Инструкция стиральная машина daewoo dwd m8011a

Оформить вызов мастера можно двумя способами: по телефонам

+7 (495) 215 – 14 – 41

+7 (903) 722 – 17 – 03

или через специальную заявку на сайте. В обоих случаях сообщите, пожалуйста:

• Какая марка и модель у вашей стиральной машины.
• Признаки поломки. Например, машинка не сливает воду или не отжимает белье.
• Удобное для вас время приезда мастера.
• Ваши контактные данные: имя, адрес, телефон для связи.

Мастер в день ремонта позвонит по указанному вами номеру для подтверждения вызова.

Если вы обнаружили неисправность в работе своей Daewoo DWD-M8011, не пытайтесь устранить её своими силами. Самостоятельный ремонт может привести к более серьёзным поломкам и дорогостоящему ремонту. Лучше сразу позвоните в «РемБытТех»! Наш специалист приедет к вам уже в течение 24 часов после обращения и с гарантией до 2 лет отремонтирует вашу машинку так, что она прослужит вам ещё долгие годы.

Перед Вами Инструкция стиральной машины Daewoo DWD-M8011. Вы можете ознакомиться и скачать данное руководство по эксплуатации бесплатно.
Инструкция по применению на русском языке, предложенная производителем, позволяет
правильно использовать Вашу бытовую технику и электронику.

• Инструкции по эксплуатации
  
  3
  

На NoDevice можно скачать инструкцию по эксплуатации для Daewoo DWD-M8011. Руководство пользователя необходимо для ознакомления с правилами установки и эксплуатации Daewoo DWD-M8011. Инструкции по использованию помогут правильно настроить Daewoo DWD-M8011, исправить ошибки и выявить неполадки.

• 16 stron
• 0 mb

Изделие Daewoo DWD-M8011, а также другие, которыми Вы пользуетесь ежедневно, наверняка вы получили в комплекте с инструкцией обслуживания. Из опыта наших пользователей мы знаем, что большинство из Вас не уделили этому особого внимания. Большая часть инструкций, сразу же после покупки попадает в корзину для мусора вместе с коробкой — это ошибка. Ознакомьтесь с информацией, касающейся инструкции Daewoo DWD-M8011, которая поможет Вам в будущем сэкономить нервы и избежать головной боли.

Важная подсказка — не забывайте хотя бы раз прочитать инструкцию Daewoo DWD-M8011

Summary of Contents for Daewoo DWD-M8011

Что находится в инструкции Daewoo DWD-M8011? Почему стоит ее прочитать?

1. Гарантия и подробности, касающиеся техобслуживания изделия
   Хорошей идеей будет прикрепить чек к странице инструкции. Если что-то плохое случится во время использования Daewoo DWD-M8011, у вас будет комплект документов, необходимый для гарантийного ремонта. В этой части инструкции вы найдете информацию об авторизованных сервисных центрахDaewoo DWD-M8011 а также, как самостоятельно правильно ухаживать за оборудованием — так, чтобы не потерять гарантийных прав.
2. Указания по монтажу и Setup
   Не терять нервов и времени на самостоятельную попытку установки и первого запуска изделия. Воспользуйтесь рекомендациями производителя Daewoo DWD-M8011 чтобы правильно запустить изделие, без лишнего риска повреждения оборудования.
3. Информация, касающаяся дополнительных запчастей (входящих в комплект а также являющихся опцией)
   Пересматривая эту часть документа вы сможете проверить, доставлен ли ваш Daewoo DWD-M8011 с полним комплектом аксессуаров. Вы также сможете узнать, какие дополнительные запчасти или аксессуары для Daewoo DWD-M8011 Вы сможете найти и докупить к своему устройству.
4. Troubleshooting
   Самые частые проблемы, касающиеся Daewoo DWD-M8011 и методы их решения. Это очень полезная часть руководства по обслуживанию — она позволит Вам сэкономить много времени на поиск решений. 90% проблем с Daewoo DWD-M8011 повторяется у многих пользователей.
5. Требования, касающиеся питания и энергетический класс
   Информация, касающаяся количества потребляемой энергии, а также рекомендации, касающиеся установки и питания Daewoo DWD-M8011. Прочитайте, чтобы оптимально пользоваться Daewoo DWD-M8011 и не использовать большего количества ресурсов, нежели это необходимо для правильной работы изделия.
6. Специальные функции Daewoo DWD-M8011
   Здесь вы можешь узнать, как персонализировать изделие Daewoo DWD-M8011. Вы узнаете, какие дополнительные функции могут помочь Вам удобно использовать продукт Daewoo DWD-M8011 а также, какие функции Вашего устройства оптимальны для выполнения конкретной деятельности.

Как видите в инструкции вы найдете информацию, которая реально поможет Вам в использовании Вашего изделия. Стоит с ней ознакомиться, чтобы избежать разочарований, возникающих из более короткого, нежели предусматривалось, периода исправности изделия Daewoo DWD-M8011. Если все же вы не хотите копить инструкции в своем доме, наш сайт поможет Вам в этом — вы должны найти у нас руководство по обслуживанию большинства из своих устройств, а также Daewoo DWD-M8011.

Комментарии (0)

S/M No. : WDM8011001
Service Manual
Washing Machine
Model: DWD-M8011
DWD-M8021
✔ Caution
: In this Manual, some parts can be changed for improving,
their performance without notice in the parts list. So, if you
need the latest parts information, please refer to PPL(Parts
Price List) in Service Information Center (http://svc.dwe.co.kr).
DAEWOO ELECTRONICS CORP.
http : //svc.dwe.co.kr
Jun. 2007
SHER
AUTO WASHER
TO WASHER
SHER
SHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AU
AUTO WASH
Contents
WASHING MACHINE
AU
AUTO WASH
AUTO WASHER
AUTO WASHER
AU
AUTO WASH
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASH
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
AUTO WASHER
TO WASHER
SHER
AUTO WASHER
AUTO WASHER
TO WASHER
AUTO WASHER
1. SPECIFICATIONS....................................................................................................................2
2. INSTALLATION .......................................................................................................................4
Removing transit bolts ......................................................................................................4
Installation place requirement...........................................................................................4
Location of washer............................................................................................................4
BS Plug Safety Details (For U.K. User)............................................................................5
Connecting inlet hose .......................................................................................................5
Installation of drain hose...................................................................................................6
Level adjustment...............................................................................................................6
3. MAINTENANCE .......................................................................................................................7
Cleaning your washer .......................................................................................................7
Cold condition or Winter storage ......................................................................................7
Cleaning the water inlet filter.............................................................................................8
Cleaning the drain filter. ....................................................................................................8
Cleaning the detergent case.............................................................................................9
Cleaning the washing drum. .............................................................................................9
4. DIRECTION FOR DISASSEMBLY .......................................................................................10
5. EXPLODE VIEW AND PARTS LIST ....................................................................................13
6. FUNCTIONS OF THE CONTROL PANEL ............................................................................20
7. FUNCTIONS OF THE CONTROLLER..................................................................................22
8. FUNCTION OF THE CONVENIENT SERVICE.....................................................................25
9. TROUBLESHOOTING GUIDE ..............................................................................................26
10. WIRING DIAGRAM .............................................................................................................29
1. SPECIFICATIONS
■ DWD-M801X SERIES
INLET HOSE (HOT)
(OPTION)
INLET HOSE (COLD)
DETERGENT CASE
POWER CORD
CONTROL PANEL
DOOR
HOSE DRAIN
COVER PUMP
ADJUSTABLE LEG
MODEL
DWD-M8011/8012/8013
POWER SOURCE
220~240V / 50, 60Hz
DIMENSION (WXDXH)
595mm x 440mm x 850mm
WEIGHT
43 Kg
WATER CONSUMPTION
42 l
POWER CONSUMPTION
2000 W
MAXIMUM MASS
WASH
5.5 / 6 Kg
OF TEXTILE
SPIN
5.5 / 6 Kg
WASHER TYPE
DRUM TYPE (FRONT LOADING WASHING MACHINE)
OPERATING WATER PRESSURE
0.3~8kgf/cm2 (29.4~784KPa)
■ Accessories
Inlet hose
(Cold: 1EA, Hot: 1EA)
2
SPECIFICATIONS
Manual
Sticker holder (3EA)
Guide Hose Drain
(Option)
■ DWD-M802X SERIES
INLET HOSE (HOT)
(OPTION)
INLET HOSE (COLD)
DETERGENT CASE
POWER CORD
CONTROL PANEL
DOOR
HOSE DRAIN
COVER PUMP
ADJUSTABLE LEG
MODEL
DWD-M8021/8022/8023
POWER SOURCE
220~240V / 50, 60Hz
DIMENSION (WXDXH)
595mm x 440mm x 850mm
WEIGHT
43 Kg
WATER CONSUMPTION
42 l
POWER CONSUMPTION
2000 W
MAXIMUM MASS
WASH
5.5 / 6 Kg
OF TEXTILE
SPIN
5.5 / 6 Kg
WASHER TYPE
DRUM TYPE (FRONT LOADING WASHING MACHINE)
OPERATING WATER PRESSURE
0.3~8kgf/cm2 (29.4~784KPa)
■ Accessories
Inlet hose
(Cold: 1EA, Hot: 1EA)
Manual
Sticker holder (3EA)
Guide Hose Drain
(Option)
SPECIFICATIONS
3
2. INSTALLATION
■ Removing transit bolts
1. Before operating the washer, remove the transit
bolts(3ea) along with the rubber.
• If the bolts are not removed, it may cause heavy
vibration, noise and malfunction.
2. Unscrew the 3 bolts with the 10mm hex wrench or
spanner or cross-tip screwdriver. Keep the 3 bolts for
a later time.
• When the appliance is transported, transit bolts will
be re-used.
3. Close the holes with sticker holders supplied.
■ Installation place requirement
m
0c
a
ab
bo
1
ut
ou
t2
• Level floor :
Allowable slope between the washer and floor is 1°.
• Electric outlet :
Must be with 1meter of either side of the washer.
Do not overload the outlet with more than one appliance.
• Additional clearance
Clearance between the washer and the wall is required.
(rear : about 10cm, left & right : about 2cm)
In case of built-in installation, the clearance between the top of
the washer and the under of the work-top is required.
(top : about 2cm)
cm
■ Location of washer
Make sure that you have to do everything necessary for correct installation.
Install the washer on a solid and flat floor, if possible, in a corner of the room and the easily accessible place for an
engineer.
• Before placing the washer, if installed on tiles, apply a rubber mat under the adjustable leg.
• The washer must not be installed or stored in rooms below 0°C to avoid any damage from freezing.
• Do not insert pieces of wood, cardboard or similar materials under the adjustable leg to correct any unevenness.
• Do not place laundry products on top of the washer at all times.
• An air circulation around the washer must not be obstructed by carpets, rug etc.
4
INSTALLATION
■ BS Plug Safety Details (For U.K. User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW : EARTH
BLUE : NEUTRAL
BROWN : LIVE
This appliance must be earthed
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked
with the letter E or by the earth symbol
or coloured Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal witch is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal witch is marked with the letter N or
coloured Red.
If a 13 amp (BS 1363) plug is used, fit a 13amp BS 1362 fuse.
■ Connecting inlet hose
• The washer should be connected to the water mains using new hose set and old hose sets should not be reused.
• In case of only one water inlet valve, connect the inlet hose to the cold water tap.
1. Connect the inlet hose
to the water tap tightly.
2. Connect the inlet
hose to the water
inlet valve
tightly.
• Periodically check the tightness of the inlet hose.
• Make sure that the inlet hose is not kinked or folded and that it is not crushed.
INSTALLATION
5
■ Installation of drain hose
• Never forget to install drain hose before operating your washer.
• Open the packing box, and the drain hose is tied at backside of washer.
• If you use the laundry tub, Top of laundry tub must be at least 60cm high and no higher than 100cm from bottom of washer.
• When installing the drain hose to tub(sink), secure it tightly with a string.
• Proper securing of the drain hose will protect the floor from damage due to water leakage.
• When the drain hose is too long, do not force it back into the washer.
This will cause abnormal noise.
■ Level adjustment
• The level adjustment of the washing machine prevents exces-
sive noise and vibration.
• If the floor is uneven, adjust the adjustable leg as the following.
leg
leg
(Do not insert pieces of wood etc. under legs.)
• Please check whether there is any gap between four
adjustable legs and the floor.
• Turn adjustable legs by the spanner in order to adjust the level
of the washing machine.
• Make it sure that there is no swaying of the washing machine
and check that the washing machine is even completely.
(use a spirit level or the diagonal check.)
• After the level adjustment is finished, turn fixing nuts up tightly
so that the washing machine maintains the adjustment.
Fixing Nut
❈ Diagonal Check
When pushing down the edges of the washing machine top
plate diagonally, the machine should not move up and down
at all.
(Please, check both of two directions)
If machine rocks when pushing the machine top plate diagonally, adjust legs again.
6
INSTALLATION
3. MAINTENANCE
❈ Before cleaning the washer interior, unplug the electrical power cord to avoid electrical shock hazards.
Proper care of your washer can extend its life. This section explains how to care for your washer properly and safely.
■ Cleaning your washer
