M one xl dual effects processor инструкция

Нужна помощь?

У вас есть вопрос о TC Electronic а ответа нет в руководстве? Задайте свой вопрос здесь Дай исчерпывающее описание проблемы и четко задайте свой вопрос. Чем детальнее описание проблемы или вопроса, тем легче будет другим пользователям TC Electronic предоставить вам исчерпывающий ответ.

Инструкция TC Electronic M-One XL доступно в русский?

The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the

presence of uninsulated «dangerous voltage» within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the literature accompanying the product.

1Read these instructions.

2Keep these instructions.

3Heed all warnings.

4Follow all instructions.

5Do not use this apparatus near water.

6Clean only with dry cloth.

7Do not block any ventilation openings.

Install in accordance with the manufacturer’s instructions.

8Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11Only use attachments/accessories specified by the manufacturer.

12Unplug this apparatus during lightning storms or when unused for long periods of time.

13Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Warning!

•To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

•This apparatus must be earthed.

•Use a three wire grounding type line cord like the one supplied with the product.

•Be advised that different operating voltages require the use of different types of line cord and attachment plugs.

•Check the voltage in your area and use the correct type. See table below:

Voltage Line plug according to standard

110-125V UL817 and CSA C22.2 no 42.

220-230V CEE 7 page VII, SR section

107-2-D1/IEC 83 page C4.

240V BS 1363 of 1984.

Specification for 13A fused plugs and switched and unswitched socket outlets.

•This equipment should be installed near the socket outlet and disconnection of the device should be easily accessible.

•Do not install in a confined space.

•Do not open the unit — risk of electric shock inside.

Caution:

You are cautioned that any change or modifications not expressly approved in this manual could void your authority to operate this equipment.

Service

•There are no user-serviceable parts inside.

•All service must be performed by qualified personnel.

EMC / EMI.

This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

For the customers in Canada:

This Class B digital apparatus complies with

Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Certificate Of Conformity

TC Electronic A/S, Sindalsvej 34, 8240

Risskov, Denmark, hereby declares on own responsibility that following products:

M•ONE — Dual Effects Processor &

M•ONE XL — Dual Effects Processor

— that is covered by this certificate and marked with CE-label conforms with following standards:

EN 60065 Safety requirements for mains

(IEC 60065) operated electronic and related apparatus for household and similar general use

EN 55103-1 Product family standard for audio,video, audio-visual and entertainment lighting control apparatus for professional use. Part 1: Emission.

EN 55103-2 Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use. Part 2: Immunity.

With reference to regulations in following directives:

73/23/EEC, 89/336/EEC

Issued in Risskov, 09 2001

Anders Fauerskov

Chief Executive Officer

INTRODUCTION

Important Safety Instructions

Table of contents . . . . . . . . . . . . . . . .3

Introduction . . . . . . . . . . . . . . . . . . . . .5

Front Panel . . . . . . . . . . . . . . . . . . . . .6

Rear Panel . . . . . . . . . . . . . . . . . . . . .8 Signal flow diagram &

Soldering Instructions . . . . . . . . . . . . .9

BASIC OPERATION

The M•ONE Display . . . . . . . . . . . . .10

I/O Setup . . . . . . . . . . . . . . . . . . . . .11

Clock Mismatch . . . . . . . . . . . . . . . . .11

Utility & MIDI . . . . . . . . . . . . . . . . . . .12

Routings . . . . . . . . . . . . . . . . . . . . . .13

Recall . . . . . . . . . . . . . . . . . . . . . . . .16

Edit . . . . . . . . . . . . . . . . . . . . . . . . . .16

Store . . . . . . . . . . . . . . . . . . . . . . . . .17

Tap . . . . . . . . . . . . . . . . . . . . . . . . .17

ALGORITHMS

Reverb

Hall . . . . . . . . . . . . . . . . . . . . . . . . . .18

Room . . . . . . . . . . . . . . . . . . . . . . . .19

Small Room . . . . . . . . . . . . . . . . . . .21

Plate 1 . . . . . . . . . . . . . . . . . . . . . . .22

Plate 2 . . . . . . . . . . . . . . . . . . . . . . .23

Spring . . . . . . . . . . . . . . . . . . . . . . . .24

Live . . . . . . . . . . . . . . . . . . . . . . . . .25

Ambience . . . . . . . . . . . . . . . . . . . . .26

Other Algorithms

Delay — One Tap & two Tap . . . . . . . .27 Delay — PingPong . . . . . . . . . . . . . . .28

Chorus — Classic & 4-Voice . . . . . . . .29

Flange — Classic & 4-Voice . . . . . . . .30 Pitch — Detune & Pitch Shift . . . . . . . .31 Parametric Equalizer . . . . . . . . . . . . .32 Compressor & Limiter . . . . . . . . . . . .33

Gate/Expander . . . . . . . . . . . . . . . . .34

De-esser . . . . . . . . . . . . . . . . . . . . . .35 Tremolo — Hard & Soft . . . . . . . . . . . .36 Phaser — Vintage & Smooth . . . . . . . .37

APPENDIX

MIDI Implementation Chart . . . . . . . .38

Technical Specifications . . . . . . . . . .39

Troubleshooting . . . . . . . . . . . . . . . .41

Preset List . . . . . . . . . . . . . . . . . . . .42

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK DO NOT EXPOSE THIS EQUIPMENT TO

RAIN OR MOISTURE

AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS

OUVRIR.

PROFESSIONAL AUDIO EQUIPMENT

THIS CLASS B DIGITAL DEVICE MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCECAUSING EQUIPMENT REGULATIONS AND COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION SUBJECT TO CONDITIONS STATED IN THE MANUAL.

SERIAL NO.

TYPE: MAN001 MADE IN THAILAND

TC ELECTRONIC

UL6500

EN/IEC 60065

C US

100-240VAC

50-60Hz, 15W

I/O Setup

Basic operation

•Press the I/O SETUP key to enter the global setup parameters of the M•ONE.

•Use the ARROW keys to select parameters

and the CONTROL wheel to change parameter values.

All changes in the I/O Setup menu are instantly effective.

Input Source

Analog

Select the Source parameter using the

ARROW keys.

The source display arrow is lit. Dial the

CONTROL wheel to select between Analog or Digital. When «Analog» is selected M•ONE automatically defaults to the internal 44.1kHz clock as Sample Rate and analog Input is lit in the display.

Digital

When «Digital» is selected the M•ONE attempts to lock to the S/PDIF Input. The incoming clock will be displayed by the 44.1 or 48kHz display icons and the Digital In icon will be lit. During the lock-up period the Digital In icon will be blinking indicating none or unacceptable clock, and the Outputs are muted. When «lock» is achieved the matching Clock Rate icon is lit, and the Outputs are un-muted.

ANLGLEFT (M•ONE XL only)

With this selection analog Input type is selected and the Left XLR Input connector must be used.

Clock

Analog Input

When Input source is analog the following

Sample Rates are available:

Internal 44.1kHz: The M•ONE runs at internal 44.1kHz.

Internal 48kHz: The M•ONE runs at internal 48kHz.

Digital: The M•ONE locks to the incoming Digital clock.

Digital Input

When Input Source is digital the M•ONE following Sample Rates are available: Internal 44.1kHz: The M•ONE runs at

internal 44.1kHz.

Internal 48kHz: The M•ONE runs at

***Rate Mismatch****

This Error message will occur in the

display if the M•ONE detects slipsamples. Typically this problem

only occurs in very special clock setups e.g. if the M•ONE is running via internal clock, while processing audio from the Digital Input. If the incoming clock and the internal clock do not match the M•ONE will display the above written error message.

Out Range

Range: 2dBu, 8dBu, 14dBu and 20dBu.

Sets the maximum Gain range of the analog Output stage.

Out level

Range: 0 to Off (-100dB) in 1dB increments.

Controlling the overall digital/analog Output level.

Digital In Gain

Sets the digital Input level. This level only affects the digital level.

Dither

Going from one type of bit resolution to a lower, e.g. from 24 bit to 16 bit, you actually loose 8 bits of information.

The process of cutting off bits is called truncation and it introduces digital distortion of low level signals, due to the lack of complete signal information. To compensate for this, dither must be applied. Dither is a small amount of filtered noise that generates randomization at the noise floor, ensuring a less distorted low level signal.

Dithering is relevant only on digital Outputs and it is always the receiving device that determines the number of bits you must dither to. A CDR or a DAT recorder should normally be dithered to 16 bit.

Utility

Basic operation

•Press the UTILITY key to enter the local setup parameters of the M•ONE.

•Use the ARROW keys to select parameters

and the CONTROL wheel to change parameter values.

All changes are instantly effective in the Utility menu.

MIDI Channel

Sets the responding MIDI channel of the

M•ONE.

Range: Off/1-16/Omni.

MIDI CC

Determines whether the M•ONE should respond to MIDI Continuous Controllers or not.

Range: On/Off.

MIDI Bulk Dump

Press ENTER to perform a Bulk Dump of all presets to an external MIDI device. The

M•ONE is always ready to receive MIDI Bulk

Dump information.

MIDI Sys-Ex ID

Determines the Sys-Ex ID number of the unit.

All effects parameters; algo changes and routings can be changed through MIDI Sys-Ex via an external MIDI device. In order to define which unit the sent MIDI Sys-Ex information should reach, the appropriate ID number must be set.

Program Bank

Determines which bank an external MIDI device will address in the M•ONE when sending a program change.

The options are: Factory, User or External. When External is selected controller #32 can be used to address either the Factory or the User bank.

Routing Lock

Locks the current Routing, meaning that the current selected routing will act as a “global routing” and that “preset routings” will not take effect when presets are recalled.

Tap Unit

Selects whether the Tapped tempo in the Tap menu should be displayed in ms (milliseconds) or BPM (Beats Per Minute).

Bypass Mode

There are three different Bypass modes:

0% Mix

The Input signal is passed directly to the

Output.

FX Input

Shuts off the Engine Input in order to let the effect «ring out», but leaves the same amount of dry signal through the unit.

FX Output

Shuts off the Engine Output in order to kill the

FX instantaneously, but leave the same amount of dry signal coming through.

Pedal setup

Sets the function of the back panel Pedal jack. The Pedal Input uses momentary switches only.

Range: Bypass 1, Bypass 2, Bypass 1&2, Tap.

Viewing Angle

Adjusts the LCD display backlight for better viewing comfort.