Dns 320 инструкция на русском

• Page 1
  Version 1.0 | 08/28/2012 User Manual ShareCenter 2-Bay Network Storage Enclosure DNS-320…

• Page 2: Table Of Contents

  Deleting a Group ……….105 Web UI Login …………….36 Quotas …………… 106 Web UI General Layout ………….37 Network Shares …………111 Home ………………37 Add/Modify Network Shares Wizard ..112 Applications …………..38 Deleting a Network Share ……119 Management …………..39 D-Link ShareCenter DNS-320 User Manual…

• Page 3
  MTP Backups …………. 188 System Settings …………. 158 USB Backups …………. 188 Power Management ……….159 MTP Backup Process……..189 Notifications …………161 USB Backup Process ……..191 Email Settings ……….. 161 P2P Downloads …………193 D-Link ShareCenter DNS-320 User Manual…
• Page 4
  Creating an AWS Account ……197 Knowledge Base …………202 What is RAID? …………….202 RAID Options …………..204 UPS Connectivity …………..206 Deleting a UPS Slave …………210 USB Print Server …………… 212 Warranty ……………..215 D-Link ShareCenter DNS-320 User Manual…

• Page 5: Product Overview

  The new drive will then be re-mirrored, allowing the DNS-320 to return to its full protection. 1 Hard Drive(s) not included. 2 D-Link cannot guarantee full compatibility or proper playback with all codecs. Playback capability depends on the codec support of the UPnP™ AV media player. D-Link ShareCenter DNS-320 User Manual…

• Page 6: Before You Begin

  • Mac OS® X 10.5.6 or greater • 3.5” SATA Hard Drive(s) Package Contents • D-Link ShareCenter® DNS-320 • CD-ROM with Manual and Software • Quick Installation Guide • 12V/3A Output Power Adapter • CAT5E Ethernet Cable D-Link ShareCenter DNS-320 User Manual…

• Page 7: Features

  Features The ShareCenter® DNS-320 is an easy to install data storage platform used for remote access through a local network or from the Internet. This ShareCenter® supports up to 2 SATA hard drives and includes the product features listed below: „…

• Page 8
  „ Supports Multilingual GUI Backup Management „ Web Browsers Supported • Schedule Backup from PC to NAS (D-Link ShareCenter Sync) • Internet Explorer 7+ • Apple Time Machine support • Mozilla Firefox 3+ • Local Backup • Apple Safari 4+ •…

• Page 9: Checking The Hardware Requirements

  Section 1 — Product Overview Checking the Hardware Requirements To use your DNS-320, you will need at least one hard drive. If you plan to use RAID 1, which protects your data against one hard drive failure, you will need two hard drives.

• Page 10: Hardware Overview

  Press once to activate USB or press and hold to release USB activity. Left HDD/ Indicates the position of the drive (Left or Right) Right HDD LED Indicators Illuminates blue or red depending on activity (see the next page for details) D-Link ShareCenter DNS-320 User Manual…

• Page 11: Led Description

  HDD On/Off: Orange Light(s) — the hard drives are faulty No Light(s) — the hard drives are inactive HDD On/Off: Blue Light(s) — the hard drives are working Blinking Blue Light(s) — the HDD(s) is writing/reading D-Link ShareCenter DNS-320 User Manual…

• Page 12: Rear Panel (Connections)

  A single USB 2.0 (Type A) connector. The USB Host port is for Print Servers, USB memory disks, or USB UPS monitoring. Latch Press the latch to release the Top Panel and insert or remove the hard drives Security Lock Prevent theft by tying a lock to the ShareCenter NAS and a desk D-Link ShareCenter DNS-320 User Manual…

• Page 13: Bottom Panel

  COMPONENT DESCRIPTION Product Details Information about the product — DNS-320. Serial Number, Part Number, Manufacturer Number Reset Button Press and hold this button for more than 5 seconds to reset the unit to factory defaults. D-Link ShareCenter DNS-320 User Manual…

• Page 14: Top Panel (Levers)

  Section 1 — Product Overview Top Panel (Levers) Pull the handles to disconnect the hard drive(s) from the SATA sockets. Note: Remove the top cover before releasing the latches. D-Link ShareCenter DNS-320 User Manual…

• Page 15: Getting Started

  If a drive is not properly set in place, the hard drive LED will not illuminate after powering on the device. D-Link ShareCenter DNS-320 User Manual…

• Page 16
  Ensure the brackets are aligned so that when the hard drive is inserted, the arrow on the bracket points to the front of the ShareCenter. D-Link ShareCenter DNS-320 User Manual…
• Page 17
  Ethernet port. This cable should connect the ShareCenter to your local network via a router, switch, or directly to a computer for configuration (cross-over cable required). Step 7 — Connect the power adapter to the power receptacle. D-Link ShareCenter DNS-320 User Manual…

• Page 18: D-Link Storage Utility

  DHCP assigned IP address, the ShareCenter will be automatically assigned a 169.254.xxx.xxx address. It is recommended that you use the included D-Link Storage Utility software when accessing and configuring the ShareCenter for the first time. If you want to change the IP address before logging in or you are having trouble connecting to the ShareCenter IP address, you can use the Storage Utility software included on the product CD to locate the device on your network and make any necessary changes.

• Page 19
  ShareCenter. If your network is using a DHCP server and the computer receives IP settings from DHCP server, the ShareCenter will automatically be in the same subnet. D-Link ShareCenter DNS-320 User Manual…

• Page 20: Installation

  Note: Windows Firewall presents you with a warning message to unblock the device. Click Unblock to give your computer access to the NAS. Step 2 — Select the Language of your choice and then click the Start button. D-Link ShareCenter DNS-320 User Manual…

• Page 21
  Step 3 — Follow the instructions to remove the top cover of your ShareCenter. Click Next to continue. Step 4 — Attach the Hard Drives Bracket(s) to the side of the hard drives as indicated. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 22
  Section 3 — Installation Step 5 — Slide one, or two hard drive into an available hard drive bay of your ShareCenter. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 23
  Click Next to continue. Step 7 — Connect a CAT5 Ethernet cable to your ShareCenter and connect the other end to a switch or router (Local LAN). Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 24
  Step 9 — With the power on, press the Next button on the device and check and make sure the IP address of your ShareCenter matches what you see on the screen. Note: Allow 1-2 minutes for the DNS-320 to be recognized. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 25
  Step 11 — In this step you can create a new password for the Admin username. It is recommended you set a password, however you may also leave the fields blank. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 26
  Step 12 — You may either use Static IP or DHCP to configure the IP network settings of the ShareCenter. If you select Static IP, then enter the IP parameters as listed. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 27
  Step 14 — Click the Yes radio button if you already have a DDNS account to use for the ShareCenter DDNS. Click the No radio button and proceed to step 15 to obtain a new DDNS account. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 28
  Step 16 — Click Yes to go to a Wizard with instructions and links on how to obtain a free DDNS account. Click No skips the DDNS account setup wizard and transfers you back to the ShareCenter Setup Wizard. D-Link ShareCenter DNS-320 User Manual…
• Page 29
  Click Close to continue. Step 18 — Select your time zone and then set the time and date. You can set the time and date manually, from an NTP server, or from your computer. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 30
  If you do not want to configure your e-mail settings, click Skip to continue. Step 20 — This step is informational and shows any currently configured Volumes previously setup on the ShareCenter®. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 31
  Step 21 — Select one of the volume RAID types. Clicking on each RAID type radio button will display a description. For more information concerning the different RAID Disk Formats please refer to the Knowledge Base section in this manual. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 32
  Step 23 — Review the detailed summary of your volume configuration here before clicking next and starting the drive format. If necessary use the PREV button to go back and reconfigure the RAID configuration of the volume(s). Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 33
  Click Yes to proceed or No to exit. Click Next to continue. Step 25 — During the formatting process the wizard displays a percentage complete bar for each hard drive. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 34
  Section 3 — Installation Formatting Hard Drives Step 26 — The wizard will notify you when formatting has completed successfully. Click Next to continue. Step 27 — The Format is complete. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 35
  Wizard Complete Step 28 — The ShareCenter Setup Wizard is complete. Click Finish to exit the wizard and start using your DNS-320. Your ShareCenter is now installed and ready to use. If your drives are mapped using the wizard, you will be able to access them under your ‘My Computer’…

• Page 36: Mapping A Drive

  Begin by clicking on ‘Map network drive’. Step 2 — This screen shows some details on selecting a network drive. Click Browse to find your network. D-Link ShareCenter DNS-320 User Manual…

• Page 37
  Step 3 — Windows will automatically detect all devices on your network including your ShareCenter. Step 4 — Click on your ShareCenter to see the volumes you created earlier. Then select the volume that you wish to access and click OK. D-Link ShareCenter DNS-320 User Manual…
• Page 38
  Step 5 — After selecting your volume, click Finish to proceed. Step 6 — The drive will then appear in your Windows® Explorer under Network. This means the drive is active and ready for use. D-Link ShareCenter DNS-320 User Manual…

• Page 39: Configuration

  Configures local backups, Time Machine© settings, and USB backups P2P Downloads Configure your P2P downloads and control your download schedules My Files Access files on your NAS via a web browser Amazon S3 Create, modify, and delete your Amazon S3© settings D-Link ShareCenter DNS-320 User Manual…

• Page 40: Web Ui Login

  To access the Web UI, open a web browser, type in the IP address of your ShareCenter, and log in. You can find the IP address of your NAS by pressing the Next button on the front of the DNS-320.

• Page 41: Web Ui General Layout

  Section 4 — Configuration Web UI General Layout Home After logging in, the ShareCenter ‘Home’ tab will appear. You will see the Applications and Management tabs alongside of it. D-Link ShareCenter DNS-320 User Manual…

• Page 42: Applications

  Section 4 — Configuration Applications The Applications tab contains FTP/HTTP Downloads, Remote Backups, Local Backups, P2P Downloads, My Files, and Amazon S3 icons. Click on each icon to see the submenus. D-Link ShareCenter DNS-320 User Manual…

• Page 43: Management

  Section 4 — Configuration Management The Management tab contains the Setup Wizard, Disk Management, Account Management, Network Management, Application Management, System Management, and Status icons. Click on each icon to see the submenus. D-Link ShareCenter DNS-320 User Manual…

• Page 44: Management

  The ShareCenter has a Setup Wizard that allows you to quickly configure some of the basic device settings. Click the Setup Wizard icon to start the Setup Wizard. Step 1 — Click the Run Wizard button to start the setup wizard. Step 2 — Click Next to continue. D-Link ShareCenter DNS-320 User Manual…

• Page 45
  Click Next to continue. Step 4 — Set the time zone from the drop-down menu to the appropriate geographical zone closest to your location. Click Next to continue or click Skip to ignore these settings. D-Link ShareCenter DNS-320 User Manual…
• Page 46
  Step 5 — Select DHCP to obtain IP settings automatically from a DHCP server (router) or Static to assign the parameters below manually. IP Address: Enter an IP address for the DNS-320. Subnet Mask: Enter the subnet mask of your network. Gateway IP Address: Enter the IP address of your gateway (usually the local IP of your router).
• Page 47
  Step 8 — Click the Previous button to go back and check your settings. If you are satisfied with the settings, click the Finish button to save and complete the wizard. Click Exit to end the wizard without saving the settings. D-Link ShareCenter DNS-320 User Manual…

• Page 48: Disk Management

  Note: You can still rebuild a drive using the RAID 1 functionality however you must initiate the rebuild manually. Manual Rebuild Now: If Auto-Rebuild is disabled then you can use the Manual Rebuild option by clicking this button. D-Link ShareCenter DNS-320 User Manual…

• Page 49: Hard Drive Configuration Wizard

  RAID format. The following is an example of a standard volume configuration: The Hard Drive Configuration page displays the current RAID configuration under ‘Current RAID Type’ . Click Set RAID Type and Re-Format. The Setup Wizard begins. D-Link ShareCenter DNS-320 User Manual…

• Page 50
  Section 4 — Configuration The ‘Physical Disk Information’ page displays all of the hard drives on the DNS-320. It shows the array number, vendor, model, serial number, and drive capacity. Click Next to continue. Select the format you want by clicking on the RAID type box (highlight in blue).
• Page 51
  Select Standard to create separate volumes for each individual drive. Click Next to continue. The ‘Volume Configuration Summary’ shows details on all of the configured drives. Check the details on the list and click Format to continue or click Previous to make changes. D-Link ShareCenter DNS-320 User Manual…
• Page 52
  Once the partition is completed, the formatting process will begin. A graphical bar will show the volume being formatted. Do not turn off your NAS during this process. If you would like to change your settings at this stage, click Exit. D-Link ShareCenter DNS-320 User Manual…
• Page 53
  If you would like to change your settings at this stage, click Exit. The system will now update all of the changes made. Please be patient during this process. Do not turn off your NAS during this process. D-Link ShareCenter DNS-320 User Manual…
• Page 54
  The wizard is now complete. It will show the volume number(s), file system selected, the type of RAID, and the disk formation in the RAID. Click Finish to complete the process and start using your DNS-320. D-Link ShareCenter DNS-320 User Manual…

• Page 55: Jbod

  Select JBOD to create a single volume from all of the drives. Click Next to continue. The wizard displays a Volume Configuration Summary of the drive you want to convert to JBOD. Click Format to continue or Previous make changes. D-Link ShareCenter DNS-320 User Manual…

• Page 56
  Section 4 — Configuration A warning message will appear to inform you that all volumes and data will be formatted and erased. Click Yes to continue. Wait for the Wizard to prepare the drive for configuration D-Link ShareCenter DNS-320 User Manual…
• Page 57
  Section 4 — Configuration The Format process begins The System Updates D-Link ShareCenter DNS-320 User Manual…
• Page 58
  The wizard is now complete. It will show the volume name, file system, and Mode. Click Finish to complete the process and start using your DNS-320. The wizard returns you to the main screen. Here you can see the current RAID Type. D-Link ShareCenter DNS-320 User Manual…

• Page 59: Raid 0

  Section 4 — Configuration RAID 0 Select RAID 0 (stripes all of the drives). Click Next to continue. View the Physical Disk Information. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…

• Page 60
  Section 4 — Configuration Select the RAID Type. In this example it’s RAID 0 Click Next to continue. Select the size of your RAID 0 configuration. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 61
  Check the details on the list and click Format to continue or click Previous to make changes. A warning message will appear to inform you that all volumes and data will be formatted and erased. Click Yes to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 62
  Partitioning will now begin. Please be patient while this process takes place. Do not turn off your NAS during this process. The system formats the First Volume. If you would like to change your settings at this stage, click Exit. D-Link ShareCenter DNS-320 User Manual…
• Page 63
  Please be patient during this process. Do not turn off your NAS during this process. The system will now update all of the changes made. Please be patient during this process. Do not turn off your NAS during this process. D-Link ShareCenter DNS-320 User Manual…
• Page 64
  RAID, and the disk formation in the RAID. Click Finish to complete the process and start using your DNS-320. The wizard returns you to main Hardware Configuration page. Under Current RAID Type, you can view your changes. D-Link ShareCenter DNS-320 User Manual…

• Page 65: Raid 1

  Section 4 — Configuration RAID 1 Select RAID 1 to mirror all the hard drives. Click Next to continue. View the Physical Disk Information. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…

• Page 66
  Section 4 — Configuration Select the RAID TYPE you want Click Next to continue. Enter the amount of disk space you would like to assign to the first volume for RAID 1. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 67
  Select Disable Auto-Rebuild if you want to start the rebuild process manually after replacing a failed drive. Click Next to continue. The Volume Configuration Summary shows the Volume Name, Type, File System, and size of the RAID volume. Click Format to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 68
  Partitioning will now begin. Please be patient while this process takes place. Do not turn off your NAS during this process. The system formats the First Volume. If you would like to change your settings at this stage, click Exit. D-Link ShareCenter DNS-320 User Manual…
• Page 69
  Section 4 — Configuration The system updates. Click Next to continue. Setup is complete. Setup provides a Volume Name, File System, and Mode. D-Link ShareCenter DNS-320 User Manual…
• Page 70
  Section 4 — Configuration Once you have completed the wizard. ShareCenter will return to the main screen. The RAID 1 configuration you just set will be displayed. D-Link ShareCenter DNS-320 User Manual…

• Page 71: Upgrade From Standard Mode To Raid 1

  Standard Mode doesn’t offer any redundancy and security of data. It is best then to migrate from Standard Mode to RAID 1. To do this follow these instructions: Step 1 — Insert a second hard drive into the DNS-320. Step 2 — Replace the top and restart the DNS-320.

• Page 72
  Type and Re-Format, the Hard Drive Configuration Wizard only has four procedures. Take a look at the two images below to compare. Click Next to continue. Format the new drive as Standard type. Set RAID Type and Re-Format. D-Link ShareCenter DNS-320 User Manual…
• Page 73
  Reconfigure the drive to RAID 1. Click the checkbox to proceed. Click Next to continue. Step 5 — Under Auto-Rebuild Settings, select whether you want to enable auto rebuild or disable auto rebuild. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 74
  Step 6 — A warning message will appear prompting you to confirm whether you want to format your hard drive. Click Yes to continue or No to exit. Click Next to continue. Step 7 — The software communicates with the hardware to build a list. D-Link ShareCenter DNS-320 User Manual…
• Page 75
  Section 4 — Configuration Step 6 — The Wizard formats the hard drive. Click Next to continue. Step 7 — The System updates. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 76
  Step 8 — Setup is completed when it shows final information on the slot, vendor, model number, and serial number. Click Finish to continue. Step 9 — The wizard returns to the main Hard Drive Configuration D-Link ShareCenter DNS-320 User Manual…

• Page 77: S.m.a.r.t. Test

  A warning message will prompt you to stop all services and network activity. Click Yes to continue the Quick S.M.A.R.T. test. The test will run and a percentage completed will display under the Progress Tab. The Start button will change to a Stop button. D-Link ShareCenter DNS-320 User Manual…

• Page 78
  Section 4 — Configuration When the test is complete, the results will be displayed in the Result column. D-Link ShareCenter DNS-320 User Manual…

• Page 79: Creating A Schedule

  Click Create To view the Schedule List, click on the Schedule List arrow. A new table will appear showing details of the new schedule created. To delete a schedule, click on the Trash Can. D-Link ShareCenter DNS-320 User Manual…

• Page 80: Scan Disk

  Scan Disk provides a method to test the disk’s file system on your ShareCenter. Scan Disk scans your disks file system for errors and/or corruption. Click Management, Disk Management, and then Scan Disk. Select the volume from the drop-down list you wish to scan. Click Scan Disk D-Link ShareCenter DNS-320 User Manual…

• Page 81
  A warning message will prompt you to stop running all services (hard drive and network activity). Click Yes to proceed or No to cancel. The DNS-320 will initialize the volume(s) and begin scanning. Please wait while the software scans the volume(s) or click Exit to cancel the scan.

