Магнитола jvc kd r707 инструкция

ENGLISHРУCCKИЙУКРАЇНА

CD RECEIVER

РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ

ПРИЙМАЧ З ПРОГРАВАЧЕМ КОМПАКТ-ДИСКІВ

For installation and connections, refer to the separate manual.

Указания по установке и выполнению соединений приводятся в отдельной инструкции.

Вказівки по встановленню та виконанню підключень наведені у окремій інструкції.

INSTRUCTIONS

ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ

ІНСТРУКЦІЇ

GET0597-001A

[EE]

For canceling the display demonstration, see page 7.

Информацию об отмене демонстрации функций дисплея см. на стр. 7.

Інформацію щодо відміни демонстрації функцій дисплею див. на стор. 7.

В соответствии с Законом Российской Федерации “О защите прав потре бителей” срок службы (годности) данного

товара “по истечении которого он может представлять опасность для жизни, здоровья потребителя, причинять вред

его имуществу или окружающей среде” составляет семь (7) лет со дня производства. Этот срок является временем, в

течение которого потребитель данного товара может безопасно им пользоваться при условии соблюдения

ин струк ции по эксплуатации данного товара, проводя необходимое обслуживание, включающее замену расходных

материалов и/или соответствующее ремонтное обеспечение в специализированном сервисном центре.

Дополнительные косметические материалы к данному товару, поставляе мые вместе с ним, могут храниться в

течение двух (2) лет со дня его производства.

Срок службы (годности), кроме срока хранения дополнительных космети ческих материалов, упомянутых в

предыдущих двух пунктах, не затрагивает никаких других прав потребителя, в частности, гарантийного свидетельства

JVC, которое он может получить в соответствии с законом о правах потребителя или других законов, связанных с ним.

EN, RU, UK

0109DTSMDTJEIN

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit

Затруднения при эксплуатации?

Пожалуйста, перезагрузите Ваше устройство

Для получения информации о перезагрузке Вашего устройства

обратитесь на соответствующую страницу

Маєте ПРОБЛЕМУ з функціонуванням?

Повторно налаштуйте систему

Див. сторінку “Як повторно налаштувати пристрій”

© 2009 Victor Company of Japan, Limited

Bіктор Компані оф Джепен Лімітед

12, 3-чоме, Морійя-чо, Канагава-ку, Йокогама, Канагава 221-8520, Японія

KD-R707

CoverRear_KD-R707[EE]_3.indd 1CoverRear_KD-R707[EE]_3.indd 1 23/1/09 12:00:51 PM23/1/09 12:00:51 PM

ENGLISH

2

This mark is used to indicate…

Turn the control dial to make a

selection, then press to confirm the

selection.

Warning:

If you need to operate the unit while driving, be sure to

look around carefully or you may be involved in a traffic

accident.

Caution on volume setting:

Digital devices (CD/USB) produce very little noise

compared with other sources. Lower the volume before

playing these digital sources to avoid damaging the

speakers by sudden increase of the output level.

For safety…

• Do not raise the volume level too much, as this will

block outside sounds, making driving dangerous.

• Stop the car before performing any complicated

operations.

Temperature inside the car…

If you have parked the car for a long time in hot or cold

weather, wait until the temperature in the car becomes

normal before operating the unit.

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best

possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to

qualified service personnel.

3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical

instruments.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

[European Union only]

Available characters on the display

Available characters

Display indications

EN02-11_KD-R707[EE]_3.indd 2EN02-11_KD-R707[EE]_3.indd 2 23/1/09 11:59:21 AM23/1/09 11:59:21 AM

ENGLISH

3

Detaching the control panel

Attaching the control panel

How to reset your unit

• Your preset adjustments will also be erased.

How to forcibly eject a disc

• “PLEASE” and “EJECT“ appear alternately on the

display.

• You can forcibly eject the loaded disc even if the disc is

locked. To lock/unlock the disc, see page 11.

• Be careful not to drop the disc when it ejects.

• If this does not work, reset your unit.

CONTENTS

Detaching the control panel ……………………. 3

Attaching the control panel ……………………. 3

How to reset your unit …………………………… 3

How to forcibly eject a disc ……………………… 3

OPERATIONS

Basic operations ……………………………………. 4

• Using the control panel …………………………. 4

• Using the remote controller (RM-RK50) …… 6

Preparation ………………………………………….. 7

Listening to the radio …………………………….. 8

Disc/USB operations ………………………………. 11

• Playing a disc ………………………………………. 11

• Playing a file on a USB device ………………… 11

• Disc/file operations ………………………………. 12

EXTERNAL DEVICES

Listening to the iPod/iPhone ………………….. 13

Listening to the other external

components ………………………………………. 15

SETTINGS

Selecting a preset sound mode ……………….. 16

Menu operations …………………………………… 17

Color settings ……………………………………….. 21

REFERENCES

More about this unit ……………………………… 22

Troubleshooting ……………………………………. 26

Maintenance ………………………………………… 29

Specifications ……………………………………….. 30

Avoid touching the connectors.

EN02-11_KD-R707[EE]_3.indd 3EN02-11_KD-R707[EE]_3.indd 3 23/1/09 11:59:26 AM23/1/09 11:59:26 AM

ENGLISH

4

Basic operations

Using the control panel

q • Return to the previous menu.

• USB-IPOD: Switch the setting between “HEAD

MODE” and “IPOD MODE” *

6

[Hold].

w Select the display and button illumination color.

e • Turn on the power.

• Attenuate the sound (if the power is on).

• Turn off the power [Hold].

r Remote sensor

t AUX (auxiliary) input jack

*

1

Also known as “Control dial” in this manual.

*

2

You cannot select these sources if they are not ready

or not connected.

*

3

When connecting the iPod/iPhone to the USB input

jack for the first time, “USB” appears on the display

first, then “USB-IPOD.”

*

4

You cannot select these sources if they were disabled

in the Menu (see “ SRC SELECT” in “Menu

operations” on page 20).

*

5

You can still adjust the volume during pause when

the selected source is CD/USB/USB-IPOD.

Before resume playback, check to be sure that you

have not raise the volume level too much.

*

6

You can use this function only when “IPOD

MODE” is available for the connected iPod (see

page 24).

1 • FM/AM/FM-LO: Select preset station.

• CD/USB: Select folder.

2 Select the source.

FM = CD *

2

= USB/USB-IPOD *

2,

*

3

=

AUX IN *

4

= AM *

4

= FM-LO = (back to the

beginning)

3 • Enter list operations.

• Enter Menu setting [Hold] .

• USB-IPOD: Enter the main menu.

4 • Control the volume *

5

or select items [Turn].

• Confirm the selection [Press].

• FM/FM-LO: Enter SSM preset mode [Hold].

• CD/USB/USB-IPOD: Pause/resume playback *

5

[Press].

• CD/USB/USB-IPOD: Enter playback mode

[Hold].

5 Display window

6 USB (Universal Serial Bus) input jack

7 • Activate/deactivate TA Standby Reception.

• Enter PTY Searching mode [Hold].

8 Change the display information.

9 Flip down the control panel.

• To eject the disc, flip down the control panel

then press 0 on the unit.

p • FM/AM/FM-LO: Search for station.

• CD/USB/USB-IPOD: Select track.

EN02-11_KD-R707[EE]_3.indd 4EN02-11_KD-R707[EE]_3.indd 4 23/1/09 11:59:27 AM23/1/09 11:59:27 AM

ENGLISH

5OPERATIONS

Display window

1 Tr (track) indicator

2 Source display / Track number / Folder number /

Time countdown indicator / Setting and list

operation information

3 USB indicator

4 iPod indicator

5 Playback mode / item indicators— RND (random),

(disc), (folder), RPT (repeat)

6 ST (stereo) indicator

7 LOUD (loudness) indicator

8 Radio Data System indicators—AF, REG, TP, PTY

9 Main display

p TAG (Tag information) indicator

q Disc/device information indicators— (track/

file), (folder)

w Menu hierarchy position indicator— (bottom),

(top), (middle)

EN02-11_KD-R707[EE]_3.indd 5EN02-11_KD-R707[EE]_3.indd 5 23/1/09 11:59:28 AM23/1/09 11:59:28 AM

ENGLISH

6

Using the remote controller (RM-RK50)

Installing the lithium coin battery (CR2025)

Caution:

• Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

• Battery shall not be exposed to excessive heat such as

sunshine, fire, or the like.

If the effectiveness of the remote controller

decreases, replace the battery.

Before using the remote controller:

• Aim the remote controller directly at the remote

sensor on the unit.

• DO NOT expose the remote sensor to bright light

(direct sunlight or artificial lighting).

Remote sensor

1 • Turns the power on if pressed briefly or

attenuates the sound when the power is on.

• Turns the power off if pressed and held.

2 • Changes the preset stations.

• Changes the folder of the MP3/WMA.

3 Adjusts the volume level.

4 Selects the sound mode.

5 Selects the source.

6 • Searches for stations if pressed briefly.

• Fast-forwards or reverses the track if pressed and

held.

• Changes the tracks if pressed briefly.

Warning (to prevent accidents and damage):

• Do not install any battery other than CR2025 or its

equivalent.

• Do not leave the remote controller in a place (such

as dashboards) exposed to direct sunlight for a long

time.

• Store the battery in a place where children cannot

reach.

• Do not recharge, short, disassemble, heat the battery,

or dispose of it in a fire.

• Do not leave the battery with other metallic

materials.

• Do not poke the battery with tweezers or similar

tools.

• Wrap the battery with tape and insulate when

throwing away or saving it.

EN02-11_KD-R707[EE]_3.indd 6EN02-11_KD-R707[EE]_3.indd 6 23/1/09 11:59:29 AM23/1/09 11:59:29 AM

ENGLISH

7OPERATIONS

Preparation

Canceling the display demonstration and setting the clock

• See also page 17.

1

Turn on the power.

2

[Turn] = [Press]

Cancel the display demonstrations

Select “DEMO,” then “DEMO OFF.”

Set the clock

Select “CLOCK” = “CLOCK SET.”

Adjust the hour, then press control dial once to proceed to

adjust the minute.

Select “24H/12H,” then “24 HOUR” or “12 HOUR.”

• To return to the previous menu, press BACK.

Changing the display information

When the power is turned off: The current clock time is displayed if “CLOCK DISP” is set to “CLOCK OFF,”

(see page 17).

When the power is turned on: The display information of the current source changes as follows:

FM/AM/FM-LO Station Frequency = Clock = (back to the beginning)

FM Radio Data

System

Station name (PS) = Station Frequency = Programme type (PTY) = Clock =

(back to the beginning)

CD

CD/USB/USB-IPOD

Audio CD/CD Text: Disc title/performer *

1

= Track title *

1

= Current track number

with the elapsed playing time = Current track number with the

clock time = (back to the beginning)

MP3/WMA: Album name/performer (folder name) *

2,

*

3

= Track title (file

name) *

2,

*

3

= Current track number with the elapsed playing

time = Current track number with the clock time = (back to

the beginning)

*

1

If the current disc is an audio CD, “NO NAME” appears.

*

2

If an MP3/WMA file does not have Tag information or “TAG DISPLAY” is set to “TAG OFF” (see page 18),

folder name and file name appear.

*

3

Not applicable for “USB-IPOD.”

Press and hold until the

main menu is called up.

• Repeat this procedure.

EN02-11_KD-R707[EE]_3.indd 7EN02-11_KD-R707[EE]_3.indd 7 23/1/09 11:59:30 AM23/1/09 11:59:30 AM

ENGLISH

8

Improving the FM reception

When an FM stereo broadcast is hard to receive,

activate monaural mode for better reception.

• Not applicable when the source is “FM-LO.”

• See also page 18.

Reception improves, but stereo effect will be lost.

To restore the stereo effect, repeat the same

procedure to select “MONO OFF.”

Storing stations in memory

Automatic presetting (FM/FM-LO)—

SSM (Strong-station Sequential Memory)

You can preset up to 12 stations for FM, and 6 stations

for FM-LO.

1 While listening to a station…

2 Select the preset number range you want to

store.

FM:

SSM 01–06, SSM 07–12

FM-LO:

SSM 01–06

3

Local FM stations with the strongest signals are

searched and stored automatically.

• To stop searching, press 4 /¢ .

To preset other 6 stations, repeat from step 1 again.

[Turn] = [Press]

Listening to the radio

1

Select “FM,” “AM,” or “FM-LO.”

2

Search for a station to listen—Auto Search.

When a station is tuned in, searching stops. To stop searching, press the same

button again.

• You can also search for a station manually—Manual Search. Hold either one

of the buttons until “M” flashes on the display, then press it repeatedly.

• When receiving an FM stereo broadcast with sufficient signal strength, the ST

indicator lights up on the display.

Note:

FM: 87.5 MHz – 108.0 MHz

FM-LO: 65.00 MHz – 74.00 MHz

EN02-11_KD-R707[EE]_4.indd 8EN02-11_KD-R707[EE]_4.indd 8 29/1/09 11:11:56 AM29/1/09 11:11:56 AM

ENGLISH

9OPERATIONS

Continued on the next page

Manual presetting (FM/AM/FM-LO)

You can preset up to 12 stations for FM, 6 stations for

FM-LO, and 6 stations for AM.

Ex.: Storing FM station of 92.50 MHz into preset

number “04.”

1

2 Select preset number “04.”

3

Selecting preset station

[Turn] = [Press]

The following features are available only for FM

Radio Data System stations.

Searching for FM Radio Data

System programme—PTY Search

You can tune in to a station broadcasting your favorite

programme by searching for a PTY code.

1 The last selected PTY code

appears.

2 Select one of your favorite programme types

or a PTY code.

3 Start searching for your favorite programme.

If a station is broadcasting a programme of the

same PTY code as you have selected, that station is

tuned in.

PTY codes

NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE,

SCIENCE, VARIED, POP M (music), ROCK M (music), EASY

M (music), LIGHT M (music), CLASSICS, OTHER M (music),

WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE

IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music),

OLDIES, FOLK M (music), DOCUMENT

or

EN02-11_KD-R707[EE]_4.indd 9EN02-11_KD-R707[EE]_4.indd 9 29/1/09 11:12:02 AM29/1/09 11:12:02 AM

ENGLISH

10

Using the standby receptions

TA Standby Reception

TA Standby Reception allows the unit to switch

temporarily to Traffic Announcement (TA) from any

source other than AM and FM-LO.

The volume changes to the preset TA volume level if the

current level is lower than the preset level (see

page 18).

To activate TA Standby Reception

The TP (Traffic Programme)

indicator either lights up or flashes.

• If the TP indicator lights up, TA Standby Reception is

activated.

• If the TP indicator flashes, TA Standby Reception is

not yet activated. (This occurs when you are listening

to an FM station without the Radio Data System

signals required for TA Standby Reception.)

To activate the reception, tune in to another station

providing these signals. The TP indicator will stop

flashing and remain lit.

To deactivate the TA Standby Reception

The TP indicator goes off.

PTY Standby Reception

PTY Standby Reception allows the unit to switch

temporarily to your favorite PTY programme from any

source other than AM and FM-LO.

To activate and select your favorite PTY code for

PTY Standby Reception, see page 18.

The PTY indicator either lights up or flashes.

• If the PTY indicator lights up, PTY Standby Reception

is activated.

• If the PTY indicator flashes, PTY Standby Reception is

not yet activated.

To activate the reception, tune in to another station

providing these signals. The PTY indicator will stop

flashing and remain lit.

To deactivate the PTY Standby Reception, select

“PTY OFF” for the PTY code (see page 18). The PTY

indicator goes off.

Tracing the same programme—

Network-Tracking Reception

When driving in an area where FM reception is not

sufficient enough, this unit automatically tunes in to

another FM Radio Data System station of the same

network, possibly broadcasting the same programme

with stronger signals (see the illustration below).

When shipped from the factory, Network-Tracking

Reception is activated.

To change the Network-Tracking Reception

setting, see “AF-REG” on page 18.

Programme A broadcasting on different frequency areas

(01 – 05)

Automatic station selection—

Programme Search

Usually when you select a preset number, the station

preset in that number is tuned in.

If the signals from the FM Radio Data System preset

station are not sufficient for good reception, this

unit, using the AF data, tunes in to another frequency

possibly broadcasting the same programme as the

original preset station is broadcasting.

• The unit takes some time to tune in to another

station using programme search.

• See also page 18.

EN02-11_KD-R707[EE]_3.indd 10EN02-11_KD-R707[EE]_3.indd 10 23/1/09 11:59:33 AM23/1/09 11:59:33 AM

ENGLISH

11OPERATIONS

Prohibiting disc ejection

To cancel the prohibition, repeat the same

procedure.

Disc/USB operations

Playing a disc

1

Turn on the power.

2

Insert a disc.

All tracks will be played repeatedly until you change

the source or eject the disc.

