Casio db 36 1avef инструкция

Требуется руководство для вашей Casio Collection DB-36-1AVEF Наручные часы? Ниже вы можете просмотреть и загрузить бесплатно руководство в формате PDF. Кроме того, приведены часто задаваемые вопросы, рейтинг изделия и отзывы пользователей, что позволит оптимально использовать ваше изделие. Если это не то руководство, которое вы искали, – свяжитесь с нами.

Ваше устройство неисправно, и в руководстве отсутствует решение? Перейдите в Repair Café для получения бесплатных ремонтных услуг.

Перейти к контенту

MO0308-EA

About This Manual

(Light)

General Guide

• Press B to change from mode to mode.

• In any mode, press L to illuminate the display.

Timekeeping Mode

Timekeeping

Day of week Hour : Minutes

Seconds

Year Month–Day

PM indicator

Language indicator

Seconds

Minutes

• The currently selected language indicator flashes on the display while the

Language (setting) is selected in the above sequence.

3. When the setting you want to change is flashing, use E and D to change it as

described below.

To change this setting

Seconds

Year, Month, Day, Hour,

Minutes

Language

• While the language indicator is flashing on the display, use E and D to cycle

through the language indicators as shown below, until the one for the language

you want to select is displayed.

Press E.

Indicator Language

ENx

English

POR

Portuguese

ESP

Spanish

FRA

French

NED

Dutch

Press D.

4. Press A to exit the setting screen.

• The day of the week is automatically displayed in accordance with the date (year,

month, and day) settings.

• See the «Day of the Week List» for information on abbreviations used.

• In addition to the day of the week display, the language setting also affects the type

of characters you can input for the name in the Data Bank Mode.

• Holding down A in the Timekeeping Mode displays the indicator for the currently

selected language. Keeping A depressed for one or two seconds changes to the

Timekeeping Mode setting screen (indicated by the seconds flashing). If you

accidentally display the setting screen, press A again to exit.

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press C to toggle between 12-hour timekeeping (indicated

by A or P on the display), or 24-hour timekeeping.

• With the 12-hour format, the P (PM) indicator appears on the display for times in the

range of noon to 11:59 p.m. and the A (AM) indicator appears for times in the range

of midnight to 11:59 a.m.

• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all modes.

Operation Guide 2515

• Button operations are indicated using the letters shown

in the illustration.

• Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the «Reference» section.

Data Bank Mode

Press B.

Use the Timekeeping Mode to set the time and date. You

can also view the Dual Time Mode screen or Data Bank

Mode screen from the Timekeeping Mode.

Note

This watch is capable of displaying text for the day of the

week in any one of 13 different languages (English,

Portuguese, Spanish, French, Dutch, Danish, German,

Italian, Swedish, Polish, Romanian, Turkish, and Russian).

To set the time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Use C and B to move the flashing in the sequence

shown below to select other settings.

Press C.

Press B.

Year

Month

Day

Hour

Language

Perform this button operation

Press E to reset to 00.

Use E (+) and D (–) to change the setting.

Use E and D to change the language setting.

Indicator Language

Indicator Language

DAN

RO

Danish

DEU

T)R

German

ITA

PUC

Italian

SVE

Swedish

POL

Polish

Alarm Mode

Dual Time Mode

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To toggle the Timekeeping Mode time between DST and Standard Time

To display the Data Bank screen and Dual Time screen in the Timekeeping Mode

Holding down D in the Timekeeping Mode displays the Dual Time screen. Holding

down E displays the record you were viewing when you last used the Data Bank

Mode.

Dual Time Screen

Data Bank

Remaining

memory

Romanian

Turkish

Telephone number

Russian

To create a new Data Bank record

Name area

Number area

New Data Screen

Press E.

Press D.

• The above character sequence is for English input. See «Character List» for the

character sequences of other languages.

4. When the character you want is at the cursor position, press C to move the cursor

to the right.

5. Repeat steps 3 and 4 until the name is complete.

• You can input up to eight characters for the name.

Stopwatch Mode

Countdown Timer Mode

Holding down C for about two seconds in the

Timekeeping Mode toggles between Daylight Saving Time

(DST display) and Standard Time (DST not displayed).

• Note that pressing C in the Timekeeping Mode also

toggles between 12-hour timekeeping and 24-hour

timekeeping.

• The DST indicator appears on the display to indicate

that daylight saving time is turned on.

Hold down D.

Hold down E.

The Data Bank Mode lets you store up to 30 records,

each containing name and telephone number data.

Records are automatically sorted based on the characters

of the name. You can recall records by scrolling through

Name

them on the display.

• The characters you can input for the name depend on

the language you select in the Timekeeping Mode. See

«To set the time and date» for more information.

Changing the language setting does not affect names

that are already stored.

• See «Sort Table» for details on how the watch sorts

records.

• All of the operations in this section are performed in the

Data Bank Mode, which you enter by pressing B.

1. In the Data Bank Mode, press C to display the new

data screen.

• If the new data screen does not appear when you

press C, it means that memory is full. To store

another record, you will first have to delete some of

the records stored in memory.

2. Hold down A until the flashing cursor (_) appears in

the name area of the display.

3. In the name area, use E and D to cycle through

characters at the cursor position. The characters cycle

in the sequence shown below.

A

Z

@

—

to

to

(space)

(alphabet)

(symbol)

Data Bank Screen

0

9

to

(number)

1