• Page 82: Account Management

  However access rules can be created and edited in the Network Shares menu. Click Management > Account Management. Click Users/Groups on the left side and then click Create. The User Setup Wizard will appear. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…

• Page 83
  Section 4 — Configuration Step 1 — Select Create a Single User and then click Next to continue. Step 2 — Enter the user name and password for the new user and then click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 84
  Step 3 — Add the user to a group by clicking the Group checkbox. Click Next to continue. Step 4 — Select the network share settings. Select Read Only, Read/Write, or Deny Access. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 85
  • WebDAV is short for Web-based Distribution, Authoring, and Versioning. • Click Next to continue. Select the volumes the user can have WebDAV access to and then select whether to give Read Only or Read/Write rights. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 86
  Click Next to continue. Step 6 — The final step is a summary of all the configurations you made. Click Finish to accept the changes or click Exit to cancel the changes. D-Link ShareCenter DNS-320 User Manual…

• Page 87: Creating Multiple Users

  Enter the amount of users you want to create. Next to the input field is the remaining amount of users you can add to the NAS. Enter a password and confirm it. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…

• Page 88
  Step 3 — Add the user(s) to a group by clicking the Group checkbox. Click Next to continue. Step 4 — Select the network share settings. Select Read Only, Read/Write, or Deny Access. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 89
  Click Next to continue. Step 5 — Enter the amount of disk space you wish to assign the user(s) on each volume. Type 0 to provide unlimited disk space to the user(s). Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 90
  Step 6 — The final step is a summary of all the configurations you made. Click Finish to accept the changes or click Exit to cancel the changes. The User Settings window will show a list of the users created. D-Link ShareCenter DNS-320 User Manual…

• Page 91: Modify Users

  Modify Users Step 1 — Click the user you wish to modify. The user will be highlighted in red. Click Modify to continue. Step 2 — The User Setup Wizard will appear. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…

• Page 92
  Section 4 — Configuration Step 3 — Change the username or password. Click Next to continue. Step 4 — Change the Network Share Settings. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 93
  Click Next to continue. Step 6 — Enter the re-assigned amount of disk space you wish to assign the user on each volume. Type 0 to provide unlimited disk space to the user. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 94
  Click Finish to accept the changes or Exit to cancel the changes. Step 8 — A message will appear stating the user details have been changed successfully. Click Yes to exit the wizard. D-Link ShareCenter DNS-320 User Manual…

• Page 95: Deleting Users

  Step 1 — Click the user you wish to delete. The user will be highlighted in red. Click Delete to continue. Step 2 — A message will appear prompting you to confirm deleting the user. Click Yes to confirm. The user is now removed from the list. D-Link ShareCenter DNS-320 User Manual…

• Page 96: Importing Users

  Section 4 — Configuration Importing Users Step 1 — Click Account Management > Users/Groups > Import Users. Step 2 — The Import Users Wizard will start. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…

• Page 97
  Check the Overwrite Duplicate Accounts box if this is necessary. Click Browse to select the file you want to import. Click Next to continue Step 4 — Assign the privileges and access methods. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 98
  Step 5 — The Summary will show a list of the imported users. If there are problems with the user list, the wizard will show the errors in red on the table. Click Finish to close the wizard or go back to change the imported file. D-Link ShareCenter DNS-320 User Manual…

• Page 99: Creating A Group

  Step 1 — Click Account Management > Users/Groups. Click the blue arrow next to Group Settings and settings window will appear. Click New to create a new Group. Step 2 — The Group Setup Wizard will now start. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…

• Page 100
  Section 4 — Configuration Step 3 — Enter a Group Name. Click Next to continue Step 4 — Click the checkbox to select the user(s) you wish to add to the group and then click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 101
  Click Next to continue. Step 6 — Select the Privileges/Access Methods you want to assign to the group. The greyed out selections are assigned by default. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 102
  Next to continue. Step 8 — Enter the amount of space you want to assign to the group for each volume. Enter zero to give unlimited disk space to the group. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 103
  Step 9 — The wizard is now complete. The last step shows a summary of the group you created. Click Previous to change your settings or Finish to end the wizard. Step 10 — Under Group Settings, a table will display the group you just created. D-Link ShareCenter DNS-320 User Manual…

• Page 104: Modifying A Group

  Click the blue arrow next to Group Settings and the Group Settings table will appear. Step 2 — Select the group you want to modify. Your selection will turn red. Click Modify to change the settings for the Group. D-Link ShareCenter DNS-320 User Manual…

• Page 105
  Section 4 — Configuration Step 3 — The Group Setup Wizard will now start. Click Next to continue. Step 4 — Make the necessary modifications to the group and then click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 106
  Click Next to continue. Step 6 — Select the appropriate privileges you want to assign to the group. The greyed out selections are assigned by default and cannot be modified. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 107
  Enter zero to give unlimited disk space to the group. Click Next to continue. Step 8 — When editing the quota, make sure the size is not smaller than the user quota on his/her account. Click Yes to change the quota. D-Link ShareCenter DNS-320 User Manual…
• Page 108
  Step 9 — The wizard is now complete and will display a summary of the group you edited. Click Previous to change your settings or Finish to end the wizard. Exit will cancel all changes you made. D-Link ShareCenter DNS-320 User Manual…

• Page 109: Deleting A Group

  Step 1 — Select the Group you want to delete and click Delete. Step 2 — A warning message will appear asking you to verify if you want to delete the Group. Click Yes to delete the Group or No to cancel your decision. D-Link ShareCenter DNS-320 User Manual…

• Page 110: Quotas

  Click Enable to activate Quota Settings. The status will now display ‘Started’ notifying you that the Quota Settings are enabled. To Modify a User’s Quota Settings, click the blue arrow next to User Quota Settings to reveal a table of users. D-Link ShareCenter DNS-320 User Manual…

• Page 111
  Click Modify to change the user’s settings. The Quota Settings configuration box will display the user account you want to modify. Enter a new quota amount for each volume. Click Apply to confirm your settings. D-Link ShareCenter DNS-320 User Manual…
• Page 112
  Section 4 — Configuration The modified quota settings will be displayed in the table. For Group Quota Settings, click the blue drop-down arrow next to Group Quota Settings to view the group quota table. D-Link ShareCenter DNS-320 User Manual…
• Page 113
  Select the group you want to modify. Your selection will turn red. Click Modify. The Group Quota Settings screen will display the group you want to modify. Enter a new quota amount for each volume for the current group and click Apply. D-Link ShareCenter DNS-320 User Manual…
• Page 114
  Section 4 — Configuration The modified quota settings will be displayed in the table. D-Link ShareCenter DNS-320 User Manual…

• Page 115: Network Shares

  At the bottom of the table, the user can navigate through pages and also refresh the window by click on the Refresh button. Click on the Reset Network Shares button to reset the network access list to the default configuration. D-Link ShareCenter DNS-320 User Manual…

• Page 116: Add/Modify Network Shares Wizard

  2) Configure shared folder access rights. 3) Configure network access settings. 4) View a summary of the configuration before completing. Click Next to continue. Step 2 — Select the Share Folder from one of the volumes. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…

• Page 117
  Step 4 — Select the appropriate access rights for the share. Options to select from are Read Only, Read/Write, and Deny Access. This procedure can also be used to block certain users from accessing certain folders. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 118
  Click Next to continue. Step 6 — If you selected Specific user/Group in Step 3, then this step allows you to set the access rights for each Group configured on the ShareCenter. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 119
  No (off) when using file-based database applications. When enabled, the file attribute “Map Archive” will be copied as the file is being stored on the ShareCenter. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 120
  • AFP is short for Apple Filing Protocol. • FTP is short for File Transfer Protocol • NFS is short for Network File System. • WebDAV is short for Web-based Distributed Authoring and Versioning. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 121
  • Root Squash — Disables writing to the Root owned directories and files on the system when the user has root access privileges. • Write — provide write permission to the file system. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 122
  If you checked WebDAV as an access method, then this step will allow you to set the access parameters. Click Next to continue. Step 10 — Here a summary of the created shares will be displayed. Click Finish to save your settings. D-Link ShareCenter DNS-320 User Manual…

• Page 123: Deleting A Network Share

  Select the Network Share you wish to delete. Your selection will turn red. Click Delete to remove the share. A warning message will appear prompting you to verify if you wish to delete the Share. Click Yes to delete or No to Cancel. D-Link ShareCenter DNS-320 User Manual…

• Page 124
  Section 4 — Configuration The deleted Share will be removed from the Network Share List. D-Link ShareCenter DNS-320 User Manual…

• Page 125: Resetting The Network Shares

  Section 4 — Configuration Resetting the Network Shares Click the Reset Network Shares button. A warning message will prompt you to confirm your selection. Click Yes to confirm or No to cancel. D-Link ShareCenter DNS-320 User Manual…

• Page 126: Iso Shares Setup Wizard

  The following section will describe how to add a new ISO mount on the ShareCenter. To add an ISO Mount, click on the New button. An easy to configure wizard will launch. Click Next to continue. Select the ISO file to mount. Check the box to the left of the .iso file to select it and click Next to continue. D-Link ShareCenter DNS-320 User Manual…

• Page 127
  Click Next to continue. You can assign Read Only or Deny Access privileges to the ISO Mount share here. Click on the appropriate radio button for the privileges you would like to assign. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 128
  • AFP is short for Apple Filing Protocol. • FTP is short for File Transfer Protocol • NFS is short for Network File System. • WebDAV is short for Web-based Distributed Authoring and Versioning. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 129
  A summary of the share will be displayed. Click on the Finish button to accept the change and complete the wizard. Through the D-Link Storage Utility, the ISO Mount Share can now be mapped to your computer as a normal network share. D-Link ShareCenter DNS-320 User Manual…

• Page 130: Creating An Iso Image

  The following section will describe how to create an ISO image from your NAS, export the data out to your PC. Click Account Management > Network Shares > ISO Mount Share Settings. Click on the Create ISO Image button at the bottom. D-Link ShareCenter DNS-320 User Manual…

• Page 131: Iso Image Creation Wizard

  Section 4 — Configuration ISO image Creation Wizard The ISO image wizard helps you create an ISO image on your ShareCenter. Read the instructions for the ISO Image Creation Wizard and then click Next to continue. D-Link ShareCenter DNS-320 User Manual…

• Page 132: Iso Name And File Path Settings

  — DVD5 (4.7GB) — This creates an ISO file 4.7GB in size ready for burning onto a single-layer DVD at a later stage. — DVD9 (8.5GB) — This creates an ISO file 8.5GB in size ready for burning onto a double-layer DVD at a later stage. D-Link ShareCenter DNS-320 User Manual…

• Page 133
  Section 4 — Configuration Select the Image Path. Click the Browse button to select the destination folder on your NAS. Click the Volume to save it there or click New to create a new directory. D-Link ShareCenter DNS-320 User Manual…
• Page 134
  Section 4 — Configuration Enter a name that resembles the ISO file you are writing. Click Next. A warning message appears asking you to confirm your decision. Click Yes to continue or click No to cancel. D-Link ShareCenter DNS-320 User Manual…

• Page 135: Iso Tree Editing

  At the bottom of the window it shows the path where the ISO file will be saved. Click Next to continue. The wizard will create the ISO image. Click the Auto Mount checkbox if you want the ISO file to be mounted automatically. Click Finish to close the wizard. D-Link ShareCenter DNS-320 User Manual…

• Page 136: Verifying The Iso Image

  Section 4 — Configuration Verifying the ISO image Open your Windows Explorer, click the Network icon, double-click your ShareCenter NAS. Double-click the volume you saved the ISO. Your ISO image should be there. D-Link ShareCenter DNS-320 User Manual…

• Page 137: Admin Password

  Password settings. 1. Enter a new Username 2. Type the original Password 3. Enter a New Password 4. Confirm the New Password Click Save Settings to accept the changes or Don’t Save Settings to cancel changes. D-Link ShareCenter DNS-320 User Manual…

• Page 138: Network Management

  LAN throughput. It also enables redundancy. If one of the ports fails, the other acts as backup. The network load is balanced across all links. Go to Network Management and then LAN Setup. Click Setup. D-Link ShareCenter DNS-320 User Manual…

• Page 139
  This step allows you to configure your LAN settings. Here you can choose between DHCP Client or Static IP. If you select Static IP, you will need to manually configure your own IP settings. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 140
  Section 4 — Configuration A summary of what you just configured will be displayed. Click Finish to exit the wizard. D-Link ShareCenter DNS-320 User Manual…

• Page 141: Ipv6 Settings

  Section 4 — Configuration IPv6 Settings Go to Management > Network Management > LAN Setup > IPv6 Settings and click the Setup button. An IPv6 setup window will appear. D-Link ShareCenter DNS-320 User Manual…

• Page 142: Ipv6 Setup

  Auto — Requests information specifically from an IPv6-enabled router and automatically configure your settings. DHCP — Requests information from a DHCP server. Static — Enter your own IP configuration Off — Do not use IPv6 D-Link ShareCenter DNS-320 User Manual…

• Page 143
  64; no more, no less. Enter the Default Gateway, and DNS settings. Click Apply when complete. The IPv6 Settings table will now display the settings in table format. In order for the changes to take effect, you are prompted to re-login. Click OK and log in. D-Link ShareCenter DNS-320 User Manual…

• Page 144: Link Speed And Lltd Settings

  Settings button to save the new settings. LLTD: The device supports LLTD (Link Layer Topology Discovery) and is used by the Network Map application that is included in Windows Vista® and Windows® 7. Select to enable or disable LLTD. D-Link ShareCenter DNS-320 User Manual…

• Page 145: Ddns

  When the user clicks on the “Sign up for D-Link’s Free DDNS service at www.DLinkDDNS.com link, the user will be re-directed to the D-Link DDNS page. Here the user can create or modify a D-Link DDNS account to use in this configuration. D-Link ShareCenter DNS-320 User Manual…

• Page 146: Port Forwarding

  Section 4 — Configuration Port Forwarding The DNS-320 supports UPnP port forwarding which configures port forwarding automatically on your UPnP-enabled router. Note: You will need a UPnP router on your network. Log in and click Network Management > Port Forwarding.

