Certina ds first lady moon phase инструкция

Требуется руководство для вашей Certina Urban C033.257.22.088.00 DS-8 Lady Moon Phase Наручные часы? Ниже вы можете просмотреть и загрузить бесплатно руководство в формате PDF. Кроме того, приведены часто задаваемые вопросы, рейтинг изделия и отзывы пользователей, что позволит оптимально использовать ваше изделие. Если это не то руководство, которое вы искали, – свяжитесь с нами.

Ваше устройство неисправно, и в руководстве отсутствует решение? Перейдите в Repair Café для получения бесплатных ремонтных услуг.

Для просмотра каталога моделей Certina (ассортимент, цены, скидки) перейдите по данной ссылке: купить часы Certina.

Инструкции для часов Certina имеют трехзначный порядковый номер. Этот номер не указывается на самих часах. Номер указывается только на бирке:

1. 321-RU
Аналоговые модели (Analog watches) — стандартная инструкция для простых часов (механические или кварцевые модели, 2 или 3 стрелки, без даты/с датой/с днем недели, без специальных функций). Подходит для большинства моделей часов марки Certina.

2. 322-RU
Автоматические хронографы (Automatic Chronographs) — инструкция для механических часов с автоподзаводом с функцией хронографа.

3. 323-RU
Многофункциональные часы (Multifunctional Watches) — инструкция для кварцевых мультифункциональных часов Certina с жидкокристаллическим дисплеем.

4. 324-RU
Хронографы с будильником (Chronographs with Alarm) — инструкция для часов Certina с функцией хронографа и функцией будильника.

5. 325-RU
Хронографы с функцией возврата (Fly-Back Chronographs) — инструкция для часов Certina с хронографом с функцией возврата.

6. 326-RU
Хронограф с автоматическим подзаводом + Фаза Луны (Automatic Moonphase Chronographs) — инструкция для механических часов Certina с автоподзаводом, хронографом и индикацией фазы Луны.

7. 327-RU
Кварцевые часы с хронографом (Quartz Chronographs) — инструкция для кварцевых часов Certina с функцией хронографа.

8. 328-RU
DS 8 Multifunction — инструкция для кварцевых многофункциональных часов Certina из коллекции DS Multi-8.

9. 331-RU
Часы с будильником (Analog Watches with Alarm) — инструкция для часов Certina с функцией будильника.

10. 334-RU
Кварцевые часы с хронографом G10 (Quartz Chronographs G10) — инструкция для больших кварцевых часов Certina с функцией хронографа.

11. 342-RU
Автоматический хронограф с корректором (Automatic Chronograph with Corrector) — инструкция для автоматических часов Certina с функцией хронографа с корректором.

12. 344-RU
Кварцевые часы с хронографом G15 (Quartz Chronographs G15) — инструкция для маленьких кварцевых часов Certina с функцией хронографа.

13. 349-RU
Кварцевые хронографы с функцией всемирного времени (Quartz Chronographs GMT) — инструкция для кварцевых часов Сertina с функцией хронографа и индикацией времени второго часового пояса (GMT).

14. 352-RU
Хронографы Quartz PRECIDRIVE 1/100 секунды — инструкция для кварцевых часов Сertina (механизм PRECIDRIVE) с функцией хронографа с точностью измерений до 1/100 секунды.

15. 353-RU
Хронографы Quartz PRECIDRIVE 1/10 секунды — инструкция для кварцевых часов Сertina (механизм PRECIDRIVE) с функцией хронографа с точностью измерений до 1/10 секунды.

16. 354-RU
Кварцевый хронограф PRECIDRIVE с указателем фазы Луны — инструкция для кварцевых часов Сertina (механизм PRECIDRIVE) с функцией хронографа и индикацией фазы Луны.

17. 355-RU
Кварцевый хронограф PRECIDRIVE — инструкция для кварцевых часов Сertina (механизм PRECIDRIVE) с функцией хронографа.

18. 356-RU
Кварцевые Часы с Аналоговыми Указателями — стандартная инструкция для простых кварцевых часов Certina, 2 или 3 стрелки, без даты/с датой/с днем недели, без специальных функций). Подходит для большинства кварцевых моделей часов марки Certina.

19. 357-RU
Механические Часы с Аналоговыми Указателями — стандартная инструкция для простых механических часов Certina, 2 или 3 стрелки, без даты/с датой/с днем недели, без специальных функций). Подходит для большинства механических моделей часов марки Certina.

20. 364-RU
Кварцевые часы PRECIDRIVE MOON PHASE — инструкция для кварцевых часов Сertina (механизм PRECIDRIVE F05.441) с индикацией фазы Луны.

