Инструкция inter m rm 05a

Types of Manuals:

The main types of Inter-m RM-05A instructions:

• User guide — rules of useing and characteristics
• Service manual — repair, diagnostics, maintenance
• Operation manual — description of the main functions of equipment

Amplifier User Guides by Inter-m:

Similar to Inter-m RM-05A Manuals, User Guides and Instructions:

Артикул: 00000003900

Назначение:
Микрофон используется в системах трансляции, оповещения и громкой голосовой связи.

Особенности:
Селектор… подробнее

в закладки
сравнить

REMOTE AMP WITH ZONE SELECTOR

Welcomel

A personal welcome to you from the management and employees of Inter-M

All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products.

We sincerely trust this product will provide years of satisfactory service, but if anything is not to your complete satisfaction, we will endeavor to make things right.

Welcome to Inter-M, and thank you for becoming part of our worldwide extended family!

*Do not install this equipment in a confined space such as a book case or similar unit.

*The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such vases, shall be placed on the apparatus. *Worded: “WARNING FOR YOUR PROTECTION PLEASE READ THE FOLLOWING-WATER AND MOISTURE: Unit should not be used near water(e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken so than objects do not fall and liquids are not spilled into the enclosure through openings.”

Service Instructions

*Worded: «Caution: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.»

*Location: Instruction Manual.

NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

* It can be heated up if you use this product in closed box or ill-ventilated place.

REMOTE AMP WITH ZONE SELECTOR

InstallationI t ll ti

Environment

Never place this product in an environment which could alter its performance or reduce its service life. Such environments usually include high levels of heat, dust, moisture, and vibration.

IMPORTANT SAFETY INSTRUCTIONS

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped. S3125A

S3125A

REMOTE AMP WITH ZONE SELECTOR

Features

— SPEAKER LINE CONTROL

Speaker zone of PAM-240A/360A, PCT-610/620 can be controlled by RM-05A.

— CHIME AND TALK FUNCTION

There are 4 levels of chime in PAM-240A/360A, PCT-610/620 which can be triggered by Chime/Talk Switch, and after chime is finished, announcement from mic will be made while pushing switch button.

— OUTPUT LEVEL METER

10 segments LED display on the front panel indicates signal output level of RM-05A at real time.

— MIC BROADCASTING

Highly sensitive condenser type Mic is used for clear broadcasting.

— EXCLUSIVE USE FOR PAM-240A/360A, PCT-610/620

RM-05A is the dedicated remote control amplifier for PAM series, so it only can be used with PAM240A/360A, PCT-610/620.

— MUTE FUNCTION FOR CHIME OUT

Chime melody can be muted by simple operation.

Operatingi Procedure

1.Ensure the Power Switch is selected to the on position.

2.Select which channel or combination of channels you wish to address by selecting the required CH1-CH5 buttons.

3.To address all the channels select the all button.

4.The CH1-CH5 and All buttons are latching type, when selected a LED lights to show the selection you have made.

5.When you are ready to make your address, press the Talk Switch and speak into the microphone.

6.Pressing the Talk Switch will also activate the Pre Announcement Chime facility (for set up details see instructions later in this manual)

7.The microphone output level can be adjusted using the level control located next to the gooseneck microphone connector.

8.After completion of the address the selected CH1-CH5 or All buttons must be deselected clearing the microphone ready for the next selection.