference page numbers for more information. : Warnings to prevent potential problems during operation. : Supplemental information. Note that Canon cannot be held liable for any loss or damage from  erroneous wireless communication settings for using the camera. In addition, Canon cannot be held liable for any other loss or damage caused by use of the camera.

• Page 9: Preparation And Basic Operation

  Preparation and Basic Operation This chapter describes how to register a nickname (for identification) necessary for using the camera’s wireless functions and the basic operations.

• Page 10: Registering A Nickname

  Registering a Nickname First, set the camera’s nickname (for identification). When the camera is connected to another device wirelessly, the nickname will be displayed on the device. Be sure to set a nickname as otherwise you cannot set the wireless functions. Select [Wi-Fi/NFC].

• Page 11
  Registering a Nickname Enter a nickname. For instructions on entering  characters, see the next page. Enter any characters between 1 to 10  characters in length. Exit the setting. When you are finished, press the  <M> button. Select [OK] on the confirmation …
• Page 12
  Registering a Nickname Virtual Keyboard Operation Changing the entry area  Press the <Q> button to toggle between the top and bottom entry areas. Moving the cursor  Press the <Y> <Z> keys in the top area to move the cursor. Entering text …

• Page 13: Basic Operation And Settings

  Basic Operation and Settings The basic operation for using the camera’s wireless functions is explained here. Follow the procedures below. Select [Wi-Fi/NFC]. Under the [53] tab, select [Wi-Fi/  NFC], then press <0>. Select [Enable]. Press the <Z> key to select …

• Page 14
  Basic Operation and Settings Select the Wi-Fi function to connect to. Press the <Y> <Z> keys to select  an item.  When the connection settings are not registered, the setting screen is displayed.  When the connection settings are already registered, the reconnection screen is displayed.
• Page 15
  Basic Operation and Settings Wireless Connection Status Wireless connection status can be checked with the camera’s <k> lamp. Connection Status <k> lamp Connected Sending data Blinking rapidly Waiting for connection/ Blinking slowly Waiting for reconnection <k> lamp Blinking Connection error somewhat rapidly Cable Connection Cautions…

• Page 16: Nfc Function

  NFC Function Using an NFC-enabled smartphone or Connect Station enables you to do the following: Touch a smartphone to the camera to easily connect them wirelessly  (p.21). While playing back images on the camera, touch a smartphone to  the camera to send a captured image to the smartphone (p.32).

• Page 17
  NFC Function When establishing wireless communications using the NFC function, see the following pages. Connecting to a smartphone wirelessly: page 21* Sending images to a smartphone: page 32* Connecting to Connect Station: page 38 * When connecting to a smartphone, see pages 18 and 20 as well. NFC Function Cautions This camera cannot be connected to other NFC-enabled cameras or …

• Page 18: Preparation For Smartphones

  Preparation for Smartphones To use [q] (Connect to smartphone), a smartphone on which iOS or Android is installed is necessary. In addition, the dedicated application Camera Connect (free of charge) must be installed on the smartphone. Camera Connect can be downloaded from the App Store or Google …

• Page 19: Easy Connection To A Smartphone

  Easy Connection to a Smartphone Connecting the camera to a smartphone enables you to do the following: • View images stored in the camera on a smartphone or save viewed images to a smartphone. • Operate the camera to take a picture or change camera settings using a smartphone.

• Page 20: Connection Method

  Connection Method When the smartphone is NFC-enabled: See page 21.  You can easily set up a connection using the NFC function. When the smartphone is not NFC-enabled: See page 24.  Set up a connection by selecting [Easy connection]. Smartphones labeled with the p mark are NFC-enabled.

• Page 21: Connecting Automatically With The Nfc Function

  Connecting Automatically with the NFC Function Connect the camera and a smartphone using the NFC function. The operation flow for connecting via NFC is as follows. (1) Turn on the camera and smartphone. (2) Enable the NFC function on the camera and smartphone. (3) Touch the smartphone to the camera so that they come into contact with each other.

• Page 22
  Connecting Automatically with the NFC Function Connect to the camera. When a connection is established,  the screen on the left will appear on the camera’s LCD monitor. When connecting to the same smartphone, this screen will not appear again. To specify viewable images, press the …
• Page 23
  Connecting Automatically with the NFC Function If necessary, also read “NFC Function Cautions” (p.17).  When touching the smartphone to the camera, be careful not to drop the  camera or smartphone. Do not touch the smartphone to the camera with too much force. Doing …

• Page 24: Connecting With Easy Connection

  Connecting with Easy Connection The camera and a smartphone can be directly connected wirelessly. No access point is necessary, so you can establish a wireless connection easily. To establish connection, operations on the smartphone are required. For details, refer to the smartphone’s instruction manual. Operation on the Camera-1 Select [Wi-Fi function].

• Page 25
  Connecting with Easy Connection Operation on the Smartphone-1 Operate the smartphone and Smartphone’s screen (sample) connect it to the camera. Activate the smartphone’s Wi-Fi  function, then select the SSID (network name) displayed on the camera’s LCD monitor. For the password, enter the …
• Page 26
  Connecting with Easy Connection Select the camera to connect to on the smartphone. Select and touch the camera to  connect to from [Cameras] on Camera Connect. Operation on the Camera-2 Connect to the camera. When a connection is established, …
• Page 27
  Connecting with Easy Connection Operation on the Smartphone-2 Operate the camera using Camera Connect. Perform further operations using  Camera Connect. See page 28. The settings for connecting to a smartphone are now complete. To register multiple connection settings, see page 60. …

• Page 28: Operating The Camera Using A Smartphone

  Operating the Camera Using a Smartphone You can use a smartphone with Camera Connect installed to view images stored in the camera and shoot remotely. Camera Connect Main Window The main functions of Camera Connect are described below. Touch the screen to learn the operation procedures.

• Page 29
  Operating the Camera Using a Smartphone Terminating the Connection To terminate the connection, perform either of the following operations. On the smartphone’s Camera Connect screen, tap [t]. Set the camera’s power to <2>. While connected, a picture cannot be taken even if the camera’s shutter …

• Page 30: Reconnecting

  Reconnecting The camera can reconnect to a smartphone for which connection settings have been registered. Select [Wi-Fi function]. Under the [53] tab, set [Wi-Fi/NFC]  to [Enable], then select [Wi-Fi function]. Select [q]. Select [q] (Connect to smartphone)  and press <0>. Select [Connect].

• Page 31
  Reconnecting Activate the smartphone’s Wi-Fi function. If the connection destination has  been changed, restore the setting to connect to the camera. Start Camera Connect on the smartphone. A connection will be established.  If you do not know the SSID of the camera when reconnecting, select …

• Page 32: Easy Image Transfer Using The Nfc Function

  Easy Image Transfer Using the NFC Function While playing back images on the camera, touch an NFC-enabled smartphone to the camera to send a captured image to the smartphone. If a connection has already been established wirelessly, terminate  the connection and then play back an image on the camera. Set up the camera to allow use of its NFC function in advance …

• Page 33
  Easy Image Transfer Using the NFC Function Select the images to send. Select and send image(s).  When the index display is selected in  step 2, the multiple image selection screen will appear. See step 3 on page 34. Sending Images Individually Select and send images individually.
• Page 34
  Easy Image Transfer Using the NFC Function Sending Multiple Images Select multiple images and send them at once. If the multiple image selection screen is displayed, perform from step 3. Press <0>. Select [Send selected]. To select a size at which to send the …
• Page 35
  Easy Image Transfer Using the NFC Function Select [Resize image]. Set it if necessary.  On the displayed screen, select an  image size, then press <0>. Select [Send]. The selected images will be sent.  When the transfer is complete, the screen for step 1 will reappear.
• Page 36
  Easy Image Transfer Using the NFC Function Terminating the Connection To end the image transfer, press the  <M> button on the image transfer screen. Select [OK] on the confirmation  dialog to terminate the connection. If necessary, also read “NFC Function Cautions” (p.17). …

• Page 37: Easy Connection To Connect Station

  Easy Connection to Connect Station Connect Station (sold separately) is a device that allows you to import captured still photos and movies for viewing on your TV set, smartphone, etc., or sharing them over a network. You can easily save still photos and movies to Connect Station by holding this camera close to Connect Station.

• Page 38: Saving Images

  Saving Images This section explains how to connect the camera and Connect Station (sold separately) wirelessly. To save images in other ways, refer to the Connect Station Instruction Manual. Set up the camera to allow use of its NFC function in advance …

• Page 39
  Saving Images If necessary, also read “NFC Function Cautions” (p.17).  While saving images, a picture cannot be taken even if the camera’s  shutter button is pressed. Do not drop the camera on Connect Station or touch the camera to it with …

• Page 41: Wi-Fi Connection To A Smartphone

  Wi-Fi Connection to a Smartphone This section mainly explains how to connect the camera to a smartphone via a Wi-Fi access point. Install Camera Connect on the smartphone before setting  up a connection (p.18). These instructions should be followed only after the …

• Page 42: Checking The Type Of Access Point

  Checking the Type of Access Point To start with, check if the access point supports WPS* that allows easy connection between Wi-Fi devices. If you do not know if the access point you use is WPS-compatible, refer to the access point instruction manual or other documentation. * Wi-Fi Protected Setup When WPS is supported …

• Page 43: Connecting Via Wps (Pbc Mode)

  Connecting via WPS (PBC Mode) This is a connection mode available when using an access point compatible with WPS. In pushbutton connection mode (PBC mode), the camera and the access point can be connected simply by pressing the WPS button on the access point. If multiple access points are active in the surrounding area, it may be …

• Page 44
  Connecting via WPS (PBC Mode) Select [Connect with WPS]. Select [Connect with WPS] and  press <0>. Select [WPS (PBC mode)]. Select [WPS (PBC mode)] and press  <0>. Select [OK] and press <0> to go to  the next screen. Connect to the access point.

• Page 45: Connecting Via Wps (Pin Mode)

  Connecting via WPS (PIN Mode) This is a connection mode available when using an access point compatible with WPS. In PIN code connection mode (PIN mode), an 8- digit identification number specified on the camera is set at the access point to establish a connection.

• Page 46
  Connecting via WPS (PIN Mode) Select [Connect with WPS]. Select [Connect with WPS] and  press <0>. Select [WPS (PIN mode)]. Select [WPS (PIN mode)] and press  <0>. Select [OK] and press <0> to go to  the next screen. Specify the PIN code at the access point.
• Page 47
  Connecting via WPS (PIN Mode) Connect to the access point. Select [OK] and press <0> to  establish a connection with the access point.  When a connection with the access point is established, the IP address setting screen is displayed. For subsequent operations, see page …

• Page 48: Connecting To A Detected Network Manually

  Connecting to a Detected Network Manually Establish a connection by selecting the SSID (or ESS-ID) of the access point to connect to from a list of active access points nearby. Selecting the Access Point Select [Wi-Fi function]. Under the [53] tab, set [Wi-Fi/NFC] …

• Page 49
  Connecting to a Detected Network Manually Select an access point. (2) (3) Press the <W> <X> keys to select  the access point to connect to from the list of access points, then press <0>. (1) SSID (2) An icon is displayed if the access point is encrypted (3) Channel used [Refresh] and [Manual setting] Scroll down the screen in step 4 to display [Refresh] and [Manual…
• Page 50
  Connecting to a Detected Network Manually Entering the Access Point Encryption Key Enter the encryption key (password) specified for the access point.  For details on the specified encryption key, refer to the access point’s instruction manual. The screens displayed in steps 5 to 7 below vary depending on the …

• Page 51: Connecting To A Smartphone

  Connecting to a Smartphone These instructions are continued from pages 43 — 50. To establish connection, operations on the smartphone are required.  For details, refer to the smartphone’s instruction manual. Operation on the Camera-1 Select [Auto setting]. Select [Auto setting] and press …