PRECIDRIVE Moon Phase
Quartz Chronographs
User's Manual
10
5
60
65
A
0
40
70
9
7
TAC
HY
ME
TE
R
6
75
3 00
80
24 0
B
60
90
180
2 00
85
1
8
1
10
0
110
120
3
13 0
14 0
4
2
Displays and functions
Watch:
 Hour hand
 Minute hand
 Seconds hand
 Date indicator
Chronograph:
 Seconds hand (chronograph)
 60-minute counter (chronograph)
 12-hour counter (chronograph)
 Moon phase
 Tachymeter
A START/STOP pusher
B SPLIT/Reset pusher
 3-position crown:
I Rest position (screwed in*, not pulled out)
II Date setting position (unscrewed*, half pulled out)
III Time-setting position (unscrewed*, completely pulled out)
IA IB
WWW. C E R T IN A . C O M
* Models with screwed crown:
IA Initial position (screwed in, not pulled out)
IB Neutral position (unscrewed, not pulled out)
1/4
3 5 4 _EN / 09.15
PRECIDRIVE Moon Phase Quartz Chronographs
Congratulations
We congratulate you on choosing a CERTINA® chronograph. Meticulously designed, using only high-quality materials and components, your chronograph is
protected against shock loads, variations in temperature, water, dust and also benefits from the DS concept.
This manual applies to CERTINA® quartz chronographs equipped with the PRECIDRIVE movement G10.962 BH PRD. For the settings and operation of your
PRECIDRIVE chronograph, please refer to the instructions below.
Your PRECIDRIVE chronograph allows you to time events lasting up to 12 hours, and offers you the following functions:
– Standard chronograph START–STOP function
– ADD function (partial times)
– SPLIT function (intermediate times)
To ensure the operating precision of your chronograph for many years to come, we advise you to pay careful attention to the advice given in this manual.
The DS (Double Security) concept is characterised by:
– its scratch and impact resistance,
– its tough sapphire crystal,
– a gasket inside the crown and a gasket around the winding stem guaranteeing the water resistance of the watch even when the crown is pulled out,
– a reinforced case back.
Settings
Models with screw-down crown
To ensure even better water resistance, some models are fitted with a screw-down crown. Before setting the time or date, you must first unscrew the crown
to position IB, before pulling it out to position II or III.
Important: After each operation, you must always screw the crown back down to ensure that your watch remains water-resistant. You are
advised not to operate the crown (8) underwater.
Setting the time
Pull the crown out to position III; the seconds hand will stop and the chronograph seconds hand will complete a rotation of the dial (entering setting mode).
Turn the crown forwards or backwards to the desired time, and then push it back into the rest position I. When the hour hand passes the 12 o'clock position,
you can see whether it is indicating midnight (the date will change) or midday (the date will not change).
Advice for synchronising your watch
To synchronise the small seconds hand with an official time signal (radio/TV/Internet), pull the crown out to position III; the seconds hand will stop. At the
tone, push the crown back into the rest position I.
Rapid date correction
Pull the crown out to position II. The chronograph seconds hand will complete a rotation of the dial (entering setting mode). Turn the crown clockwise or
anticlockwise until the desired date is displayed.
Tachymeter (according to model)
The tachymeter allows you to measure the average speed of a moving object. Start timing by pressing pusher (A), and then stop by pressing pusher (B) once
a distance of 1 km has been reached. The chronograph seconds hand will be pointing to a number on the tachymeter scale, indicating the speed in km/h.
Resetting the chronograph counters
5
60
TAC
HY
ME
TE
R
A
0
40
70
65
75
3 00
6
80
24 0
8
85
60
90
180
2 00
If necessary, the chronograph counters must be reset before starting timing. Proceed as follows: pull
the crown out to position II; the chronograph seconds hand will complete a rotation of the dial (entering
setting mode). Every time pusher (A) is pressed, a different hand will be activated, and it can be returned
to its start point by repeatedly pressing pusher (B). When pusher (B) is held down, the hand rotation speed
will increase.
1
10
0
110
120
13 0
B
14 0
WWW. C E R T IN A . C O M
2/4
3 5 4 _EN / 09.15
PRECIDRIVE Moon Phase Quartz Chronographs
Simple timing
60
The "simple timing" function enables you to measure individual events.
TAC
HY
ME
TE
R
A
A START
B
A STOP
Time readout (Fig. 1)
- 3 hours
- 5 minutes
- 57 seconds
B Reset
0
40
70
65
75
3 00
80
24 0
8
60
90
180
2 00
85
1
10
0
110
120
13 0
14 0
NB: Before each timing operation, the chronograph hands must be at their start points. If necessary, refer to
the RESETTING THE CHRONOGRAPH COUNTERS paragraph.
Fig. 1
Note: All the timing functions are available with the crown pressed into the rest position I.
ADD function
60