Stop playing and ejecting the disc

• “NO DISC” appears. Press SRC to listen to another

playback source.

Playing a file on a USB device

This unit can play MP3/WMA files stored on a USB mass storage class device.

You can connect a USB mass storage class device such as a USB memory, Digital Audio Player, portable HDD, etc. to

the unit.

• You can also connect an Apple iPod/iPhone to the USB input jack. For details of the operations, see pages 13

and 14.

1

Turn on the power.

2

Connect a USB.

All tracks will be played repeatedly until you change the

source or disconnect a device.

USB memory

Continued on the next page

EN02-11_KD-R707[EE]_3.indd 11EN02-11_KD-R707[EE]_3.indd 11 23/1/09 11:59:34 AM23/1/09 11:59:34 AM

ENGLISH

12 OPERATIONS

Pressing (or holding) the following buttons allows you

to…

[Press] Pause/resume playback.

MP3/WMA: Select folder

[Press] Select track

[Hold] Reverse/fast-forward track

Selecting a track/folder

• For MP3/WMA discs, select the desired folder,

then the desired track by repeating the control dial

procedures.

• To return to the previous menu, press BACK.

Selecting the playback modes

You can use only one of the following playback modes

at a time.

1

[Turn] = [Press]

Disc/file operations

If a USB device has been attached…

Playback starts from where it has been stopped

previously.

• If a different USB device is currently attached,

playback starts from the beginning.

Stop playing and detaching the USB device

Straightly pull it out from the unit.

• “NO USB” appears. Press SRC to listen to another

playback source.

Cautions:

• Avoid using the USB device if it might hinder your

safety driving.

• Do not pull out and attach the USB device repeatedly

while “READING” is shown on the display.

• Do not start the car engine if a USB device is

connected.

• This unit may not be able to play the files depending

on the type of USB device.

• Operation and power supply may not work as

intended for some USB devices.

• You cannot connect a computer to the USB input

terminal of the unit.

• Make sure all important data has been backed up to

avoid losing the data.

• Do not leave a USB device in the car, expose to direct

sunlight, or high temperature to avoid deformation

or cause damages to the device.

• Some USB devices may not work immediately after

you turn on the power.

• For more details about USB operations, see page 24.

EN12-17_KD-R707[EE]_3.indd 12EN12-17_KD-R707[EE]_3.indd 12 23/1/09 12:00:09 PM23/1/09 12:00:09 PM

ENGLISH

13OPERATIONS & EXTERNAL DEVICES

2

3

REPEAT Ô RANDOM

[Turn] = [Press]

[Turn] = [Press]

REPEAT

TRACK RPT : Repeats current track

FOLDER RPT : MP3/WMA: Repeats current

folder

RANDOM

FOLDER RND : MP3/WMA: Randomly plays

all tracks of current folder,

then tracks of next folders

ALL RND : Randomly plays all tracks

• To cancel repeat play or random play, select

“RPT OFF” or “RND OFF.”

• To return to the previous menu, press BACK.

Listening to the iPod/iPhone

There are 2 control terminals in “USB-IPOD” source.

• “HEAD MODE”: Control by this unit.

• “IPOD MODE”: Control by the connected iPod/iPhone.

Preparation: Select the controlling terminal, “HEAD MODE” or “IPOD MODE” for iPod playback:

• Press and hold BACK button.

• Make the selection from “IPOD SWITCH” setting, see page 20.

The operations explained below are under “HEAD MODE.”

1

Turn on the power.

2

Connect the iPod/iPhone using the USB 2.0

cable (supplied with the iPod/iPhone).

Playback starts automatically.

3

Select a song.

• Disconnecting the iPod/iPhone will stop playback. Press SRC to listen to another playback source.

• For details, refer also to the manual supplied with your iPod/iPhone.

Continued on the next page

USB 2.0 cable

iPod/

iPhone

EN12-17_KD-R707[EE]_3.indd 13EN12-17_KD-R707[EE]_3.indd 13 23/1/09 12:00:13 PM23/1/09 12:00:13 PM

ENGLISH

14

Caution:

• Avoid using the iPod/iPhone if it might hinder your

safety while driving.

• Make sure all important data has been backed up to

avoid losing the data.

Pressing (or holding) the following buttons allows you

to…

[Press] Pause/resume playback.