• Page 147
  A message will notify you that the wizard has found a UPnP router on the network. Note that you have to enable UPnP on your router. Click the blue arrow next to port forwarding to reveal the Port Forwarding options. D-Link ShareCenter DNS-320 User Manual…
• Page 148
  Section 4 — Configuration Click Add. The Port Forwarding wizard will start. Click Next to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 149
  Internet via your UPnP-enabled router. Note: You can select more than one port. Click Previous to change the Port Forward Rule or Finish to configure the port forwarding on the UPnP router automatically. D-Link ShareCenter DNS-320 User Manual…

• Page 150: Application Management

  FTP server The Application Management section allows you to configure many services for your DNS-320. The server and service settings include: FTP server, UPnP AV server, iTunes server, AFP, and NFS services. Let’s begin by looking at configuration options for the FTP server.

• Page 151
  Select IPv4 or IPv6 and then enter the IP address of a machine you wish to block. Select Permanent if you wish to block the IP address permanently or Temporary if you wish to set a time frame. If you selected permanent, click Apply and continue. D-Link ShareCenter DNS-320 User Manual…
• Page 152
  Section 4 — Configuration If you selected Temporary, then select a time frame and click Apply to continue. The Blocked IP list will display the IP addresses you blocked. D-Link ShareCenter DNS-320 User Manual…
• Page 153
  Section 4 — Configuration Click the blue arrow next to FTP server status to reveal the FTP details. The FTP server is stopped by default. Click Start FTP Server to run the process. D-Link ShareCenter DNS-320 User Manual…

• Page 154: Upnp Av Server

  Click Application Management, then UPnP AV Server. Click the Enable radio button to enable the UPnP AV server. Click Add to configure the UPnP AV share. Select the volume you like to share and click Apply. D-Link ShareCenter DNS-320 User Manual…

• Page 155
  Section 4 — Configuration The NAS is building the media library. When the system has finished building the media library, a success message will appear. Click Yes to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 156
  Section 4 — Configuration The selected volume will appear in the table under the UPnP AV server. D-Link ShareCenter DNS-320 User Manual…

• Page 157: Itunes Server

  Server The DNS-320 features an iTunes Server. This server provides the ability to share music and videos to computers on the local network running iTunes. If the server is enabled, the device will be automatically detected by the iTunes program and the music and videos contained in the specified directory will be available to stream over the network.

• Page 158: Afp Service

  The ShareCenter supports Network File System (NFS) service. To enable this multi-platform file system on your ShareCenter enable it here. Otherwise disable the option to prevent unnecessary CPU overhead. Click Application Management > NFS Service. Click the Enable radio button to turn NFS service on. Click Save Settings. D-Link ShareCenter DNS-320 User Manual…

• Page 159: System Management

  Language The language packs help users customize the DNS-320 to their specific region. Download your language pack from the D-Link website or the CD and follow the instructions below. When you disable the language pack, the GUI will return to English.

• Page 160: Time And Date

  Select your time zone from the drop-down menu. Click Save Settings. You can also select a NTP server from the drop-down menu to sync the time and date with an online server. Then click Save Settings. D-Link ShareCenter DNS-320 User Manual…

• Page 161: Device

  Enter your device name here. This name is what the device will appear as on the network. By default, the device name is dlink-xxxxxx, where xxxxxx is the last six digits of the MAC address. Description: Assign a device description to the device. D-Link ShareCenter DNS-320 User Manual…

• Page 162: System Settings

  Section 4 — Configuration System Settings System Settings provides features to control your DNS-320. Users can restart the NAS, restore the system to it’s original state, set idle times, shutdown the system, configure settings, and configure system temperature settings. Restart: Click to reboot the DNS-320.

• Page 163: Power Management

  Set the amount of idle time before the drives go into Drives: hibernation. Click Enable or Disable. The Power Recovery Power Recover: feature will automatically restart your device from a previously unexpected shutdown due to a power failure. D-Link ShareCenter DNS-320 User Manual…

• Page 164
  Click Enable to turn on this function. Power Off Scheduling: Enable or disable the power off days using the check box and configure the time for each day that the power off will occur. D-Link ShareCenter DNS-320 User Manual…

• Page 165: Notifications

  Select STARTTLS or SSL from the drop-down menu if it is Connection: required by your SMTP server, or select NONE. Click the Test E-Mail button to send a test alert and confirm Test E-Mail: your settings are correct. D-Link ShareCenter DNS-320 User Manual…

• Page 166: Sms Settings

  Mobile Service Provider. Test SMS button: Click this button to send a test message to your mobile phone to verify the settings are correct and the API URL is functioning with your provider. D-Link ShareCenter DNS-320 User Manual…

• Page 167: Adding An Sms Service Provider

  URL. Enter your SMS Provider name here. Enter the HTTP API URL provided to you. Choose the appropriate type parameter in the drop-down menu for the parsed parameters of the URL on the left. D-Link ShareCenter DNS-320 User Manual…

• Page 168: Event Settings

  You can limit which events are sent as alerts to the Email or SMS settings by checking the events here. Event Settings: Select the information you want e-mailed to the above address or sent over SMS messages to the above mobile number. The items checked will be sent when necessary. D-Link ShareCenter DNS-320 User Manual…

• Page 169: Logs

  Clear Log: Click Clear Log to delete all the existing logs. Backup Log: Click Backup Log to save the existing logs to a text file on your computer. D-Link ShareCenter DNS-320 User Manual…

• Page 170: Firmware Upgrade

  The Firmware Upgrade Page makes it simple to check for and upload new firmware releases to the device. This section provides a link to check for new firmware on the D-Link support website. If new firmware is available, download the file to your local computer.

• Page 171: Usb Devices

  IP address(es) of the network UPS slaves to notify them in the event of a power failure. For more details, refer to the UPS Connectivity section. USB Storage Information Click the blue arrow to reveal the USB storage Information. It displays information on the manufacturer, product name, and size (capacity). Click the Unmount button to eject the USB device. D-Link ShareCenter DNS-320 User Manual…

• Page 172: Printer Information

  Section 4 — Configuration Printer Information Click the blue arrow to reveal Printer Information. It displays information on the manufacturer, product type, and connection details. Click Clear Print Queue(s) to remove all active print jobs. D-Link ShareCenter DNS-320 User Manual…

• Page 173: System Status

  System Info The System Status information screen provides information on the DNS-320. System Info provides information on the LAN ports, Device Information, and Volume information. Hard Drive Info displays information on all hard drives including the manufacture details, temperatures, size, and status.

• Page 174
  Section 4 — Configuration Click System Status > Resource Monitor, then click the blue arrow to reveal the resource details. It provides information on the CPU, memory, bandwidth, and processes in action. D-Link ShareCenter DNS-320 User Manual…

• Page 175: Home

  The Home tab is the center for all files on your ShareCenter. Home is divided into one main subfolder called My Folder. Under My Folder resides My Files. Let’s take a closer look at this utility independently. D-Link ShareCenter DNS-320 User Manual…

• Page 176: My Files

  NAS. Click My Files. The My Files window provides a list of all volumes created on the NAS. Click on any Volume you created to see a directory listing of the files. D-Link ShareCenter DNS-320 User Manual…

• Page 177: Upload

  To upload more files to the volume you have selected, click the Upload button. Click the Select Files button to find files on your computer to upload to the NAS. Locate the path of the file you want to upload and click Open. D-Link ShareCenter DNS-320 User Manual…

• Page 178
  Section 4 — Configuration Click Upload to start the uploading process. Then click Exit to close the upload window. The file updates to the NAS and is displayed on the directory table. D-Link ShareCenter DNS-320 User Manual…

• Page 179: Download

  To download files from the NAS to your computer, select the file you want to download and click the Download button. Depending on your browser download settings, the browser automatically downloads the file to your saved location. D-Link ShareCenter DNS-320 User Manual…

• Page 180: My Favorites Application

  My Favorites Application The My Favorites Application section allows users to add applications to the Home section so users can easily access these applications. Follow these easy steps to setup Favorite Applications on the Home screen. D-Link ShareCenter DNS-320 User Manual…

• Page 181: Adding Applications

  Click the Add/Remove button to add Applications. Click the checkbox under each application you wish to add to the Home screen. Click Apply to continue. The shortcut is now created on the Home screen. Click the shortcut to access the application. D-Link ShareCenter DNS-320 User Manual…

• Page 182: Applications

  Click on Test to verify access to the site address and file/folder. If you selected File from the above drop- down list, you must specify the exact file in the URL path, including the file extension. (e.g. http://example.com/test/ testfile.txt). D-Link ShareCenter DNS-320 User Manual…

• Page 183
  In addition, there is an option to delete a download event at any time. Current download statistics, such as % completed and download speed, are displayed for each event. A refresh button is also provided to produce updated listings at any time. D-Link ShareCenter DNS-320 User Manual…

• Page 184: Remote Backups

  Backup list. You must select the remote backup job first and then click the Modify button. Delete: To remove a Remote Backup job select the job in the list and then click the Delete button. D-Link ShareCenter DNS-320 User Manual…

• Page 185: Create Wizard

  NAS or Linux file system. Remote To Local: sets the backup source as the remote NAS or Linux file system and the target destination for the backup files as the local NAS. D-Link ShareCenter DNS-320 User Manual…

• Page 186
  The subsequent backups in the incremental series contain new files and folders plus the links to the first incremental backup. D-Link ShareCenter DNS-320 User Manual…
• Page 187
  Once — Select this option to run the Remote Backup once at a specific date and time set here. Scheduled: Select this option to set the backup to occur daily, weekly, monthly per a specific schedule. D-Link ShareCenter DNS-320 User Manual…
• Page 188
  Navigation buttons: Use these buttons to move up and down in the list when there are multiple jobs configured. Refresh Button: Click this button during a backup or recovery process to monitor the progress by updating the progress completed bar. D-Link ShareCenter DNS-320 User Manual…

• Page 189: Local Backups

  ShareCenter compare identical file names at the source Save To: Enter a valid destination drive on the ShareCenter, or and destination. Files will only be overwritten if the click Browse to select the destination. source file is more recent. D-Link ShareCenter DNS-320 User Manual…

• Page 190: Time Machine

  Adds a NAS folder as a Time Machine destination. Delete: Deletes a NAS folder setup as a Time Machine destination. Remove all Delete all the NAS folders in the list configured as Network Time Machine Destinations. Shares: D-Link ShareCenter DNS-320 User Manual…

• Page 191: Usb Backups

  USB Backups This section allows the user to configure the ShareCenter so that it becomes a backup destination for a USB device that is connected to your DNS-320. MTP Backups (Media Transfer Protocol) basically backup digital media content from a MTP compatible USB device such as digital cameras, MP3 players, and smartphones to your ShareCenter.

• Page 192: Mtp Backups

  Type: folder. Select Synchronize to overwrite all the files in the existing USB folder named USBDisk1_1. Status: Displays the current USB backup status. Click on the Save Settings button to save the USB Backups settings. D-Link ShareCenter DNS-320 User Manual…

• Page 193: Mtp Backup Process

  MTP Backup Process 1. Connect a MTP USB device to the USB port on the back panel of the device. The DNS-320 will enter backup mode if MTP Backups has been enabled in the MTP backup settings. 2. Press the USB button to start the backup process. The blue USB LED flashes briefly to display that the backup is in the process.

• Page 194
  3. Go to System Management, USB Devices. Under USB Storage Information, you will see detailed information on the device you plugged into the DNS-320. You can connect an Android device but enable USB debugging. 4. When the backup is complete, the flashing blue LED will become solid blue.

• Page 195: Usb Backup Process

  The ShareCenter will copy or sync all the files from the source folder to the destination folder. Please Note: No warning message will appear to indicate that all data on the destination folder will be deleted automatically. D-Link ShareCenter DNS-320 User Manual…

• Page 196
  3. When the backup is complete, the flashing blue LED will become solid blue. To unmount the USB storage device, you can click and hold the USB button at the front of the DNS-320 or you can go to the USB Devices menu of the System Management icon in the Management Tab of the Web GUI of the device.

• Page 197: P2P Downloads

  Here the user can choose to enable or disable the encryption. Bandwidth You can manually configure the maximum download Control: rate and maximum upload rate. Enter the value -1 to set the respective field to unlimited. D-Link ShareCenter DNS-320 User Manual…

• Page 198: Downloads

  The Refresh button allows the user to refresh a selected download. This will remove not the P2P task list so it displays the most updated only the torrent file, but also the partially statistics. downloaded files too. D-Link ShareCenter DNS-320 User Manual…

• Page 199: My Files

  Moves the file to a new folder on the disk. Delete: Removes the selected file from disk. Rename: Allows you to configure a new file name for the selected file. Properties: Displays the file properties such as ownership, access rights, and modify time. D-Link ShareCenter DNS-320 User Manual…

• Page 200: Amazon S3

  With Amazon S3 support, it is possible to upload the data from your DNS-320 to Amazon S3 or download the data from Amazon S3 to your DNS-320.

• Page 201: Creating An Aws Account

  1. Access Key ID 2. Secret Access Key Save these keys in a secure location as your ShareCenter will need them to create the backup and recovery jobs to and from the Amazon S3 Cloud Storage. D-Link ShareCenter DNS-320 User Manual…

• Page 202
  You will need the following configuration data to create a backup/restore job: Step 1: Job Name Settings Enter a 16 character name to identify the name of the backup or the restore job. D-Link ShareCenter DNS-320 User Manual…
• Page 203
  Region: Select your Region from the drop-down menu. Step 3: Server Type Type: Select Upload or Download from the drop-down menu. Backup Type: Use the drop-down menu and select Overwrite Existing Files, Full Backup or Incremental Backup. D-Link ShareCenter DNS-320 User Manual…
• Page 204
  Select the Schedule Mode for the job to be executed. You may select Manual (now or later from the job list), Once (at a predetermined time and day), or Scheduled (a predetermined time on a daily basis). D-Link ShareCenter DNS-320 User Manual…
• Page 205
  This field of the jobs controls whether the job will execute or not. If the button shows a green triangle, clicking it enables the job to function. If the button shows the red square, clicking it disables the job from executing. D-Link ShareCenter DNS-320 User Manual…

• Page 206: Knowledge Base

  RAID, short for Redundant Array of Independent Disks, is a combination of two or more disks with the aim of providing fault tolerance and performance improvement. There are several different levels of RAID, with each one providing a different method of sharing or distributing data amongst the drives. The DNS-320 supports Standard, JBOD, RAID 0, and RAID 1. JBOD…

• Page 207
  Because the data is stored on multiple disks, fault tolerance means that if one drive fails, all RAID 1 provides fault tolerance and protection, in data in the array will be lost. addition to performance advantages. D-Link ShareCenter DNS-320 User Manual…

• Page 208: Raid Options

  Section 5 — Knowledge Base RAID Options Here is a list of the RAID options available on the ShareCenter DNS-320 Standard RAID — creates a single volume for one drive or more drives. JBOD — allows you to create a large virtual disk drive by concatenating two or more smaller drives together.

• Page 209
  This ensures that your data is protected against loss if any hard drive in the RAID 1 set fails. In fact, as long as any single member of the set remains functional, you will continue to operate normally, with complete access to your data. D-Link ShareCenter DNS-320 User Manual…

• Page 210: Ups Connectivity

  UPS Connectivity The DNS-320 supports USB UPS, giving users the ability to share the UPS on their local network and protect from an abnormal shutdown due to a power failure. Connect a UPS to the USB port on the back of the ShareCenter®.

• Page 211
  Click the blue arrow next to UPS Settings. There are two modes — Standalone and Master. Select Standalone to use the UPS only on the DNS-320 or select Master to share the UPS with the network UPS slaves. The UPS Status screen shows the mode, manufacturer, product type, battery charge meter, and status.
• Page 212
  Enter the IP address of the other UPS slave on the network. Click the + button to add more IP addresses. Make sure the DNS-320 and the UPS slaves are on the same physical network. D-Link ShareCenter DNS-320 User Manual…
• Page 213
  Once you have entered an IP address, the system will check its database for IP address records. The UPS Settings table will display the IP address(es) you added. Your DNS-320 is now setup as the network master to notify the network slaves about critical power status. D-Link ShareCenter DNS-320 User Manual…

• Page 214: Deleting A Ups Slave

  Section 5 — Knowledge Base Deleting a UPS Slave Under Management > System Management > USB Devices > UPS Setting, select the IP address. Your selection will turn red. Click Delete. The DNS-320 will process your request. D-Link ShareCenter DNS-320 User Manual…

• Page 215
  Section 5 — Knowledge Base The IP address will no longer be listed in the table. D-Link ShareCenter DNS-320 User Manual…

• Page 216: Usb Print Server

  Note: The print function is supported in Microsoft Windows OS only. The device does not support the copy and scan functions of Multi-Function Printers either. To add a printer, connect your printer via USB cable to the USB port of your device: The printer should appear in the USB Devices menu of the System Management icon. D-Link ShareCenter DNS-320 User Manual…

• Page 217
  The Windows Add Printer Wizard will launch: ® Select the printer driver from the installed Manufacturer list or use the Have Disk button to browse for the printer driver file. Click OK to continue. D-Link ShareCenter DNS-320 User Manual…
• Page 218
  Section 5 — Knowledge Base Once you have selected the proper driver as shown in the browse list then click OK to install the printer. The printer is now installed and the printer queue will appear. D-Link ShareCenter DNS-320 User Manual…

• Page 219: Warranty

  Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.

• Page 220
  Software or to refund the portion of the actual purchase price paid that is attributable to the Software. Except as otherwise agreed by D-Link in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by D-Link for the Software.
• Page 221
  • USA residents send to 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link.

• Page 222: Governing Law

  FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NONCONFORMING PRODUCT.

• Page 223
  (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office. D-Link ShareCenter DNS-320 User Manual…

SHARECENTER

TM

PULSE 2-BAY NETWORK

STORAGE
DNS-320

QUICK
INSTALLATION
GUIDE

Руководство по быстРой установке

В случае если инструкция на русском не полная или нужна дополнительная информация по этому устройству, если вам нужны
дополнительные файлы: драйвера, дополнительное руководство пользователя (производители зачастую для каждого
продукта делают несколько различных документов технической помощи и руководств), свежая версия прошивки, то
вы можете задать вопрос администраторам или всем пользователям сайта, все постараются оперативно отреагировать
на ваш запрос и как можно быстрее помочь. Ваше устройство имеет характеристики:Линейка: DNS-320, Назначение: сетевой накопитель (NAS), Количество мест под HDD: 2, Форм-фактор мест под HDD: 3.5″, Внутренний интерфейс HDD: SATA 1.5Gb/s, Поддержка файловых систем на внутренних дисках: EXT3, полные характеристики смотрите в следующей вкладке.

Для многих товаров, для работы с D-link DNS-320 могут понадобиться различные дополнительные файлы: драйвера, патчи, обновления, программы установки. Вы можете скачать онлайн эти файлы для конкретнй модели D-link DNS-320 или добавить свои для бесплатного скачивания другим посетителями.

Если вы не нашли файлов и документов для этой модели то можете посмотреть интсрукции для похожих товаров и моделей, так как они зачастую отличаются небольшим изменениями и взаимодополняемы.

Обязательно напишите несколько слов о преобретенном вами товаре, чтобы каждый мог ознакомиться с вашим отзывом или вопросом. Проявляйте активность что как можно бльше людей смогли узнать мнение настоящих людей которые уже пользовались D-link DNS-320.