Gigabyte b450 aorus pro инструкция на русском

инструкцияGigabyte B450 Aorus PRO

To reduce the impacts on global warming, the packaging materials of this product

are recyclable and reusable. GIGABYTE works with you to protect the environment.

For more product details, please visit GIGABYTE’s website.

B450 AORUS PROB450 AORUS PRO WIFI

B450 AORUS PRO WIFI

B450 AORUS PRO

User’s Manual

Rev. 1001

12ME-B45ASPW-1001R

• Contents

• Table of Contents

• Bookmarks

Summary of Contents for Gigabyte B450 AORUS PRO WIFI

This manual is also suitable for:

B450 aorus pro

To reduce the impacts on global warming, the packaging materials of this product

are recyclable and reusable. GIGABYTE works with you to protect the environment.

For more product details, please visit GIGABYTE’s website.

B450 AORUS PROB450 AORUS PRO WIFI

Wireless Module Country Approvals:

Jun. 11, 2018

Motherboard

B450 AORUS PRO WIFI

Motherboard

B450 AORUS PRO WIFI

Jun. 11, 2018

Motherboard

B450 AORUS PRO

Jun. 11, 2018

Jun. 11, 2018

Motherboard

B450 AORUS PRO

— 4 —

Table of Contents

B450 AORUS PRO (WIFI) Motherboard Layout ……………………………………………………..5

Chapter 1 Hardware Installation ………………………………………………………………………….6

1-1 Installation Precautions ………………………………………………………………………… 6

1-2 ProductSpecications ………………………………………………………………………….. 7

1-3 Installing the CPU ……………………………………………………………………………… 10

1-4 Installing the Memory …………………………………………………………………………. 10

1-5 Installing an Expansion Card ………………………………………………………………. 11

1-6 Back Panel Connectors ………………………………………………………………………. 11

1-7 Internal Connectors ……………………………………………………………………………. 13

Chapter 2 BIOS Setup ……………………………………………………………………………………..23

2-1 Startup Screen ………………………………………………………………………………….. 23

2-2 The Main Menu …………………………………………………………………………………. 24

2-3 M.I.T. ……………………………………………………………………………………………….. 25

2-4 System …………………………………………………………………………………………….. 29

2-5 BIOS ………………………………………………………………………………………………… 30

2-6 Peripherals ……………………………………………………………………………………….. 33

2-7 Chipset …………………………………………………………………………………………….. 35

2-8 Power ………………………………………………………………………………………………. 37

2-9 Save & Exit ……………………………………………………………………………………….. 39

Chapter 3 Appendix …………………………………………………………………………………………40

3-1 ConguringaRAIDSet ………………………………………………………………………. 40

3-2 DriversInstallation ……………………………………………………………………………… 42

Regulatory Statements …………………………………………………………………………………. 43

Contact Us …………………………………………………………………………………………………. 48

— 5 —

B450 AORUS PRO (WIFI) Motherboard Layout

* The box contents above are for reference only and the actual items shall depend on the product package you obtain.

The box contents are subject to change without notice.

Box Contents

5B450 AORUS PRO WIFI or B450 AORUS PRO motherboard

5Two SATA cables 5M.2 screw(s)/M.2 standoff(s)

5Motherboard driver disk 5One G Connector

5User’s Manual 5One Wi-Fi antenna (Note)

(Note) Only for the B450 AORUS PRO WIFI.

CPU DRAM

VGA BOOT

Socket AM4

AMDB450

R_USB30 CPU_FAN

ATX_12V

ATX

F_AUDIO

AUDIO

B_BIOS

PCIEX4

DDR4_2

DDR4_1

DDR4_4

DDR4_3

BAT

F_PANEL

PCIEX1_2

CLR_CMOS

CODEC

M_BIOS

PCIEX1_1

PCIEX16

SPDIF_O

B450 AORUS PRO (WIFI)

DVI

TYPEC

HDMI

USB30_LAN

SATA3

iTE®

Super I/O

F_USB1

LED_C

SYS_FAN2

TPM

M2A_SOCKET

Intel®

GbE LAN

0 2

1 3

F_USB30

42

6080

110

CPU_OPT

LED_CPU

M2_WIFI (Note)

SYS_FAN1

42

6080

M2B_SOCKET

F_USB2SYS_FAN3_PUMPD_LED1

DLED_V_SW1

WIFI Module (Note)

D_LED2

DLED_V_SW2

USB31

ASATA3 1 0

Chapter 1 Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damagedasaresultofelectrostaticdischarge(ESD).Priortoinstallation,carefullyreadtheuser’s

manual and follow these procedures:

•Prior to installation, make sure the chassis is suitable for the motherboard.

•Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

•Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

•When connecting hardware components to the internal connectors on the motherboard, make

sure they are connected tightly and securely.

•When handling the motherboard, avoid touching any metal leads or connectors.

•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

componentssuchasamotherboard,CPUormemory.IfyoudonothaveanESDwriststrap,

keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.

•Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

•Before connecting or unplugging the power supply cable from the motherboard, make sure

the power supply has been turned off.

•Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

•Before using the product, please verify that all cables and power connectors of your hardware

components are connected.

•To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

•Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

•Donotplacethecomputersystemonanunevensurface.

•Donotplacethecomputersysteminahigh-temperatureorwetenvironment.

•Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

•If you are uncertain about any installation steps or have a problem related to the use of the

product,pleaseconsultacertiedcomputertechnician.

•If you use an adapter, extension power cable, or power strip, ensure to consult with its installation

and/or grounding instructions.

— 6 —

1-2 ProductSpecications

CPU AM4 Socket:

- AMDRyzen™ 2nd Generation processors

- AMDRyzen™ with Radeon™ Vega Graphics processors

- AMDRyzen™ 1st Generation processors

(Go to GIGABYTE’s website for the latest CPU support list.)

Chipset AMDB450

Memory 4xDDR4DIMMsocketssupportingupto64GBofsystemmemory

Dualchannelmemoryarchitecture

SupportforDDR42933/2667/2400/2133MHzmemorymodules

SupportforECCUn-bufferedDIMM1Rx8/2Rx8memorymodules(operate in

non-ECC mode)

Supportfornon-ECCUn-bufferedDIMM1Rx8/2Rx8/1Rx16memorymodules

SupportforExtremeMemoryProle(XMP)memorymodules

(Go to GIGABYTE’s website for the latest supported memory speeds and memory

modules.)

Onboard

Graphics (Note 1)

Integrated Graphics Processor:

 - 1xDVI-Dport,supportingamaximumresolutionof1920×1200@60Hz

* TheDVI-DportdoesnotsupportD-Subconnectionbyadapter.

- 1xHDMIport,supportingamaximumresolutionof4096×2160@60Hz (Note 1)

* SupportforHDMI2.0versionandHDCP2.2. (Note 1)

— Maximum shared memory of 16 GB

Audio Realtek® ALC1220 codec

HighDenitionAudio

2/4/5.1/7.1-channel

SupportforS/PDIFOut

LAN Intel® GbE LAN chip (10/100/1000 Mbit)

Wireless

Communication

Module (Note 2)

Wi-Fi802.11a/b/g/n/ac,supporting2.4/5GHzDual-Band

BLUETOOTH 4.2

Support for 11ac wireless standard and up to 433 Mbps data rate

* Actual data rate may vary depending on environment and equipment.

Expansion Slots 1 x PCI Express x16 slot, running at x16 (PCIEX16) (Note 1)

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.

(The PCIEX16 slot conforms to PCI Express 3.0 standard.)

1 x PCI Express x16 slot, running at x4 (PCIEX4)

* The PCIEX4 slot shares bandwidth with the PCIEX1_1 and PCIEX1_2 slots. The

PCIEX4 slot operates at up to x2 mode when the PCIEX1_1/PCIEX1_2 slot is

populated. The PCIEX4 slot operates at up to x4 mode when both of the PCIEX1_1

and PCIEX1_2 slots are empty.

1 x PCI Express x16 slot, running at x1 (PCIEX1_2)

1 x PCI Express x1 slot (PCIEX1_1)

(The PCIEX4 and PCIEX1 slots conform to PCI Express 2.0 standard.)

1 x M.2 Socket 1 connector for a wireless communication module (M2_WIFI) (Note 2)

* Only the B450 AORUS PRO WIFI includes the wireless communication module. (Note 2)

Multi-Graphics

Technology SupportforAMDQuad-GPUCrossFire™and2-WayAMDCrossFire™ technologies

(Note 1) Actual support may vary by CPU.

(Note 2) Only for the B450 AORUS PRO WIFI.

— 7 —

Storage Interface  1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe

3.0x4/x2SSDsupport)(M2A_SOCKET)

1x M.2 connector(Socket 3,M key,type 2242/2260/2280PCIe 3.0 x2SSD

support)(M2B_SOCKET)

 6 x SATA 6Gb/s connectors

SupportforRAID0,RAID1,andRAID10

* Refer to «1-7 Internal Connectors,» for the installation notices for the M.2 and SATA

connectors.

USB Chipset:

— 1 x USB Type-C™ port on the back panel, with USB 3.1 Gen 2 support

— 1 x USB 3.1 Gen 2 Type-A port (red) on the back panel

— 2 x USB 3.1 Gen 1 ports available through the internal USB header

— 4 x USB 2.0/1.1 ports available through the internal USB headers

CPU:

— 4 x USB 3.1 Gen 1 ports on the back panel

Internal

Connectors

1 x 24-pin ATX main power connector

1 x 8-pin ATX 12V power connector

2 x M.2 Socket 3 connectors

6 x SATA 6Gb/s connectors

1 x CPU fan header

1 x water cooling CPU fan header

2 x system fan headers

1 x system fan/water cooling pump header

1xCPUcoolerLEDstrip/RGBLEDstripheader

2xdigitalLEDstripheaders

2xdigitalLEDstrippowerselectjumpers

1xRGB(RGBW)LEDstripheader

1 x front panel header

1 x front panel audio header

1xS/PDIFOutheader

1 x USB 3.1 Gen 1 header

2 x USB 2.0/1.1 headers

 1 x Trusted Platform Module (TPM) header (2×10 pin, for the GC-TPM2.0 module

only)

1 x Clear CMOS jumper

Back Panel

Connectors

1xHDMIport

2 x SMA antenna connectors (1T1R) (Note)

1xDVI-Dport

4 x USB 3.1 Gen 1 ports

1 x USB Type-C™ port, with USB 3.1 Gen 2 support

1 x USB 3.1 Gen 2 Type-A port (red)

1 x RJ-45 port

1xopticalS/PDIFOutconnector

 5 x audio jacks

I/O Controller iTE® I/O Controller Chip

Hardware

Monitor

Voltage detection

Temperature detection

Fan speed detection

Water cooling ow rate detection

(Note) Only for the B450 AORUS PRO WIFI.

— 8 —

Hardware

Monitor

Overheating warning

Fan fail warning

Fan speed control

* Whether the fan (pump) speed control function is supported will depend on the fan

(pump) you install.

BIOS 2x128Mbitash

Use of licensed AMI UEFI BIOS

SupportforDualBIOS™

PnP1.0a,DMI2.7,WfM2.0,SMBIOS2.7,ACPI5.0

Unique Features Support for APP Center

* Available applications in APP Center may vary by motherboard model. Supported

functionsofeachapplicationmayalsovarydependingonmotherboardspecications.

- 3DOSD

- @BIOS

— AutoGreen

— Cloud Station

— EasyTune

— Fast Boot

— Game Boost

— ON/OFF Charge

— RGB Fusion

— Smart Backup

— Smart Keyboard

— Smart TimeLock

- SmartHUD

— Smart Survey

— System Information Viewer

— USB Blocker

— V-Tuner

SupportforQ-Flash

Support for Xpress Install

Bundled

Software

Norton® Internet Security (OEM version)

cFosSpeed

Operating

System Support for Windows 10 64-bit

Form Factor ATX Form Factor; 30.5cm x 24.4cm

* GIGABYTEreservestherighttomakeanychangestotheproductspecicationsandproduct-relatedinformationwithout

prior notice.

Please visit GIGABYTE’s website for support lists of CPU, memory

modules,SSDs,andM.2devices.

Please visit the SupportUtility List page on GIGABYTE’s website to download the latest

version of apps.

B450 AORUS PROB450 AORUS PRO WIFI

— 9 —

1-4 Installing the Memory

DualChannelMemoryConguration

ThismotherboardprovidesfourmemorysocketsandsupportsDualChannelTechnology.Afterthememory

isinstalled,theBIOSwillautomaticallydetectthespecicationsandcapacityofthememory.EnablingDual

Channel memory mode will double the original memory bandwidth.

The four memory sockets are divided into two channels and each channel has two memory sockets as following:

ChannelA:DDR4_2,DDR4_4

ChannelB:DDR4_1,DDR4_3

Read the following guidelines before you begin to install the memory:

•Make sure that the motherboard supports the memory. It is recommended that memory of the

same capacity, brand, speed, and chips be used.

(Go to GIGABYTE’s website for the latest supported memory speeds and memory modules.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

memory to prevent hardware damage.

•Memory modules have a foolproof design. A memory module can be installed in only one direction.

If you are unable to insert the memory, switch the direction.

1-3 Installing the CPU

Installing the CPU

Locate the pin one (denoted by a small triangle) of the CPU socket and the CPU.

AM4 Socket

A Small Triangle Marking

DenotesPinOneofthe

Socket AM4 CPU

A Small Triangle Marking

DenotesCPUPinOne

Read the following guidelines before you begin to install the CPU:

•Make sure that the motherboard supports the CPU.

(Go to GIGABYTE’s website for the latest CPU support list.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

CPU to prevent hardware damage.

•Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly.

•Apply an even and thin layer of thermal grease on the surface of the CPU.

•DonotturnonthecomputeriftheCPUcoolerisnotinstalled,otherwiseoverheatinganddamage

of the CPU may occur.

•SettheCPUhostfrequencyinaccordancewiththeCPUspecications.Itisnotrecommended

thatthesystembusfrequencybesetbeyondhardwarespecicationssinceitdoesnotmeetthe

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

specications,pleasedosoaccordingtoyourhardwarespecicationsincludingtheCPU,graphics

card, memory, hard drive, etc.

DualChannelMemoryCongurationsTable:

DDR4_4 DDR4_2 DDR4_3 DDR4_1

Two Modules — — DS/SS — — DS/SS

DS/SS — — DS/SS — —

Four Modules DS/SS DS/SS DS/SS DS/SS

(SS=Single-Sided,DS=Double-Sided,»--«=NoMemory)

Please visit GIGABYTE’s website for details on hardware installation.

— 10 —

1-5 Installing an Expansion Card

Read the following guidelines before you begin to install an expansion card:

•Make sure the motherboard supports the expansion card. Carefully read the manual that came

with your expansion card.

•Always turn off the computer and unplug the power cord from the power outlet before installing an

expansion card to prevent hardware damage.

1-6 Back Panel Connectors

USB 3.1 Gen 1 Port

TheUSB3.1Gen1portsupportstheUSB3.1Gen1specicationandiscompatibletotheUSB2.0

specication.UsethisportforUSBdevices.

HDMI Port

TheHDMIportsupportsHDCP2.2(Note 2)andDolbyTrueHDandDTSHDMaster

Audioformats.Italsosupportsupto192KHz/24bit8-channelLPCMaudiooutput.

YoucanusethisporttoconnectyourHDMI-supportedmonitor.Themaximumsupportedresolutionis

4096×2160@60Hz(Note 2), but the actual resolutions supported are dependent on the monitor being used.

SMA Antenna Connectors (1T1R) (Note 1)

Use this connector to connect an antenna.

(Note 1) Only for the B450 AORUS PRO WIFI.

(Note 2) Actual support may vary by CPU.

(Note3) TheDVI-DportdoesnotsupportD-Subconnectionbyadapter.

AfterinstallingtheHDMIdevice,makesuretosetthedefaultsoundplaybackdevicetoHDMI.(The

item name may differ depending on your operating system.)

DuetoCPUlimitations,readthefollowingguidelinesbeforeinstallingthememoryinDualChannelmode.

1. DualChannelmodecannotbeenabledifonlyonememorymoduleisinstalled.

2. WhenenablingDualChannelmodewithtwoorfourmemorymodules,itisrecommendedthatmemory

of the same capacity, brand, speed, and chips be used. For optimum performance, when enabling

DualChannelmodewithtwomemorymodules,werecommendthatyouinstallthemintheDDR4_1

andDDR4_2sockets.

(Note 1)

Tighten the antenna cables to the antenna connectors and then move the antenna to a place

where the signal is good.

DVI-D Port (Note 3)

TheDVI-DportconformstotheDVI-Dspecicationandsupportsamaximumresolutionof1920×1200@60Hz

(theactualresolutionssupporteddependonthemonitorbeingused).ConnectamonitorthatsupportsDVI-D

connection to this port.

USB 3.1 Gen 2 Type-A Port (Red)

TheUSB3.1Gen2Type-AportsupportstheUSB3.1Gen2specicationandiscompatibletotheUSB

3.1Gen1andUSB2.0specication.UsethisportforUSBdevices.

USB Type-C™ Port

ThereversibleUSBportsupportstheUSB3.1Gen2specicationandiscompatibletotheUSB3.1Gen1

andUSB2.0specication.UsethisportforUSBdevices.

— 11 —

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describesthestatesoftheLANportLEDs.

Center/Subwoofer Speaker Out (Orange)

Use this audio jack to connect center/subwoofer speakers.

Rear Speaker Out (Black)

This jack can be used to connect rear speakers.

Optical S/PDIF Out Connector

This connector provides digital audio out to an external audio system that supports digital optical audio.

Before using this feature, ensure that your audio system provides an optical digital audio in connector.

Line In/Rear Speaker Out (Blue)

The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.

Line Out/Front Speaker Out (Green)

The line out jack. This jack supports audio amplifying function. For better sound quality, it is recommended

that you connect your headphone/speaker to this jack (actual effects may vary by the device being used).

Mic In/Side Speaker Out (Pink)

The Mic in jack.

ActivityLED

Connection/

SpeedLED

LAN Port

ActivityLED:

Connection/SpeedLED:

State Description

Orange 1 Gbps data rate

Green 100 Mbps data rate

Off 10 Mbps data rate

State Description

Blinking Datatransmissionorreceivingisoccurring

On No data transmission or receiving is occurring

•Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefromyour

device and then remove it from the motherboard.

•Whenremovingthecable,pullitstraightoutfromtheconnector.Donotrockitsidetosideto

prevent an electrical short inside the cable connector.

AudioJackCongurations:

Jack Headphone/

2-channel 4-channel 5.1-channel 7.1-channel

Center/Subwoofer Speaker Out a a

Rear Speaker Out a a a

Line In/Side Speaker Out a

Line Out/Front Speaker Out a a a a

Mic In/Side Speaker Out a

•ToenableorconguretheaudioamplifyingfunctionfortheLineoutjack,pleaseaccesstheHD

Audio Manager application.

•Please visit GIGABYTE’s website

for more audio software information.

PleasevisitGIGABYTE’swebsitefordetailsonconguringtheaudiosoftware.

— 12 —

1-7 Internal Connectors

Read the following guidelines before connecting external devices:

•First make sure your devices are compliant with the connectors you wish to connect.

•Before installing the devices, be sure to turn off the devices and your computer. Unplug the power

cord from the power outlet to prevent damage to the devices.

•After installing the device and before turning on the computer, make sure the device cable has

been securely attached to the connector on the motherboard.

1

4

156

7

13

11

20

18

2

3

12

16 19

21

17

22

4

5

10

9

9 8

13

10

14

1) ATX_12V

2) ATX

3) CPU_FAN

4) SYS_FAN1/2

5) CPU_OPT

6) SYS_FAN3_PUMP

7) LED_CPU

LED_C

9) D_LED1/D_LED2

10) DLED_V_SW1/DLED_V_SW2

11) ASATA3 0/1

12) SATA3 0/1/2/3

13) M2A_SOCKET/M2B_SOCKET

14) SPDIF_O

15) F_PANEL

16) F_AUDIO

17) BAT

18) CLR_CMOS

19) F_USB30

20) F_USB1/F_USB2

21) TPM

22) CPU/DRAM/VGA/BOOT

— 13 —

131

2412

ATX

1/2) ATX_12V/ATX (2×4 12V Power Connector and 2×12 Main Power Connector)

With the use of the power connector, the power supply can supply enough stable power to all the components

onthemotherboard.Beforeconnectingthepowerconnector,rstmakesurethepowersupplyisturned

off and all devices are properly installed. The power connector possesses a foolproof design. Connect the

power supply cable to the power connector in the correct orientation.

The 12V power connector mainly supplies power to the CPU. If the 12V power connector is not connected,

the computer will not start.

To meet expansion requirements, it is recommended that a power supply that can withstand high

power consumption be used (500W or greater). If a power supply is used that does not provide the

required power, the result can lead to an unstable or unbootable system.

ATX:

Pin No. Denition Pin No. Denition

1 3.3V 13 3.3V

2 3.3V 14 -12V

3GND 15 GND

4 +5V 16 PS_ON (soft On/Off)

5GND 17 GND

6 +5V 18 GND

7GND 19 GND

8 Power Good 20 NC

9 5VSB (stand by +5V) 21 +5V

10 +12V 22 +5V

11 +12V (Only for 2×12-pin

ATX)

23 +5V (Only for 2×12-pin ATX)

12 3.3V (Only for 2×12-pin

ATX)

24 GND(Onlyfor2×12-pinATX)

ATX_12V:

Pin No. Denition Pin No. Denition

1GND(Onlyfor2×4-pin12V) 5 +12V (Only for 2×4-pin 12V)

2GND(Onlyfor2×4-pin12V) 6 +12V (Only for 2×4-pin 12V)

3GND 7 +12V

4GND 8 +12V

ATX_12V

4

1

8

5

3/4) CPU_FAN/SYS_FAN1/2 (Fan Headers)

All fan headers on this motherboard are 4-pin. Most fan headers possess a foolproof insertion design.

When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is

the ground wire). The speed control function requires the use of a fan with fan speed control design. For

optimum heat dissipation, it is recommended that a system fan be installed inside the chassis.

•Be sure to connect fan cables to the fan headers to prevent your CPU and system from

overheating. Overheating may result in damage to the CPU or the system may hang.

•Thesefanheadersarenotcongurationjumperblocks.Donotplaceajumpercapontheheaders.

CPU_FAN

SYS_FAN2

1

1Pin No. Denition

1 GND

2 Voltage Speed Control

3 Sense

4 PWM Speed Control

SYS_FAN1

1

— 14 —

6) SYS_FAN3_PUMP (System Fan/Water Cooling Pump Header)

The fan/pump header is 4-pin and possess a foolproof insertion design. Most fan headers possess a

foolproof insertion design. When connecting a fan cable, be sure to connect it in the correct orientation

(the black connector wire is the ground wire). The speed control function requires the use of a fan with

fan speed control design. For optimum heat dissipation, it is recommended that a system fan be installed

inside the chassis. The header also provides speed control for a water cooling pump, refer to Chapter 2,

«BIOS Setup,» «M.I.T.,» for more information.

1

5) CPU_OPT (Water Cooling CPU Fan Header)

The fan header is 4-pin and possesses a foolproof insertion design. Most fan headers possess a foolproof

insertion design. When connecting a fan cable, be sure to connect it in the correct orientation (the black

connector wire is the ground wire). The speed control function requires the use of a fan with fan speed control

design.

1

Pin No. Denition

1 GND

2 Voltage Speed Control

3 Sense

4 PWM Speed Control

Pin No. Denition

1 GND

2 Voltage Speed Control

3 Sense

4 PWM Speed Control

Pin No. Denition

1 12V

2 G

3 R

4 B

1

7) LED_CPU (CPU Cooler LED Strip/RGB LED Strip Header)

 TheheadercanbeusedtoconnectaCPUcoolerLEDstriporastandard5050RGBLEDstrip(12V/G/R/B),

with maximum power rating of 2A (12V) and maximum length of 2m.

ConnecttheCPUcoolerLEDstrip/RGBLEDstriptotheheader.The

powerpin(markedwithatriangleontheplug)oftheLEDstripmust

be connected to Pin 1 of this header. Incorrect connection may lead

tothedamageoftheLEDstrip.

LEDStrip

1

12V

— 15 —

9) D_LED1/D_LED2 (Digital LED Strip Headers)

 Theheaderscanbeusedtoconnectastandard5050digitalLEDstrip,withmaximumpowerratingof2A

(12Vor5V)andmaximumlengthof5mormaximumnumberof300LEDs.Thereare12Vand5Vdigital

LEDstrips.BesuretoverifythevoltagerequirementsofyourdigitalLEDstripandsettheDLED_V_SW1

andDLED_V_SW2jumpersaccordingly.

Pin No. Denition

1 V

2D

3 No Pin

4 G

Before installing the devices, be sure to turn off the devices and your computer. Unplug the power

cord from the power outlet to prevent damage to the devices.

Forhowtoturnon/offthelightsoftheLEDstrip,refertotheinstructionsoninChapter2,«BIOS

Setup,» «Peripherals.»

D_LED1 D_LED2

ConnectyourdigitalLEDstriptotheheader.Thereare12Vand5V

digitalLEDstrips.Besuretoverifythevoltagerequirementsofyour

digitalLED strips andset theDLED_V_SW1 and DLED_V_SW2

jumpers accordingly. The power pin (marked with a triangle on the

plug)oftheLEDstripmustbeconnectedtoPin1ofthedigitalLEDstrip

header.IncorrectconnectionmayleadtothedamageoftheLEDstrip.

1

LED_C (RGB (RGBW) LED Strip Header)

 Theheadercanbeusedtoconnectastandard5050RGB(RGBW)LEDstrip(12V/G/R/B/W),withmaximum

power rating of 2A (12V) and maximum length of 2m.

Pin No. Denition

1 12V

2 G

3 R

4 B

5 W

1

ConnectyourRGB(RGBW)LEDstriptotheheader.Thepowerpin

(markedwithatriangleontheplug)oftheLEDstripmustbeconnected

to Pin 1 (12V) of this header. Incorrect connection may lead to the

damageoftheLEDstrip.

RGBW

LEDStrip

1

12V

RGB

LEDStrip

1

12V

1

DigitalLED

Strip

1

— 16 —

10) DLED_V_SW1/DLED_V_SW2 (Digital LED Strip Power Select Jumpers)

 ThejumpersallowyoutoselectthesupplyvoltageoftheD_LED1andD_LED2headers.Besureto

verifythevoltagerequirementsofyourdigitalLEDstripandsetthecorrectvoltagewiththisjumperbefore

connection.IncorrectconnectionmayleadtothedamageoftheLEDstrip.

1

1

1-2:5V(Default) 1-2:5V(Default)

2-3: 12V 2-3: 12V

DLED_V_SW1

1

1

DLED_V_SW2

11/12) ASATA3 0/1, SATA3 0/1/2/3 (SATA 6Gb/s Connectors)

The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and

SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. The SATA connectors

supportRAID0,RAID1,andRAID10.RefertoChapter3,«ConguringaRAIDSet,»forinstructions

onconguringaRAIDarray.

Pin No. Denition

1GND

2 TXP

3 TXN

4GND

5 RXN

6 RXP

7GND

SATA3

0 2

1 3 7

1

7 1

7 1

ASATA3 0

1

— 17 —

13) M2A_SOCKET/M2B_SOCKET (M.2 Socket 3 Connectors)

 TheM.2connectorssupportM.2SATASSDsorM.2PCIeSSDs(Note)andsupportRAIDconguration.

PleasenotethatanM.2PCIeSSDcannotbeusedtocreateaRAIDseteitherwithanM.2SATASSDora

SATAharddrive.TocreateaRAIDarraywithanM.2PCIeSSD,youmustsetupthecongurationinUEFI

BIOSmode.RefertoChapter3,»ConguringaRAIDSet,»forinstructionsonconguringaRAIDarray.

SelecttheproperholefortheM.2SSDtobeinstalledandrefastenthescrewandstandoff.

Installation Notices for the M.2 and SATA Connectors:

DuetothelimitednumberoflanesprovidedbytheChipset,theavailabilityoftheSATAconnectorsmay

be affected by the type of device installed in the M.2 connectors. Refer to the following table for details.

80110 60 42

80 60 42

M2A_SOCKET

M2B_SOCKET

•M2B_SOCKET:

SATA3 0 SATA3 1 SATA3 2 SATA3 3 ASATA3 0 ASATA3 1

M.2PCIex2SSD*

a a r r a a

NoM.2SSDInstalled aaaaaa

a: Available, r: Not available

* TheM2B_SOCKETconnectorsupportsuptoPCIex2SSDs.

Connector

Type of

M.2SSD

•M2A_SOCKET:

SATA3 0 SATA3 1 SATA3 2 SATA3 3 ASATA3 0 ASATA3 1

M.2SATASSD aaaaar

M.2PCIeSSD

aaaar r

NoM.2SSDInstalled aaaaaa

a: Available, r: Not available

Connector

Type of

M.2SSD

(Note) TheM2B_SOCKETconnectorsupportsonlyPCIeSSDs.

FollowthestepsbelowtocorrectlyinstallanM.2SSDintheM.2connector.

Step 1:

Get a screw and a standoff from the included M.2 screw kit. Locate the M.2 connector where you will install

theM.2SSD,useascrewdrivertounfastenthescrewontheheatsinkandthenremovetheheatsink.

Step 2:

LocatethepropermountingholefortheM.2SSDtobeinstalledandthentightenthestandoffrst.Insert

theM.2SSDintotheM.2connectoratanangle.

Step 3:

PresstheM.2SSDdownandthensecureitwiththescrew.Replacetheheatsinkandsecureittothe

original hole.

— 18 —

14) SPDIF_O (S/PDIF Out Header)

 ThisheadersupportsdigitalS/PDIFOutandconnectsaS/PDIFdigitalaudiocable(providedbyexpansion

cards) for digital audio output from your motherboard to certain expansion cards like graphics cards and

soundcards.Forexample,somegraphicscardsmayrequireyoutouseaS/PDIFdigitalaudiocablefor

digitalaudiooutputfromyourmotherboardtoyourgraphicscardifyouwishtoconnectanHDMIdisplay

tothegraphicscardandhavedigitalaudiooutputfromtheHDMIdisplayatthesametime.Forinformation

aboutconnectingtheS/PDIFdigitalaudiocable,carefullyreadthemanualforyourexpansioncard.

1

Pin No. Denition

15VDUAL

2 No Pin

3SPDIFO

4GND

The front panel design may differ by chassis. A front panel module mainly consists of power switch,

resetswitch,powerLED,harddriveactivityLED,speakerandetc.Whenconnectingyourchassis

front panel module to this header, make sure the wire assignments and the pin assignments are

matched correctly.

15) F_PANEL (Front Panel Header)

Connect the power switch, reset switch, speaker, chassis intrusion switch/sensor and system status indicator

on the chassis to this header according to the pin assignments below. Note the positive and negative pins

before connecting the cables.

System Status LED

S0 On

S3/S4/S5 Off

•PW (Power Switch, Red):

Connects to the power switch on the chassis front panel. You may

congurethewaytoturnoffyoursystemusingthepowerswitch(refer

to Chapter 2, «BIOS Setup,» «Power,» for more information).

•SPEAK (Speaker, Orange):

Connects to the speaker on the chassis front panel. The system reports

system startup status by issuing a beep code. One single short beep

will be heard if no problem is detected at system startup.

•PLED/PWR_LED (PowerLED,Yellow/Purple):

Connects to the power status indicator

onthechassisfrontpanel.TheLEDison

whenthesystemisoperating.TheLEDis

off when the system is in S3/S4 sleep state

or powered off (S5).

•HD (HardDriveActivityLED,Blue):

 ConnectstotheharddriveactivityLEDonthechassisfrontpanel.TheLEDisonwhentheharddrive

is reading or writing data.

•RES (Reset Switch, Green):

Connects to the reset switch on the chassis front panel. Press the reset switch to restart the computer

ifthecomputerfreezesandfailstoperformanormalrestart.

•CI (Chassis Intrusion Header, Gray):

Connects to the chassis intrusion switch/sensor on the chassis that can detect if the chassis cover has

been removed. This function requires a chassis with a chassis intrusion switch/sensor.

•NC (Orange): No Connection.

PowerLED

1

2

19

20

CI-

CI+

PWR_LED-

PWR_LED+

PLED-

PW-

SPEAK+

SPEAK-

PLED+

PW+

PowerLED

HD-

RES+

HD+

RES-

HardDrive

ActivityLED

Reset

Switch Chassis Intrusion

Header

Power Switch Speaker

PWR_LED-

NC

NC

— 19 —

17) BAT (Battery)

 Thebatteryprovidespowertokeepthevalues(suchasBIOScongurations,date,andtimeinformation)

in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low

level, or the CMOS values may not be accurate or may be lost.

You may clear the CMOS values by removing the battery:

1. Turn off your computer and unplug the power cord.

2. Gently remove the battery from the battery holder and wait for one minute. (Or use a

metal object like a screwdriver to touch the positive and negative terminals of the battery

holder, making them short for 5 seconds.)

3. Replace the battery.

4. Plug in the power cord and restart your computer.

•Always turn off your computer and unplug the power cord before replacing the battery.

•Replacethebatterywithanequivalentone.Damagetoyourdevicesmayoccurifthebatteryis

replaced with an incorrect model.

•Contact the place of purchase or local dealer if you are not able to replace the battery by yourself

or uncertain about the battery model.

•When installing the battery, note the orientation of the positive side (+) and the negative side (-)

of the battery (the positive side should face up).

•Used batteries must be handled in accordance with local environmental regulations.

16) F_AUDIO (Front Panel Audio Header)

 ThefrontpanelaudioheadersupportsHighDenitionaudio(HD).Youmayconnectyourchassisfront

panel audio module to this header. Make sure the wire assignments of the module connector match the

pin assignments of the motherboard header. Incorrect connection between the module connector and the

motherboard header will make the device unable to work or even damage it.

Some chassis provide a front panel audio module that has separated connectors on each wire instead

of a single plug. For information about connecting the front panel audio module that has different wire

assignments, please contact the chassis manufacturer.

9 1

10 2

Pin No. Denition Pin No. Denition

1 MIC2_L 6 Sense

2GND 7FAUDIO_JD

3 MIC2_R 8 No Pin

4 NC 9 LINE2_L

5 LINE2_R 10 Sense

— 20 —

20) F_USB1/F_USB2 (USB 2.0/1.1 Headers)

 TheheadersconformtoUSB2.0/1.1specication.EachUSBheadercanprovidetwoUSBportsviaan

optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer.

Pin No. Denition Pin No. Denition

1 Power (5V) 6 USBDY+

2 Power (5V) 7 GND

3USBDX- 8GND

4USBDY— 9 No Pin

5USBDX+ 10 NC

•DonotplugtheIEEE1394bracket(2×5-pin)cableintotheUSB2.0/1.1header.

•Prior to installing the USB bracket, be sure to turn off your computer and unplug the power cord

from the power outlet to prevent damage to the USB bracket.

10

9

2

1

Pin No. Denition Pin No. Denition

1 VBUS 11 D2+

2 SSRX1- 12 D2-

3 SSRX1+ 13 GND

4GND 14 SSTX2+

5 SSTX1- 15 SSTX2-

6 SSTX1+ 16 GND

7GND 17 SSRX2+

8D1- 18 SSRX2-

9D1+ 19 VBUS

10 NC 20 No Pin

19) F_USB30 (USB 3.1 Gen 1 Header)

The header conforms to USB 3.1 Gen 1 and USB 2.0 specication and can provide two USB ports. For

purchasing the optional 3.5″ front panel that provides two USB 3.1 Gen 1 ports, please contact the local

dealer.

10

11

1

20

18) CLR_CMOS (Clear CMOS Jumper)

 UsethisjumpertocleartheBIOScongurationandresettheCMOSvaluestofactorydefaults.Toclear

the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.

•Always turn off your computer and unplug the power cord from the power outlet before clearing

the CMOS values.

•Aftersystemrestart,gotoBIOSSetuptoloadfactorydefaults(selectLoadOptimizedDefaults)or

manuallyconguretheBIOSsettings(refertoChapter2,«BIOSSetup,»forBIOScongurations).

Open: Normal

Short: Clear CMOS Values

— 21 —

22) CPU/DRAM/VGA/BOOT (Status LEDs)

 Thestatus LEDs showwhether the CPU, memory,graphics card, andoperating system are working

properlyaftersystempower-on.IftheCPU/DRAM/VGALEDison,thatmeansthecorrespondingdevice

isnotworkingnormally;iftheBOOTLEDison,thatmeansyouhaven’tenteredtheoperatingsystemyet.

CPU: CPUstatusLED

DRAM: MemorystatusLED

VGA: GraphicscardstatusLED

BOOT: OperatingsystemstatusLED

CPU DRAM

VGA BOOT

20

19

2

1

21) TPM (Trusted Platform Module Header)

You may connect a TPM (Trusted Platform Module) to this header.

Pin No. Denition Pin No. Denition

1 LCLK 11 LAD0

2GND 12 GND

3 LFRAME 13 NC

4 No Pin 14 NC

5 LRESET 15 SB3V

6 NC 16 SERIRQ

7LAD3 17 GND

8LAD2 18 NC

9 VCC3 19 NC

10 LAD1 20 NC

— 22 —

Chapter 2 BIOS Setup

BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the

motherboard. Its major functions include conducting the Power-On Self-Test (POST) during system startup,

saving system parameters and loading operating system, etc. BIOS includes a BIOS Setup program that allows

theusertomodifybasicsystemcongurationsettingsortoactivatecertainsystemfeatures.

When the power is turned off, the battery on the motherboard supplies the necessary power to the CMOS to

keepthecongurationvaluesintheCMOS.

ToaccesstheBIOSSetupprogram,pressthe<Delete>keyduringthePOSTwhenthepoweristurnedon.

ToupgradetheBIOS,useeithertheGIGABYTEQ-Flashor@BIOSutility.

•Q-FlashallowstheusertoquicklyandeasilyupgradeorbackupBIOSwithoutenteringtheoperatingsystem.

•@BIOSisaWindows-basedutilitythatsearchesanddownloadsthelatestversionofBIOSfromtheInternet

and updates the BIOS.

•BecauseBIOSashingispotentiallyrisky,ifyoudonotencounterproblemsusingthecurrentversionofBIOS,

itisrecommendedthatyounotashtheBIOS.ToashtheBIOS,doitwithcaution.InadequateBIOSashing

may result in system malfunction.

•It is recommended that you not alter the default settings (unless you need to) to prevent system instability or other

unexpected results. Inadequately altering the settings may result in system’s failure to boot. If this occurs, try to

cleartheCMOSvaluesandresettheboardtodefaultvalues.(Refertothe»LoadOptimizedDefaults»sectionin

this chapter or introductions of the battery/clear CMOS jumper in Chapter 1 for how to clear the CMOS values.)

2-1 Startup Screen

The following startup Logo screen will appear when the computer boots.

(Sample BIOS Version: B450 AORUS PRO E9)

Function Keys

•When the system is not stable as usual, select the Load Optimized Defaults item to set your system to its defaults.

•The BIOS Setup menus described in this chapter are for reference only and may differ by BIOS version.

TherearetwodifferentBIOSmodesasfollowsandyoucanusethe<F2>keytoswitchbetweenthetwomodes.

The Classic Setup mode provides detailed BIOS settings. You can press the arrow keys on your keyboard to move

amongtheitemsandpress<Enter>toacceptorenterasub-menu.Oryoucanuseyourmousetoselecttheitemyou

want. Easy Mode allows users to quickly view their current system information or to make adjustments for optimum

performance.InEasyMode,youcanuseyourmousetomovethroughcongurationitems.

— 23 —

2-2 The Main Menu

Classic Setup Function Keys

<f><g>Move the selection bar to select a setup menu

<h><i> Movetheselectionbartoselectancongurationitemonamenu

<Enter> Execute command or enter a menu

<+>/<PageUp> Increase the numeric value or make changes

<—>/<PageDown> Decreasethenumericvalueormakechanges

<F1> Show descriptions of the function keys

<F2> Switch to Easy Mode

<F5> Restore the previous BIOS settings for the current submenus

<F7> LoadtheOptimizedBIOSdefaultsettingsforthecurrentsubmenus

<F8> AccesstheQ-Flashutility

<F9> Displaysysteminformation

<F10> Save all the changes and exit the BIOS Setup program

<F12> Capture the current screen as an image and save it to your USB drive

<Esc> Main Menu: Exit the BIOS Setup program

Submenus: Exit current submenu

CongurationItems Current Settings

Setup Menus

System Time

QuickAccessBarallowsyoutoenterEasyMode,select

BIOSdefaultlanguage,congurefansettings,orenter

Q-Flash.

Hardware

Information

— 24 —

2-3 M.I.T.

Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall

systemcongurations.Incorrectlydoingoverclock/overvoltagemayresultindamagetoCPU,chipset,ormemory

and reduce the useful life of these components. This page is for advanced users only and we recommend you not to

alter the default settings to prevent system instability or other unexpected results. Inadequately altering the settings

may result in system’s failure to boot. If this occurs, clear the CMOS values and reset the board to default values.)

`Advanced Frequency Settings

&Host Clock Value

 DisplaysthecurrentoperatingHostClockfrequency.

&GFX Clock Frequency (Note)

Allows you to alter the frequency for the GPU. After you alter the GFX Clock Frequency settings, make

sure to adjust the GFX Core Voltagesettings.(Default:Auto)

Note: The adjustable range is dependent on the CPU being installed. Auto lets the BIOS automatically

congurethissetting.

&GFX Core Voltage (Note)

 AllowsyoutoalterthevoltagefortheGPU.(Default:Auto)

Note: The adjustable range is dependent on the CPU being installed. Auto lets the BIOS automatically

congurethissetting.

&CPU Clock Ratio

Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU

being installed.

&CPU Frequency

 DisplaysthecurrentoperatingCPUfrequency.

`Advanced CPU Core Settings

&CPU Clock Ratio, CPU Frequency

The settings above are synchronous to those under the same items on the Advanced Frequency Settings

menu.

(Note) This item is present only when you install a CPU that supports this feature.

— 25 —

&Core Performance Boost

Allows you to determine whether to enable the Core Performance Boost (CPB) technology, a CPU

performance-boosttechnology.(Default:Auto)

&AMD Cool&Quiet function

Enabled   LetstheAMDCool’n’QuietdriverdynamicallyadjusttheCPUclockandVIDto

reduceheatoutputfromyourcomputeranditspowerconsumption.(Default)

Disabled   Disablesthisfunction.

&SVM Mode

 VirtualizationenhancedbyVirtualizationTechnologywillallowaplatformtorunmultipleoperatingsystems

andapplicationsinindependentpartitions.Withvirtualization,onecomputersystemcanfunctionasmultiple

virtualsystems.(Default:Disabled)

&Global C-state Control

Allows you to determine whether to let the CPU enter C states. When enabled, the CPU core frequency

willbereducedduringsystemhaltstatetodecreasepowerconsumption.(Default:Auto)

&Power Supply Idle Control

Enables or disables Package C6 State.

TypicalCurrentIdle Disablesthisfunction.

Low Current Idle Enables this function.

Auto LetstheBIOSautomaticallycongurethissetting. (Default)

&Opcache Control

(Note 1)

Enables or disables Opcache. AutoletstheBIOSautomaticallycongurethissetting.(Default:Auto)

&Downcore Control

Allows you to select the number of CPU cores to enable (the number of CPU cores may vary by CPU).

AutoletstheBIOSautomaticallycongurethissetting.(Default:Auto)

&SMT Mode

Allows you to enable or disable the CPU Simultaneous Multi-Threading technology. This feature only works

for operating systems that support multi-processor mode. AutoletstheBIOSautomaticallycongurethis

setting.(Default:Auto)

&ExtremeMemoryProle(X.M.P.)(Note 2)

 AllowstheBIOStoreadtheSPDdataonXMPmemorymodule(s)toenhancememoryperformancewhen

enabled.

Disabled   Disablesthisfunction.(Default)

Prole1   UsesProle1settings.

Prole2(Note 2)  UsesProle2settings.

&System Memory Multiplier

Allows you to set the system memory multiplier. AutosetsmemorymultiplieraccordingtomemorySPD

data.(Default:Auto)

&Memory Frequency (MHz)

 Therstmemoryfrequencyvalueisthenormaloperatingfrequencyofthememorybeingused;thesecond

is the memory frequency that is automatically adjusted according to the System Memory Multiplier settings.

(Note 1) This item is present only when you install a CPU that supports this feature.

(Note 2) This item is present only when you install a CPU and a memory module that support this feature.

— 26 —

`Advanced Memory Settings

&

ExtremeMemoryProle(X.M.P.)

(Note)

, System Memory Multiplier , Memory

Frequency(Mhz)

The settings above are synchronous to those under the same items on the Advanced Frequency Settings

menu.

&Memory Timing Mode

Manualallowsthememorytimingsettingsbelowtobecongurable.Optionsare:Auto(default),Manual.

&ProleDDRVoltage

When using a non-XMP memory module or ExtremeMemoryProle(X.M.P.) is set to Disabled, the value

isdisplayedaccordingtoyourmemoryspecication.WhenExtremeMemoryProle(X.M.P.) is set to

Prole1 or Prole2,thevalueisdisplayedaccordingtotheSPDdataontheXMPmemory.

` Standard Timing Control, Advanced Timing Control, CAD Bus Setup Timing, CAD Bus

DriveStrength,DataBusConguration

Thesesectionsprovidememorytimingsettings.Therespectivetimingsettingscreensarecongurableonly

when Memory Timing Mode is set to Manual. Note: Your system may become unstable or fail to boot after

you make changes on the memory timings. If this occurs, please reset the board to default values by loading

optimizeddefaultsorclearingtheCMOSvalues.

`Advanced Voltage Settings

This sub-menu allows you to set CPU, chipset and memory voltages.

`PC Health Status

&Reset Case Open Status

Disabled  Keepsorclearstherecordofpreviouschassisintrusionstatus.(Default)

Enabled Clears the record of previous chassis intrusion status and the Case Openeldwill

show «No» at next boot.

&Case Open

 DisplaysthedetectionstatusofthechassisintrusiondetectiondeviceattachedtothemotherboardCI

header.Ifthesystemchassiscoverisremoved,thiseldwillshow«Yes»,otherwiseitwillshow»No».To

clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to

the CMOS, and then restart your system.

& CPU Vcore/CPU VDDP/DRAM Channel A/B Voltage/+3.3V/+5V/+12V/VCORE SOC

 Displaysthecurrentsystemvoltages.

`Miscellaneous Settings

&PCIeSlotConguration

Allows you to set the operation mode of the PCI Express slots to Gen 1, Gen 2, or Gen 3. Actual operation

modeissubjecttothehardwarespecicationofeachslot.AutoletstheBIOSautomaticallycongurethis

setting.(Default:Auto)

&3DMark01 Enhancement

 Allowsyoutodeterminewhethertoenhancesomelegacybenchmarkperformance.(Default:Disabled)

(Note) This item is present only when you install a CPU and a memory module that support this feature.

— 27 —

`Smart Fan 5 Settings

&Monitor

 Allowsyoutoselectatargettomonitorandtomakefurtheradjustment.(Default:CPUFAN)

&Fan Speed Control

Allows you to determine whether to enable the fan speed control function and adjust the fan speed.

Normal Allows the fan to run at different speeds according to the temperature. You can adjust

the fan speed with System Information Viewer based on your system requirements.

(Default)

Silent Allows the fan to run at slow speeds.

Manual Allows you to control the fan speed in the curve graph.

Full Speed Allows the fan to run at full speeds.

&Fan Control Use Temperature Input

Allows you to select the reference temperature for fan speed control.

