Dhi nkb1000 инструкция на русском

Quick Links

• Page 1
  Keyboard Overview Solution Operation…
• Page 2
  Keyboard Overview…
• Page 3
  Overview — Appearance LCD Display Panel Common Area DVR Area PTZ Camera Area Joystick LED Indicator…
• Page 4
  Overview — Interface NKB1000 KBD1000 KB1000…
• Page 5
  Solution…
• Page 6
  Keyboard to controls PTZ cameras keyboard controls max. PTZ cameras. RS485 Connection … All 3 models 2048 keyboard controls max. PTZ cameras. Network Connection Network … NKB1000 only…
• Page 7
  Keyboard to controls DVR/NVR keyboard controls max. DVR/NVR. RS232 Connection NKB/KBD1000 only 2048 keyboard controls max. DVR/NVRs. Network Connection Network NKB1000 only…
• Page 8
  Keyboard to controls DVR/NVR keyboard controls max. DVR/NVRs. RS485-RS232 Box All 3 models   1 keyboard 32 RS485-RS232 boxes, 1 RS485-RS232 box 12 RS232 connections…
• Page 9
  Keyboard to controls SmartPSS keyboard controls max. USB to SmartPSS NKB1000 only…
• Page 10
  Commonly Used Operations…
• Page 11
  Adding devices to keyboard Zones “zone” list zone Tips: Every device that needs to be controlled by keyboard must be added as a “ ” first.
• Page 12
  Menu of Keyboard This menu is for configuring the network for the keyboard (NKB1000 only). This menu is for adding a device (zone) to the keyboard control list. This menu is for controlling the device after you added the device to the keyboard.
• Page 13
  Adding Zones After you’ve entered the “zone” menu. You’ll see the following parts: ID: This is the id of zones, you can set any number between 0~2048. Name: This is the name of zones, you can set any name with characters and digital numbers. Type: This is the type, you can choose DVR, NVR, SD, etc.
• Page 14
  Commonly Used Operations … Control PTZ Camera (HDCVI/Analog/IP) Network ……
• Page 15
  Link: COM485 485Addr: 100 Rule: PELCOD BaudRate: 9600 Note: you can set any ID or Name, but should set other parts based on the actual DataBit: 8 configuration of the PTZ camera. Parity: None RS485connection is available for NKB1000/KBD1000/KB1000. StopBit: 1…
• Page 16
  Type: SD Link: NET IPAddr: 10.15.7.3 Port: 37777 Rule: DH-2 Note: you can set any ID or Name, but should set other parts based PW: qwerty on the actual settings of the PTZ camera. Network connection is only available for NKB1000.
• Page 17
  Controlling PTZ Cameras After you’ve added the PTZ camera to the “zone” list of the keyboard. Enter the “Zone Control” menu, input the ID of the PTZ camera, click “ENTER”, the keyboard will connect to the PTZ camera and show the following interface. You can also choose other ways to connect: name, address, etc.
• Page 18
  Controlling PTZ Cameras — Operation OTHER: Speed dome OSD menu PRESET: Set/call preset SCAN: Set/call scan PAN: Call pan TOUR: Set/call tour PATTERN: Set/call pattern Pan/Tilt/Zoom IRIS: control the aperture FOCUS: control the focus ZOOM: zoom in/out…
• Page 19
  Commonly Used Operations Control DVR/NVRs Network…
• Page 20
  Controlling DVR/NVRs – Via Network — Setup Network Connect the keyboard and the DVR/NVR to the same network.
• Page 21
  Controlling DVR/NVRs – Via Network — Setup Check the IP address and the port number of the DVR/NVR.
• Page 22
  Controlling DVR/NVRs – Via Network — Setup ID: 1 Name: MyDVR Type: NVR Link: NET IPAddr: 10.15.6.108 Add the DVR/NVR as a “zone” in the keyboard. Port: 37777 Rule: DH-2 PW: admin…
• Page 23
  Controlling DVR/NVRs – Via RS232 — Setup Connect RS232 cable directly from keyboard to DVR/NVR.
• Page 24
  Controlling DVR/NVRs – Via RS232 — Setup Check the address of the DVR/NVR in its menu.
• Page 25
  Controlling DVR/NVRs – Via RS232 — Setup Check the RS232 configuration of the DVR/NVR.
• Page 26
  Controlling DVR/NVRs – Via RS232 — Setup ID: 1 Name: MyDVR Type: DVR Link: COM232 Add the DVR/NVR as a “zone” in the keyboard. 232Addr: 8 Rule: DH-2 BaudRate: 9600 DataBit: 8 Parity: None StopBit: 1…
• Page 27
  Connecting DVR/NVR After you’ve added the DVR/NVR to the “zone” list of the keyboard. Enter the “Zone Control” menu, input the ID of the DVR/NVR, click “ENTER”, the keyboard will connect to the DVR/NVR.
• Page 28
  Operation Joystick up/down: switch among different display layout, such as 1/4/6/8/9/16/25 split, etc.
• Page 29
  Operation Joystick left/right: switch cameras under current display spit. e.g. : When it’s display 1-4 channels in 4-split, move the joystick right direction will display 5-8 channels in 4-split.
• Page 30
  Operation NUM + MULT: change different split. e.g. : 8+MULT will change the DVR/NVR to 8 split.
• Page 31
  Operation NUM + CAM: choose specific channel to display in full- screen mode. e.g. : 1+CAM will put channel 1 in full-screen.
• Page 32
  Operation NUM + PTZ: control PTZ for specific channel. e.g. : suppose channel 5 of DVR/NVR is connected to a PTZ camera, then 5+PTZ will put the camera in full-screen mode and you can use the joystick to control PTZ operations, also to see the OSD menu, set preset, tour and etc.
• Page 33
  Operation For more specific operations on DVR/NVR, please refer to the user’s manual of NKB1000/KBD1000/KB1000.
• Page 34
  Commonly Used Operations Control SmartPSS…
• Page 35
  Controlling SmartPSS via USB After connecting NKB1000 to the PC, start SmartPSS software, it will detect the keyboard automatically.
• Page 36
  Controlling SmartPSS via USB When adding devices in SmartPSS, click the keyboard icon, you can edit the number of all channels. You can use this number to Step 2 quickly switch between different cameras. Step 1…
• Page 37
  Controlling SmartPSS via USB — Preview NUM + MULT: choose specific screen layout, e.g., 8 + MULT choose 8 split display.
• Page 38
  Controlling SmartPSS via USB — Preview “8+MULT”…
• Page 39
  Controlling SmartPSS via USB — Preview NUM + ID: choose specific window, e.g., 3 + ID choose the 3 window. You can also use the joystick to choose a window.
• Page 40
  Controlling SmartPSS via USB — Preview “3+ID”…
• Page 41
  Controlling SmartPSS via USB — Preview NUM + CAM: choose specific camera to display in current selected window. ENTER: switch current window between full screen and current display mode.
• Page 42
  Controlling SmartPSS via USB — Preview “1+CAM” “ENTER” Click “ENTER” again…
• Page 43
  Controlling SmartPSS via USB — Preview PTZ: if current window is displaying video from a PTZ camera, use this key to enter PTZ control for it.
• Page 44
  Controlling SmartPSS via USB — Preview OTHER: Speed dome OSD menu PRESET: Set/call preset SCAN: Set/call scan PAN: Call pan TOUR: Set/call tour PATTERN: Set/call pattern Pan/Tilt/Zoom IRIS: control the aperture FOCUS: control the focus ZOOM: zoom in/out…

Технические характеристики Dahua DHI-NKB1000

• ЖК-дисплей

  Да

• Джойстик

  Да

• Интерфейс

  Coaxitron, RS-485, RJ45

Основные характеристики

• Кнопки управления

  Электромеханические

• Джойстик управления

  3-осевой

• Интерфейсы

  RJ-45, RS232, RS485, RS422, USB

• Подключение

  По сети, прямое подключение

• Прямое подключение

  Интерфейс: RS232/RS485; Протокол: DH2/ DH-SD/PELCO-D/PELCO-P/PELCO-D1/PELCO-P

• Подключение по сети

  Интерфейс: RJ45; Подключение: IP адрес/порт/протокол

• Дисплей

  LCD, 75.2мм × 33.85мм

Электропитание

• Питание

  Вход.: AC 100~230В; 50~60Гц, выход.: 12В/1А

• Потребление

  До 5Вт

Условия Эксплуатации

• Рабочие условия

  -10 ~ +55°C, относительная влажность 10%~90%

Общие данные

• Размеры

  330мм × 160мм × 37.5мм

• Вес

  2.5кг

Вес
2.5кг

Джойстик
Да

Джойстик управления
3-осевой

Дисплей
LCD, 75.2мм × 33.85мм

ЖК-дисплей
Да

Интерфейс
Coaxitron, RS-485, RJ45

Интерфейсы
RJ-45, RS232, RS485, RS422, USB

Кнопки управления
Электромеханические

Питание
Вход.: AC 100~230В; 50~60Гц, выход.: 12В/1А

Подключение
По сети, прямое подключение

Подключение по сети
Интерфейс: RJ45; Подключение: IP адрес/порт/протокол

Потребление
До 5Вт

Прямое подключение
Интерфейс: RS232/RS485; Протокол: DH2/ DH-SD/PELCO-D/PELCO-P/PELCO-D1/PELCO-P

Рабочие условия
-10 ~ +55°C, относительная влажность 10%~90%

Размеры
330мм × 160мм × 37.5мм