The ADD function enables you to measure consecutive events without having to reset in between. Each time
is added to the previous total.
A
0
40
70
65
TAC
HY
ME
TE
R
75
3 00
A START
80
24 0
8
2 00
85
A RESTART
60
90
180
A STOP Readout
1
10
0
110
120
13 0
A STOP Readout
B
A RESTART
14 0
A STOP Readout
B Reset counters
Fig. 2
SPLIT-TIME function
60
The SPLIT-TIME function enables you to stop the hands to read an intermediate time without interrupting
the timing. When you restart, the chronograph hands "catch up" to the ongoing elapsed time.
A
0
40
70
65
TAC
HY
ME
TE
R
75
3 00
A START
80
24 0
8
60
90
180
2 00
85
Time 1 readout (as per Fig. 1)
- 3 hours
- 5 minutes
- 57 seconds
B
1
10
0
110
120
13 0
B SPLIT 1
14 0
B RESTART (catchup)
Fig. 3
B SPLIT 2
60
TAC
HY
ME
TE
R
A
0
40
70
65
Time 2 readout (as per Fig. 3)
- 4 hours
- 45 minutes
- 20 seconds
75
3 00
B RESTART (catchup)
80
24 0
8
60
90
180
2 00
85
1
10
0
110
120
13 0
B
14 0
A STOP
Final time readout (cumulative time) (as per Fig. 4)
- 7 hours
- 55 minutes
- 45 seconds
B Reset counters
Fig. 4
WWW. C E R T IN A . C O M
3/4
3 5 4 _EN / 09.15
PRECIDRIVE Moon Phase Quartz Chronographs
60
65
Resetting the moon phase
A
To synchronise the moon phase with an official lunar calendar (radio, TV, Internet).
0
40
70
9
TAC
HY
ME
TE
R
75
3 00
Pull the crown out to position III, and press pusher (A) to turn the moon phase clockwise, or press
pusher (B) to turn it anticlockwise. When one of the pushers is held down, the rotation speed will
increase (Fig. 5).
80
24 0
8
60
90
180
2 00
85
1
10
0
110
120
13 0
B
14 0
Fig. 5
Reading the moon phase
9
A
The moon phase is read as per the example in Fig. 6.
8
Days
On 25 February 2015, at 17:14, the moon is in its first quarter. This corresponds approximately to the
8th day of an average lunar cycle.
B
Quarters
Fig. 6
Technical information
Winding
Quartz watches do not need to be wound.
PRECIDRIVE
PRECIDRIVE quartz chronographs, from CERTINA®, can boast not only the precision of quartz, but also their temperature variation compensated
(thermocompensated) rate, making them insensitive to moisture. This enables them to achieve a precision of around +/- 10 seconds per year (under normal
conditions of use).
EOL (End of Life) function
When the seconds hand is jumping every 4 seconds, your chronograph is telling you that the battery has reached its end of life, and will soon need to be
replaced.
Care and maintenance
We would advise you to clean your chronograph regularly (except for the leather strap) using a soft cloth and lukewarm soapy water. After immersion in salt
water, rinse it in fresh water and leave it to dry completely.
Do not leave it anywhere subjected to high variations in temperature or humidity, direct sunlight or strong magnetic fields.
We would advise you to have your watch inspected every 3 to 4 years by an approved CERTINA® representative or retailer. To enjoy meticulous standards of
service and to ensure your guarantee remains in force, please always consult an approved CERTINA® representative or retailer.
If you plan not to wear your chronograph for several weeks or months, we would advise you to store it with the crown pulled out to position III. This cuts the
electrical power supply to the motor, thereby extending battery life considerably.
Replacing the battery
The autonomy of a PRECIDRIVE chronograph from CERTINA® is generally more than 2 years in continuous use. Once the battery has been drained, it must be
replaced without delay by an approved CERTINA® representative or retailer.
Battery type: silver oxide and zinc button cell, 1.55 V, No. 394, SR 936 SW.
Collection and treatment of end of life quartz watches*
This symbol indicates that this product should not be disposed of as household waste. It must be returned to an approved collection point. By following
this procedure you will contribute to safeguarding the environment and human health. Recycling the materials will help to conserve natural resources.
* valid in the EU member states and in any countries with corresponding legislation.
WWW. C E R T IN A . C O M
4/4
3 5 4 _EN / 09.15

Accompanying Data:

Certina PRECIDRIVE Moon Phase Watch PDF Operation & User’s Manual (Updated: Saturday 11th of March 2023 01:46:04 AM)

Rating: 4.3 (rated by 16 users)

Compatible devices: PRECIDRIVE, Precidrive DS-8, G15.261, PRECIDRIVE Flyback DS-2, G10, Multifunction Watches, Analog Watches, IA.

Recommended Documentation:

Text Version of Operation & User’s Manual

(Ocr-Read Summary of Contents of some pages of the Certina PRECIDRIVE Moon Phase Document (Main Content), UPD: 11 March 2023)

• Certina PRECIDRIVE Moon Phase User Manual

• Certina PRECIDRIVE Moon Phase User Guide

• Certina PRECIDRIVE Moon Phase PDF Manual

• Certina PRECIDRIVE Moon Phase Owner’s Manuals

Recommended: IFG 51 K.A BK S, KCG-1501G, GF14

Product Types by Certina:

• Watch

Popular Right Now:

Operating Impressions, Questions and Answers: