Магнитола пионер mvh 09ubg инструкция

Программное обеспечение

Руководства

H:PDF-OUT12707500725110COV_KM686UW.fm

_127075007251_artwork.book Page 1 Thursday, November 24, 2016 10:34 AM

DIGITAL MEDIA RECEIVER ЦИФРОВОЙ МЕДИАРЕСИВЕР

About this manual:

•In the following instructions, a USB memory or USB audio player are referred to as “USB device”.

Before You Start

Thank you for purchasing this PIONEER product

To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference.

If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one).

For countries not mentioned above, please contact your local authorities for the correct method of disposal.

By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.

WARNING

•Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards.

•Do not attempt to operate the unit while driving. Make sure to pull off the road and park your vehicle in a safe location before attempting to use the controls on the device.

•Keep the front panel out of direct sunlight and high temperatures.

•Always store the detached front panel in a protective case or bag.

Setup menu

When you turn the ignition switch to ON after installation, [SET UP :YES] appears in the display.

1Press the M.C. dial.

The setup menu disappears after 30 seconds of no operation. If you prefer not to set at this time, turn the M.C. dial to select [NO], then press to confirm.

2Turn the M.C. dial to select the options, then press to confirm.

To proceed to the next menu option, you need to confirm your selection.

3[QUIT :YES] appears when all the settings have been made.

To return to the first item of the setup menu, turn the M.C. dial to select [QUIT :NO], then press to confirm.

4 Press the M.C. dial to confirm the settings.

NOTES

•You can cancel the menu setting by pressing SRC/OFF.

•These settings can be made at any time from the SYSTEM settings (page and INITIAL settings (page 4).

4 En

Canceling the demonstration display (DEMO OFF)

1 Press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select [SYSTEM], then press to confirm.

3 Turn the M.C. dial to select [DEMO OFF], then press to confirm.

4 Turn the M.C. dial to select [YES], then press to confirm.

INITIAL settings

1 Press and hold SRC/OFF until the unit turns off.

2 Press the M.C. dial to display the main menu.

3 Turn the M.C. dial to select [INITIAL], then press to confirm.

4 Turn the M.C. dial to select an option, then press to confirm.

NOTE

The options vary depending on the unit.

MVH-09UB/MVH-09UBG 127075007251

Radio

The RDS (radio data system) function only works in areas that broadcast RDS signals for FM stations.

Receiving preset stations

3 Press a number button (1/ to 6/ ).

TIP

The / buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the FUNCTION settings (page 7).

Best stations memory (BSM)

The six strongest stations are stored on the number buttons (1/ to 6/ ).

1 After selecting the band, press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select [FUNCTION], then press to confirm.

3 Turn the M.C. dial to select [BSM], then press to confirm.

To seek a station manually

1After selecting the band, press / to select a station.

Press and hold / then release to seek an available station. Scanning stops when the unit receives a station. To cancel seek tuning, press / .

NOTE

[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 7).

To store stations manually

1While receiving the station you want to store, press and hold one of the number buttons (1/ to 6/ ) until it stops flashing.

1 Press SRC/OFF to select [RADIO].

2Press BAND/DIMMER to select the band from [F1], [FM2], [FM3], [MW] or [LW].

TIP

F1 is for advanced FM band.

USB/AUX

Playing back

Disconnect headphones from the device before connecting it to the unit.

En 5

MVH-09UB/MVH-09UBG 127075007251

NOTE

Some Android devices connected via AOA 2.0 may not work properly or emit sounds due to their own software design, regardless of the OS version.

Basic operations

USB devices (including Android)

1 Open the USB port cover.

2 Plug in the USB.

NOTE

To automatically switch to [USB] source when a USB device is connected to the unit, set [USB AUTO] to [ON] in the SYSTEM settings (page 9).

CAUTION

Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device connected directly to the unit will protrude out from the unit, which could be dangerous.

Before removing the device, stop playback.

AOA connections

A device installed with Android OS 5.0 or later can be connected to the unit via AOA, using the cable supplied with the device.

AUX

1 Insert the stereo mini plug into the AUX input jack.

2 Press SRC/OFF to select [AUX] as the source.

NOTE

If [AUX] is set to [OFF] in the SYSTEM settings, [AUX] cannot be selected as a source (page 8).

Operations

You can make various adjustments in the FUNCTION settings (page 7).

Note that the following operations do not work for an AUX device. To operate an AUX device, use the device itself.

* Compressed audio files only

Settings

You can adjust various settings in the main menu.

1 Press the M.C. dial to display the main menu.

2Turn the M.C. dial to select one of the categories below, then press to confirm.

•FUNCTION settings (page 7)

•AUDIO settings (page 7)

•SYSTEM settings (page

3 Turn the M.C. dial to select the options, then press to confirm.

FUNCTION settings

The menu items vary according to the source.

AUDIO settings

En 7

_127075007251_artwork.book Page 8 Thursday, November 24, 2016

Select an equalizer band and level for further customizing.

Equalizer band: [80HZ], [250HZ], [800HZ], [2.5KHZ], [8KHZ]

Equalizer level: [+6] to [–6]

8 En

10:34 AM

*1 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings (page 5).

*2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings (page 5).

*3 Not available when [OFF] is selected in [SUB.W].

SYSTEM settings

You can also access to these menus when the unit is turned off.

Connections/Installation

Green/black

Violet

Violet/black

Black (chassis ground) Connect to a clean, paint-free metal location.

Yellow

Connect to the constant 12 V supply terminal.

Red

Connect to terminal controlled by the ignition switch (12 V DC).

Blue/white

Connect to the system control terminal of the power amp or autoantenna relay control terminal (max. 300 mA 12 V DC).

Subwoofer (4 Ω)

When using a subwoofer of 2 Ω, be sure to connect the subwoofer to the violet and violet/black leads of this unit. Do not connect anything to the green and green/black leads.

Not used. Subwoofer (4 Ω) × 2

NOTE

Change the initial menu of this unit. Refer to [SP-P/O MODE] (page 5). The subwoofer output of this unit is monaural.

Power amp (sold separately)

Perform these connections when using the optional amplifier.

MVH-09UB/MVH-09UBG 127075007251

System remote control Connect to blue/white cable.

Power amp (sold separately)

Connect with RCA cables (sold separately)

To rear output or subwoofer output Rear speaker or subwoofer

Installation

Important

•Check all connections and systems before final installation.

•Do not use unauthorized parts as this may cause malfunctions.

•Consult your dealer if installation requires drilling of holes or other modifications to the vehicle.

•Do not install this unit where:

–it may interfere with operation of the vehicle.

–it may cause injury to a passenger as a result of a sudden stop.

•Optimum

performance is obtained when the unit is installed at an angle of less than 60°.

•When installing, to ensure proper heat dispersal when using this unit, make sure you leave ample space behind the rear panel and wrap any

loose cables so they are not blocking the vents.

Leave ample 5 cm space

5 cm

DIN mount installation

1Insert the supplied mounting sleeve into the dashboard.

2Secure the mounting sleeve by using a screwdriver to bend the metal tabs (90°) into place.

Dashboard

Mounting sleeve

•Make sure that the unit is installed securely in place. An unstable installation may cause skipping or other malfunctions.

When not using the supplied mounting sleeve

1Line up the holes on the mounting bracket with the holes on the sides of the unit to attach the bracket.

En 11

Software & Firmware Downloads

Manuals