Kenwood krf v4550d инструкция на русском языке

Краткое содержание страницы № 1

AUDIO VIDEO SURROUND RECEIVER
KRF-V4550D
INSTRUCTION MANUAL
KENWOOD CORPORATION
B60-4967-10 01 MA (E2) 0009
*4967/01-/EN 1 3/19/01, 6:33 PM
Additional Information Operations Preparation

Краткое содержание страницы № 2

Preparations Caution : Read this page carefully to ensure safe Before applying the power operation. Units are designed for operation as follows. Unpacking 2 U.S.A. and Canada ………………………………………………… AC 120 V only Unpack the unit carefully and make sure that all accessories are put Australia ……………………………………………………………….. AC 240 V only aside so they will not be lost. Europe and U.K. ……………………………….

Краткое содержание страницы № 3

Before applying the power Contents Maintenance of the unit 3 When the front panel or case becomes dirty, wipe with a soft, dry Caution : Read the pages marked carefully to ensure cloth. Do not use thinner, benzine, alcohol, etc. for these agents may safe operation. cause discoloration. Before applying the power ………………………… 2 Safety precautions ……………………………………… 2 Unpacking …………………………………………………. 2 In regard to co

Краткое содержание страницы № 4

Preparations Before applying the power How to use this manual Special features 4 This manual is divided into three sections, Preparations, Operations, True home theater sound and Additional Information. This receiver incorporates a wide variety of surround modes to bring you maximum enjoyment from your video software. Select a surround Preparations mode according to your equipment or the software you are going to Shows you how to connect your audio and video components to the play and enjoy! ∞ r

Краткое содержание страницы № 5

Names and functions of parts Frequency display, PRO LOGIC Input display, 5 indicator Preset channel display, AUTO SOUND indicator DIGITAL indicator Surround mode display Band indicators S.DIRECT indicator Speakers’ indicator AUTO indicator MEMO. indicator MUTE indicator ST. indicator TUNED indicator RDS indicators MONITOR indicator DOWN MIX indicator Speaker selection indicators 3 STEREO indicator Input channel indicators STEREO indicator Output channel indicators Display 1 POWER key ^ 7 DIMMER

Краткое содержание страницы № 6

Preparations Names and functions of parts Remote control unit 6 POWER RECEIVER 1 Numeric keys £ 7 DISC SKIP key $ LISTEN MODE key § If CD or MD is selected as the input source, Use to select the listening mode. If CD is selected as the input source, this key these keys function as numeric keys. If functions as the multi-CD player disc skip key. RETURN key tuner is selected as the input source, these A/B key Use to operate other components. keys are used to call up station presets. % ENTER key If

Краткое содержание страницы № 7

Setting up the system Make connections as shown in the following pages. Input mode settings When connecting the related system components, be sure 7 to also refer to the instruction manuals supplied with the CD/DVD, DVD/6ch and VIDEO2 inputs each include jacks for digital components you are connecting. audio input and analog audio input. Do not connect the power cord to a wall outlet until all You must select beforehand which type of input is to be used for each connections are completed. connec

Краткое содержание страницы № 8

Preparations Setting up the system Connecting audio components 8 SYSTEM CONTROL jacks # To AC wall outlet VIDEO2/MONITOR jacks You can connect an equal- izer in Monitor mode, or a video component in Video 2 mode. OUT Video component, 3 head cassette deck, or Graphic equalizer ( IN OUT Cassette deck or MD recorder IN OUT CD player Moving Coil (MC) cartridge record player cannot be used directly from the receiver unit. It can only be used when OUT another equilizer amplifier is connected. Record

Краткое содержание страницы № 9

Setting up the system Connecting video components 9 IN OUT IN OUT Video deck Audio inputs Video inputs and outputs and outputs (Yellow RCA pin cords) OUT OUT DVD player or LD player Monitor TV VIDEO IN Video Inputs (Yellow RCA pin cord) A video component with digital audio outputs should be connected to the VIDEO2 jacks. *4967/01-/EN 9 3/19/01, 6:33 PM Preparations

Краткое содержание страницы № 10

Preparations Setting up the system Connecting a DVD player (6-channel input) 10 If you have connected a DVD player to the receiver with digital connection, be sure to read the «Input mode settings» section carefully. 7 FRONT SURROUND OUT L/R OUT L/R CENTER OUT DVD player SUBWOOFER OUT VIDEO OUT COAXIAL (Yellow RCA DIGITAL pin cord) OUT (AUDIO) To switch the speakers off , press the MUTE key. CAUTION Be sure to adhere followings or proper ventilation will be blocked causing damage or fire hazard

Краткое содержание страницы № 11

Setting up the system Digital connections 11 The digital in jacks can accept Dolby Digital, or PCM signals. Connect components capable of outputting Dolby Digital, or standard PCM (CD) format digital signals. If you have connected any digital components to the receiver, be sure to read the «Input mode settings» section carefully. 7 OPTICAL DIGITAL OUT (AUDIO) CD player Optical fiber cable COAXIAL DIGITAL OUT (AUDIO) Component with a Dolby Digital, or PCM COAXIAL DIGITAL OUT COAXIAL DIGITAL Conne

Краткое содержание страницы № 12

Preparations Setting up the system Connecting the antennas 12 AM loop antenna FM indoor antenna The supplied loop antenna is used for indoors. Place it as far as possible The supplied indoor antenna is for temporary use only. For stable signal from the receiver, TV set, speaker cords and power cord, and adjust the reception we recommend using an outdoor antenna. Disconnect the direction for best reception. indoor antenna when you connect one outdoors. FM antenna terminal connections AM antenna t

Краткое содержание страницы № 13

Setting up the system Connecting the system control 13 Do not connect a system control cord to a cassette deck con- Connecting system control cords after connecting a KENWOOD nected to the VIDEO2/MONITOR jacks. audio component system lets you take advantage of convenient system control operations. This unit is compatible only with the [SL-16] mode. The system SYSTEM CONTROL OPERATIONS control operation is not available if the unit is connected in the Remote Control [XS8], [XS], or [XR] connectio

Краткое содержание страницы № 14

Preparations Operations Additional Informatiion Setting up the system Connecting the speakers 14 • Never short circuit the + and – speaker cords. 1 Strip coating. 2 Push the lever. • If the left and right speakers are connected inversely or the speaker cords are connected with reversed polarity, the sound will be unnatural with ambiguous acoustic imaging. Be sure to connect the speakers correctly. Speaker impedance 3 Insert the cord. 4 Return the lever. After confirming the speaker impedance ind

Краткое содержание страницы № 15

Setting up the system Preparing the remote control 15 Speaker placement Loading the batteries 2 Insert the batteries. 1 Remove the cover. Center speaker Subwoofer 3 Close the cover. Front speaker Listening position Surround speaker Front speakers : Place to the front left and right of the listening position. Front speakers are required for all surround modes. Center speaker : Place front and center. This speaker stabilizes the sound image and helps recreate sound motion. Be sure to connect a • I

Краткое содержание страницы № 16

Preparations Preparing for surround sound 6 Use the MULTI CONTROL to select the appropriate center Speaker settings speaker setting. 16 To enable you to obtain optimum enjoyment from the receiver’s If you selected «LRG» as the front speakers setting. listening modes, make sure to complete the speaker settings 1 CNTR LRG (large): A large center speaker is connected (subwoofer, front, center, and surround speakers) as described below. to the receiver. 2 CNTR NML (normal): An average size center sp

Краткое содержание страницы № 17

Normal playback Preparing for surround sound Input the distance to the speakers. Preparing for playback 4 17 1 Measure the distance from the listening position to each of the Some preparatory steps are needed before starting playback. speakers. INPUT MODE ON/STANDBY AUTO Jot down the distance to each of the speakers. Distance to front speakers: ____ feet (meters) Distance to center speaker: ____ feet (meters) Distance to surround speakers: ____ feet (meters) 2 Use the MULTI CONTROL to select the

Краткое содержание страницы № 18

Operations Normal playback Listening to a source component Adjusting the sound 18 VOLUME CONTROL MULTI CONTROL INPUT SELECTOR SOURCE DIRECT SOUND PHONES MUTE VOLUME CONTROL SPEAKER INPUT SOUND SELECTOR MULTI CONTROL VOLUME BASS BOOST MUTE VOLUME Use the INPUT SELECTOR to select the source you want to 1 listen to. Adjusting the tone The input sources change as shown below: You can adjust the sound quality when the receiver is in the PCM stereo Selecting a source using the INPUT SELECTOR knob an

Краткое содержание страницы № 19

Recording Normal playback Recording audio (analog sources) 19 Muting the sound MONITOR The MUTE key lets you mute the sound of the speakers. Press the MUTE key. SP B TI.VOL L C R CLIP MUTE LFE SW RDS EON PTY LS SRS TP TA NEWS Blinks INPUT SELECTOR To cancel Press the MUTE key again so that the «MUTE» indicator goes off. • Muting can also be canceled by adjusting the volume. Recording a music source When recording a music source, switch the VIDEO2/MONITOR setting to «MONITOR» . 7 SOURCE DIRECT pl

Краткое содержание страницы № 20

Operations Recording Recording video 20 For A-REC mode: 1 Use the INPUT SELECTOR to select the video source (other than «VIDEO1») you want to record. AUTO SOUND AUTO SOUND DIGITAL DIGITAL AUTO AM PRO LOGIC PRO LOGIC S.DIRECT MEMO MHz 3 STEREO MONITOR ST. 2 Set the video deck connected to VIDEO 1 to record. kHz DOWN MIX DSP TUNED • Select the REC MODE to record a digital input source. 3 Start playback, then start recording. AUTO SOUND DIGITAL AUTO AUTO SOUND DIGITAL PRO LOGIC AM PRO LOGIC S.DIREC

• Страница 1

  Operations Preparation Additional Information AUDIO VIDEO SURROUND RECEIVER KRF-V4550D INSTR UCTION MANU AL KENW OOD CORPORA TION B60-4967-10 01 MA (E2) 0009 *4967/01-/EN 3/19/01, 6:33 PM 1[…]

• Страница 2

  2 Preparations W ARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOIS- TURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS IN- SIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, […]

• Страница 3

  3 Preparations Operations Additional Informatiion Before applying the power ………………………… 2 Safety precautions ……………………………………… 2 Unpacking …………………………………………………. 2 How to use this manual ………………………………. 4 Special features …………………..[…]

• Страница 4

  4 Preparations Special features How to use this manual This manual is divided into three sections, Preparations, Operations, and Additional Information. Preparations Shows you how to connect your audio and video components to the receiver and prepare the surround processor. We will guide you to make setting up your system as easy as possible. Howev[…]

• Страница 5

  5 Preparations Display Speaker selection indicators Input channel indicators Output channel indicators Band indicators AUTO indicator MEMO. indicator ST. indicator TUNED indicator 3 STEREO indicator STEREO indicator Names and functions of parts Frequency display, Input display, Preset channel display, Surround mode display Speakers’ indicator […]

• Страница 6

  6 Preparations Names and functions of parts Remote control unit 7 DISC SKIP key If CD is selected as the input source, this key functions as the multi-CD player disc skip key. A/B key If TAPE is selected as the input source, this (A and B) of a double cassette deck. +100 key Use to select the disc number with the multi-CD player. 8 INPUT SELECTOR k[…]

• Страница 7

  7 Preparations Make connections as shown in the following pages. When connecting the related system components, be sure to also refer to the instruction manuals supplied with the components you are connecting. Do not connect the power cord to a wall outlet until all connections are completed. Setting up the system Analog connections Audio connectio[…]

• Страница 8

  8 Preparations Connecting audio components To AC wall outlet Cassette deck or MD recorder CD player IN SYSTEM CONTROL jacks # Video component, 3 head cassette deck, or Graphic equalizer ( IN OUT OUT OUT VIDEO2/MONITOR jacks You can connect an equal- izer in Monitor mode, or a video component in Video 2 mode. Record player OUT Setting up the system […]

• Страница 9

  9 Preparations Connecting video components Video Inputs (Yellow RCA pin cord) Video inputs and outputs (Yellow RCA pin cords) Setting up the system Video deck Monitor TV OUT Audio inputs and outputs VIDEO IN DVD player or LD player A video component with digital audio outputs should be connected to the VIDEO2 jacks. OUT OUT OUT IN IN *4967/01-/EN 3[…]

• Страница 10

  10 Preparations Connecting a DVD player (6-channel input) FRONT OUT L/R COAXIAL DIGITAL OUT (AUDIO) DVD player SURROUND OUT L/R VIDEO OUT (Yellow RCA pin cord) CENTER OUT SUBWOOFER OUT If you have connected a DVD player to the receiver with digital connection, be sure to read the «Input mode settings» section carefully. 7 Be sure to adher[…]

• Страница 11

  11 Preparations Digital connections COAXIAL DIGITAL OUT (AUDIO) Optical fiber cable Connect the video signal and analog audio signals to the VIDEO2/MONI- TOR jacks. (See «Connecting video compo- nents».) DOLBY DIGITAL RF OUT (AUDIO) COAXIAL DIGITAL OUT (AUDIO) LD player RF digital demodula- tor (DEM-9991D) (sold separately) PCM OUT CD pla[…]

• Страница 12

  12 Preparations Setting up the system Connecting the antennas AM antenna terminal connections 1 Push lever. 2 Insert cord. AM loop antenna The supplied loop antenna is used for indoors. Place it as far as possible from the receiver, TV set, speaker cords and power cord, and adjust the direction for best reception. 3 Return lever. AM loop antenna FM[…]

• Страница 13

  13 Preparations Connecting the system control SYSTEM CONTROL OPERATIONS Remote Control Lets you operate this unit with the system remote supplied with the receiver. Automatic Operation When you start playback from a source component, the input selector on this unit switches to that component automatically. Synchronized Recording Lets you synchroniz[…]

• Страница 14

  14 Preparations Operations Additional Informatiion Setting up the system • Never short circuit the + and – speaker cords. • If the left and right speakers are connected inversely or the speaker cords are connected with reversed polarity, the sound will be unnatural with ambiguous acoustic imaging. Be sure to connect the speakers correctly. Co[…]

• Страница 15

  15 Preparations Operations Additional Informatiion Speaker placement Subwoofer Front speakers : Place to the front left and right of the listening position. Front speakers are required for all surround modes. Center speaker : Place front and center. This speaker stabilizes the sound image and helps recreate sound motion. Be sure to connect a center[…]

• Страница 16

  16 Preparations Preparing for surround sound Speaker settings If you selected other than «LRG» as the center speaker setting. 1 SURR YES: Surround speakers are connected to the re- ceiver. 2 SURR NO: No surround speakers are connected to the receiver. 9 Press the SET UP key to accept the setting. • The receiver enters the speaker volume[…]

• Страница 17

  17 Operations Jot down the distance to each of the speakers. Distance to front speakers: ____ feet (meters) Distance to center speaker: ____ feet (meters) Distance to surround speakers: ____ feet (meters) 2 Use the MULTI CONTROL to select the distance to the front speakers. Input level adjustment (analog sources only) If the input level of an analo[…]

• Страница 18

  18 Operations Normal playback 1 Listening to a source component Adjusting the sound Adjusting the tone You can adjust the sound quality when the receiver is in the PCM stereo and analog stereo mode. 1 Press the SOUND key to select the tone mode to be adjusted. • The bass and treble levels are adjustable from -10 to +10 in 2 step increments. • T[…]

• Страница 19

  19 Operations Muting the sound The MUTE key lets you mute the sound of the speakers. Press the MUTE key. To cancel Press the MUTE key again so that the «MUTE» indicator goes off. • Muting can also be canceled by adjusting the volume. Blinks SOURCE DIRECT playback (analog sources only) Use this function to pass the source material direct[…]

• Страница 20

  20 Operations 1 Use the INPUT SELECTOR to select the source (CD, DVD or VIDEO2) you want to record. 2 Set the cassette deck to record. 3 Press and hold the DIMMER key for more than 2 seconds to select the A-REC or M-REC mode. 1 REC MODE off : The digital input record mode is switched off. 2 A-REC MODE : The digital input signals (Dolby Digital, or […]

• Страница 21

  21 Operations Listening to radio broadcasts 1 2 3 Each press switches the tuning method as follows: 4 Auto tuning : The next station is tuned automatically. Manual tuning : Turn the knob (press the key) to select the desired station. Each press switches the band as follows: 1 AUTO lit (auto tuning) 2 AUTO not lit (manual tuning) Frequency display &[…]

• Страница 22

  22 Operations Each press switches the display mode as follows: 1 PS (Program Service name) display 2 RT (Radio Text) display 3 Frequency display Using the RDS DISP . (Display) key 1 PS (Program Service name) display: The station name is displayed automatically when an RDS broadcast is received, If no PS data was sent, » NO PS » is display[…]

• Страница 23

  23 Operations Presetting radio stations manually • Repeat steps 1 , 2 , 3 , and 4 to store as many stations as necessary. • If you store a station at a previously used preset, the old station will be replaced by the new one. Press the MEMORY key while receiving the station. Proceed to step 3 within 5 seconds. (If more than 5 seconds elapse, pre[…]

• Страница 24

  24 Operations Listening to radio broadcasts 1 2 When an RDS broadcast is received, the program type is shown on the display. If no PTY data is available, or if the station is not an RDS station, » NONE » is displayed. Program type table T uning by program type (PTY search) This function lets you set the tuner to automatically search for s[…]

• Страница 25

  25 Operations Ambience effects This receiver is equipped with listening modes that allow you to enjoy an enhanced sonic ambience with a variety of video sources. In order to obtain the optimum effect from the surround modes, make sure to input the proper speaker settings beforehand. ^ Surround modes Dolby Digital The Dolby Digital surround format l[…]

• Страница 26

  26 Operations Ambience effects Surround Play DOLBY DIGITAL can be used when playing DVD or LD software bearing the mark and DOLBY DIGITAL format digital broadcasts (etc.). DOLBY PRO LOGIC and DOLBY 3 STEREO can be used when playing video, DVD, or LD software bearing the mark. • Turn ON related components. • Complete «Preparing for surround[…]

• Страница 27

  27 Operations Ambience effects DVD 6-channel playback Using a DVD player or the like equipped with six (5.1) output channels and the receiver, you can enjoy surround sound playback. When you try to play a disc other than Dolby Digital such as CD, no sound is produced or, noise may be heard. To avoid this situation, make sure that you connect the co[…]

• Страница 28

  28 Operations Ambience effects Display dimmer adjustment The dimmer function lets you select the brightness of the receiver’s display. You might find this useful if you darken your room to watch movies or listen to music. • The adjustment item is displayed for approximately 8 seconds. • Some Dolby Digital software may not be compatible wit[…]

• Страница 29

  29 Operations The remote control of this unit can control two groups of KENWOOD DVD players directly without using the remote control supplied with the DVD player. Group-1: DV-4900, DV-4070B, DV-2070, DV-203, DVF-9010, DVF-K7010, DVF-5010, DVF-R9030, DVF- R7030, DVF-3530 and DV-402 Group-2: DV-4050, DV-303, DVF-R6030, DVF-K5020, DVF-5020, DVF-3020 […]

• Страница 30

  30 Operations Refer to the following for the type of remote control operations available for each component. In order to perform these operations, the components must be connected to the system control jack. # CASSETTE deck, CD player & MD recorder operations Basic remote control operations for other components 1 Select the input source 2 Press[…]

• Страница 31

  31 Additional Informatiion Resetting the Microcomputer The microcomputer may malfunction (unit cannot be operated, or shows an erroneous display) if the power cord is unplugged while the power is ON, or due to some other external factor. If this happens, execute the following procedure to reset the microcomputer and return the unit to its normal op[…]

• Страница 32

  For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product. Model __________________ Serial Number ________________________ Caution : Read […]