E survey e300 pro инструкция

User Guide for e-survey models including: E300 Pro, GNSS Receiver, E300 Pro GNSS Receiver

E300 Pro GNSS Receiver User Guide-V2.2-ENG

王雀

2021-09-14 — Configure NMEA data output through Bluetooth or 5-pin port. • Select whether to enable automatic output GNSS PPP message. • Select whether to enable external …

• PDF Viewer
• Universal Document Viewer
• Google Docs View
• Google Drive View
• Download Document [pdf]
• Download Document [Optimized]
• Document:
  • Text
  • References

Not Your Device? Search For Manuals / Datasheets:

File Info : application/pdf, 34 Pages, 4.44MB

DocumentE300 Pro GNSS Receiver User Guide-V2.2-ENG

E300 Pro GNSS RECEIVER
USER GUIDE

1st Edition Shanghai eSurvey GNSS Co., Ltd.

V2.2

SHANGHAI ESURVEY GNSS CO., LTD.
Copyright © Shanghai eSurvey GNSS Co., Ltd. 2021. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Shanghai eSurvey GNSS Co., Ltd. Trademarks and Permissions
and other eSurvey trademarks are trademarks of Shanghai eSurvey GNSS Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between eSurvey and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied. Certificate
The device complies with part 15 of the FCC rules. Operation is subject to the following conditions:
 This device may not cause harmful interference.  This device must accept any interference received, including interference that may
cause undesired operation. Contains FCC IDs: 2ABNA-2455A, 2ABNA-TRM121, XMR201903EG25G Contains IC IDs: 11648A-2455A, 11648A-TRM121, 10224A-201903EG25G
This product has been tested and found to comply with European Council Directive 2014/53/EU, thereby satisfying the requirements for CE Marking and sale within the European Economic Area (EEA). Contains a radio module. These requirements are designed to provide reasonable protection against harmful interference when the device is operated in a residential or commercial environment.

SHANGHAI ESURVEY GNSS CO., LTD.

SHANGHAI ESURVEY GNSS CO., LTD.
Contents
1 Before You Start .........................................................................................................1 1.1 Precautions for Safe Operation..........................................................................1 1.1.1 Warning ..........................................................................................................1 1.1.2 Caution ...........................................................................................................1 1.2 Exemptions from Responsibility........................................................................2
2 E300 at a Glance .........................................................................................................3 2.1 Appearance ..........................................................................................................3 2.2 Indicator Light......................................................................................................3 2.3 Battery Indicator ..................................................................................................4 2.4 Power Button .......................................................................................................4 2.5 5-pin Port..............................................................................................................4
3 Web UI .........................................................................................................................5 3.1 Position ................................................................................................................6 3.2 Datalink ................................................................................................................7 3.3 Satellites...............................................................................................................8 3.4 Information...........................................................................................................9 3.5 Working Mode....................................................................................................10 3.6 Satellite Settings................................................................................................11 3.7 Device Configuration ........................................................................................12 3.8 NMEA Message..................................................................................................13 3.9 View Logs...........................................................................................................14 3.10 Raw Data ............................................................................................................15 3.11 Backup Data.......................................................................................................16 3.12 Management.......................................................................................................17
4 Basic Operations ......................................................................................................18 4.1 Insert a SIM Card ...............................................................................................18 4.2 Charge the Battery ............................................................................................18 4.3 Connect to the External Power.........................................................................18 4.4 Install the Radio Antenna..................................................................................18 4.5 Measure Antenna Height...................................................................................19 4.6 Start Tilt Measurement ......................................................................................20 4.6.1 Start E-bubble Tilt Measurement..................................................................20 4.6.2 Start IMU Tilt Measurement..........................................................................23
5 Internal Radio............................................................................................................24 6 Standard Accessories ..............................................................................................25
I

SHANGHAI ESURVEY GNSS CO., LTD.
II

SHANGHAI ESURVEY GNSS CO., LTD.
1 Before You Start
Dear customers, Thank you for purchasing our device. Before you start, please carefully read the following:
 This user guide is for your device only. If the actual situation does not match with the situation in the user guide, the actual situation shall prevail.
 For safety and instructions on how to use this device, please carefully read the precautions, exemptions from responsibility and instructions in the user guide.
 The information in this user guide is subject to change without notice. We reserve the right to change or improve the device as well the content in the user guide without any obligation to notify you. For any questions, please contact us.
1.1 Precautions for Safe Operation
For the safety of your product and prevention of injury to operators and other persons as well as prevention of property damage, please read this part carefully before using your product. Precautions can be divided into the following types according to the degree of loss or injury in case of negligence or omission:



WARNING: Precautions requiring special attention. Ignoring this indication

may possibly result in death or serious injury to the operator.



CAUTION: Precautions mainly for informing, such as supplementary

instructions and using limitations. Ignoring this indication may possibly result in

personal injury or property damage.

1.1.1 Warning

 Please do not disassemble the device. Otherwise, fire or electric shock may occur. Only e-Survey authorized distributors can disassemble or rebuild the device.
 Please do not cover the charger when charging. Otherwise, fire may occur.  Please do not use wet charger, defective power cable, socket or plug, and power
cable not specified by e-Survey. Otherwise, fire or electric shock may occur.  Please do not put the device close to burning gas or liquid, and do not put it in the
fire or high temperature condition. Otherwise explosion may occur.  Please avoid short circuit of the battery. Otherwise, fire may occur.  Please avoid disturbance of severe electrostatic discharge. Otherwise, the device
may have some degradation of performance like switching on/off automatically, etc.

1.1.2 Caution

 Please put the device firmly on the pole.  To avoid accidental damage, please only use original supplied parts. Otherwise,
damage to the device may occur.  When transporting, please try your best to lighten libration on the device.  Please do not touch the device with wet hand. Otherwise, electric shock may occur.  Please do not arbitrarily stand or seat on the carrying case, or turn over it.
Otherwise, the device may be damaged.

1

SHANGHAI ESURVEY GNSS CO., LTD.
1.2 Exemptions from Responsibility You are expected to follow all operating instructions and regularly check the performance of this device. We assume no responsibility for any damage and loss of profits caused by the following conditions:
 A faulty or intentional usage or misuse.  Any disasters, such as earthquakes, storms, floods etc.  A change of data, loss of data, an interruption of business etc.  Wrong transport.  Use of non-original parts.  Usage not explained in the user guide.
2

SHANGHAI ESURVEY GNSS CO., LTD.
2 E300 at a Glance
The E300 Pro main body is designed with magnesium alloy material to provide durable usage and better heat dispersion and light weight 940g. And when it's fully charged, it can continuously work for 12h. 2.1 Appearance The E300 Pro main body is as follows:

2.2 Indicator Light

Through the color of the indicator light, you can know the following:



Battery status

o Green: battery level 30% - 100%.

o Flashing green: battery level 10% - 30% (speaker will beep).

o Flashing red: battery level below 10%.



Bluetooth status

o Off: Bluetooth not connected.

o Blue: Bluetooth connected.



Datalink status

o Green: datalink is ready to start.

o Flashing green: datalink is transmitting data normally.

o Flashing blue: light flashes according to the interval with raw data recording

enabled.



Satellite status

o Off: no receiving satellites.

o Green: fixed solution.

o Flashing red: receiving satellites without no solution status.

o Flashing green: have solution but not fixed.

o Flashing red and green alternately: the mainboard abnormal.

3

SHANGHAI ESURVEY GNSS CO., LTD.

2.3 Battery Indicator

Through the battery indicator, you can know the battery level:

Number of green indicator

Battery level

4

75% - 100%

3

50% - 75%

2

25% - 50%

1

0% - 25%

2.4 Power Button
Through the power button, you can achieve the following:
 Power on the receiver: long press the button for 3 seconds and release it. All indicator lights will be on.
 Power off the receiver: long press the button for 3 seconds, release it until you hear the voice Power off?, and press the button again.
 Broadcast the current mode: press the button after powering on. The receiver will broadcast the current working mode, including rover, base or static.
 Self-check: to troubleshoot the receiver when the receiver cannot work normally, long press the button for 2 seconds, release it until you hear the voice Power off?, and long press the button for 3 seconds until you hear the voice Self-check.
 Check the battery level: press the button. The battery indicator shows the battery level.
2.5 5-pin Port
Through 5-pin port, you can connect an external radio and external power, or output NMEA messages.
Definition of this port is as follows:

4

SHANGHAI ESURVEY GNSS CO., LTD.
3 Web UI
The receiver WIFI can be used as a hotspot, and you can connect to the hotspot with you PC, smart phone or tablet. After connecting to the hotspot, you can manage working status, change working mode, configure basic settings, download raw data, update firmware and register device, etc. Taking the interface of your PC as an example, to enter the Web UI, do the following:
1. Find the receiver WIFI hotspot with your computer. Hotspot name: the device serial number
2. Open the web browser, and input IP address 192.168.10.1. The following interface shows:
3. Enter the password. Default: password
5

SHANGHAI ESURVEY GNSS CO., LTD.
3.1 Position In Position page, you can view the following, and start and stop recording in static mode:
 System node  Coordinates: longitude, latitude, and height  Solution status  Satellite number  PDOP  HDOP  TDOP  HRMS  VRMS  Local time  UTC time
6

SHANGHAI ESURVEY GNSS CO., LTD.
3.2 Datalink In Datalink page, you can check the current datalink:
7

3.3 Satellites In Satellites page, you can do the following:

SHANGHAI ESURVEY GNSS CO., LTD.

