Hikvision ds 2cd2043g0 i инструкция

0

Network Bullet Camera

Quick Start Guide

Network Bullet CameraQuick Start Guide

1

Quick Start Guide

2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights

reserved.

This Manual is the property of Hangzhou Hikvision Digital Technology

Co., Ltd. or its affiliates (hereinafter referred to as «Hikvision»), and it

cannot be reproduced, changed, translated, or distributed, partially

or wholly, by any means, without the prior written permission of

Hikvision. Unless otherwise expressly stated herein, Hikvision does

not make any warranties, guarantees or representations, express or

implied, regarding to the Manual, any information contained herein.

About this Manual

The Manual includes instructions for using and managing the

Product. Pictures, charts, images and all other information

hereinafter are for description and explanation only. The information

contained in the Manual is subject to change, without notice, due to

firmware updates or other reasons. Please find the latest version of

this Manual at the Hikvision website (http://www.hikvision.com/).

Please use this Manual with the guidance and assistance of

professionals trained in supporting the Product.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are

the properties of Hikvision in various jurisdictions.

Other trademarks and logos mentioned are the properties of

their respective owners.

LEGAL DISCLAIMER

Network Bullet CameraQuick Start Guide

2

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS

MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE,

SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL

FAULTS AND ERRORS. HIKVISION MAKES NO WARRANTIES, EXPRESS

OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,

SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE.

THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO

EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL,

CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING,

AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,

BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF

SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON

BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT

LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE

PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY

OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR

INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY

RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR

OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,

VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,

HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL

APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR

ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.

ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A

MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD

PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY,

Network Bullet CameraQuick Start Guide

3

INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER

PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY

PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR

PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE

DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL

WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY

NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN

SUPPORT OF HUMAN RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE

APPLICABLE LAW, THE LATER PREVAILS.

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly

approved by the party responsible for compliance could void the

users authority to operate the equipment.

FCC compliance: This equipment has been tested and found to

comply with the limits for a Class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

Network Bullet CameraQuick Start Guide

4

encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

EU Conformity Statement

This product and — if applicable — the supplied

accessories too are marked with «CE» and comply

therefore with the applicable harmonized European

standards listed under the EMC Directive 2014/30/EU, the RoHS

Directive 2011/65/EU

2012/19/EU (WEEE directive): Products marked with

this symbol cannot be disposed of as unsorted

municipal waste in the European Union. For proper

recycling, return this product to your local supplier

upon the purchase of equivalent new equipment, or dispose of it at

designated collection points. For more information, see:

www.recyclethis.info.

Network Bullet CameraQuick Start Guide

5

2006/66/EC (battery directive): This product contains

a battery that cannot be disposed of as unsorted

municipal waste in the European Union. See the

product documentation for specific battery

information. The battery is marked with this symbol,

which may include lettering to indicate cadmium (Cd), lead (Pb), or

mercury (Hg). For proper recycling, return the battery to your supplier

or to a designated collection point. For more information, see:

www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards

requirements.

Safety Instruction

These instructions are intended to ensure that user can use the

product correctly to avoid danger or property loss.

The precaution measure is divided into Warnings and Cautions

Warnings: Serious injury or death may occur if any of the warnings

are neglected. Cautions: Injury or equipment damage may occur if any of the

cautions are neglected.

Network Bullet CameraQuick Start Guide

6

Warnings

Proper configuration of all passwords and other security settings

is the responsibility of the installer and/or end-user.

In the use of the product, you must be in strict compliance with

the electrical safety regulations of the nation and region. Please

refer to technical specifications for detailed information.

The power source should meet limited power source or PS2

requirements according to IEC 60950-1 or IEC 62368-1 standard.

Do not connect several devices to one power adapter as adapter

overload may cause over-heating or a fire hazard.

Please make sure that the plug is firmly connected to the power

socket. When the product is mounted on wall or ceiling, the

device shall be firmly fixed.

If smoke, odor or noise rise from the device, turn off the power

at once and unplug the power cable, and then please contact

the service center.

Warnings Cautions

Warnings Follow these

safeguards to prevent

serious injury or death.

Cautions Follow these

precautions to prevent

potential injury or material

damage.

Network Bullet CameraQuick Start Guide

7

Cautions CAUTION: Hot parts! Burned fingers when handling the parts.

Wait one-half hour after switching off

before handling parts. This sticker is to

indicate that the marked item can be hot

and should not be touched without taking care. For device with

this sticker, this device is intended for installation in a restricted

access location, access can only be gained by service persons or

by users who have been instructed about the reasons for the

restrictions applied to the location and about any precautions

that shall be taken.

Make sure the power supply voltage is correct before using the

camera.

Do not drop the camera or subject it to physical shock.

Do not touch sensor modules with fingers. If cleaning is

necessary, use clean cloth with a bit of ethanol and wipe it

gently. If the camera will not be used for an extended period,

please replace the lens cap to protect the sensor from dirt.

Do not aim the camera at the sun or extra bright places.

Blooming or smearing may occur otherwise (which is not a

malfunction), and affect the endurance of sensor at the same

time.

The sensor may be burned out by a laser beam, so when any

laser equipment is in using, make sure that the surface of sensor

will not be exposed to the laser beam.

Network Bullet CameraQuick Start Guide

8

Do not place the camera in extremely hot, cold (the operating

temperature shall be -30C to 60C, or -40C to 60C if the

camera model has an H in its suffix), dusty or damp locations,

and do not expose it to high electromagnetic radiation.

To avoid heat accumulation, good ventilation is required for

operating environment.

Keep the camera away from liquid while in use.

While in delivery, the camera shall be packed in its original

packing, or packing of the same texture.

Regular part replacement: a few parts (e.g. electrolytic

capacitor) of the equipment shall be replaced regularly

according to their average enduring time. The average time

varies because of differences between operating environment

and using history, so regular checking is recommended for all the

users. Please contact with your dealer for more details.

This equipment is not suitable for use in locations where

children are likely to be present.

CAUTION: Risk of explosion if the battery is replaced by an

incorrect type. Dispose of used batteries according to the

instructions

ATTENTION: IL Y A RISQUE D’EXPLOSION SI LA BATTERIE EST

REMPLACE PAR UNE BATTERIE DE TYPE INCORRECT. METTRE

AU REBUT LES BATTERIES USAGES CONFORMMENT AUX

INSTRUCTIONS

Improper replacement of the battery with an incorrect type may

defeat a safeguard (for example, in the case of some lithium

battery types).

Network Bullet CameraQuick Start Guide

9

Do not dispose of the battery into fire or a hot oven, or

mechanically crush or cut the battery, which may result in an

explosion.

Do not leave the battery in an extremely high temperature

surrounding environment, which may result in an explosion or

the leakage of flammable liquid or gas.

Do not subject the battery to extremely low air pressure, which

may result in an explosion or the leakage of flammable liquid or

gas.

If the product does not work properly, please contact your

dealer or the nearest service center. Never attempt to

disassemble the camera yourself. (We shall not assume any

responsibility for problems caused by unauthorized repair or

maintenance.)

Network Bullet CameraQuick Start Guide

10

Table of Contents Appearance Description ……………………………………………………… 11

Type I …………………………………………………………………. 11 Type II ………………………………………………………………… 13

Resetting the Camera ………………………………….. 14 Setting the WPS Protocol……………………………… 15

Type III ……………………………………………………………….. 17 2 Installation ………………………………………………………………………… 19

Installation of Memory Card ………………………………….. 20 Installation of Camera …………………………………………… 21 Waterproof Measures …………………………………………… 23

2.3.1 Install Network Cable Waterproof Jacket ………… 23 2.3.2 Waterproof Other Cables …………………………….. 24

3 Activate and Access Network Camera …………………………………… 25

Network Bullet CameraQuick Start Guide

11

Appearance Description

Type I

1

2

3

4

5

6

9

7

8

Type I Bullet Camera

Network Bullet CameraQuick Start Guide

12

Description

No. Description No. Description

1 Mounting Base 4 Lens

2 Back Case 5 Sun Shield

3 Front Case 6 Power Cable

7 Reset Button 8 GND Screw

9 10/100M Self-adaptive

Ethernet Interface

Note:

Type I camera does not support the function of Wi-Fi or memory

card.

Press Reset button about 10s when the camera is power on or

rebooting to restore the default settings, including the user name,

password, IP address, port No., etc.

Network Bullet CameraQuick Start Guide

13

Type II

1

2

4

3

5

6

7

9

8

10

11

Type II Bullet Camera

Network Bullet CameraQuick Start Guide

14

Description

No. Description No. Description

1 Mounting Base 7 Memory Card Slot

2 Back Case 8 Power Supply Interface

3 Sun Shield 9 10/100M Self-adaptive

Ethernet Interface

4 Lens 10 PoE Cable

5 Adjusting Nut 11 GND Screw

6 WPS/RESET Button

Note:

This type of bullet camera supports PoE power supply. You can

power the camera by connecting both DC 12V interface and the

Ethernet interface. Or you can connect the Ethernet interface only.

WPS/RESET Button

WPS function and Reset function share the same button. The

button works as a reset button only when you press it when the

camera is powered on.

Resetting the Camera

Press WPS/RESET button about 10s when the camera is power on or

rebooting to restore the default settings, including the user name,

password, IP address, port No., etc.

Network Bullet CameraQuick Start Guide

15

WPS/RESET

WPS/RESET Button

Setting the WPS Protocol

A wireless router with the WPS function is required to enable the

WPS function of the camera.