• Page 52
  Connecting to a Smartphone Select the camera to connect to on the smartphone. Select and touch the camera to  connect to from [Cameras] on Camera Connect. If multiple cameras are displayed,  identify the camera to connect to by its MAC address displayed on the camera’s LCD monitor.
• Page 53
  Connecting to a Smartphone Operation on the Smartphone-2 Operate the camera using Camera Connect. Perform further operations using  Camera Connect. See page 54. The settings for connecting to a smartphone are now complete. Camera Access Point Mode Camera access point mode is a connection mode for connecting the camera directly to each device.

• Page 54: Operating The Camera Using A Smartphone

  Operating the Camera Using a Smartphone You can use a smartphone with Camera Connect installed to view images stored in the camera and shoot remotely. Camera Connect Main Window The main functions of Camera Connect are described below. Touch the screen to learn the operation procedures.

• Page 55
  Operating the Camera Using a Smartphone Terminating the Connection To terminate the connection, perform either of the following operations. On the smartphone’s Camera Connect screen, tap [t]. Set the camera’s power to <2>. While connected, a picture cannot be taken even if the camera’s shutter …

• Page 56: Reconnecting

  Reconnecting The camera can reconnect to a smartphone for which connection settings have been registered. Select [Wi-Fi function]. Under the [53] tab, set [Wi-Fi/NFC]  to [Enable], then select [Wi-Fi function]. Select [q]. Select [q] (Connect to smartphone)  and press <0>. Select [Connect].

• Page 57: Specifying Viewable Images

  Specifying Viewable Images You can specify images viewable from a smartphone by operating the camera. Images can be specified during connection setup or after the connection is terminated. Select [Wi-Fi function]. Under the [53] tab, set [Wi-Fi/NFC]  to [Enable], then select [Wi-Fi function].

• Page 58: All Images

  Specifying Viewable Images Select [Viewable imgs]. Select [Viewable imgs] and press  <0>. Select an item. Select an item, then press <0>.  Select [OK] and press <0> to  display the setting screen. [All images] All images stored on the card become viewable. [Images from past days] Specify viewable images on the shooting-date basis.

• Page 59
  Specifying Viewable Images [Select by rating] Specify viewable images depending on whether a rating has been added (or not added) or by the type of rating. Select a rating, then press <0> to  specify the viewable images. [File number range] (Select range) Select the first and last images from images arranged by the file number to…

• Page 60: Registering Multiple Connection Settings

  Registering Multiple Connection Settings You can register up to three smartphone connection settings. Select [Wi-Fi function]. Under the [53] tab, set [Wi-Fi/NFC]  to [Enable], then select [Wi-Fi function]. Select [q]. Select [q] (Connect to smartphone)  and press <0>. Select [Choose set.].

• Page 61: Wi-Fi Connection To A Web Service

  Wi-Fi Connection to a Web Service You can register various Web services on the camera and send images stored in the camera to them.

• Page 62: Preparation For Web Services

  Preparation for Web Services Signing Up as a CANON iMAGE GATEWAY Member To send images to Web services, you need to sign up as a CANON iMAGE GATEWAY member (free of charge). Once you are a CANON iMAGE GATEWAY member, you can publish photos you took in online albums and use a range of services.

• Page 63
  Preparation for Web Services Configuring Settings to Use Web Services Start EOS Utility on the computer, log in to CANON iMAGE GATEWAY, then configure the camera’s settings to enable access to Web services.  For details, refer to the EOS Utility Instruction Manual. For how to obtain EOS Utility and the EOS Utility Instruction Manual, refer to the Camera Instruction Manual.