Exterior
Interior
• Clean with warm water and a neutral non
abrasive household detergent.
• Clean with 250ml of chlorine bleach mixed with 500ml
of the detergent.
• Immediately wipe off detergent, bleach and other spills
with a soft and damp cloth or sponge.
• Occasionally wipe off the outside of the
• Open the door of the washer and dry the gasket and
door glass.
• Run the washer complete cycle with hot water.
washer to keep its looking like new one.
• If necessary, repeat the process.
Do not put sharp or metal object in your washer, or they can damage the finish.
Check all pockets for pins, clips, money, bolts, nuts, etc.
Do not lay these objects in your washer after emptying pockets.
■ Cold condition or Winter storage
Install and store your washer where it will not freeze. Because some water may stay in the hoses, freezing can damage
your washer.
If you store or move your washer during freezing weather, follow these instructions to prevent the damage to the washer.
1. Turn off the water tap.
2. Disconnect inlet hose(s) from water supply and drain the water from hose(s).
3. Plug the power cord and Open the door.
4. Add about 3 l of nontoxic antifreeze into the drum. Close the door.
5. Run the washer on spin or drain cycle to drain out all water.
6. Unplug the power cord and open the door to dry the drum interior. Close the door.
7. Dry excessive water of the detergent case.
8. To remove the remaining antifreeze, run the washer on complete cycle using the detergent and without the laundry.
MAINTENANCE
7
■ Cleaning the water inlet filter.
• “IE” error message (refer to troubleshooting guide) will display when the water does not enter the detergent case.
• If your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged.
And the water leaks from the water inlet.
• It is therefore a good idea to clean it from time to time.
1 Turn off the water tap.
2 Separate the inlet hose.
3 Pull out the inlet filter.
Clean the inlet filter
with the brush
4 Connect the inlet hose
■ Cleaning the drain filter.
• This drain filter is used to screen the foreign stuffs such as threads, coins, pins, buttons etc..
• If the drain filter is not cleaned at proper time(every 10 times of use), drain problem could be caused.
CAUTION : Be careful when draining if the water is hot.
1. Open the cover-pump(1)
by using coin.
Separate the cover-pump(1)
from the washing machine.
2. Install the cover-pump(1) to the
lower frame(2).
Open the pump-filter(3) slowly
and allow the remaining water to
flow into a suitable container.
3. Remove foreign objects
from the pump-filter(3) and
clean the interior.
Close the pump-filter(3) and
replace the cover-pump(1).
3
1
2
1
1
8
MAINTENANCE
3
■ Cleaning the detergent case.
• In case of residual detergents or fabric softeners have accumulated ;
- it should be cleaned with a jet of running water.
- If necessary, it can be removed completely from the washing machine.
Push point
1 Pull-out
2 Push and pull again
• Detergents can be also accumulate the inside cavity.
In this case, the inside cavity should be cleaned with a brush.
• After cleaning, replace the detergent case and run Rinse cycle without laundry.
■ Cleaning the washing drum.
• If you live in a hard-water area, the limescale may be accumulated in the place where it cannot be seen
(So, it is not easily removed.)
• The successive accumulation of the scale clogs the washer.
• Although the washing drum is made of stainless steel, specks of rust can be caused by small metal articles (paper
clips, safety pins) which have been left in the drum.
• The washing drum should be cleaned from time to time.
• If you use descaling chemical agents (dyes, bleaches and etc.), make sure they are suitable for washer. (They
may contain chemicals that damages your washer.)
* Remove any spots with a stainless steel cleaning agents. (Do not use steel wool.)
MAINTENANCE
9
4. DIRECTION FOR DISASSEMBLY
DOOR LOCK SWITCH
1 Open the door and remove the clamp door as.
2 Separate the gasket from the cabinet front and remove
two screws.
3 Remove the door lock switch from the cabinet front .
DRAIN PUMP
1 Separate the cover pump from the cabinet front and
remove screw.
3 Remove the hose drain o from the pump.
10
DIRECTION FOR DISASSEMBLY
2 Lay the right-side of the washer on the floor. And sepa
rate connectors and hose drain from the pump.
HEATER AND THERMISTOR
1 Separate the plate t as from the washer.
(Remove two screws at rear)
2 Separate the case detergent as and remove two
screws from panel f.
3 Separate the panel f as from the washer.
4 Separate the cabinet front from the washer.
(Remove the clamp door as and 4 screws)
5 Separate connectors from the heater and remove the
nut by using a box wrench.
6 Remove the earth terminal and loosen the nut by using
a box wrench
7 Pull out the heater from the tub.
DIRECTION FOR DISASSEMBLY
11
UNIVERSAL MOTOR
Firstly, you have to do from 1 to 5 of HEATER AND THERMISTOR DISASSEMBLY.
12
1 Separate the box inlet as from the washer.
(remove screws and hose inlet)
2 Remove the screw of the motor connector.
And separate the connector from the tub.
3 Separate the hose air from the sensor pressure.
4 Lay the front-side of washer on the floor.
And remove four screws.
5 Separate two dampers and the hose drain.
6 Lift up the cabinet as.
7 Separate the belt.
8 Remove two screws from the motor and remove the
screw from the drum using a box wrench.
DIRECTION FOR DISASSABLY
5. EXPLODE VIEW AND PARTS LIST
■ BOX INLET AS
No.
PART NAME
PART CODE
SPECIFICATION
Q'TY
3612610900 HIPS
1
REMARK
DWD-M801X's
A01
HANDLE CASE
A02
CASE DETERGENT
3611145800 PP
1
A03
CAP SOFTENER
3610907800 PP
1
A04
BOX INLET
3610527500 PP
1
A05
NOZZLE AS
A06
SCREW TAPPING
7122401411 T2S TRS 4X14 MFZN
A07
HOSE WATER SUPPLY
3613270900 EPDM ID=9.5 OD=14.5 L=215
2(1)
COLD(HOT)
A08
CLAMP HOSE
3611205800 ID=13.8 W=10.0 0.9T
4(2)
COLD(HOT)
A09
VALVE INLET
A10
SCREW TAPTITE
3612611000 HIPS
3618105700
3618105710
NOZZLE TOP + NOZZLE UNDER
1
DWD-M802X's
COLD ONLY
COLD+HOT
1
3615414910 220-240V 2-WAY NYLON/BRACKET VDE
1
COLD
3615414800 220-240V 1-WAY HOT PP-BRACKET
1
HOT
7272400811 TT3 TRS 4X8 MFZN
2
EXPLODE VIEW AND PARTS LIST
13
■ PANEL FRONT AS
No.
B01
PANEL F
B02
WINDOW LED
B03
BUTTON SELECT
B04
KNOB DIAL AS
B05
B06
B07
14
PART NAME
PCB AS
SCREW TAPPING
SCREW TAPPING
EXPLODE VIEW AND PARTS LIST
PART CODE
3614287400
3614287500
3615505200
3615505300
3616636400
3616636500
3613406300
3613406200
PRPSSWC000
PRPSSWC001
PRPSSWC002
PRPSSWC003
PRPSSWC010
PRPSSWC011
PRPSSWC012
PRPSSWC013
7122401611
7122401608
SPECIFICATION
Q'TY
HIPS
1
ABS TRANSPARENT
1
ABS
1
KNOB+DECO+SHAFT
1
OPTION(COLD+HOT, BB) CASE PCB(HIPS)
OPTION(COLD, NB) CASE PCB(HIPS)
OPTION(COLD, BB) CASE PCB(HIPS)
OPTION(COLD+HOT, NB) CASE PCB(HIPS)
OPTION(COLD+HOT, BB) CASE PCB(HIPS)
OPTION(COLD, NB) CASE PCB(HIPS)
OPTION(COLD, BB) CASE PCB(HIPS)
OPTION(COLD+HOT, NB) CASE PCB(HIPS)
T2S TRS 4X16 MFZN
T2S TRS 4X16 SUS 430
REMARK
DWD-M801X's
DWD-M802X's
DWD-M801X's
DWD-M802X's
DWD-M801X's
DWD-M802X's
DWD-M801X's
DWD-M802X's
DWD-M801X's
1
DWD-M802X's
6
2
■ CABINET FRONT AS
No.
PART NAME
PART CODE
SPECIFICATION
Q'TY
C01
CABINET F AS
3610812810 PAINTING T=0.7
C02
NUT HEX
7S627W50X1 NUT FLANGE M5X0.8P MFZN
2
C03
SCREW TAPPING
3616051229 STS430 F/L BOLT(SE) 5*12
2
C04
CAP HINGE DOOR
3610916500 POM
2
C05
HINGE DOOR
3612903700 ALDC
1
C06
FRAME DOOR I
3612208700 PP
1
C07
HANDLE DOOR
3612610800 ABS
1
C08
HOOK DOOR
3613101200 POM
1
C09
SPRING HOOK
3615114600 SUS D1.4
1
C10
PIN HANDLE
3618200200 SUS304, D3, L48
1
REMARK
1
C11
DOOR GLASS
361A110700 GLASS PI300
1
C12
FRAME DOOR O
3612208600 HIPS
1
C13
SCREW TAPPING
7115401629 T1 FLT 4X16 SUS
7
C14
SWITCH DOOR LOCK
3619047100 DL-LC.BITRON_3P.250V16A.BI-METAL
1
C15
SCREW TAPPING
7122401208 T2S TRS 4X12 SUS
2
C16
CLAMP DOOR AS
3611204810 HSW3, D1.4
1
C17
COVER PUMP
3611428500 HIPS
1
C18
SCREW TAPPING
3616029950 TTS"S" HEX F/L 4*8
4
EXPLODE VIEW AND PARTS LIST
15
■ TUB AS
16
EXPLODE VIEW AND PARTS LIST
No.
PART NAME
PART CODE
SPECIFICATION
Q'TY REMARK
D01
TUB REAR AS
3618829900
TUB REAR(FRPP) + BEARING HOUSING(ALDC)
1
D02
BEARING INNER
3616304700
6205ZZ SHENS
1
D03
BEARING OUTER
3616304800
6204ZZ SHENS
1
D04
WATER SEAL
361A600300
NBR
1
D05
GASKET TUB
3612324100
PI=4.5, L=1650, EPDM
1
D06
FIXTURE HEATER
3612009400
SUS, PI=2
1
D07
TUB FRONT
3618829600
FRPP
1
D08
GASKET
3612323500
EPDM
1
D09
CLAMP GASKET AS
3611204520
HSW3
1
D10
DRUM SUB AS
3617010400
SUS T=0.4
1
D11
SPIDER AS
361A301000
SPIDER(ALDC-8) + SHAFT(SM45C)
1
D12
SPECIAL BOLT
3616063000
STS430 M6*21 SI-LOCK
3
D13
LIFTER WASH
361A401110
NANO
3
D14
SPECIAL SCREW(TUB)
3616062700
SWRCH18A 5.6*30
12
D15
PULLEY
3618433210
PA6+GF30%, SERRATION
1
D16
SPECIAL BOLT AS(PULLEY)
3616063100
SWRCH10A M8*22 PW SI-LOCK
1
D17
UNIT MOTOR UNIVERSAL
36189L5H00
SOYEA 2POLES 38T
1
D18
SPECIAL SCREW(MOTOR)
3616062800
SWRCH18A 7.4*25.5
2
D19
BELT V
3616591300
GATES 3PJ1134 BUTADIENE RUBBER
1
3612802450
220V 1.8KW IRCA
3612802460
230V 1.8KW IRCA
3612802470
240V 1.8KW IRCA
D20
HEATER WASH
1
D21
THERMISTOR WASH
361AAAAB10 R25=1.704KΩ, R80=11.981KΩ
1
D22
HARNESS EARTH
3612794450
1
D23
BALANCER WEIGHT
3616108900
PP, INSERT 4KG
2
D24
SPECIAL SCREW(BALANCER) 3616062900
SWRCH18A 8*31 PW
6
D25
HOSE INLET
3613271600
EPDM
1
D26
CLAMP HOSE I
3611201400
HSW3, D=2.6, MFZN D=38
1
D27
SPRING SUSPENSION