[Press] Select track

[Hold] Reverse/fast-forward track

Selecting a track from the menu

1 Enter the main menu.

2 Select the desired menu.

PLAYLISTS Ô ARTISTS Ô ALBUMS Ô

SONGS Ô PODCASTS ÔGENRES Ô

COMPOSERS Ô AUDIOBOOKS

3 Select the desired track.

• To return to the previous menu, press BACK.

[Turn] = [Press]

REPEAT Ô RANDOM

[Turn] = [Press]

[Turn] = [Press]

[Turn] = [Press]

Selecting the playback modes

1

2

3

REPEAT

ONE RPT : Functions the same as “Repeat

One” of the iPod.

ALL RPT : Functions the same as “Repeat

All” of the iPod.

RANDOM

ALBUM

RND

: Functions the same as “Shuffle

Albums” of the iPod.

SONG RND : Functions the same as “Shuffle

Songs” of the iPod.

• To cancel repeat play or random play, select “RPT

OFF” or “RND OFF.”

• “ALBUM RND” is not available for some iPod.

• To return to the previous menu, press BACK.

EN12-17_KD-R707[EE]_3.indd 14EN12-17_KD-R707[EE]_3.indd 14 23/1/09 12:00:14 PM23/1/09 12:00:14 PM

ENGLISH

15

EXTERNAL DEVICES

Listening to the other external components

You can connect an external component to AUX (auxiliary) input jack on the control panel.

Preparation: Make sure “AUX ON” is selected in the “SRC SELECT”

= “AUX IN” setting, see page 20.

1

Select “AUX IN.”

2

—

Turn on the connected component and start playing the source.

3

Adjust the volume.

4

—

Adjust the sound as you want (see page 16).

Connecting an external component to the AUX input jack

3.5 mm stereo mini plug

(not supplied)

Portable audio player, etc.

EN12-17_KD-R707[EE]_3.indd 15EN12-17_KD-R707[EE]_3.indd 15 23/1/09 12:00:15 PM23/1/09 12:00:15 PM

ENGLISH

16

4 Adjust the sound elements of the selected

tone.

1 Adjust the frequency.

2 Adjust the level.

3 Adjust the Q-slope.

Sound

elements

Range/selectable items

BASS MIDDLE TREBLE

Frequency 60 Hz

80 Hz

100 Hz

200 Hz

0.5 kHz

1.0 kHz

1.5 kHz

2.5 kHz

10.0 kHz

12.5 kHz

15.0 kHz

17.5 kHz

Level –06 to

+06

–06 to

+06

–06 to

+06

Q Q1.0

Q1.25

Q1.5

Q2.0

Q0.75

Q1.0

Q1.25

Fix

5 Repeat steps 3 and 4 to adjust other sound

characteristics.

The adjustment made will be stored automatically.

Storing your own sound mode

You can store your own adjustments in memory.

1 Select “USER.”

2 While “USER” is shown on the display…

3 Select a tone.

You can select a preset sound mode suitable to the music genre.

• See also page 17.

• See the following for “USER” settings.

Selecting a preset sound mode

[Turn] = [Press]

[Turn] = [Press]

[Turn] = [Press]

[Turn] = [Press]

EN12-17_KD-R707[EE]_3.indd 16EN12-17_KD-R707[EE]_3.indd 16 23/1/09 12:00:15 PM23/1/09 12:00:15 PM

ENGLISH

17

SETTINGS

Initial: Underlined

Menu operations

1 Call up the menu. 2 Select the desired item. 3 Repeat step 2 if necessary.

• To return to the previous menu,

press BACK.

• To exit from the menu, press

DISP or MENU.

Category

Menu items Selectable settings, [reference page]

DEMO

DEMO

Display

demonstration

• DEMO ON

• DEMO OFF

: Display demonstration will be activated automatically if

no operation is done for about 20 seconds, [7].

: Cancels.

CLOCK

CLOCK DISP *

1

Clock display

• CLOCK ON

• CLOCK OFF

: Clock time is shown on the display at all times when the

power is turned off.

: Cancels; pressing DISP will show the clock time for about

5 seconds when the power is turned off, [7].

CLOCK SET

Clock setting

: Adjust the hour, then the minute, [7].

(Initial: 0:00)

24H/12H

Time display mode

• 24 HOUR

• 12 HOUR

: See also page 7 for setting.

CLOCK ADJ *

2

Clock adjustment

• AUTO

• OFF

: The built-in clock is automatically adjusted using the CT

(clock time) data in the Radio Data System signal.

: Cancels.

EQ

EQ

Equalizer

: Select a preset sound mode suitable to the music genre.

USER, ROCK, CLASSIC, POPS, HIP HOP, JAZZ

DISPLAY

DIMMER

Dimmer

• DIMMER AUTO

• DIMMER ON

• DIMMER OFF

: Dims the display when you turn on the headlights. *

3

: Dims the display and button illumination.

: Cancels.

SCROLL*

4

Scroll

• SCROLL ONCE

• SCROLL AUTO

• SCROLL OFF

: Scrolls the displayed information once.

: Repeats scrolling (at 5-second intervals).

: Cancels.

Pressing DISP for more than one second can scroll the display regardless of the

setting.

*

1

If the power supply is not interrupted by turning off the ignition key of your car, it is recommended to select

“CLOCK OFF” to save the car’s battery.

*

2

Takes effect only when CT data is received.

*

3

The illumination control lead connection is required. (See “Installation/Connection Manual.”)

*

4

Some characters or symbols will not be shown correctly (or will be blanked) on the display.

[Turn] = [Press]

Continued on the next page

EN12-17_KD-R707[EE]_3.indd 17EN12-17_KD-R707[EE]_3.indd 17 23/1/09 12:00:16 PM23/1/09 12:00:16 PM

ENGLISH

18

Category

Menu items Selectable settings, [reference page]

DISPLAY

TAG DISPLAY

Tag display

• TAG ON

• TAG OFF

: Shows the Tag information while playing MP3/WMA

tracks.

: Cancels.

TUNER

AF-REG *

5

Alternative

frequency/

regionalization

reception

• AF ON

• AF-REG ON

• OFF

: When the currently received signals become weak, the

unit switches to another station (the programme may

differ from the one currently received), [10].

• The AF indicator lights up.

: When the currently received signals become weak, the

unit switches to another station broadcasting the same

programme.

• The AF and REG indicators light up.

: Cancels.

PTY-STANDBY *

5

PTY standby

PTY OFF, PTY

codes

: Activates PTY Standby Reception with one of the PTY

codes, [9].

TA VOLUME *

5

Traffic

announcement

volume

VOLUME 00

– VOLUME 50

(or VOLUME 00

– VOLUME 30)*

6

: (Initial: VOLUME 15)

P-SEARCH *

5

Programme search

• SEARCH ON

• SEARCH OFF

: Activates Programme Search, [10].

: Cancels.

MONO *

7

Monaural mode

• MONO ON

• MONO OFF

: Activate monaural mode to improve FM reception, but

stereo effect will be lost, [8].

: Restore the stereo effect.

IF BAND

Intermediate

frequency band

• AUTO

• WIDE

: Increases the tuner selectivity to reduce interference

noises between adjacent stations. (Stereo effect may be

lost.)

: Subject to interference noises from adjacent stations, but

sound quality will not be degraded and the stereo effect

will remain.

COLOR

COLOR 01

— COLOR 29,

USER

: Select one of the preset or user color for display and button (except T/P/DISP/

OPEN/ ) illumination.

(For customized color settings, “USER,” see page 21.)

*

5

Only for FM Radio Data System stations.

*

6

Depends on the amplifier gain control.

*

7

Displayed only when the source is “FM.”

EN18-25_KD-R707[EE]_3.indd 18EN18-25_KD-R707[EE]_3.indd 18 23/1/09 11:58:52 AM23/1/09 11:58:52 AM

ENGLISH

19

SETTINGS

Category

Menu items Selectable settings, [reference page]

MENU

COLOR

MENU COLOR

Menu color

• ON

• OFF

: Changes the display and button (except T/P/DISP/

OPEN/ ) illumination during menu, list search and

playback mode operations.

: Cancels.

AUDIO

FADER *

8,

*

9

Fader

R06 – F06 : Adjust the front and rear speaker output balance.

(Initial: 00)

BALANCE *

9

Balance

L06 – R06 : Adjust the left and right speaker output balance.

(Initial: 00)

LOUD

Loudness

• LOUD ON

• LOUD OFF

: Boost low and high frequencies to produce a

well-balanced sound at a low volume level.

: Cancels.

VOL ADJUST

Volume adjust

VOL ADJ –05 —

VOL ADJ +05

(Initial: VOL ADJ

00)

: Preset the volume adjustment level of each source

(except FM), compared to the FM volume level. The

volume level will automatically increase or decrease

when you change the source.

• Before making an adjustment, select the source you

want to adjust.

• “VOL ADJ FIX” appears on the display if “FM/FM-LO” is

selected as the source.

L/O MODE

Line output mode

• SUB.W

• REAR

: Select if the REAR LINE OUT terminals are used for

connecting a subwoofer (through an external amplifier).

: Select if the REAR LINE OUT terminals are used for

connecting the speakers (through an external amplifier).

SUB.W FREQ *

10

Subwoofer cutoff

frequency

• LOW

• MID

• HIGH

: Frequencies lower than 72 Hz are sent to the subwoofer.

: Frequencies lower than 111 Hz are sent to the subwoofer.

: Frequencies lower than 157 Hz are sent to the subwoofer.

SUB.W LEVEL *

10

Subwoofer level

SUB.W 00

— SUB.W 08

: Adjust the subwoofer output level.

(Initial: SUB.W 04)

*

8

If you are using a two-speaker system, set the fader level to “00.”

*

9

This adjustment will not affect the subwoofer output.

*

10

Displayed only when “L/O MODE” is set to “SUB.W.”

Continued on the next page

EN18-25_KD-R707[EE]_3.indd 19EN18-25_KD-R707[EE]_3.indd 19 23/1/09 11:58:57 AM23/1/09 11:58:57 AM

ENGLISH

20

Category

Menu items Selectable settings, [reference page]

AUDIO

BEEP

Key touch tone

• BEEP ON

• BEEP OFF

: Activates the key touch tone.

: Deactivates the key touch tone.

TEL MUTING

Telephone muting

• MUTING 1/

MUTING 2

• MUTING OFF

: Select either one which mutes the sounds while using a

cellular phone.

: Cancels.

AMP GAIN *

11

Amplifier gain

control

• LOW POWER

• HIGH POWER

: VOLUME 00 – VOLUME 30 (Select if the maximum power

of each speaker is less than 50 W to prevent damaging

the speaker.)

: VOLUME 00 – VOLUME 50

SRC SELECT

AM *

12

AM station

• AM ON

• AM OFF

: Enable “AM” in source selection, [4].

: Disable “AM” in source selection.

AUX IN *

13

Auxiliary input

• AUX ON

• AUX OFF

: Enable “AUX IN” in source selection, [4].

: Disable “AUX IN” in source selection.

AUDIOBOOKS

AUDIOBOOKS *

14

Speed control of

“Audiobooks”

• NORMAL

• FASTER

• SLOWER

: You can select the playback speed of the “Audiobooks”

sound file in your iPod/iPhone.

• Initial selected item depends on your iPod/iPhone setting.

IPOD

SWITCH

IPOD SWITCH *

15

iPod/iPhone control

• HEAD MODE

• IPOD MODE

: Controls iPod playback through the unit.

: Controls iPod playback through the iPod/iPhone.

*

11

The volume level automatically changes to “VOLUME 30” if you change to “LOW POWER” with the volume level

set higher than “VOLUME 30.”

*

12

Displayed only when any source other than “AM” is selected.

*

13

Displayed only when any source other than “AUX IN” is selected.

*

14

Displayed only when an iPod/iPhone playback is controlled from the unit.

*

15

Displayed only when “USB-IPOD” is selected as the source and “IPOD MODE” is available for the connected iPod/

iPhone (see page 24).

EN18-25_KD-R707[EE]_3.indd 20EN18-25_KD-R707[EE]_3.indd 20 23/1/09 11:58:58 AM23/1/09 11:58:58 AM

2

3

4

OPERATIONS 5

6

OPERATIONS 7

8

Continued on the next page

OPERATIONS 9

10

Continued on the next page

OPERATIONS 11

12 OPERATIONS

OPERATIONS & EXTERNAL DEVICES 13

EXTERNAL DEVICES 15

16

SETTINGS 17

18

SETTINGS 19

20

SETTINGS 21

22

Continued on the next page

REFERENCES 23

24

REFERENCES 25

26

REFERENCES 27

28