• Page 64: Checking The Type Of Access Point

  Checking the Type of Access Point To start with, check if the access point supports WPS* that allows easy connection between Wi-Fi devices. If you do not know if the access point you use is WPS-compatible, refer to the access point instruction manual or other documentation. * Wi-Fi Protected Setup When WPS is supported …

• Page 65: Connecting Via Wps (Pbc Mode)

  Connecting via WPS (PBC Mode) This is a connection mode available when using an access point compatible with WPS. In pushbutton connection mode (PBC mode), the camera and the access point can be connected simply by pressing the WPS button on the access point. If multiple access points are active in the surrounding area, it may be …

• Page 66
  Connecting via WPS (PBC Mode) Select a Web service. Select a Web service to connect to,  then press <0>. The contents and ordering of the list  of items displayed will vary depending on settings. The Web service to connect to can be …
• Page 67
  Connecting via WPS (PBC Mode) Connect to the access point. Press the access point’s WPS button.  For details about where the button is located and how long to press it, refer to the access point’s instruction manual. Select [OK] and press <0> to …

• Page 68: Connecting Via Wps (Pin Mode)

  Connecting via WPS (PIN Mode) This is a connection mode available when using an access point compatible with WPS. In PIN code connection mode (PIN mode), an 8- digit identification number specified on the camera is set at the access point to establish a connection.

• Page 69
  Connecting via WPS (PIN Mode) Select [Connect with WPS]. Select [Connect with WPS] and  press <0>. Select [WPS (PIN mode)]. Select [WPS (PIN mode)] and press  <0>. Select [OK] and press <0> to go to  the next screen. Specify the PIN code at the access point.
• Page 70
  Connecting via WPS (PIN Mode) Select [Auto setting]. Select [Auto setting] and press  <0>. Select [OK] and press <0> to  display an image on the card.  The camera’s <k> lamp will light up in green. If [Auto setting] results in an error or …

• Page 71: Connecting To A Detected Network Manually

  Connecting to a Detected Network Manually Establish a connection by selecting the SSID (or ESS-ID) of the access point to connect to from a list of active access points nearby. Selecting the Access Point Select [Wi-Fi function]. Under the [53] tab, set [Wi-Fi/NFC] …

• Page 72
  Connecting to a Detected Network Manually Select an access point. (2) (3) Press the <W> <X> keys to select  the access point to connect to from the list of access points, then press <0>. (1) SSID (2) An icon is displayed if the access point is encrypted (3) Channel used [Refresh] and [Manual setting] Scroll down the screen in step 4 to display [Refresh] and [Manual…
• Page 73
  Connecting to a Detected Network Manually Entering the Access Point Encryption Key Enter the encryption key (password) specified for the access point.  For details on the specified encryption key, refer to the access point’s instruction manual. The screens displayed in steps 5 to 7 below vary depending on the …

• Page 74: Setting The Ip Address

  Connecting to a Detected Network Manually Setting the IP Address Select [Auto setting]. Select [Auto setting] and press  <0>. Select [OK] and press <0> to  display an image on the card.  The camera’s <k> lamp will light up in green.

• Page 75
  Connecting to a Detected Network Manually Send To A screen to select a destination may be displayed depending on the type or settings of the Web service you select. To register destinations or to specify the settings, you must use a computer.

• Page 76: Sending Images To A Web Service

  Sending Images to a Web Service You can share images with your family and friends by sending images from the camera to a Web service registered on the camera or by sending links to the online albums. Sending Images Individually Select and send images individually.

• Page 77
  Sending Images to a Web Service When the [Terms of use] screen is  displayed, thoroughly read the message, then select [I Agree]. The screen can be scrolled up and  down by pressing the <W> <X> keys. Sending Multiple Images Select multiple images and send them at once.
• Page 78
  Sending Images to a Web Service Select [Resize image]. Set it if necessary.  When YouTube is selected as the  destination, [Resize image] is not displayed. On the displayed screen, select an  image size, then press <0>. Select [Send]. Select [Send] and press <0>.
• Page 79
  RAW images cannot be sent.  When sending an image to a Web service other than CANON iMAGE  GATEWAY, a send error message may not be displayed even if the image was not sent to the Web service successfully. Such errors can be checked on the CANON iMAGE GATEWAY site;…

• Page 80: Reconnecting

  Reconnecting The camera can reconnect to a Web service for which connection settings have been registered. The connection to the access point only has to be established once. You do not need to establish a new connection for each Web service. Select [Wi-Fi function].

• Page 81: Registering Multiple Connection Settings

  Registering Multiple Connection Settings You can register up to three Web service connection settings. Select [Wi-Fi function]. Under the [53] tab, set [Wi-Fi/NFC]  to [Enable], then select [Wi-Fi function]. Select [m]. Select [m] (Upload to Web service)  and press <0>. Select a Web service.

• Page 83: Checking And Operating Connection Settings

  Checking and Operating Connection Settings This section explains how to check or change the connection settings, delete the settings, clear the wireless function settings, etc.

• Page 84: Checking, Changing, Or Deleting Connection Settings

  Checking, Changing, or Deleting Connection Settings Check, change, or delete connection settings saved on the camera. Terminate the connection, then perform the operation. Select [Wi-Fi function]. Under the [53] tab, set [Wi-Fi/NFC]  to [Enable], then select [Wi-Fi function]. Select the item to check settings for.

• Page 85
  Checking, Changing, or Deleting Connection Settings Check or change the settings. Select an item and press <0>, then  check or change the settings on the displayed screen. [Change set.] Change the settings. When [Change set.] is selected, a screen for connection settings configuration appears.

• Page 86: Deleting Settings

  Checking, Changing, or Deleting Connection Settings Deleting Settings Select [Delete settings] in step 3 on page 84 to delete connection settings saved on the camera. Select [Delete settings]. Select [Delete settings] and press  <0>. Select the setting to delete. Select the setting to delete, then …

• Page 87: Clearing Wi-Fi Function Settings

  Clearing Wi-Fi Function Settings Delete all settings for [Wi-Fi function]. You can prevent the information set with [Wi-Fi function] from being exposed when you lend or give your camera to other people. Select [Wi-Fi function]. Under the [53] tab, set [Wi-Fi/NFC] …

• Page 88
  Clearing Wi-Fi Function Settings General Settings Screen On the [General sett.] screen displayed in step 3 on the preceding page, you can change or check the wireless settings. [Edit nickname] Change the nickname. Select [Edit nickname], then enter the nickname using the virtual keyboard (p.12). [Error details] Selectable when a connection error has occurred.

• Page 89: Troubleshooting Guide

  Troubleshooting Guide…

• Page 90: Responding To Error Messages

  Responding to Error Messages When a connection error occurs, display the details of the error by following the procedures below. Then, eliminate the cause of the error referring to the examples shown in this chapter. Select [53: Wi-Fi function] 9 [General sett.] 9 [Error details], …

• Page 91
  Responding to Error Messages 11: Connection target not found In the case of [q], is Camera Connect running?  Establish a connection using Camera Connect (p.25, 51).  Are the camera and the access point set to use the same …
• Page 92
  Responding to Error Messages 21: No address assigned by DHCP server What to check on the camera On the camera, IP address is set to [Auto setting]. Is this the  correct setting?  If no DHCP server is used, configure settings after setting the IP address to [Manual setting] on the camera (p.108).
• Page 93
  Responding to Error Messages 22: No response from DNS server What to check on the camera On the camera, does the DNS server’s IP address setting  match the server’s actual address? Set the IP address to [Manual setting]. Then, on the camera, set …
• Page 94
  Responding to Error Messages 23: Device with same IP address exists on selected network What to check on the camera Is another device on the camera network using the same IP  address as the camera? Change the camera’s IP address to avoid using the same address …
• Page 95
  Responding to Error Messages 61: Selected SSID wireless LAN network not found Are any obstacles blocking the line of sight between the  camera and the antenna of the access point? Move the antenna of the access point to a position clearly visible …
• Page 96
  Responding to Error Messages 63: Wireless LAN authentication failed Are the camera and the access point set to use the same  authentication method? The camera supports the following authentication methods: [Open  system], [Shared key], and [WPA/WPA2-PSK] (p.42, 64). Are the camera and the access point set to use the same …
• Page 97
  Responding to Error Messages 65: Wireless LAN connection lost Are any obstacles blocking the line of sight between the  camera and the antenna of the access point? Move the antenna of the access point to a position clearly visible …
• Page 98
  Responding to Error Messages 68: Cannot connect to wireless LAN terminal. Retry from the beginning. Did you hold down the access point’s WPS (Wi-Fi Protected  Setup) button for the specified period of time? Hold down the WPS button for the period of time instructed by the …
• Page 99
  Is the network connected?  Check the connection status of the network.  126: Could not connect to server CANON iMAGE GATEWAY is under maintenance or load is  concentrated temporarily. Try connecting to the Web service again later. …

• Page 100: Troubleshooting Guide

  If a problem occurs with the camera, first consult this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center. A device connected with a cable cannot be used. When [53: Wi-Fi/NFC] is set to [Enable], connection via interface …

• Page 101: Wireless Function Notes

  Wireless Function Notes If the transmission rate drops, the connection is lost, or other problems occur when using the wireless functions, try the following corrective actions. Access Point and Antenna Installation Location When using indoors, install the device in the room where you are …

• Page 102
  Wireless Function Notes Security If security settings have not been properly set, the following problems may occur. Transmission monitoring  Third parties with malicious intent may monitor the wireless LAN transmissions and attempt to acquire the data you are sending. Unauthorized network access …

• Page 103: Checking Network Settings

  Checking Network Settings Windows  Open the Windows [Command Prompt], then type ipconfig/all and press the <Enter> key. The IP address assigned to the computer is displayed, as well as the subnet mask, gateway, and DNS server information. Mac OS …

• Page 105: Reference

  Reference…

• Page 106: Setting Network Manually

  Setting Network Manually Set the network settings for the camera access point mode manually. Set [SSID], [Channel setting], and [Encryption settings] on each screen displayed. Select [Manual connection]. Select [Manual connection] and  press <0>. Select [OK] and press <0> to go to …

• Page 107
  Setting Network Manually Select the desired encryption setting. Select an item, then press <0>. For  encryption, select [AES]. Select [OK] and press <0>.  When [AES] is selected, the virtual  keyboard (p.12) is displayed. Enter any encryption key of eight characters, then press the <M>…

• Page 108: Setting Ip Address Manually

  Setting IP Address Manually Set the IP address settings manually. The items displayed will differ depending on the Wi-Fi function. Select [Manual setting]. Select [Manual setting], then press  <0>. Select [OK] and press <0> to go to  the next screen. Select the item to be set.

• Page 109
  Setting IP Address Manually Select [OK]. When you have completed setting the  necessary items, select [OK] and press <0>.  The setting screen for the Wi-Fi function will appear. If you are not sure what to enter, see  “Checking Network Settings”…

• Page 110: Specifications

  Images can be sent and saved to Connect Station. Connect Station: Send images to a Images in the camera or links to images can be sent to Web service: registered Web services. All the data above is based on Canon’s testing standards. …

• Page 111: Wi-Fi (Wireless Lan) Precautions

  To avoid violating wireless LAN regulations, visit the Canon website to check where use is allowed. Note that Canon cannot be held liable for any problems arising from wireless LAN use in other countries and regions.

• Page 112
  Hereby, Canon Inc., declares that this DS126621 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Please contact the following address for the original Declaration of Conformity: CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands CANON INC.

• Page 113: Index

  Reconnecting ….. 30, 56, 80 Cable……….15 Reducing the image size ..35, 78 Camera access point mode ….53 Remote shooting …… 28, 54 Camera Connect….18, 28, 54 CANON iMAGE GATEWAY ….62 Sending images……32, 76 Clearing wireless communication Settings ………. 84 settings……….87 Changing……..85 Connect Station…….37…

• Page 114: Canon Inc

  CANON EUROPA N.V. PO Box 2262, 1180 EG Amstelveen, The Netherlands For your local Canon office, please refer to your warranty card or to www.canon-europe.com/Support The product and associated warranty are provided in European countries by Canon Europa N.V. CEL-SW5ZA210…