Инструкция к швейной машинке husqvarna viking

1. Manuals
2. Brands
3. Husqvarna Viking Manuals
4. Sewing Machine
5. H Class E10
6. User manual

H class

• Page 1
  USER’S GUIDE…

• Page 2: Important Safety Instructions

  This household sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594 IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should always be followed, including the following: Read all instructions before using this household sewing machine. DANGER — To reduce the risk of electric shock: •…

• Page 3
  Congratulations! on all types of fabrics, from multiple layers of denim to delicate silks. Your sewing machine offers the ultimate in simplicity and ease of operation. For your safety and to fully enjoy the many advantages and ease of operation of your sewing machine, we recommend that you read all the important safeguards and use and care instructions in this instruction book.
• Page 4
  LIST OF CONTENTS …………….5 ……………………7 …………….8 …………9 Foot control………………………9 ……………………..9 ………………….10 ….11 …………12 …………………13 ………………..14 ………………..15 THREADING THE UPPER THREAD ……………..16 ………………17 ………..18 …….19 ……………20 …………………21 ………………….22 ………………23 ……………………25 …………………..26 …………………..27 ………………….28 MAINTENANCE …………………….29 ………………30…
• Page 5
  PRINCIPAL PARTS OF THE MACHINE Thread tension dial Presser foot pressure Thread take-up lever Thread cutting Presser foot Needle plate Accessories box 12. Reverse sewing lever…
• Page 6
  13. Spool pin 14. Bobbin winder 15. Hole for second spool pin 16. Hand wheel 17. Stitch selector dial 18. Power switch 19. Main plug socket 20. Bobbin thread guide 21. Upper thread guide 22. Handle 23. Presser foot lever…
• Page 7
  ACCESSORIES All purpose foot Zipper foot 13. Darning plate 14. Felt pad L-screwdriver 10. Pack of needles…
• Page 8
  (1) To open, lift up at the point of the arrow. (2) Note: Your H|CLASS™ E10 sewing machine is adjusted to provide the best stitch result at normal room temperature. Extreme hot and cold temperatures can affect…

• Page 9: Connecting The Machine To Power Source

  CONNECTING THE MACHINE TO POWER SOURCE Connect the machine to a power source as illustrated. A polarized plug must be used with the appropriate polarized outlet. (2) Attention: Unplug power cord when machine is not in use. Foot control Foot control regulates the sewing speed.

• Page 10: Changing The Bulb

  CHANGING THE BULB Attention:Disconnect the machine from the power supply by removing the plug from the main socket! Replace bulb with same type rated 10 watts Loosen screw (A) as illustrated. (1) Replace the cover and tighten screw. dealer for advice.

• Page 11
  TWO-STEP PRESSER FOOT LEVER When sewing several layers or thick fabrics, the presser foot can be raised to extra high for easy positioning of the work. (A) ADJUST PRESSER FOOT PRESSURE The presser foot pressure of the machine Loosen Tighten presser readjustment for most fabrics (light-or-heavy adjusting screw weight).
• Page 12
  ATTACHING THE PRESSER FOOT SHANK/ ANKLE Attaching the presser foot holder Raise the presser foot bar (a). (1) Attach the presser foot shank/ankle (b) as illustrated. Attaching the presser foot Lower the presser foot shank/ankle (b) until the cut-out (c) is directly above the pin on the foot (d).

• Page 13: Winding The Bobbin

  WINDING THE BOBBIN Place thread and spool holder onto spool pin (1). For smaller spools of thread place spool holder with small side next to spool (2). Wind thread clockwise around bobbin winder tension discs (3). Thread bobbin as illustrated and place on spindle (4).

• Page 14: Inserting The Bobbin

  INSERTING THE BOBBIN When inserting or removing the bobbin, the foot and needle must be fully raised. Hold the bobbin case with one hand. Insert the bobbin so that the thread runs in a clockwise direction (arrow). Put the thread under the tension spring.

• Page 15: Inserting The Needle

  INSERTING THE NEEDLE Change the needle regularly, especially if it is showing signs of wear and causing problems. Insert the needle following the illustrated instructions. A. Loosen the needle clamp screw and tighten again after inserting the new needle. (1) should be towards the back.

• Page 16: Threading The Upper Thread

  THREADING THE UPPER THREAD Threading is simple but it is important to thread correctly to prevent sewing problems could result. needle to its highest point (1), and also raise the presser foot to release the tension discs. (2) Attention: For safety, it is strongly suggested you turn off the power before threading.

• Page 17
  BUILT-IN NEEDLE THREADER The needle must be in the up position to use the built-in needle threader. We also recommend lowering the presser foot. 1a. Use the handle to pull the needle threader down, catching the thread under the guide. 1b.
• Page 18
  THREAD TENSION / BRINGING UP THE BOBBIN THREAD To increase the tension, turn the dial to the next number up. To reduce the tension, turn the dial to the next number down. A. Normal thread tension — upper and bobbin thread join in fabric fabric C.

• Page 19: Reverse Sewing

  REVERSE SEWING At the end of a seam, press down the Release the lever and the machine will sew forwards again. (1/A) REMOVING THE FABRIC Turn the handwheel toward you to bring the thread take up lever to its highest position, raise the presser foot and remove fabric to the back.

• Page 20
  MATCHING NEEDLE / FABRIC / THREAD NEEDLE, FABRIC, THREAD SELECTION GUIDE THREAD 9-11(65-75) Lightweight fabrics-thin cottons, voile, Light-duty thread in cotton, nylon or silk , muslin, interlocks, cotton knits, polyester. tricots, jerseys, crepes, woven polyester, shirt & blouse fabrics. 12(80) Medium weight fabrics-cotton, satin, Most threads sold are medium size and kettlecloth, sailcloth, double knits,…

• Page 21: Straight Stitching

  STRAIGHT STITCHING Straight stitching center needle position appears in the stitch display window. Adjust the stitch length by turning the stitch length dial to the desired stitch length. 2.5 is standard stitch length. selection dial To get the reinforced triple straight stitch, Reverse sewing lever Straight stitching right needle position…

• Page 22: Zigzag Stitching

  ZIGZAG STITCHING Turn the stitch selector dial so that the stitch stitch selector dial will increase or decrease the zig zag width. Function of stitch length dial while zigzaging The density of zigzag stitches increase as the setting of stitch length dial approaches less.

• Page 23: How To Sew Buttonholes

  HOW TO SEW BUTTONHOLES Preparation dial. The density of the stitch depends on thickness of the fabric. Note: Always test sew a buttonhole. To prepare the fabric Measure the diameter of the button and have a very thick button, add more to the diameter measurement.

• Page 24
  Tips produce a satin stitch on top. stretchy fabrics. It is best to sew a cord for a buttonhole on a stretch or knit fabrics. The buttonhole colomns should sew over the cord. (5)

• Page 25: Blind Hem

  BLIND HEM For hems, curtains, trousers, skirts, etc. fabrics. fabrics. Note: It takes practice to sew blind hems. Fold the fabric as illustrated with the wrong side up. (2) Place the fabric under the foot. Turn the handwheel forwards by hand until Wrong side Right side the needle swings fully to the left.

• Page 26: Zippers And Piping

  ZIPPERS AND PIPING The zipper foot can be snapped onto the right or left, depending on which side of the foot you are going to place against the zipper or piping. (2) To sew past the zipper pull, lower the needle into the fabric, raise the presser foot and push the zipper pull behind the presser foot.

• Page 27
  3-STEP ZIG-ZAG Patching: Place the patch in position and stitch around edges. The stitch length can be shortened to produce very close stitches. (A) When mending tears, it is advisable to use a piece of backing fabric to reinforce. The stitch density can be varied by adjusting the stitch length.

• Page 28: Stitch Selection

  STITCH SELECTION Triple straight stitch: (1) For reinforced seams. The machine sews two stitches forwards and one stitch backwards. This gives triple reinforcement. Triple zig-zag: (2) For hardwearing seams, hems and decorative seams. fabrics like denim, corduroy, etc.

• Page 29
  MAINTENANCE Attention: Disconnect the machine from the electricity supply by removing the plug from the main socket. When cleaning the machine, it must always be disconnected from the electricity supply. Remove the stitch plate Turn the handwheel until the needle cover and unscrew the needle plate screw withe the screw driver.(1) Cleaning the feed dog…

• Page 30: Trouble Shooting Guide

  TROUBLE SHOOTING GUIDE Problem Cause Correction Upper thread 1. The machine is not threaded correctly. 1. Rethread the machine. breaks 2. The thread tension is too tight. 2. Reduce the thread tension. (lower number) 3. The thread is too thick for the needle. 4.

• Page 31: Intellectual Property

  Problem Cause Correction The machine 1. The machine must be lubricated. 1. Lubricate as described. is noisy 2. Lint or oil have collected on the hook or 2. Clean the hook and feed dog as needle bar. described. oil. 4. The needle is damaged. 4.

• Page 32
  www.husqvarnaviking.com…

21 строчка

Машина оснащена самыми необходимыми при шитье строчками для выполнения рабочих, декоративных и трикотажных швов, а также у вас есть возможность изготовить петлю в полуавтоматическом режиме за 4 переключения.

Нитевдеватель

Встроенный нитевдеватель заметно облегчает заправку нити в иглу, экономя ваше время.

Легкая и компактная

Небольшой вес 6,3 кг модели E10 позволит без труда переносить машину, брать ее с собой на обучающие курсы и мастер-классы. Отличный вариант для тех, кто только начался заниматься шитьем.

Давление лапки

Функция регулировки давления лапки позволяет добиваться максимально хороших результатов при шитье как легких, так и тяжелых тканей, а также при квилтинге или выполнении эластичных швов.

Светодиодная подсветка

Долговечная светодиодная подсветка обеспечит яркое освещение рабочей зоны. Вы можете не думать о том, что лампочка может перегореть в самый неподходящий момент.

Обучение при покупке в магазине

Рекомендуемые товары