3615115900
K=0.39, L=137
2
D28
FRAME TOP
3612208500
SGCC T=1.2
L=180
HOSE DRAIN(EPDM) + AIR TRAP(PP)
+ HOSE AIR(ID=4.0, OD=8, L=560, EPDM)
D29
HOSE DRAIN AS
3613272300
D30
SCREW TAPPING
7122401411
T2S TRS 4X14 MFZN
D31
DAMPER FRICTION
361A700110
70N AKS
361A700140
70N CIMA
D32
DAMPER PIN
361A700200
AKS D=14.5
2
D33
UNIT BUBBLE PUMP AS
36189L4140
220-240V RP CHUSHION=760
1
D34
SPECIAL SCREW(BUBBLE)
3616007400
T2S TRS 4X10+24
2
D35
EMI FILTER(K27)
3611908740
0.22UF
1
D36
SCREW TAPPING
7122401411
T2S TRS 4X14 MFZN
1
+ CLAMP AS(ID=81, CIMA)
1
+ CLAMP HOSE(D=26) + CLAMP HOSE I(D=38)
1
2
EXPLODE VIEW AND PARTS LIST
17
■ CABINET AS
18
EXPLODE VIEW AND PARTS LIST
No.
PART NAME
3610812710
SGCC(GI) T=0.7 PAINTING
FRAME LOWER
3612208400
SGCC T=0.8
1
BASE U L
3610393100
SGCC T=1.4
1
BASE U R
3610393110
SGCC T=1.4
1
E02
E05
Q'TY
SGCC(GI) T=0.7 PCM
CABINET
E04
SPECIFICATION
3610812700
E01
E03
PART CODE
LEG ADJUST AS
HARNESS AS
3617703800
REMARK
1
FOOT(BUTYL)+SPECIAL NUT(SCP1)
4
+SPECIAL BOLT(10x1.25, 51MM)
3617703811
CHINA, FOOT+SPECIAL NUT(M10x1, 25P)
3612797500
COLD+HOT, BB
3612797510
COLD+HOT, NON-BB
3612797520
COLD, NON-BB, NON-REACTOR
3612797530
COLD, BB, NON-REACTOR
3612797540
COLD, NON-BB, REACTOR
3612797550
COLD, BB, REACTOR
36189L5K10
220-240V, 50Hz, 30W, AL, NO-HOLE
1
E06
UNIT DRAIN PUMP AS
1
E07
SCREW TAPPING
7112401211
T1 TRS 4*12 MFZN
1
E08
HOSE DRAIN O AS
3613268520
L=1800, STRAIGHT TYPE, CLAMP PI=27
1
E09
CLAMP HOSE
3611206400
NYLON, DA-18N
1
E10
SCREW TAPPING
7122401411
T2S TRS 4X14 MFZN
1
E11
PLATE T AS
3614540300
HIPS+MFC(400x577x9.3T)+STAPLE(8x10)
1
E12
SCREW TAPPING
7122401411
T2S TRS 4X14 MFZN
2
E13
REACTOR AS
3615800100
E14
SCREW TAPPING
7122401411
T2S TRS 4x14 MFZN
2
E15
CORD POWER AS
3611339630
EU-2PIN H05VV-F 1.0SQ 250V 16A 1.4M
1
E16
SENSOR PRESSURE
3614825310
5V DL-DW12 INLET 180°
1
E17
SCREW TAPPING
7122401411
T2S TRS 4x14 MFZN
1
REACTOR(RT-046B)+BRACKET REACTOR(PP)
+SCREW TAPPING(T2S TRS 4x14 MFZN)
1
EXPLODE VIEW AND PARTS LIST
19
6. FUNCTIONS OF THE CONTROL PANEL
■ DWD-M801X SERIES
Program selector
For switching the washing machine on and off
and for selecting the program.
Can be rotated in both direction.
Even if the program selector rotates while the program is running,
the program is not changed (except for off ) .
(All program is electronically controlled by PCB)
Start/Hold button
Button for options
For starting the washing cycle
(program must have been selected)
(in addition to the program if required)
Intensive wash
Extended washing time.
Rinse +
Extra rinse cycle.
Rinse Hold
No final spin cycle
• Combination of additional option is possible.
• The indicator lamp of the buttons lights up
if options are active.
• Switch off option : Press button again.
20
FUNCTIONS OF THE CONTROL PANEL
■ DWD-M802X SERIES
Program selector
Indicator light
For switching the washing machine on and off
and for selecting the program.
The respective indicator lights up,
when the required program
Can be rotated in both direction.
segment runs or “Time delay” is
selected.
Even if the program selector rotates while the program is running, the program is not changed (except
for off ) .
(All program is electronically controlled by PCB)
Start/Hold button
For starting the washing cycle
(program must have been selected)
Button for options
Time delay
(in addition to the program if required)
To pre-engage time for washing.
Intensive wash
Extended washing time.
As the button is pressed,
the delayed time is repeated
Rinse +
Extra rinse cycle.
Rinse Hold
as following;
3hours ➝ 6hours ➝ 9hours ➝ 12hours
No final spin cycle
➝ 15hours ➝ No pre-engage➝ 3hours
• Combination of additional option is possible.
• The indicator lamp of the buttons lights up
if options are active.
• Switch off option : Press button again.
FUNCTIONS OF THE CONTROL PANEL
21
7. FUNCTIONS OF THE CONTROLLER
■ SEQUENCE CHART
Cotton
Division
P
R
E
Progress Time
Sensing
Water Supply
20sec.
2min.
13min.
8min.
1min.
1min.
5min.
20sec.
2min.
60min.
35min.
30min.
15min.
10min.
73min.
23min.
15min.
1min.
Pre Wash
W
A
S
H
Drain
B-Spin
Middle Spin
Sensing
Water Supply
Wash 1
(Heating)
W
A
S
H
Wash 2
R
I
N
S
E
S
P
I
N
Drain
B-Spin+
Remove
FOAM
Middle Spin
Water Supply
Rinse 1
Drain
B-Spin
Middle Spin
Water Supply
Rinse 2
Drain
B-Spin
Middle Spin
Water Supply
Rinse 3
Drain
B-Spin
END
NOTE
22
COLD
30°C
40°C
60°C
PREWASH
60°C
95°C
QUICK30
MIXED
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
1:13
■
■
1:23
■
■
1:28
■
■
1:43
■
■
1:59
■
■
2:13
■
■ (1)
■
■
■ (5)
■
■ (5)
■
■
1min.
5min.
2min.
3min.
1min.
1min.
5min.
2min.
3min.
1min.
1min.
5min.
2min.
3min.
1min.
1min.
7min.
5min.
3min.
2min.
10sec.
Main Spin
Untangle