 Set cut-off angle  View satellites in table or skyplot
8

SHANGHAI ESURVEY GNSS CO., LTD.
3.4 Information In Information page, you can view the following information:
 Receiver  Antenna  GNSS board  Network  UHF
9

SHANGHAI ESURVEY GNSS CO., LTD.
3.5 Working Mode In Working Mode page, you can configure the working mode, including base, rover and static:
10

SHANGHAI ESURVEY GNSS CO., LTD.
3.6 Satellite Settings In Satellite Setting page, you can do the following:
 Configure the satellites to be used, including GPS, GLONASS, Beidou, GALILEO, SBAS and QZSS.
 Set RTK timeout: with Hemisphere L-Band service, high accuracy can be still kept within the set timeout even if correction data loses.
 Set surefix: the Hemisphere technology to increase the reliability of the fixed solution, which means it will be much more difficult to get fixed solution in tough environment.
11

SHANGHAI ESURVEY GNSS CO., LTD.
3.7 Device Configuration In Device Configuration page, you can do the following:
 Set time zone.  Select whether to enable direct link mode, and IMU sensor data output.  Set 5-pin serial port baud rate.  Select whether to enable speaker (smart voice broadcast).  Select whether to enable base alert.  Select whether to enable device debug.  Select whether the power is on automatically when 5-pin cable is connected.  Select whether the power is off automatically when 5-pin cable is disconnected.  Select whether to enable network.  Select whether to enable WIFI hotspot share network: with a SIM card inserted and
it enabled, the device connected to the hotspot of the receiver (PC, smart phone or tablet) can surf the internet by using SIM data.  Set naming method of static files.  Select whether to enable base transmission site info.
12

SHANGHAI ESURVEY GNSS CO., LTD.
3.8 NMEA Message In NMEA Message page, you can do the following:
 Configure NMEA data output through Bluetooth or 5-pin port.  Select whether to enable automatic output GNSS PPP message.  Select whether to enable external port output NMEA.  Select whether to record NMEA.
13

SHANGHAI ESURVEY GNSS CO., LTD.
3.9 View Logs In View Logs page, you can do the following for troubleshooting:
 View App logs and OS logs.  Download files of App logs and OS logs.
14

3.10 Raw Data In Raw Data page, you can do the following:

SHANGHAI ESURVEY GNSS CO., LTD.

 Download raw data and NMEA data.  Convert data to RINEX format.  Download multiple files by checking the target files and clicking Package.
15

SHANGHAI ESURVEY GNSS CO., LTD.
3.11 Backup Data The points collected in SurPad software will be automatically backed up in receiver storage to avoid data loss. You can download the data for later use. In Backup Data page, you can do the following:
 Download point data.  Delete point data.
16

3.12 Management In Management page, you can do the following:

SHANGHAI ESURVEY GNSS CO., LTD.

 Install new firmware.  Register the device.  Register the GNSS.  Set security: to set password of web UI (192.168.10.1) and receiver WIFI.  Format the internal disk.  Do self-testing.  Restore factory settings.  Reset: to restart the receiver.
17

SHANGHAI ESURVEY GNSS CO., LTD.
4 Basic Operations
It introduces basic process of starting working with the device. 4.1 Insert a SIM Card The device supports network working mode. To insert a SIM card, open the cover of nano SIM and insert a SIM card. 4.2 Charge the Battery The device is equipped with Type-C charger which supports maximum 45W PD quick charge. It takes 4 hours to fully charge the battery:
 Red indicator: the battery is in charging.  Green indicator: the battery is fully charged. To charge the battery, open the cover of type-C, and connect one end of the cable to the type-C interface and another end of the cable to the charger. 4.3 Connect to the External Power Power supply from 5-pin port is supported, and the external battery within 9-28VDC is required.
CAUTION: It is not used for charging. Please use the original cable provided by us or cable with LPS standard. To connect to the external power, open the cover of 5-pin port and connect one end of the cable to the 5-pin port and another end of the cable to the external battery. 4.4 Install the Radio Antenna The antenna is required when the datalink is set to internal radio. To insert radio antenna, open the cover of UHF radio, and install the radio antenna.
18

SHANGHAI ESURVEY GNSS CO., LTD.
4.5 Measure Antenna Height Antenna height refers to the vertical distance between the phase center and the ground. Since the antenna height cannot be directly measured, it is automatically calculated by SurPad software based on the measured height you input and measurement type you select.
CAUTION: No matter what the value of measured height you input and what kind of measurement type you select, the value of antenna height is unique. The principle is as follows:
 h: the vertical height from the phase center to the ground.  s: the slant height from the measuring line to the ground.  a: the pole height, that is, the vertical height from the ground to the device bottom. To measure antenna height, do one of the following:  Set the measured height to the slant height and measurement type to slant height.  Set the measured height to the pole height and measurement type to pole height. The SurPad software automatically calculates the antenna height.
19

SHANGHAI ESURVEY GNSS CO., LTD.
4.6 Start Tilt Measurement
The device can support both E-bubble and IMU, which is determined by the activation code and service you purchase, but you cannot use both of them at the same time. 4.6.1 Start E-bubble Tilt Measurement It is required when tilt measurement is used and E-bubble is used. Before starting E-bubble tilt measurement, to enable E-bubble tilt measurement, in SurPad software, press main menu Device  Device Setting, and set tilt survey to E-Bubble. To Start E-bubble tilt measurement in SurPad software, do the following:
1. Press main menu Survey  Point Survey to enter the main interface of point

survey, select shows:

in the point type area, and press

. Tilt Point interface

2. Optional: To modify antenna parameters, press Antenna Parameters, and set antenna parameters.
3. To start collecting tilt points, press Start. 4. Incline the pole with the inclined angle greater than 5°. The SurPad software
automatically collects the first tilt point.
20

SHANGHAI ESURVEY GNSS CO., LTD.
5. Change the inclined direction and repeat step 4 until 3 tilt points are collected. After 3 tilt points are collected, the following interface shows:
21

SHANGHAI ESURVEY GNSS CO., LTD.
6. To save the result, press Save. The following interface shows:
22

SHANGHAI ESURVEY GNSS CO., LTD.

4.6.2 Start IMU Tilt Measurement

It is required when tilt measurement is used and IMU is used.

Before starting IMU tilt measurement, to enable IMU tilt measurement, in SurPad software, press main menu Device  Device Setting, and set tilt survey to Pole Tilt Correction.
To start IMU tilt measurement in SurPad software, press main menu Survey  Point Survey to enter the main interface of point survey, and do as the prompt in the interface:

Status

What it means

What to do

Magnetic calibration is required.

Take the pole and draw a circle towards the ground.

Initialization is required.

Shake the pole or walk around.

The accuracy of tilt measurement is not enough.

Wait.

The tilt angle exceeds 60°.

Make sure the tilt angle is within 0° - 60°.

Tilt measurement is successfully enabled.

Start survey.

23

SHANGHAI ESURVEY GNSS CO., LTD.

5 Internal Radio

E300 Pro is equipped with 1 W internal radio. You can select the transmission power from 0.5W or 1W. There are 8 default channel frequency in which channel 8 is changeable. With firmware updated, lots of protocols in survey industrial are supported.

The default channel frequency is as follows:

Channel

Frequency (Unit: MHz)

1

441

2

442

3

443

4

444

5

445

6

446

7

447

8

448 (Changeable)

The supported radio protocol includes the following:

 Satel  PCC-4FSK  PCC-GMSK  TrimTalk 450S  South 9600  HiTarget(9600)  HiTarget(19200)  Trimmark III  South 19200  TrimTalk(4800)  GEOTALK  GEOMARK  900M Hopping  HZSZ  GEO FHSS  Satel_ADL  PCCFST  PCCFST_ADL

CAUTION: Some of the protocols may require firmware updating.

24

SHANGHAI ESURVEY GNSS CO., LTD.

6 Standard Accessories

The standard accessories for the base station and rover station are as follows:

Items

Model

Description

Base Rover Picture

Base

Carrying -

Case (1)

E300 Pro

GNSS Receiver

-

(1)

Carry case -









Charger (1)

-

Type-C port, UK/America/Europe/Australia





Power Cable (1)

-

Type-C to Type-C





Measuring Tape (1)

-

3m/10ft-16mm





UHF Antenna (1)

QT440A (430 450MHz)

QT410A(410 - 430MHz) optional QT450A (450 - 470MHz) optional QT900L-T (902 - 928MHz, TRM121) optional





Extension Pole (1)

-

25cm



×

Tribratch Adapter (1)

-

-





Plate

Antenna -

-

Adapter (1)

Warranty Card (1)

-

-



×





CAUTION: Standard accessories may change, and the actual accessories shall prevail.

25

To be the leading provider of high-precision professional, solution & service in the global geospatial industry
Shanghai eSurvey GNSS Co., Ltd.
Address: Building 4, No.651 Wanfang Rd, Pujiang Town, Minhang District, Shanghai, China E-mail: Sales: info@esurvey-gnss.com Support: support@esurvey-gnss.com Hote-line: +86 21 54467213 Website: https://esurvey-gnss.com/

References

• Welcome to eSurvey GNSS

Microsoft Word 2013