Steps:

1. Enable the WPS function of your router. Refer to the operation

guide of your router for detailed procedures.

2. Press the WPS/RESET button (about 2s) on the camera to join in

the wireless network.

Network Bullet CameraQuick Start Guide

16

WPS/RESET

WPS/RESET Button

Note:

You can also press the WPS button on the camera first and then

enable the WPS function on the router to establish the

connection. But the WPS function of the router must be turned

on within 120s right after pressing the WPS/RESET button on the

camera.

Network Bullet CameraQuick Start Guide

17

Type III

1 3

2 4

5

7

6

8

9

10

Type III Bullet Camera

Network Bullet CameraQuick Start Guide

18

Description

No. Description No. Description

1 Mounting Base 6 Grounding Screw

2 Back Case 7 10/100M Self-adaptive

Ethernet Interface (PoE)

3 Front Case 8 Power Supply (DC 12V)

4 Lens 9 Memory Card Slot

5 Sun Shield 10 Reset Button

Note:

This type of bullet camera supports PoE power supply. You can

power the camera by connecting both DC 12V interface and the

Ethernet interface. Or you can connect the Ethernet interface only.

Press and hold the reset button about 10s when the camera is

powering on or rebooting to restore the default settings, including

the user name, password, IP address, port No., etc.

Network Bullet CameraQuick Start Guide

19

2 Installation

Before you start:

Make sure the device in the package is in good condition and all

the assembly parts are included.

The standard power supply is 12 VDC or PoE. Please make sure

your power supply matches with your camera.

Make sure all the related equipment is power-off during the

installation.

Check the specification of the products for the installation

environment.

Make sure that the wall is strong enough to withstand four times

the weight of the camera and the bracket.

For the camera that supports IR, you are required to pay attention to

the following precautions to prevent IR reflection:

Dust or grease on the dome cover will cause IR reflection. Please

do not remove the dome cover film until the installation is

finished. If there is dust or grease on the dome cover, clean the

dome cover with clean soft cloth and isopropyl alcohol.

Make sure that there is no reflective surface too close to the

camera lens. The IR light from the camera may reflect back into

the lens causing reflection.

The foam ring around the lens must be seated flush against the

inner surface of the bubble to isolate the lens from the IR LEDS.

Fasten the dome cover to camera body so that the foam ring and

the dome cover are attached seamlessly.

Network Bullet CameraQuick Start Guide

20

Installation of Memory Card

Type II and Type III camera support memory card function. Follow the

steps to mount and unmount a memory card.

Steps:

1. Unscrew the cover on back case to expose memory card slot.

Cover

Unscrew the Cover

2. Insert the memory card into the memory card slot.

Memory Card Slot

Type II

Memory Card Slot

Type III

Insert Memory Card

Network Bullet CameraQuick Start Guide

21

3. (Optional)To unmount the memory card, push to get it ejected.

4. Screw the cover back to the camera.

Installation of Camera

Note:

Both wall mounting and ceiling mounting are suitable for the bullet

camera. Wall mounting will be taken as an example in this section.

You can take steps of wall mounting for reference if ceiling mounting

is adopted.

Steps:

1. Drill the screw holes in the wall according to the drill template.

Ceiling Mounting

Hole

Hole

Hole

Drill Template

Network Bullet CameraQuick Start Guide

22

2. Route the corresponding cables.

3. Secure the camera to the wall with the supplied Screws.

Secure the Camera to the Ceiling

4. Connect the cables and power on the camera to view live view

image.

5. Adjust the viewing angle.

Tilt: 0 to 90

Adjusting Nut

Pan: 0 to 360

Rotate: 0 to 360

3-axis Adjustment

Network Bullet CameraQuick Start Guide

23

1). Loosen the adjusting nut.

2). Adjust the pan direction [0 to 360].

3). Adjust the tilt direction [0 to 90].

4). Rotate the camera [0 to 360] to adjust the lens to the desired

viewing angle.

5). Tighten the adjusting nut to complete the installation.

Waterproof Measures

If the camera is installed outdoor, you should use the waterproof

accessory or tapes to waterproof the cables. Otherwise the cables

might get wet or a short circuit occurs.

2.3.1 Install Network Cable Waterproof Jacket

Align

Figure 2-6 Install Waterproof Jacket

Steps:

1. Feed the network cable through and in order.

Network Bullet CameraQuick Start Guide

24

2. Fix on the network cable between and .

3. Place onto the end of , and plug the RJ45 male connector

into RJ45 female connector.

4. Screw to clockwise.

5. Push into .

6. Secure with the in clockwise direction.

2.3.2 Waterproof Other Cables

After routing and connecting the cables, use the waterproof tapes to

wrap up the cables. Connected cables and spare cables both should

be wrapped up as the figures below.

Waterproof Cables