End
Total Time
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
32
■
■
1:23
■ (1)
■
■
■ (1)
■
• The washing time may vary by the amount of laundry, water pressure, water temperature and
other washing conditions. If an unbalanced load is detected or if suds removing program operates, the washing time maybe extended. (Maximum increasing time is about 1hour.)
• The Spin RPM of cotton course is 800.
FUNCTIONS OF THE CONTROLLER
Synthetic
Division
P
R
E
W
A
S
H
Sensing
Water Supply
Pre Wash
Drain
B-Spin
Middle Spin
Sensing
Water Supply
Wash 1
(Heating)
W
A
S
H
Wash 2
R
I
N
S
E
S
P
I
N
Drain
B-Spin +
Remove
FOAM
Middle Spin
Water Supply
Rinse 1
Drain
B-Spin
Middle Spin
Water Supply
Rinse2
Drain
B-Spin
Middle Spin
Water Supply
Rinse3
Drain
B-Spin
END
NOTE
Main Spin
Untangle
End
Total Time
Progress Time
20sec.
2min.
13min.
8min.
1min.
1min.
5min.
20sec.
2min.
60min.
35min.
30min.
15min.
10min.
73min.
23min.
15min.
1min.
COLD
30°C
40°C
60°C
PREWASH
60°C
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
1:13
■
■
1:23
■
■
1:28
■
■
1:43
■
■
1:59
1min.
5min.
2min.
3min.
1min.
1min.
5min.
2min.
3min.
1min.
1min.
5min.
2min.
3min.
1min.
1min.
7min.
5min.
3min.
2min.
10sec.
• The washing time may vary by the amount of laundry, water pressure, water temperature and
other washing conditions. If an unbalanced load is detected or if suds removing program operates, the washing time maybe extended. (Maximum increasing time is about 1hour.)
• The Spin RPM of synthetic course is 800.
FUNCTIONS OF THE CONTROLLER
23
Wool
Division
P
R
E
Progress Time
Sensing
Water Supply
20sec.
2min.
13min.
8min.
1min.
1min.
5min.
20sec.
2min.
60min.
35min.
30min.
15min.
10min.
73min.
23min.
15min.
1min.
Pre Wash
W
A
S
H
Drain
B-Spin
Middle Spin
Sensing
Water Supply
Wash 1
(Heating)
W
A
S
H
Wash 2
R
I
N
S
E
S
P
I
N
Drain
B-Spin+
Remove
FOAM
Middle Spin
Water Supply
Rinse 1
Drain
B-Spin
Middle Spin
Water Supply
Rinse 2
Drain
B-Spin
Middle Spin
Water Supply
Rinse 3
Drain
B-Spin
END
NOTE
24
Delicate
COLD
30°C
40°C
HAND
WASH
COLD
30°C
40°C
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■ (5)
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
1:13
■
■
1:23
■
■
1:28
(23)
(23)
(23)
1min.
5min.
2min.
3min.
1min.
1min.
5min.
2min.
3min.
1min.
1min.
5min.
2min.
3min.
1min.
1min.
7min.
5min.
3min.
2min.
10sec.
Main Spin
Untangle
End
Total Time
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
58
■
■
1:08
■
■
1:13
■
■
1:05
• The washing time may vary by the amount of laundry, water pressure, water temperature and
other washing conditions. If an unbalanced load is detected or if suds removing program operates, the washing time maybe extended. (Maximum increasing time is about 1hour.)
• The Spin RPM of wool course is 450.
FUNCTIONS OF THE CONTROLLER
8. FUNCTION OF THE CONVENIENT SERVICE
■ The test mode of the load movement
You can check the PCB ASS'Y and the condition of each load movement simply.
• The method to test the load movement
1 Plug the power cord.
2 Turn the program selector to the program 1.
(The indicator light of the Start/Hold button is on but not twinkles. If the indicator is twinkles, press the
Start/Hold button and turn the program selector to the off.)
3 Press the Rinse+ button 3times while press the Intensive wash button.
4 Whenever the Rinse hold button is pressed, each load movement is occurred as follows;
Door lock close → Hot valve on → Cold valve on → Pre wash valve on → Bubble pump on → Drain pump on
FUNCTION OF THE CONVENIENT SERVICE
25
9. TROUBLESHOOTING GUIDE
This washer is equipped with automatic safety function which detects and diagnoses faults at an early stage and copes
properly.
When the washer does not operate properly, check the following points.
■ Simply Check Guide
Problem
Cause
Program dose not start. Plug is loose or not plugged in.
Insert plug tightly.
Power failure.
An interrupted program will be resumed when the
power return.
Loading door is not closed.
Check whether laundry is trapped in door.
Close the loading door. (a click should be heard)
Program is not selected.
Select the desired program.
Start/hold button is not pressed.
Press the Start/hold button.
Water tap is not turned on.
Turn the water tap on.
Inlet hose is kinked or folded.
Straighten the inlet hose.
Filters is blocked in water inlet filter.
Clean the water inlet filter.
Drain hose is kinked or clogged.
Straighten and clean the drain hose.
Pump filter is clogged.
Clean the pump filter
The amount of laundry is too
small.
Add the laundry to balance. And repeat the Spin
cycle.
The laundry is unbalanced.
Rearrange the laundry. And repeat the Spin cycle.
If articles of heavy clothing (e.g. bath robe) are loaded, washing machine may skip or stop the spin cycle.
Spin result is unsatisfactory.
Drain hose is placed over 1m
above the floor.
Place the drain hose under 1m above the floor.
Foam come out of the
detergent case.
Too much detergent or unsuitable
detergent used.
Repeat the Rinse cycle.
Serious noise and
vibration
Transit bolts are not removed.
Remove the transit bolts
Washing machine is installed on
uneven floor.
Reinstall washing machine on even floor.
Washing machine is not leveled.
Adjust the level of washing machine using adjustable
legs.
Water dose not enter
the washing machine.
Washing machine is
not drain.
Washing machine is
not spin.
26
Solution
TROUBLESHOOTING GUIDE
■ DISPLAY ERROR MESSAGE
When mechanical or electrical troubles of the washer are occurred, indicator lights of buttons twinkle
simultaneously as follows;
ERROR
Indicator Light twinkling
MESSAGE
Start/Hold
Intensive wash
IE
●
●
PFE, OE, E4
●
E7, E8
●
E2, E9
●
●
H2, H4, H5, H6, H8
●
●
UE
●
LE
●
MESSAGE
IE
OE
UE
LE
ERROR
UNBALANCE
ERROR
DOOR OPEN
ERROR
Rinse Hold
●
●
●
CAUSE
●
●
●
●
●
●
SOLUTION
The water tap is closed.
Open the water tap.
The filter of the valve inlet is clogged.
Clean the filter of the valve inlet.
The valve inlet is an inferior product or broke
WATER INLET down.
ERROR
The water level sensor (sensor pressure) is an
inferior product or broke down.
DRAIN
ERROR
Rinse+
Change the valve inlet.
Change the water level sensor
(sensor pressure).
The drain motor works during water supply.
Change the drain motor.
The PCB ASS’Y does not check the water level.
Change the PCB ASS’Y.
The drain hose is kinked or clogged.
Clean and straighten the drain hose.
The drain motor is an inferior product.
Change the drain motor.
The valve inlet works during drain.
Change the valve inlet
The water level sensor is an inferior product.
Change the water level sensor.
The PCB ASS’Y does not check the water level.
Change the PCB ASS’Y.
The laundry is concentrated to one side of the
drum during spin.
Rearrange the laundry.
The Start/Hold button is pressed while the door is
opened.
Close the door.
The switch door lock is an inferior product.
Change the switch door lock.
The PCB ASS’Y does not check the door lock.
Change the PCB ASS’Y.
TROUBLESHOOTING GUIDE
27
MESSAGE
ERROR
E2
OVERFLOW
ERROR
SOLUTION
The water is supplied continuously due to an
inferior valve inlet.
Change the valve inlet.
The valve inlet is normal, but the water level
sensor (sensor pressure) is inferior.
Change the water level sensor (sensor
pressure).
The drain motor dose not work. (The drain
motor is an inferior product or broke down.)
Change the drain motor.
E4
LEAKAGE
ERROR
Water leaks from the tub or the hose drain.
Check the leak of the tub or the hose drain.
Then change the tub or the hose drain.
E7
DIRECTION
ERROR
The motor spins into an opposite direction.
Change the PCB ASS’Y or the motor.
The motor hall IC is an inferior product or broke
down.
Change the motor hall IC or the motor.
The motor is not normally connected.
Check the connector of the motor.
The motor does not work. (The motor is an
inferior product or broke down.)
Change the motor.
E8
MOTOR
ERROR
E9
SENSOR
PRESSURE
ERROR
The water level sensor is an inferior product.
Change the water level sensor.
H2
THERMISTOR
WASH ERROR
The thermistor wash is an inferior product or
broke down.
Change the thermistor wash.
The thermistor wash is not connected normally.
Check the connector of the thermistor
wash.
H4
THERMISTOR The heater worked without the water in the tub.
WASH
OVERHEATING The thermistor wash is an inferior product or
ERROR
broke down.
Check the water level.
Change the thermistor wash.
The water temp. is over 45°C in delicate & wool Change the thermistor wash.
course. (The thermistor wash is an inferior
product or broke down.)
H5
WATER TEMP.
ERROR
H6
HEATER WASH The heater wash dose not work. (The water
ERROR
temp. doesn't rise over 2°C during 15min.)
Change the heater wash.
H8
HEATER
The heater worked without the water in the tub.
WASH
OVERHEATING
ERROR
Check the water level and the heater
wash.
PFE
28
CAUSE
PUMP FILTER
ERROR
TROUBLESHOOTING GUIDE
The drain pump filter is clogged.
Clean the drain pump filter.
The drain pump does not work during spin.
Change the drain pump.
The large amount of detergent was used.
Use the proper amount of detergent.
The drain hose is placed higher than 1m above
the floor.
Place the drain hose 1m below the floor
10. WIRING DIAGRAM
WIRING DIAGRAM
29
DAEWOO ELECTRONICS CORP.
686, AHYEON-DONG MAPO-GU SEOUL, KOREA
C.P.O. BOX 8003 SEOUL, KOREA
TELEX: DWELEC K28177-8
CABLE: “DAEWOOELEC”
S/M No. :
PRINTED DATE: Jun. 2007