&Temperature Interval

Allows you to select the temperature interval for fan speed change.

&FAN/Pump Control Mode

Auto Lets the BIOS automatically detect the type of fan/pump installed and sets the optimal

controlmode.(Default)

Voltage Voltage mode is recommended for a 3-pin fan/pump.

PWM PWM mode is recommended for a 4-pin fan/pump.

&FAN Stop

Enables or disables the fan/pump stop function. You can set the temperature limit using the temperature

curve.Thefanorpumpstopsoperationwhenthetemperatureislowerthanthelimit.(Default:Disabled)

&Temperature

 Displaysthecurrenttemperatureoftheselectedtargetarea.

&Fan Speed

 Displayscurrentfan/pumpspeeds.

&Flow Rate

 Displaystheowrateofyourwatercoolingsystem.

&Temperature Warning Control

Sets the warning threshold for temperature. When temperature exceeds the threshold, BIOS will emit

warningsound.Optionsare:Disabled(default),60oC/140oF, 70oC/158oF, 80oC/176oF, 90oC/194oF.

&Fan/Pump Fail Warning

Allows the system to emit warning sound if the fan/pump is not connected or fails. Check the fan/pump

conditionorfan/pumpconnectionwhenthisoccurs.(Default:Disabled)

— 28 —

2-4 System

This section provides information on your motherboard model and BIOS version. You can also select the default

language used by the BIOS and manually set the system time.

&System Language

Selects the default language used by the BIOS.

&System Date

 Setsthesystemdate.Thedateformatisweek(read-only),month,date,andyear.Use<Enter>toswitch

betweentheMonth,Date,andYeareldsandusethe<PageUp>or<PageDown>keytosetthedesired

value.

&System Time

Sets the system time. The time format is hour, minute, and second. For example, 1 p.m. is 13:00:00. Use

<Enter>toswitchbetweentheHour,Minute,andSecondeldsandusethe<PageUp>or<PageDown>

key to set the desired value.

&Access Level

 Displaysthecurrentaccessleveldependingonthetypeofpasswordprotectionused.(Ifnopasswordis

set, the default will display as Administrator.) The Administrator level allows you to make changes to all

BIOS settings; the User level only allows you to make changes to certain BIOS settings but not all.

— 29 —

2-5 BIOS

&Boot Option Priorities

 Speciestheoverallbootorderfromtheavailabledevices.RemovablestoragedevicesthatsupportGPT

formatwillbeprexedwith«UEFI:»stringonthebootdevicelist.Tobootfromanoperatingsystemthat

supportsGPTpartitioning,selectthedeviceprexedwith»UEFI:»string.

Or if you want to install an operating system that supports GPT partitioning such as Windows 10 64-bit,

selecttheopticaldrivethatcontainstheWindows1064-bitinstallationdiskandisprexedwith«UEFI:»

string.

&Hard Drive/CD/DVD ROM Drive/Floppy Drive/Network Device BBS Priorities

 Speciesthebootorderforaspecicdevicetype,suchasharddrives,opticaldrives,oppydiskdrives,

anddevicesthatsupportBootfromLANfunction,etc.Press<Enter>onthisitemtoenterthesubmenuthat

presents the devices of the same type that are connected. This item is present only if at least one device

for this type is installed.

&Bootup NumLock State

 EnablesordisablesNumlockfeatureonthenumerickeypadofthekeyboardafterthePOST.(Default:On)

&Security Option

 Specieswhetherapasswordisrequiredeverytimethesystemboots,oronlywhenyouenterBIOSSetup.

Afterconguringthisitem,setthepassword(s)undertheAdministrator Password/User Password item.

Setup A password is only required for entering the BIOS Setup program.

System A password is required for booting the system and for entering the BIOS Setup

program.(Default)

&Full Screen LOGO Show

Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled skips the

GIGABYTELogowhenthesystemstartsup.(Default:Enabled)

&Fast Boot

Enables or disables Fast Boot to shorten the OS boot process. Ultra Fast provides the fastest bootup

speed.(Default:Disabled)

&SATA Support

AllSataDevices AllSATAdevicesarefunctionalintheoperatingsystemandduringthePOST.

LastBootHDDOnly Exceptforthepreviousbootdrive,allSATAdevicesaredisabledbeforetheOS

bootprocesscompletes.(Default)

 ThisitemiscongurableonlywhenFast Boot is set to Enabled or Ultra Fast.

— 30 —

&VGA Support

Allows you to select which type of operating system to boot.

Auto Enables legacy option ROM only.

EFI Driver Enables EFI option ROM. (Default)

 ThisitemiscongurableonlywhenFast Boot is set to Enabled or Ultra Fast.

&USB Support

Disabled All USB devices are disabled before the OS boot process completes.

Full Initial All USB devices are functional in the operating system and during the POST.

(Default)

Partial Initial Part of the USB devices are disabled before the OS boot process completes.

 ThisitemiscongurableonlywhenFast Boot is set to Enabled. This function is disabled when Fast Boot

is set to Ultra Fast.

&PS2 Devices Support

Disabled All PS/2 devices are disabled before the OS boot process completes.

Enabled All PS/2 devices are functional in the operating system and during the POST.

(Default)

 ThisitemiscongurableonlywhenFast Boot is set to Enabled. This function is disabled when Fast Boot

is set to Ultra Fast.

&NetWork Stack Driver Support

Disabled Disables booting from the network. (Default)

Enabled Enables booting from the network.

 ThisitemiscongurableonlywhenFast Boot is set to Enabled or Ultra Fast.

&CSM Support

Enables or disables UEFI CSM (Compatibility Support Module) to support a legacy PC boot process.

Enabled Enables UEFI CSM. (Default)

Disabled Disables UEFI CSM and supports UEFI BIOS boot process only.

&LAN PXE Boot Option ROM

Allows you to select whether to enable the legacy option ROM for the LAN controller. (Default: Disabled)

 ThisitemiscongurableonlywhenCSM Support is set to Enabled.

&Storage Boot Option Control

Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller.

Disabled Disables option ROM.

UEFI Only Enables UEFI option ROM only.

Legacy Only Enables legacy option ROM only. (Default)

 ThisitemiscongurableonlywhenCSM Support is set to Enabled.

&Other PCI Device ROM Priority

Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other

than the LAN, storage device, and graphics controllers.

Disabled Disables option ROM.

UEFI Only Enables UEFI option ROM only. (Default)

Legacy Only Enables legacy option ROM only.

 ThisitemiscongurableonlywhenCSM Support is set to Enabled.

&Network Stack

Disables or enables booting from the network to install a GPT format OS, such as installing the OS from

the Windows Deployment Services server. (Default: Disabled)

&Ipv4 PXE Support

 EnablesordisablesIPv4PXESupport.ThisitemiscongurableonlywhenNetwork Stack is enabled.

— 31 —

&Ipv4 HTTP Support

 EnablesordisablesHTTPbootsupportforIPv4.ThisitemiscongurableonlywhenNetwork Stack is

enabled.

&Ipv6 PXE Support

 EnablesordisablesIPv6PXESupport.ThisitemiscongurableonlywhenNetwork Stack is enabled.

&Ipv6 HTTP Support

 EnablesordisablesHTTPbootsupportforIPv6.ThisitemiscongurableonlywhenNetwork Stack is

enabled.

&IPSECCerticate

 Enablesordisables Internet Protocol Security.Thisitemiscongurableonlywhen Network Stack is

enabled.

&Administrator Password

 Allowsyoutocongureanadministratorpassword.Press<Enter>onthisitem,typethepassword,and

thenpress<Enter>.Youwillberequestedtoconrmthepassword.Typethepasswordagainandpress

<Enter>.Youmustentertheadministratorpassword(oruserpassword)atsystemstartupandwhenentering

BIOSSetup.Differingfromtheuserpassword,theadministratorpasswordallowsyoutomakechangesto

all BIOS settings.

&User Password

 Allowsyoutocongureauserpassword.Press<Enter>onthisitem,typethepassword,andthenpress

<Enter>.Youwillberequestedtoconrmthepassword.Typethepasswordagainandpress<Enter>.

You must enter the administrator password (or user password) at system startup and when entering BIOS

Setup. However, the user password only allows you to make changes to certain BIOS settings but not all.

 Tocancelthepassword,press<Enter>onthepassworditemandwhenrequestedforthepassword,enter

thecorrectonerst.Whenpromptedforanewpassword,press<Enter>withoutenteringanypassword.

Press<Enter>againwhenpromptedtoconrm.

 NOTE:BeforesettingtheUserPassword,besuretosettheAdministratorPasswordrst.

— 32 —

2-6 Peripherals

&AMD CPU fTPM

Enables or disables the TPM 2.0 function integrated in the AMD CPU. (Default: Disabled)

&Initial Display Output

 SpeciestherstinitiationofthemonitordisplayfromtheinstalledPCIExpressgraphicscardortheonboard

graphics.

IGDVideo(Note) Setstheonboardgraphicsastherstdisplay.

PCIe1Slot SetsthegraphicscardonthePCIEX16slotastherstdisplay.(Default)

PCIe2Slot SetsthegraphicscardonthePCIEX4slotastherstdisplay.

PCIe3Slot  SetsthegraphicscardonthePCIEX1_2slotastherstdisplay.

&Legacy USB Support

 AllowsUSBkeyboard/mousetobeusedinMS-DOS.(Default:Enabled)

&XHCI Hand-off

 Determineswhether toenable XHCI Hand-offfeature for anoperating systemwithout XHCI Hand-off

support. (Default: Enabled)

&EHCI Hand-off

 Determineswhether toenable EHCI Hand-offfeature for anoperating systemwithout EHCI Hand-off

support. (Default: Disabled)

&Port 60/64 Emulation

 EnablesordisablesemulationofI/Oports64hand60h.Thisshouldbeenabledforfulllegacysupport

forUSBkeyboards/miceinMS-DOSorinoperatingsystemthatdoesnotnativelysupportUSBdevices.

(Default: Disabled)

&USB Mass Storage Driver Support

 EnablesordisablessupportforUSBstoragedevices.(Default:Enabled)

&Mass Storage Devices

 DisplaysalistofconnectedUSBmassstoragedevices.ThisitemappearsonlywhenaUSBstoragedevice

is installed.

(Note) ThisitemispresentonlywhenyouinstallaCPUthatsupportsthisfeature.

-33-

&RGB Fusion

 AllowsyoutosettheLEDlightingmodeforthemotherboard.

Off   Disablesthisfunction.

PulseMode AllLEDssimultaneouslyfadeinandfadeout.

ColorCycle AllLEDssimultaneouslycyclethroughafullspectrumofcolors.

StaticMode AllLEDsemitasinglecolor.(Default)

FlashMode AllLEDssimultaneouslyashonandoff.

DoubleFlash AllLEDsashinaninterlacedpattern.

&LEDs in Sleep, Hibernation, and Soft Off States

 AllowsyoutosetthelightingmodeofthemotherboardLEDsinsystemS3/S4/S5state.

 Thisfeatureissupportedonlywitha5VdigitalLEDstrip.

Off   DisablestheselectedlightingmodewhenthesystementersS3/S4/S5state.(Default)

On Enables the selected lighting mode when the system enters S3/S4/S5 state.

&HD Audio Controller

 Enablesordisablestheonboardaudiofunction.(Default:Enabled)

If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to

Disabled.

&Above 4G Decoding

Enables or disables 64-bit capable devices to be decoded in above 4 GB address space (only if your system

supports 64-bit PCI decoding). Set to Enabled if more than one advanced graphics card are installed and

their drivers are not able to be launched when entering the operating system (because of the limited 4 GB

memoryaddressspace).(Default:Disabled)

`Trusted Computing

Enables or disables Trusted Platform Module (TPM).

`AMD CBS

 Thissub-menuprovidesAMDCBS-relatedcongurationoptions.

`Intel(R) Gigabit Network Connection

 Thissub-menuprovidesinformationonLANcongurationandrelatedcongurationoptions.

— 34 —

&IOMMU

 EnablesordisablesAMDIOMMUsupport.(Default:Auto)

&Integrated Graphics (Note)

Enables or disables the onboard graphics function.

Auto The BIOS will automatically enable or disable the onboard graphics depending on the

graphicscardbeinginstalled.(Default)

Forces Enables the onboard graphics.

Disabled  Disablestheonboardgraphics.

&UMA Mode (Note)

Specify the UMA mode.

Auto LetstheBIOSautomaticallycongurethissetting. (Default)

UMASpecied SetstheUMAFrameBufferSize.

UMA Auto Sets the display resolution.

 ThisitemiscongurableonlywhenIntegrated Graphics is set to Forces.

&UMA Frame Buffer Size (Note)

Framebuffersizeisthetotalamountofsystemmemoryallocatedsolelyfortheonboardgraphicscontroller.

MS-DOS,forexample,willuseonlythismemoryfordisplay.Optionsare:Auto(default),64M~16G.

 ThisitemiscongurableonlywhenUMA Mode is set to UMASpecied.

&Display Resolution (Note)

Allows you to set the display resolution. Options are: Auto (default), 1920×1080 and below, 2560×1600,

3840×2160.

 ThisitemiscongurableonlywhenUMA Mode is set to UMA Auto.

2-7 Chipset

(Note) This item is present only when you install a CPU that supports this feature.

— 35 —

&SATA Mode

 EnablesordisablesRAIDfortheintegratedSATAcontrollersorcongurestheSATAcontrollerstoAHCI

mode.

RAID   EnablesRAIDfortheSATAcontroller.

AHCI   CongurestheSATAcontrollerstoAHCImode.AdvancedHostControllerInterface

(AHCI)isaninterfacespecicationthatallowsthestoragedrivertoenableadvanced

SerialATAfeaturessuchasNativeCommandQueuingandhotplug.(Default)

&NVMe RAID mode (M2A_SOCKET and M2B_SOCKET Connectors)

 AllowsyoutodeterminewhethertouseyourM.2NVMePCIeSSDstocongureRAID.(Default:Disabled)

&Chipset SATA Port Enable

 EnablesordisablestheintegratedSATAcontroller(s).(Default:Enabled)

&APU SATA Port 0/1 (ASATA3 0, 1 Connectors)

 DisplaystheinformationoftheconnectedSATAdevice(s).

&Chipset SATA Port 0/1/2/3 (SATA3 0, 1, 2, 3 Connectors)

 DisplaystheinformationoftheconnectedSATAdevice(s).

— 36 —

&AC BACK

 DeterminesthestateofthesystemafterthereturnofpowerfromanACpowerloss.

Memory The system returns to its last known awake state upon the return of the AC power.

Always On The system is turned on upon the return of the AC power.

AlwaysOff  ThesystemstaysoffuponthereturnoftheACpower.(Default)

&ErP

 DetermineswhethertoletthesystemconsumeleastpowerinS5(shutdown)state.Note:Whenthisitem

is set to Enabled, the following functions will become unavailable: Resume by Alarm, PME event wake

up, power on by mouse, power on by keyboard, and wake on LAN.

&Soft-Off by PWR-BTTN

 ConguresthewaytoturnoffthecomputerinMS-DOSmodeusingthepowerbutton.

Instant-Off  Pressthepowerbuttonandthenthesystemwillbeturnedoffinstantly.(Default)

Delay4Sec. Pressandholdthepowerbuttonfor4secondstoturnoffthesystem.Ifthepower

button is pressed for less than 4 seconds, the system will enter suspend mode.

&Power Loading

Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing

it to shutdown or fail. If this occurs, please set to Enabled. AutoletstheBIOSautomaticallycongurethis

setting.(Default:Auto)

&Resume by Alarm

 Determineswhethertopoweronthesystematadesiredtime.(Default:Disabled)

If enabled, set the date and time as following:

Wakeupday:Turnonthesystemataspecictimeoneachdayoronaspecicdayinamonth.

Wake up hour/minute/second: Set the time at which the system will be powered on automatically.

Note: When using this function, avoid inadequate shutdown from the operating system or removal of the

AC power, or the settings may not be effective.

&Wake on LAN

 EnablesordisablesthewakeonLANfunction.(Default:Enabled)

2-8 Power

— 37 —