Datalogic bc2030 инструкция на русском

• Page 1
  QuickScan™ QBT2400 General Purpose Handheld Area Imager Bar Code Reader with Bluetooth® Wireless Technology Quick Reference Guide…
• Page 2
  Datalogic has taken reasonable measures to provide informa- tion in this manual that is complete and accurate, however, Datalogic reserves the right to change any specification at any time without prior notice. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A.
• Page 3
  Replacing the Battery Pack ……….11 Using the Quickscan™ QBT2400 ……….13 Linking the Reader …………..14 Link Datalogic RF Devices to Base……14 Linking to a Bluetooth Adapter in Serial Port Profile Mode…………….14 Linking to a Bluetooth Adapter in HID mode..15 Variable PIN Code …………
• Page 4
  FCC RF Radiation Exposure Statement….42 Canadian Notice …………..42 Power Supply …………..43 Imager Labeling …………..43 WEEE Statement …………… 45 Datalogic ADC Limited Factory Warranty ……. 46 Warranty Coverage ……….46 Warranty Claims Process……..46 Warranty Exclusions……….47 No Assignment …………48 Risk of Loss …………..
• Page 5
  2. Scope Of License Granted. 2.1 Datalogic grants to End User a non-exclusive, non-transferable, perpetual license to use the Software, solely on the Datalogic Product in which it is embedded («designated Datalogic Product»), in machine-readable form only, solely for End User’s internal business purposes. This Agreement does not convey ownership of the Software to End User.
• Page 6
  Datalogic or Datalogic’s third party licensors and that the Software is protected by intellectual property laws and treaties. The license set forth in this Agreement does not transfer to End User any ownership of Datalogic’ s or its third party licen- sors’ copyrights, patents, trademarks, service marks, trade secrets, or other intel- lectual property rights and End User shall have no right to commence any legal actions to obtain such rights.
• Page 7
  Datalogic ADC, Inc., Legal Department, 959 Terry Street, Eugene, OR 97402. 7.2 In the defense or settlement of any such claim, Datalogic may, at its option, 1) procure for End User the right to continue using the Datalogic Product, 2)
• Page 8
  Notices to Datalogic shall be sent to the attention of Contract Administration, Datalogic ADC, Inc., 959 Terry Street, Eugene, OR 97402, or such other address as may be specified by Datalogic in writing.
• Page 9
  QuickScan™ QBT2400 Description With rich feature sets and extensive options, the QuickScan™ product series from Datalogic represents the premium level of data collection equipment for general purpose applications. The QuickScan QBT2400 readers have enhanced optics with improved motion tolerance allowing codes placed on fast…
• Page 10
  Setting Up the Reader Setting Up the Reader Follow the steps below to connect and get your reader up, and communicating with its host. Configure the Base Station starting on this page. Charge the Batteries (see page 8). Link to the Base Station (see page 14). Select the Interface Type (see page 24).
• Page 11
  Setting Up the Reader Figure 1. Lock lever disengaged Engage the locking mechanism by pushing up the lever as far as it will go. Figure 2. Lever in locked position it is good practice to put the scanner in the locked condition at the end of the working shift, or when not in use for an extended period of time.
• Page 12
  Connecting the Base Station Connecting the Base Station Figure 3 on page 5 shows how to connect the Base Station to a terminal, PC or other host device. Turn off the host before connection and consult the manual for that equipment (if necessary) before proceeding.
• Page 13
  Connecting the Base Station After the cables are plugged in, reinsert the Cable Stop- per. Cable Stopper reinserted Connect to an AC Adapter, and plug the AC power cord into the (wall) outlet. Figure 3. Connecting the Base Station Wall plug Connector I/F Cable AC/DC…
• Page 14
  Connecting the Base Station Most connections plug directly into the host device as shown Figure 4. Keyboard Wedge interface cables have a ‘Y’ con- nection where its female end mates with the male end of the cable from the keyboard and the remaining e.nd at the key- board port on the terminal/PC.
• Page 15
  Connecting the Base Station Using the BC2030™ Radio Base Radio Base LEDs LEDs on the QuickScan Base provide information about the Base as well as battery charging status, as shown in Figure Figure 6. QuickScan Base LEDs YELLOW LED RED LED / GREEN LED Table 1.
• Page 16
  Table 1 on page 7) will indi- cate the status of the battery. Before using the Battery, read “Battery Safety” in the following section. Datalogic recommends annual replacement of rechargeable battery packs to ensure maximum performance. Battery Safety To install, charge and/or perform any other action on the bat- tery, follow the instructions in this manual.
• Page 17
  40°C) temperature range. CAUTION Use only the authorized power supplies, bat- tery pack, chargers, and docks supplied by your Datalogic reseller. The use of any other power supplies can damage the device and CAUTION void your warranty. Do not disassemble or modify the battery. The…
• Page 18
  Connecting the Base Station Do not place the battery in or near fire, on stoves or other high temperature locations. Do not place the battery in direct sunlight, or use or store the battery inside cars in hot CAUTION weather. Doing so may cause the battery to generate heat, explode or ignite.
• Page 19
  China regulatory and other laws and regulations about the environment. Replacing the Battery Pack Before proceeding, read “Battery Safety” on the preceding pages. Datalogic recommends annual replacement of rechargeable battery packs to ensure maximum performance. Using a coin or screwdriver, unscrew the bottom of the battery pack until it is disengaged.
• Page 20
  Connecting the Base Station Extract the battery pack by slightly rotating the pack and pulling away from the reader. To mount the new battery pack reverse the process: Insert the top of the new pack inside the reader’s han- dle. Rotate the battery pack downward while pressing the bottom side of the battery pack (to seat securely into the contacts springs) so that the edges of the pack and…
• Page 21
  LED indicator. Reference the QuickScan Q2400 Product Reference Guide (PRG) on the Datalogic website for more information about this feature and other programmable settings. Quick Reference Guide…
• Page 22
  Linking the Reader Linking the Reader Link Datalogic RF Devices to Base For RF devices, before configuring the interface it is nec- essary to link the handheld with the base. To link the handheld and the base, press the trigger to wake up the handheld and mount it into the base.
• Page 23
  Link to PC in HID label below.. Use the host computer’s Bluetooth manager to “Discover new devices” and select «Datalogic Scanner.» If you receive an error message, it may be necessary to disable security on the device. Use a text editor to see incoming data on the port designated by the computer’s Bluetooth manager..
• Page 24
  Linking the Reader Variable PIN Code Some Bluetooth drivers on the Host (such as WIDCOMM and BlueSoleil require a Variable PIN Code. When attempting connection, the application presents a window that includes a PIN Code which is to be input using the QBT2400.
• Page 25
  After scanning the interface bar code from the Interfaces section, select other options and customize your reader through use of the programming bar codes avail- able in the Product Reference Guide (PRG) or Datalogic Alad- din™ configuration software (both available on the Datalogic website).
• Page 26
  Programming HID Alt Mode Read the configuration command label below for the HID Alt Mode feature. ENTER/EXIT PROGRAMMING MODE ♦ HID Alt Mode = OFF HID Alt Mode = ON Power Off Scan the bar code below to shut off power to the handheld until the next trigger pull.
• Page 27
  Country Mode Country Mode The following bar codes can be used either while in HID mode (when reader is connected using Bluetooth) or for configuring the base. HID configuration: Scan any one of the bar codes in the table the country for which your PC is localized. below to set Base configuration: Only the following interfaces support…
• Page 28
  Country Mode COUNTRY MODE (continued) Country Mode = Croatia* Country Mode = Czech Republic* Country Mode = Denmark* Country Mode = France Country Mode = French Canadian* Country Mode = Germany *Supports only the interfaces listed in the Country Mode feature description (Base configuration only) QuickScan™…
• Page 29
  Country Mode COUNTRY MODE (continued) Country Mode = Hungary* Country Mode = Italy Country Mode = Japanese 106-key* Country Mode = Lithuanian* Country Mode = Norway* Country Mode = Poland* *Supports only the interfaces listed in the Country Mode feature description (Base configuration only) Quick Reference Guide…
• Page 30
  Country Mode COUNTRY MODE (continued) Country Mode = Portugal* Country Mode = Romania* Country Mode = Spain Country Mode = Sweden Country Mode = Slovakia* Country Mode = Switzerland* *Supports only the interfaces listed in the Country Mode feature description (Base configuration only) QuickScan™…
• Page 31
  Caps Lock State Caps Lock State The following bar codes can be used either while in HID mode (when reader is connected using Bluetooth) or for configuring the base. This option specifies the format in which the reader sends character data. When using the Base Interface, this applies only to keyboard wedge interfaces.
• Page 32
  Selecting the Base Interface Type Selecting the Base Interface Type Upon completing the physical connection between the base and its host, proceed directly to Interface Selection below for information and programming for the interface type the base is connected to (for example: RS-232, Keyboard Wedge, USB, etc.) and scan the appropriate bar code to select your sys- tem’s correct interface type.
• Page 33
  Select RS232-WN RS-232 for use with OPOS/UPOS/JavaPOS Select RS-232 OPOS USB COM to simulate RS-232 standard interface Select USB-COM-STD a. Download the correct USB COM driver from www.datalogic.com USB-OEM USB-OEM (can be used for OPOS/UPOS/JavaPOS) Select USB-OEM Quick Reference Guide…
• Page 34
  Selecting the Base Interface Type Keyboard Interface Use the programming bar codes to select options for USB Keyboard and Wedge Interfaces. KEYBOARD AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/ Standard Key Encoding Select KBD-AT Keyboard Wedge for IBM AT PS2 with standard key encoding but without external keyboard Select KBD-AT-NK…
• Page 35
  Selecting the Base Interface Type KEYBOARD (continued) PC/XT w/Standard Key Encoding Select KBD-XT Keyboard Wedge for IBM Terminal 3153 Select KBD-IBM-3153 Keyboard Wedge for IBM Terminals 31xx, 32xx, 34xx, 37xx make only keyboard Select KBD-IBM-M Keyboard Wedge for IBM Terminals 31xx, 32xx, 34xx, 37xx make break keyboard Select KBD-IBM-MB USB Keyboard with alternate key encoding…
• Page 36
  Selecting the Base Interface Type KEYBOARD (continued) USB Keyboard for Apple computers Select USB-KBD-APPLE Keyboard Wedge for DIGITAL Terminals VT2xx, VT3xx, VT4xx Select KBD-DIG-VT USB Keyboard with standard key encoding Select USB Keyboard Scancode Tables Reference the QuickScan™ PRG for information about control character emulation which applies to keyboard interfaces.
• Page 37
  Reading Parameters Numlock This option specifies the setting of the Numbers Lock (Num- lock) key while in keyboard wedge interface. This only applies to alternate key encoding interfaces. It does not apply to USB keyboard. ENTER/EXIT PROGRAMMING MODE Numlock = Numlock key unchanged Numlock = Numlock key toggled Reading Parameters Point the reader at the target and pull the trigger to enable…
• Page 38
  Reading Parameters Good Read Green Spot Duration Successful reading can be signaled by a good read green spot. Use the bar codes below to specify the duration of the good read pointer beam after a good read. ENTER/EXIT PROGRAMMING MODE Green Spot Duration = Disable (Green Spot is Off) ♦…
• Page 39
  Scan Modes Scan Modes The imager can operate in one of several scanning modes. Trigger Single — When the trigger is pulled, scanning is acti- vated until one of the following occurs: • a programmable duration has elapsed • a label has been read •…
• Page 40
  Scan Modes SCAN MODE ENTER/EXIT PROGRAMMING MODE ♦ Scan Mode = Trigger Single Scan Mode = Trigger Hold Multiple Scan Mode = Trigger Pulse Multiple Scan Mode = Flashing Scan Mode = Always On Scan Mode = Stand Mode QuickScan™ QBT2400…
• Page 41
  Scan Modes Pick Mode Pick Mode is a Decoding and Transmission process where bar codes that are not within the configurable distance from the center of the aiming pattern are not acknowledged or trans- mitted to the host. It is active only while the scanner is in Trigger Single mode.
• Page 42
  Technical Specifications Technical Specifications The following table contains Physical and Performance Char- acteristics, User Environment and Regulatory information. Physical Characteristics Color White or Black Height 6.4”/163 mm Dimensions Length 3.6”/91 mm Width 1.6”/41 mm Approximately Weight (without 200 g (reader) cable) 230 g (base charger) Electrical Characteristics…
• Page 43
  Technical Specifications Performance Characteristics Light Source LEDs Roll (Tilt) Angle Up to ± 180° Pitch Angle ± 40° Skew (Yaw) Angle ± 40° Field of View 40° H x 26° V a. Charge Times are much lower when battery is within daily typical operat- ing condition.
• Page 44
  Code 128; Code 128 ISBT; Interleaved 2 of 5; Standard 2 of 5; Inter- leaved 2 of 5 CIP (HR); Industrial 2 of 5; Discrete 2 of 5; Datalogic 2 of 5 (China Post Code/Chinese 2 of 5); IATA 2of5 Air cargo code;…
• Page 45
  Technical Specifications User Environment Operating 32° to 122° F (0° to 50° C) Temperature Charging 32° to 104° F (0° to 40° C) Temperature Storage -4° to 158° F (-20° to 70° C) Temperature Operating: 5% to 90% relative humidity, Humidity non-condensing Scanner withstands 18 drops from 1.5 m…
• Page 46
  LED and Beeper Indications LED and Beeper Indications The reader’s beeper sounds and its LED illuminates to indi- cate various functions or errors on the reader. An optional “Green Spot” also performs useful functions. The following tables list these indications. One exception to the behaviors listed in the tables is that the reader’s functions are program- mable, and so may or may not be turned on.
• Page 47
  LED and Beeper Indications Indication Description Beeper Upon successful read of a label, the Green Spot software shall turn flashes the green spot on momentarily for the time speci- fied by the config- ured value. Except when in sleep mode or when a Good Read LED Duration other than 00 is selected Programming Mode — The following indications ONLY occur when…
• Page 48
  Error Codes Error Codes Upon startup, if the reader sounds a long tone, this means the reader has not passed its automatic Selftest and has entered FRU (Field Replaceable Unit) isolation mode. If the reader is reset, the sequence will be repeated. The following table describes the LED flashes/beep codes associated with an error found.
• Page 49
  Any changes or modifications to equipment, not expressly approved by Datalogic could void the user’s authority to oper- ate the equipment. Statement of Agency Compliance This device complies with part 15 of the FCC Rules. Operation…
• Page 50
  Regulatory Information FCC RF Radiation Exposure Statement Exposure to Radio-Frequency Radiation CAUTION To comply with FCC RF exposure compliance requirements, for mobile configurations, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons.
• Page 51
  Regulatory Information Power Supply This device is intended to be connected to a UL Listed/CSA Certified computer which supplies power directly to the reader or else be supplied by UL Listed/CSA Certified Power Unit marked “Class 2” or LPS power source rated 5-14V mini- mum 900mA, which supplies power directly to the Base/ Charger via the power connector of the Base itself.
• Page 52
  Regulatory Information China RoHS Table of Restricted Elements QuickScan™ QBT2400…
• Page 53
  Spanish Si desea información acerca de los procedimientos para el desecho de los residuos del equipo eléctrico y electrónico (WEEE), visite la página Web www.datalogic.com. Portuguese Para informações sobre a disposição de Sucatagem de Equipamentos Elétricos e Eletrônicos (WEEE -Waste Electrical and Electronic Equipment), consultar o site web www.datalogic.com.
• Page 54
  Datalogic ADC (“Datalogic”) hardware products are warranted against defects in material and workmanship under normal and proper use. The liability of Datalogic under this warranty is limited to furnishing the labor and parts necessary to rem- edy any defect covered by this warranty and restore the prod- uct to its normal operating condition.
• Page 55
  Datalogic shall pay for the return of the product to Customer if the shipment is to a loca- tion within the country in which the Datalogic service center is located. Customer shall be responsible for paying all shipping charges, duties, taxes, and any other charges for products returned to any other locations.
• Page 56
  No attempted assignment or transfer in violation of this provision shall be valid or binding upon Datalogic. DATALOGIC’ S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, ORAL OR WRITTEN, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITA- TION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FIT- NESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT.
• Page 57
  Ergonomic Recommendations Ergonomic Recommendations In order to avoid or minimize the potential risk of ergonomic injury follow the recommenda- tions below. Consult with your local Health & Safety Manager to ensure that you are adhering CAUTION to your company’s safety programs to prevent employee injury.
• Page 58
  Cleaning Cleaning Exterior surfaces and scan windows exposed to spills, smudges or debris require periodic cleaning to ensure best performance during scanning operations. Contacts on the scanner and the base should also be cleaned as needed to ensure a good connection. Be sure to unplug the reader and base before cleaning.
• Page 59
  Services and Support Services and Support Datalogic provides several services as well as technical sup- www.datalogic.com port through its website. Log on to click on the links indicated for further information. Products Search through the links to arrive at your product page where Manuals Software &…
• Page 60
  Hex-Numeric Keypad Hex-Numeric Keypad Use the bar codes that follow to enter numbers as you would select digits/characters from a keypad. QuickScan™ QBT2400…
• Page 61
  Hex-Numeric Keypad Hex-Numeric Keypad (continued) Quick Reference Guide…
• Page 62
  Hex-Numeric Keypad Hex-Numeric Keypad (continued) For HID Variable Pin Code only If you make a mistake, scan the CANCEL barcode below to abort and not save the entry string. You can then restart. Cancel an incomplete HID Variable PIN Code Finish by scanning the Exit HID Variable PIN Code label.
• Page 63
  La presente dichiarazione di conformità è rilasciata sotto la responsabilità esclusiva di Datalogic ADC Srl per: This Declaration of Conformity is issued under the sole responsibility of Datalogic ADC Srl for: Cette déclaration de conformité est établie sous la seule responsabilité de Datalogic Srl pour: Diese Konformitätserklärung wird unter der alleinigen Verantwortung des Datalogic ADC Srl…
• Page 64
  ©2014 Datalogic ADC, Inc. • All rights reserved. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. Datalogic ADC, Inc. 959 Terry Street Eugene |OR 97402 Telephone: (1) 541-683-5700…

1. Manuals
2. Brands
3. Datalogic Manuals
4. Barcode Reader
5. QuickScan BC2030

Manuals and User Guides for Datalogic QuickScan BC2030. We have 1 Datalogic QuickScan BC2030 manual available for free PDF download: Quick Reference Manual

Загрузки

80101737 CB Test Certificate CA28233CSA

80101737 CB Test Certificate CA28233CSA EBC Rev. 1

pdf

0,31 Mb

8059787-80083891 CB Test certificate_CA27768CSA

8059787-80083891 CB Test certificate_CA27768CSA Rev. 1

pdf

0,51 Mb

CB62368-1 SC5100-xxxx US-37260-UL

Rev. 1

pdf

0,18 Mb

RH2121215

RH2121215 Rev. 1

pdf

0,1 Mb

CE1360_0 — MATRIX 320 EBC

CE1360_0 — MATRIX 320 EBC Rev. 1

pdf

0,11 Mb

EC501_1_POWERSCAN_PM9100+BC9XY0

Rev. 1

pdf

0,08 Mb

EC502_1_POWERSCAN_PBT9100+BC9XY0-BT

Rev. 1

pdf

0,07 Mb

EC175_1_POWERSCAN_PM9300+BC9XY0

Rev. 1

pdf

0,08 Mb

EC173H_4_POWERSCAN_PBT9300+BC9XY0-BT

Rev. 1

pdf

0,07 Mb

EC600_1_POWERSCAN_PD9531

Rev. 1

pdf

0,07 Mb

EC683_3_POWERSCAN_PBT9501+BC9XY0-BT

Rev. 1

pdf

0,07 Mb

EC684_1_POWERSCAN_PM9501+BC9XY0

Rev. 1

pdf

0,08 Mb

EC114_4_QUICKSCAN_QM2400+BC2030

Rev. 1

pdf

0,07 Mb

EC137_4_QUICKSCAN_QM2101+BC2030

Rev. 1

pdf

0,07 Mb

EC113_6_QUICKSCAN_QBT2400_+_BC2030-BT

Rev. 1

pdf

0,07 Mb

EC136_4_QUICKSCAN_QBT2101+BC2030-BT

Rev. 1

pdf

0,07 Mb

EC952_1_GRYPHON_GD4200

Rev. 1

pdf

0,07 Mb

EC601_1_GRYPHON_GD4500

Rev. 1

pdf

0,07 Mb

EC067_7_QUICKSCAN_LITE_QW2100

Rev. 1

pdf

0,07 Mb

EC085_5_QUICKSCAN_QD2430

Rev. 1

pdf

0,07 Mb

EC485_1_QUICKSCAN_QW2400

Rev. 1

pdf

0,07 Mb

EC140H_3_QUICKSCAN_QD21X1

Rev. 1

pdf

0,07 Mb

EC966_3_GRYPHON_GM4200_+_WLC4190

Rev. 1

pdf

0,08 Mb

EC632_3_GRYPHON_GM45XX_+_WLC4090

Rev. 1

pdf

0,08 Mb

EC967_3_GRYPHON_GBT4200+WLC4190

Rev. 1

pdf

0,08 Mb

EC633_3_GRYPHON_GBT45XX+WLC4090-BT

Rev. 1

pdf

0,08 Mb

2128P CE Declaration of Conformity

Rev. 1

pdf

0,19 Mb

EC161H_5_DBT6400+BC6020

Rev. 1

pdf

0,07 Mb

EC683_3_POWERSCAN_PBT9501+BC9XY0-BT

Rev. 1

pdf

0,07 Mb

EC1048_1_HS7500

Rev. 1

pdf

0,07 Mb

EC1049_1_GW-HS7500

Rev. 1

pdf

0,07 Mb

EC1132_1_QD2500

Rev. 1

pdf

0,07 Mb

EC1274_1_QW2500

Rev. 1

pdf

0,07 Mb

EC-118-HD313x rev 4

Rev. 1

pdf

0,13 Mb

CE558_2 — SKORPIO X4_7A43

Rev. 1

pdf

0,14 Mb

CE583-2-FALCON X4_0369

Rev. 1

pdf

0,15 Mb

EC_405_1_Rhino II_72C6

Rev. 1

pdf

0,15 Mb

CoFC_80101738_EN

CoFC_80101738_EN EBC Rev. 1

pdf

0,16 Mb

EAC — SC5100

Rev. 1

pdf

2,29 Mb

KCC-SC5100-100S

Rev. 1

pdf

0,28 Mb

KCC-SC5000

Rev. 1

pdf

0,36 Mb

KC Certificate LTM 002-253 (updated)

KC Certificate LTM 002-253 (updated) Rev. 1

pdf

0,2 Mb

KC Certificate Matrix 320 700-030

KC Certificate Matrix 320 700-030 Rev. 1

pdf

0,28 Mb

KC Certificate LTM 002-004

KC Certificate LTM 002-004 Rev. 1

pdf

0,28 Mb

KC Certificate LTM 002-253

KC Certificate LTM 002-253 Rev. 1

pdf

0,28 Mb

KC Certificate_210528_STS320-016

KC Certificate_210528_STS320-016 Rev. 1

pdf

0,2 Mb

KC Certificate_210528_STS320-116

KC Certificate_210528_STS320-116 Rev. 1

pdf

0,2 Mb

KC Certificate_LTM 002-250_210506

KC Certificate_LTM 002-250_210506 Rev. 1

pdf

0,22 Mb

KC Certificate_LTM 002-251_210506

KC Certificate_LTM 002-251_210506 Rev. 1

pdf

0,22 Mb

KC Certificate_LTM 002-252_210506

KC Certificate_LTM 002-252_210506 Rev. 1

pdf

0,2 Mb

c02-suppliers_declaration_of_conformity M320 EBC

c02-suppliers_declaration_of_conformity M320 EBC Rev. 1

pdf

0,29 Mb

Morocco D of C MATRIX 320 EBC

Morocco D of C MATRIX 320 EBC Rev. 1

pdf

0,23 Mb

c02-suppliers_declaration_of_conformity M320

RCM c02-suppliers_declaration_of_conformity M320 Rev. 1

pdf

0,29 Mb

Morocco D of C STS 320 ATS 320

Morocco D of C STS 320 ATS 320 Rev. 1

pdf

0,23 Mb

Morocco D of C MATRIX 410 MATRIX 410N

Morocco D of C MATRIX 410 MATRIX 410N Rev. 1

pdf

0,22 Mb

RoHS-Reach_SC5100

Rev. 1

pdf

0,1 Mb

UK501_1_POWERSCAN_PM9100+BC9XY0

Rev. 1

pdf

0,09 Mb

UK502_1_POWERSCAN_PBT9100+BC9XY0-BT

Rev. 1

pdf

0,09 Mb

UK175_1_POWERSCAN_PM9300+BC9XY0

Rev. 1

pdf

0,09 Mb

UK173H_4_POWERSCAN_PBT9300+BC9XY0-BT

Rev. 1

pdf

0,09 Mb

UK683_3_POWERSCAN_PBT9501+BC9XY0-BT

Rev. 1

pdf

0,09 Mb

UK684_1_POWERSCAN_PM9501+BC9XY0

Rev. 1

pdf

0,09 Mb

UK114_4_QUICKSCAN_QM2400+BC2030

Rev. 1

pdf

0,09 Mb

UK137_4_QUICKSCAN_QM2101+BC2030

Rev. 1

pdf

0,09 Mb

UK113_6_QUICKSCAN_QBT2400_+_BC2030-BT

Rev. 1

pdf

0,09 Mb

UK136_4_QUICKSCAN_QBT2101+BC2030-BT

Rev. 1

pdf

0,09 Mb

UK952_1_GRYPHON_GD4200

Rev. 1

pdf

0,09 Mb

UK601_1_GRYPHON_GD4500

Rev. 1

pdf

0,09 Mb

UK067_7_QUICKSCAN_LITE_QW2100

Rev. 1

pdf

0,09 Mb

UK085_5_QUICKSCAN_QD2430

Rev. 1

pdf

0,09 Mb

UK485_1_QUICKSCAN_QW2400

Rev. 1

pdf

0,09 Mb

UK140H_3_QUICKSCAN_QD21X1

Rev. 1

pdf

0,09 Mb

UK633_3_GRYPHON_GBT45XX+WLC4090-BT

Rev. 1

pdf

0,09 Mb

UK632_3_GRYPHON_GM45XX_+_WLC4090

Rev. 1

pdf

0,09 Mb

2128P UKCA Declaration of Conformity

Rev. 1

pdf

0,19 Mb

UK1132_1_QD2500

Rev. 1

pdf

0,09 Mb

UK1274_1_QW2500

Rev. 1

pdf

0,09 Mb

UL-AREX400

Rev. 1

pdf

0,29 Mb

Причины купить Datalogic BC2030-BK-BT в интернет-магазине TEHPOS

• Гарантия низких цен и быстрая доставка
• Вы можете купить Datalogic BC2030-BK-BT по выгодной цене с доставкой или оформить самовывоз с нашего склада
• Предпродажная подготовка б/у оборудования и гарантия на все товары от 3 до 24 месяцев
• Служба техподдержки для решения любых вопросов
• Нашли дешевле? Сообщите нам любым удобным способом и мы постараемся сделать более выгодное предложение!

Купить Datalogic BC2030-BK-BT совсем несложно — добавьте его в корзину и оформите заказ в интернет-магазине TEHPOS или по телефону . В карточке товара посмотрите фото, отзывы покупателей и подробные характеристики, чтобы не промахнуться с выбором. Если нужны инструкция по применению или настройке для Datalogic BC2030-BK-BT, руководство пользователя или программное обеспечение — скачайте их во вкладке «Загрузки».

В Бахчисарай, Джанкой, Евпатория, Керчь, Симферополь, Севастополь, Феодосия, Черноморское, Ялта и другие населенные пункты Республики Крым доставка занимает не более 5 дней! Доставка в Сочи не более 3 дней.

Для тех, кто хочет купить Datalogic BC2030-BK-BT оптом, мы предлагаем выгодные условия — подробности уточняйте у менеджеров по телефону или отправьте запрос через форму обратной связи.