Kt n828 универсальный пульт для кондиционеров инструкция

The KTN828 is designed to work with most air conditioners that require a remote control.

Note: Sliding the door panel on the front-bottom of the remote down will expose the rest of the

keys including the «SELECT» key used for programing. Also, take note of the numbers located

on the bottom left corner of each key. These keys are used for entering the codes. See section

below for programming using code input.

Install batteries

To install batteries, simply slide off the battery cover on the back of the remote. Please make

sure to install 2 AAA batteries, taking note of the polarity marks located in the compartment.

Programming using code input

1. Take note of the codes beside the brand of your AC in the code section of this manual.

2. Press the «SELECT» key, the code section on the screen will flash.

3. Enter the first 4-digit code beside your brand from the code section.

a. Remote should now operate AC, if it does not, please repeat from step 2 with the

next code from the code section.

b. After you find a code that is working try other function keys to see if they work. If

you feel that the other keys should be working, then you can try a different code

to see if there is a better code that works more fully.

Programming using auto-search

If you do not know the brand of your air conditioner, or if your brand is not listed in the code

table, please operate as per following steps:

1. Aim the remote control at your air conditioner during this whole process.

2. Press the «SELECT» key for 5 seconds and then release, remote control has entered

auto-search status. The remote is now sending codes continuously.

3. When AC responds, immediately press any key on the remote to save the current code

quickly.

4. Try other function keys to test to see if code works fully, if not, please repeat steps

above.

Intelligent Cooling & Intelligent Heating

In the summer, press the «Intelligent Cooling» only, the air conditioner will be cooled

immediately. In the winter, press the «Intelligent Heating» key only, the air conditioner will be

heated immediately. In both status, the air conditioner will let the heating and cooling in a

comfortable temperature automatically, and the fan and swing are all automatic. At the same

time, user can also adjust the temperature by «Temp.+/-» keys as needed.

Clock set up

1. Press the «CLOCK» key, clock signal flashes.

Anderic KTN828 Operating Manual

Название:

Артикул:

Текст:

Выберите категорию:

Производитель:

Новинка:

Спецпредложение:

Результатов на странице: