Maximus vii hero инструкция на русском

Версия E9799
13.32 MB

MAXIMUS VII HERO user’s manual(English)

Версия G9799
10.11 MB

MAXIMUS VII HERO User’s manual (German)

Версия E10276
91.95 KB

HDMI insert (English)

Версия F9799
8.8 MB

MAXIMUS VII Hero User’s Manual (French)

Версия J9192
10.24 MB

MAXIMUS VII HERO User’s Manual (Japanese)

Версия E9192
17.55 MB

MAXIMUS VII HERO User’s Manual (English)

Версия T9192
13.5 MB

MAXIMUS VII HERO User’s Manual(Traditional Chinese)

Версия C9192
13.49 MB

MAXIMUS VII HERO User’s Manual (Simplified Chinese)

1. Manuals
2. Brands
3. Asus Manuals
4. Motherboard
5. Maximus VII Hero
6. Manual

Quick Links

• Page 1
  MAXIMUS VII HERO…
• Page 2
  Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

• Page 3: Table Of Contents

  Contents Safety information …………………. vi About this guide ………………….vii MAXIMUS VII HERO specifications summary…………ix Package contents ………………… xiii Installation tools and components …………….. xiv Chapter 1: Product Introduction Special features………………1-1 1.1.1 Product highlights……………. 1-1 1.1.2 ROG Gaming Features …………… 1-3 1.1.3…

• Page 4
  3.6.10 ROG Effects …………….3-40 Monitor menu ………………. 3-41 Boot menu ………………..3-44 Tool menu ………………..3-50 3.9.1 ASUS EZ Flash 2 Utility …………3-50 3.9.2 ROG Secure Erase …………..3-50 3.9.3 Graphics Card Information …………3-52 3.9.4 ASUS Overclocking Profile …………3-52 3.9.5…
• Page 5
  Dual Intelligent Processors 5 …………..4-6 ROG Audio features …………….. 4-22 Sonic Radar II ………………. 4-28 GameFirst III ………………… 4-30 KeyBot………………….. 4-33 4.10 ASUS Media Streamer …………….4-35 4.11 ASUS Disk Unlocker …………….4-37 4.12 RAMDisk ………………..4-38 4.13 MemTweakIt ………………..4-41 4.14…

• Page 6: Safety Information

  Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.

• Page 7: About This Guide

  Refer to the following sources for additional information and for product and software updates. ASUS website The ASUS website (www.asus.com) provides updated information on ASUS hardware and software products. Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer.

• Page 8
  Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task IMPORTANT: Instructions that you MUST follow to complete a task.

• Page 9: Maximus Vii Hero Specifications Summary

  Turbo Boost Technology 2.0 ® * The Intel Turbo Boost Technology 2.0 support depends on the CPU ® types. * Refer to www.asus.com for Intel CPU support list Intel Z97 Express Chipset Chipset ® Dual channel memory architecture 4 x DIMM, max. 32GB, DDR3 3200 (O.C.) / 3100 (O.C.) / 3000 (O.C.) / 2933 (O.C.) / 2800 (O.C.) / 2666 (O.C.) / 2600 (O.C.) / 2500…

• Page 10
  6 x USB 3.0 ports (4 ports at back panel [blue], 2 ports at mid-board [red])* 7 x USB 2.0 ports (2 ports at back panel, 5 ports at mid-board)** * Supports ASUS USB 3.0 Boost, UASP standard on the Intel native ®…
• Page 11
  — ASUS EZ Flash 2 — ASUS C.P.R. (CPU Parameter Recall) MemOK! ASUS Q-Design — ASUS Q-Code — ASUS Q-Shield — ASUS Q-Connector — ASUS Q-LED (CPU, DRAM, VGA, Boot Device LED) — ASUS Q-Slot — ASUS Q-DIMM (continued on the next page)
• Page 12
  MAXIMUS VII HERO specifications summary 1 x USB 3.0 connector (supports additional two USB 3.0 ports) 3 x USB 2.0 connectors (support additional five USB 2.0 ports, one connector shares with ROG_EXT header) 1 x ROG Extension (ROG_EXT) header 8 x SATA 6Gb/s connectors…

• Page 13: Package Contents

  Package contents Check your motherboard package for the following items. ROG MAXIMUS VII HERO Motherboard 3 x 2-in-1 SATA 6 Gb/s cables Cables 1 x SLI bridge ® 1 x I/O Shield 1 x 12-in-1 ROG cable label Accessories 1 x 2-in-1 Q-Connector kit…

• Page 14: Installation Tools And Components

  Installation tools and components 1 bag of screws Philips (cross) screwdriver PC chassis Power supply unit Intel LGA 1150 CPU Intel LGA 1150 compatible CPU Fan DDR3 DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card (optional) The tools and components in the table above are not included in the motherboard package.

• Page 15: Chapter 1: Product Introduction

  This motherboard features a unique PCIe 3.0 bridge chip to support multi-GPU SLI ® ™ CrossFireX graphics cards for an unrivalled gaming performance. With the Intel ® platform to optimize the PCIe allocation of multiple GPUs, it supports up to 2-WAY GPU SLI ® ™ or CrossFireX configuration. ASUS MAXIMUS VII HERO…

• Page 16
  M.2 Support This motherboard features the M.2 slot, which shares bandwidth with PCIe x2 slot to speed up data transfer up to 10 Gb/s. This helps enhance the performance of your Solid State Drive (SSD) that is dedicated only to the operating system. The M.2 slot provides support for faster access to data and applications, and quicker wake up time for your system.

• Page 17: Rog Gaming Features

  GameFirst III ASUS GameFirst III is a network management software that features four preset packet prioritized profiles (Optimization, Game, Media Streaming and File Sharing) facilitating user’s need. Users can also manually allocate bandwidth and adjust priority settings of each application to run faster and smoother.

• Page 18: Rog Exclusive Features

  ASUS Special Features AI Suite 3 With its user-friendly interface, ASUS AI Suite 3 consolidates all the exclusive ASUS features into one simple-to-use software package. It allows you to supervise fan speed control, voltage and sensor readings. This all-in-one software offers diverse and ease to use functions, with no need to switch back and forth between different utilities.

• Page 19: Rog Rich Bundled Software

  Consumers can connect their PC to a home theatre system. DTS Interactive is capable of performing multichannel encoding of DTS bitstreams on personal computers, and sending encoded bitstreams out of a digital audio connection (such as S/PDIF or HDMI) designed to deliver audio to an external decoder. ASUS MAXIMUS VII HERO…

• Page 20: Motherboard Overview

  Motherboard overview 1.2.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.

• Page 21: Motherboard Layout

  1.2.2 Motherboard layout Refer to Internal connectors and Rear I/O connection for more information about rear panel connectors and internal connectors. ASUS MAXIMUS VII HERO…

• Page 22
  Layout contents Connectors/Jumpers/Buttons and switches/Slots Page 1. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V) 1-44 2. LGA1150 CPU Socket 3. CPU, chassis, and optional fan connectors (4-pin CPU_FAN; 1-43 4-pin CPU_OPT; 4-pin CHA_FAN1-4) 4. DDR3 DIMM slots 1-10 5. Q_Code LEDs 1-33 6.

• Page 23: Central Processing Unit (Cpu)

  Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/ transit-related.

• Page 24: System Memory

  1.2.4 System memory The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) slots. A DDR3 module is notched differently from a DDR or DDR2 module. DO NOT install a DDR or DDR2 memory module to the DDR3 slot. Recommended memory configurations Chapter 1: Product introduction 1-10…

• Page 25
  3.4 Extreme Tweaker menu for manual memory frequency adjustment. • For system stability, use a more efficient memory cooling system to support a full memory load (4 DIMMs) or overclocking condition. ASUS MAXIMUS VII HERO 1-11…
• Page 26
  MAXIMUS VII HERO Motherboard Qualified Vendors Lists (QVL) DDR3 3200 MHz capability DIMM socket support Chip Chip Vendors Part No. Size Timing Voltage (Optional) Brand AVEXIR AVD3UH32001304G- 16GB (4x 4GB) 13-15-15-35 1.65V • • 4CI(XMP) G.SKILL F3-3200C12Q- 16GB (4x 4GB) 12-15-15-35 1.65V…
• Page 27
  KINGSTON KHX26C11T2K2/8X(XMP) 8GB (2x 4GB) 2666-11-13- 1.65 • 13-32 DDR3 2500 MHz capability DIMM socket support Chip Chip Vendors Part No. Size Timing Voltage (Optional) Brand G.SKILL F3-20000CL10Q-16GBZHD(XMP) 16GB (4x 4GB) 10-11-11-31 1.65 • • ASUS MAXIMUS VII HERO 1-13…
• Page 28
  DDR3 2400 MHz capability DIMM socket support Chip Chip Vendors Part No. Size SS/DS Timing Voltage (Optional) Brand A-DATA AX3U2400W4G11-DMV(XMP) 8GB (2x 4GB) 11-13-13-35 1.65 • • A-DATA AX3U2400W8G11-DMV(XMP) 16GB (2x 8GB) 11-13-13-35 1.65 • • Apacer 78.BAGFL.AFD0C(XMP) 8GB (2x 4GB) 11-12-12-30 •…
• Page 29
  Part No. Size Chip NO. Timing Voltage (Optional) Brand AEXEA AXA3ES4GK2000LG28V(XMP) 4GB (2x 1.65 • • 2GB ) Asint SLA302G08-ML2HB(XMP) Hynix H5TQ2G83BFRH9C 9-9-9-27 • • GEIL GUP34GB2000C9DC(XMP) 4GB (2x 9-9-9-28 1.65 • • 2GB ) ASUS MAXIMUS VII HERO 1-15…
• Page 30
  DDR3 1866 MHz capability DIMM socket support Chip Chip Vendors Part No. Size Timing Voltage (Optional) Brand CORSAIR CMD16GX3M2A1866C9 (Ver5.29) 16GB (2x 8GB) 1866 9-9-9-27 • (XMP) CORSAIR CMD16GX3M4A1866C9 (Ver4.13) 16GB (4x 4GB) 9-10-9-27 • • (XMP) CORSAIR CMD16GX3M4A1866C9 (Ver8.16) 16GB (4x 4GB) 9-10-9-27 •…
• Page 31
  302G08-GN1C • • Asint SLA304G08-ENG1B Asint 304G08-GN1B 9-11- • • 11-28 Asint SLB304G08- 9-9-9- • • EGJ1B(XMP) Asint SLB304G08-EGN1B ASint 304G08-GN1B • • SLZ302G08- ASint 302G08- • • EGN1C GN1C (continued on the next page) ASUS MAXIMUS VII HERO 1-17…
• Page 32
  DDR3 1600 MHz capability DIMM socket support Vendors Part No. Size SS/DS Chip Brand Chip NO. Timing Voltage (Optional) AVD3U16000904G-2CW(XMP) 8GB (2x 11-11- • • 4GB) 11-28 CMD16GX3M2A1600C9 (Ver8.21) 16GB (2x 9-9-9-24 • (XMP) 8GB) CMD8GX3M2A1600C8 (Ver5.12) 8GB (2x 1600 8-8- •…
• Page 33
  4GB) KHX16C10B1K2/16X(XMP) 16GB • • 8GB) KHX16C9K2/16 16GB 1333- • • 9-9-9- 8GB) KHX16C9P1K2/16 16GB • • 8GB) KVR16N11/4 KINGSTON D2568JPUCPGGBU 11-11- • • 11-28-1 KVR16N11/4 Hynix H5TQ2G83CFRPBC • • (continued on the next page) ASUS MAXIMUS VII HERO 1-19…
• Page 34
  DDR3 1600 MHz capability DIMM socket support Part Vendors Size SS/DS Chip Brand Chip NO. Timing Voltage (Optional) MT16JTF1G64AZ-1G6D1 MICRON D9PBC • MT16JTF1G64AZ-1G6E1 Micron D9QBJ • • MT16KTF51264AZ-1G6M1 MICRON D9PFJ 11-11-11-28 • MT16KTF51264AZ-1G6M1 MICRON D9PFJ • MT8JTF51264AZ-1G6E1 Micron D9QBJ • •…
• Page 35
  D3 128M8CE9 2GB 9-9-9-24 • • (2x2GB) G.SKILL F3-10666CL9D-8GBRL 9-9-9-24 • • (2x4GB) G.SKILL F3-10666CL9D-8GBRL 9-9-9-24 • • (2x4GB) G.SKILL F3-10666CL9D-8GBXL 9-9-9-24 • • (2x4GB) GEIL GET316GB1333C9QC 16GB 9-9-9-24 • • (4x4GB) (continued on the next page) ASUS MAXIMUS VII HERO 1-21…
• Page 36
  DDR3 1333 MHz capability DIMM socket support Vendors Part No. Size Chip Brand Chip NO. Timing Voltage (Optional) GEIL GG34GB1333C9DC GEIL GL1L128M88BA115FW 9-9-9-24 • • (2x2GB) GEIL GG34GB1333C9DC GEIL GL1L128M88BA15B 9-9-9-24 • • (2x2GB) GEIL GVP34GB1333C9DC 9-9-9-24 • • (2x2GB) GEIL GVP38GB1333C7QC 7-7-7-24…
• Page 37
  ASUS exclusively provides hyper DIMM support function. • Hyper DIMM support is subject to the physical characteristics of individual CPUs. Load the X.M.P. settings in the BIOS for the hyper DIMM support. • Visit the ASUS website for the latest QVL. ASUS MAXIMUS VII HERO 1-23…

• Page 38: Expansion Slots

  1.2.5 Expansion slots Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Slot No. Slot Description PCIe 2.0 x1_1 slot PCIe 3.0/2.0 x16/x8_1 slot PCIe 2.0 x1_2 slot PCIe 3.0/2.0 x8_2 slot PCIe 2.0 x1_3 slot PCIe 2.0 x4_3 slot…

• Page 39
  Connect a chassis fan to the motherboard connector labeled CHA_FAN1-4 when using multiple graphics cards for better thermal environment. • New 4th and 5th generation Intel ® Core™ processors support PCIe 3.0 speed rate. PCIe_x16/x8_1 slot switches to x8 mode when PCIe_x8_2 slots are occupied. ASUS MAXIMUS VII HERO 1-25…
• Page 40
  PCIe operating mode Modes Motherboard Layout PCIe PCIe Auto – – – – PCIEX1_1 – – – PCIE_X16/X8_1 – – – – – PCIEX1_2 – – – PCIE_X8_2 – – – – – PCIEX1_3 – – – PCIEX4_3 • There are two possible scenarios in Auto Mode: By default, PCIeX4_3 slot runs at X1 mode with all slots enabled and the M.2 connector is disabled.

• Page 41: Onboard Buttons

  The button also lights up when the system is plugged to a power source indicating that you should shut down the system and unplug the power cable before removing or installing any motherboard component. RESET button (RESET) Press the reset button to reboot the system. ASUS MAXIMUS VII HERO 1-27…

• Page 42
  BIOS has been restored to its default settings. • We recommend that you download and update to the latest BIOS version from the ASUS website at www.asus.com after using the MemOK! function. Chapter 1: Product introduction 1-28…
• Page 43
  KeyBot button (KeyBot) Press this button to activate the KeyBot feature. • The KeyBot feature supports USB keyboards only. • For more information about the KeyBot feature, refer to the Software Support chapter of this user guide. ASUS MAXIMUS VII HERO 1-29…
• Page 44
  Sonic SoundStage button (SOUNDSTAGE) Press this button to activate the Sonic SoundStage feature. • The debug code on the Q-Code LED shows the current Sonic SoundStage profile when you press the Sonic SoundStage button. • For more information about Sonic SoundStage, refer to the Software Support chapter of this user guide.

• Page 45: Onboard Leds

  Q LEDs check key components (CPU, DRAM, VGA card, and booting devices) in sequence during motherboard booting process. If an error is found, the corresponding LED flashes until the problem is solved. This user-friendly design provides an intuitive way to locate the root problem within seconds. ASUS MAXIMUS VII HERO 1-31…

• Page 46
  KeyBot LED (KEYBOT_LED) This LED lights up when the KeyBot button is pressed. USB BIOS Flashback LED (FLBK_LED) This LED flashes when you press the BIOS Flashback button for BIOS update. Chapter 1: Product introduction 1-32…
• Page 47
  Q-Code LEDs The Q-Code LED design provides you with a 2-digit error code that displays the system status. Refer to the Q-Code table on the following page for details. ASUS MAXIMUS VII HERO 1-33…
• Page 48
  Q-Code table Code Description Not used Power on. Reset type detection (soft/hard). AP initialization before microcode loading System Agent initialization before microcode loading PCH initialization before microcode loading Microcode loading AP initialization after microcode loading System Agent initialization after microcode loading PCH initialization after microcode loading Cache initialization 0C –…
• Page 49
  Reserved for future AMI progress codes S3 Resume Failed S3 Resume PPI not Found S3 Resume Boot Script Error S3 OS Wake Error Reserved for future AMI error codes EC – EF (continued on the next page) ASUS MAXIMUS VII HERO 1-35…
• Page 50
  Q-Code table Code Description Recovery condition triggered by firmware (Auto recovery) Recovery condition triggered by user (Forced recovery) Recovery process started Recovery firmware image is found Recovery firmware image is loaded F5 – F7 Reserved for future AMI progress codes Recovery PPI is not available Recovery capsule is not found Invalid recovery capsule…
• Page 51
  Legacy Boot event Exit Boot Services event Runtime Set Virtual Address MAP Begin Runtime Set Virtual Address MAP End Legacy Option ROM Initialization System Reset USB hot plug PCI bus hot plug (continued on the next page) ASUS MAXIMUS VII HERO 1-37…
• Page 52
  Q-Code table Code Description Clean-up of NVRAM Configuration Reset (reset of NVRAM settings) Reserved for future AMI codes B8– BF CPU initialization error System Agent initialization error PCH initialization error Some of the Architectural Protocols are not available PCI resource allocation error. Out of Resources No Space for Legacy Option ROM No Console Output Devices are found No Console Input Devices are found…

• Page 53: Internal Connectors

  Before creating a RAID set, refer to section RAID configurations or the manual bundled in the motherboard support DVD. • When using NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to section SATA Configuration for details. ASUS MAXIMUS VII HERO 1-39…

• Page 54
  ASMedia Serial ATA 6 Gb/s connectors (7-pin SATA6G_E1/2 [red]) ® These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables. USB 3.0 connector (20-1 pin USB3_12) This connector allows you to connect a USB 3.0 module for additional USB 3.0 front or rear panel ports.
• Page 55
  Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! You can connect the front panel USB cable to the ASUS Q-Connector (USB) first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports.
• Page 56
  Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. •…
• Page 57
  Do not place jumper caps on the fan connectors! • Ensure to fully insert the 4-pin CPU fan cable to the CPU fan connector. The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power. ASUS MAXIMUS VII HERO 1-43…
• Page 58
  • If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support.asus. com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details. Chapter 1: Product introduction 1-44…
• Page 59
  Pressing the power button for more than four seconds while the system is ON turns the system OFF. • Reset button (2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. ASUS MAXIMUS VII HERO 1-45…
• Page 60
  • The OC Panel and Front Base are purchased separately. • Visit www.asus.com for more information about the OC Panel and Front Base. TPM connector (20-1 pin TPM) This connector supports a Trusted Platform Module (TPM) system, which securely store keys, digital certificates, passwords and data. A TPM system also helps enhance the network security, protects digital identities, and ensures platform integrity.
• Page 61
  M.2 (Socket 3) The M.2 (Socket 3) with M Key supports type 2260 (22 mm x 60 mm) and 2280 (22 mm x 80 mm) PCIe interface storage devices. ASUS MAXIMUS VII HERO 1-47…
• Page 62
  Chapter 1: Product introduction 1-48…

• Page 63: Chapter 2: Basic Installation

  The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps are the same for all models. Install the ASUS Q-Shield to the chassis rear I/O panel. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis’…

• Page 64
  Place nine screws into the holes indicated by circles to secure the motherboard to the chassis. DO NOT over tighten the screws! Doing so can damage the motherboard. Chapter 2: Basic Installation…

• Page 65: Cpu Installation

  2.1.2 CPU installation Ensure that you install the correct CPU designed for LGA1150 socket only. DO NOT install a CPU designed for LGA1155 and LGA1156 sockets on the LGA1150 socket. ASUS MAXIMUS VII HERO…

• Page 66: Cpu Heatsink And Fan Assembly Installation

  2.1.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary. To install the CPU heatsink and fan assembly Chapter 2: Basic Installation…

• Page 67
  To uninstall the CPU heatsink and fan assembly ASUS MAXIMUS VII HERO…

• Page 68: Dimm Installation

  2.1.4 DIMM installation To remove a DIMM Chapter 2: Basic Installation…

• Page 69: Atx Power Connection

  2.1.5 ATX Power connection ASUS MAXIMUS VII HERO…

• Page 70: Sata Device Connection

  2.1.6 SATA device connection Chapter 2: Basic Installation…

• Page 71: Front I/O Connector

  2.1.7 Front I/O Connector To install ASUS Q-Connector To install USB 2.0 connector To install front panel audio connector AAFP USB 2.0 To install USB 3.0 connector USB 3.0 ASUS MAXIMUS VII HERO…

• Page 72: Expansion Card Installation

  2.1.8 Expansion Card installation To install PCIe x16 cards Chapter 2: Basic Installation 2-10…

• Page 73: Bios Update Utility

  Connect your USB keyboard on the KeyBot port if you want to use the KeyBot feature. Updating BIOS may have risks. If the BIOS program is damaged during the process and results to the system’s failure to boot up, please contact your local ASUS Service Center. ASUS MAXIMUS VII HERO…

• Page 74: Motherboard Rear And Audio Connections

  Motherboard rear and audio connections 2.3.1 Rear I/O connection Rear panel connectors 1. PS/2 Keyboard/Mouse combo port 2. Optical S/PDIF OUT port 3. VGA port 4. Intel USB 3.0 ports 3 and 4. Lower port supports USB BIOS Flasback feature. ®…

• Page 75: Audio I/O Connections

  Mic In Mic In Center/Sub Center/Sub Orange – – woofer woofer Black – Rear Speaker Out Rear Speaker Out Rear Speaker Out Gray – – – Side Speaker Out 2.3.2 Audio I/O connections Audio I/O ports ASUS MAXIMUS VII HERO 2-13…

• Page 76
  Connect to Headphone and Mic Connect to Stereo Speakers Connect to 2.1 channel Speakers Chapter 2: Basic Installation 2-14…
• Page 77
  Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers ASUS MAXIMUS VII HERO 2-15…
• Page 78
  Connect to 7.1 channel Speakers Chapter 2: Basic Installation 2-16…

• Page 79: Starting Up For The First Time

  While the system is ON, press the power button for less than four seconds to put the system on sleep mode or soft-off mode, depending on the BIOS setting. Press the power button for more than four seconds to let the system enter the soft-off mode regardless of the BIOS setting. ASUS MAXIMUS VII HERO 2-17…

• Page 80
  Chapter 2: Basic Installation 2-18…

• Page 81: Chapter 3: Bios Setup

  BIOS setup Knowing BIOS The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboard- only BIOS controls to enable a more flexible and convenient mouse input. You can easily navigate the new UEFI BIOS with the same smoothness as your operating system.

• Page 82: Bios Setup Program

  BIOS setup program Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screen include navigation keys and brief onscreen help to guide you in using the BIOS Setup program. Entering BIOS at startup To enter BIOS Setup at startup, press <Delete> during the Power-On Self Test (POST). If you do not press <Delete>, POST continues with its routines.

• Page 83: Ez Mode

  Click to go to Advanced mode Click to display boot devices Loads optimized default settings Selects the boot device priority The boot device options vary depending on the devices you installed to the system. ASUS MAXIMUS VII HERO…

• Page 84: Advanced Mode

  3.2.2 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following sections for the detailed configurations. To switch from EZ Mode to Advanced Mode, click Advanced Mode(F7) or press F7 hotkey.

• Page 85
  EZ Tuning Wizard(F11) This button above the menu bar allows you to view and tweak the overclocking settings of your system. It also allows you to change the motherboard’s SATA mode from AHCI to RAID mode. ASUS MAXIMUS VII HERO…
• Page 86
  Quick Note (F9) This button above the menu bar allows you to key in notes of the activities that you have done in BIOS. • The quick Note function does not support the following keyboard functions: delete, cut, copy and paste. •…

• Page 87: My Favorites

  You cannot add the following items to My Favorite items: • Items with submenu options • User-managed items such as language and boot order • Configuration items such as Memory SPD Information, system time and date. ASUS MAXIMUS VII HERO…

• Page 88: Extreme Tweaker Menu

  Extreme Tweaker menu The Extreme Tweaker menu items allow you to configure overclocking-related items. Be cautious when changing the settings of the Extreme Tweaker menu items. Incorrect field values can cause the system to malfunction The configuration options for this section vary depending on the CPU and DIMM model you installed on the motherboard.

• Page 89
  ASUS MultiCore Enhancement [Auto] [Auto] This item allows you to maximize the oveclocking performance optimized by ASUS core ratio settings. [Disabled] This item allows you to set to default core ratio settings. CPU Core Ratio [Sync All Cores] This item allows you to set the CPU core ratio limit per core or synchronize automatically to all cores.
• Page 90
  If you assign a value for more Core Ratio Limit, do not set the less Core Ratio Limit to [Auto]. Min. CPU Cache Ratio [Auto] Allows you to set the minimum possible ratio on the Uncore part of the processor. Use the <+>…
• Page 91
  DRAM READ to PRE Time [Auto] Configuration options: [Auto] [1] – [15] DRAM FOUR ACT WIN Time [Auto] Configuration options: [Auto] [1] – [255] DRAM WRITE to READ Delay [Auto] Configuration options: [Auto] [1] – [15] ASUS MAXIMUS VII HERO 3-11…
• Page 92
  DRAM CKE Minimum pulse Width [Auto] Configuration options: [Auto] [1] – [15] DRAM CAS# Write Latency [Auto] Configuration options: [Auto] [1] – [31] RTL IOL control DRAM RTL Initial Value [Auto] Configuration options: [Auto] [1] — [63] DRAM RTL(CHA_R0D0) [Auto] Configuration options: [Auto] [1] — [63] DRAM RTL(CHA_R0D1) [Auto] Configuration options: [Auto] [1] — [63]…
• Page 93
  Allows you to enable or disable the Channel B DIMM slots with the following configuration options: [Enable Both DIMMS] [Disable DIMM0] [Disable DIMM1] [Disable Both DIMMS] Scramble Setting [Optimized (ASUS)] Set this item to [Optimized (ASUS)] to enhance system stability. Configuration options: [Optimized (ASUS)] [Default (MRC)] ASUS MAXIMUS VII HERO 3-13…
• Page 94
  MCH Full Check [Auto] Enable this item to enhance the stability of your system. Disable this item to enhance the DRAM overclocking capability. Configuration options: [Auto] [Enabled] [Disabled] DQ Sense Amplifier [Auto] Reducing usually helps overclocking and over-voltage. Configuration options: [Auto] [+16] – [-29] DQS Sense Amplifier [Auto] Reducing usually helps overclocking and over-voltage.
• Page 95
  This item allows you to set the power phase control of the CPU. Configuration options: [Auto] [Standard] [Optimized] [Extreme] DO NOT remove the thermal module when setting this item to [Power Phase Response]. The thermal conditions should be monitored. ASUS MAXIMUS VII HERO 3-15…
• Page 96
  CPU Power Duty Control [T.Probe] DIGI + VRM Duty Control adjusts the current of every VRM phase and the thermal conditions of every phase component. [T. Probe] Select to set the VRM thermal balance mode. [Extreme] Select to set the VRM current balance mode. DO NOT remove the thermal module.
• Page 97
  Configuration options: [Auto] [Disabled] [Enabled] CPU Integrated VR Fault Management [Auto] Allows you to prevent tripping the Fully Integrated Voltage Regulator when doing over-voltage. Configuration options: [Auto] [Disabled] [Enabled] ASUS MAXIMUS VII HERO 3-17…
• Page 98
  We recommend to set this item to [Disable] when overclocking. CPU Internal Power Configuration CPU Integrated VR Efficiency Management [Auto] Allows you to improve power saving when the processor is in low power state. Disable this item to make the Fully Integrated Voltage Regulator work in high performance at all times.
• Page 99
  This item allows you to configure the CPU cache voltage offset value. CPU Graphics Voltage [Auto] Configures the amount of Voltage fed to the onboard graphics unit on the processor. Increase when increasing IGPU Frequency. Configuration options: [Auto] [Manual Mode] [Offset Mode [Adaptive Mode] ASUS MAXIMUS VII HERO 3-19…
• Page 100
  Appear only when you set the CPU Graphics Voltage to [Manual Mode]. CPU Graphics Voltage Override [Auto] This item allows you to configure the amount of voltage fed to the CPU uncores including its cache. The following items appear only when you set the CPU Graphics Voltage to [Offset Mode]. Offset Mode Sign [+] To offset the voltage by a positive value.
• Page 101
  The values range from 1.20 V to 1.92 V with a 0.005 V interval. ® According to Intel CPU specifications, DIMMs with voltage requirement over 1.65 V may damage the CPU permanently. We recommend that you install the DIMMs with the voltage requirement below 1.65 V. ASUS MAXIMUS VII HERO 3-21…
• Page 102
  PCH Core Voltage [Auto] This item allows you to set the Core voltage for the PCH (Platform Controller Hub). You can use the <+> or <-> keys to adjust the value. The values range from 0.70 V to 1.80 V with a 0.0125 V interval.

• Page 103: Main Menu

  The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings. ASUS MAXIMUS VII HERO 3-23…

• Page 104
  Security The Security menu items allow you to change the system security settings. • If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC) RAM to clear the BIOS password. See section 1.2.6 Onboard buttons and switches for information on how to erase the RTC RAM via the Clear CMOS button.
• Page 105
  To clear the user password, follow the same steps as in changing a user password, but press <Enter> when prompted to create/confirm the password. After you clear the password, the User Password item on top of the screen shows Not Installed. ASUS MAXIMUS VII HERO 3-25…

• Page 106: Advanced Menu

  Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. Chapter 3: BIOS setup 3-26…

• Page 107: Cpu Configuration

  Configuration options: [All] [1] [2] [3] Limit CPUID Maximum [Disabled] When set to [Enabled], this item allows the legacy OS to boot even without support for CPUs with extended CPUID functions. Configuration options: [Disabled] [Enabled] ASUS MAXIMUS VII HERO 3-27…

• Page 108
  Execute Disable Bit [Enabled] Execute Disable prevents certain classes of malicious buffer overflow attacks when combined with a supporting OS (SuSE Linux 9.2, RedHat Enterprise 3 Update 3). Configuration options: [Disabled] [Enabled] Intel Virtualization Technology [Disabled] When set to [Enabled], a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology.
• Page 109
  This item allows you to set the duration of C7 latency for C7 state. Configuration options: [Short] [Long] Package C-States Support [Auto] This item allows you to set the a C-state support for the CPU package. Configuration options: [Auto] [Enabled] [C0/C1] [C2] [C3] [C6] [CPU C7] [CPU C7s] ASUS MAXIMUS VII HERO 3-29…

• Page 110: Pch Configuration

  3.6.2 PCH Configuration PCI Express Configuration This item allows you to configure the PCI Express slots. PCI-E Speed [Auto] This item allows your system to automatically select the PCI Express port speed. When set to [Gen1], the PCI-E port runs at PCI-E 1.0 speed. When set to [Gen2], the PCI-E port runs at PCI-E 2.0 speed.

• Page 111: Pch Storage Configuration

  While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Empty if no SATA device is installed to the corresponding SATA port. Scroll down to display the other BIOS items. ASUS MAXIMUS VII HERO 3-31…

• Page 112
  SATA Mode Selection [AHCI] This item allows you to set the SATA configuration. [Disabled] Disables the SATA function. [IDE] Set to [IDE] when you want to use the Serial ATA hard disk drives as Parallel ATA physical storage devices. [AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the AHCI (Advanced Host Controller Interface).

• Page 113: System Agent Configuration

  The primary display will be set to PCI-E when a PCI-E graphic card is detected. [CPU Graphics] Force the primary display to be from the CPU Graphics. [PCIE] Force the primary display to be from the PCI-E graphic cards. ASUS MAXIMUS VII HERO 3-33…

• Page 114
  CPU Graphics Memory [Auto] Allows you to select the amount of system memory allocated to DVMT 5.0 used by the CPU graphics. Configuration options: [Auto] [32M] [64M] [96M] [128M] [160M] [192M] [224M] [256M] [288M] [320M] [352M] [384M] [416M] [448M] [480M] [512M] Render Standby [Auto] Allows you to enable the Intel Graphics Render Standby support to reduce iGPU…

• Page 115: Usb Configuration

  Support EHCI by BIOS for operating systems without EHCI support. USB Single Port Control Allows you to enable or disable the individual USB ports. Refer to the Motherboard layout section for the location of the USB ports. ASUS MAXIMUS VII HERO 3-35…

• Page 116: Platform Misc Configuration

  3.6.6 Platform Misc Configuration The items in this menu allow you to configure the platform-related features. PCI-E Native Power Management [Disabled] Enable this item to enhance the PCI-E power saving condition. Configuration options: [Disabled] [Enabled] The following item appears only when you set the PCI Express Native Power Management to [Enabled].

• Page 117: Onboard Devices Configuration

  Sets the front panel audio connector (AAFP) mode to high definition audio. [AC97] Sets the front panel audio connector (AAFP) mode to legacy AC’97 SPDIF Out Type [SPDIF] [SPDIF] Sets to an SPDIF audio output. [HDMI] Sets to an HDMI audio output. ASUS MAXIMUS VII HERO 3-37…

• Page 118
  ASMedia Storage Controller (SATA6G_E12) [Enabled] Allows you to select the ASMedia storage controller operating mode. [Disabled] Disables the ASMedia storage controller. [Enabled] Enables the ASMedia storage controller. Windows Hot-plug Notification [Disabled] Allows you to set the hot-plug notification in Windows operating system. Configuration options: [Disabled] [Enabled] ASPM Support [Disabled] Allows you to set the controller ASPM (active state power management) support.

• Page 119: Apm Configuration

  Enables the PCIE/PCI devices to generate a wake-on-LAN feature of the PCIE LAN devices. Power On By RTC [Disabled] [Disabled] Disables RTC to generate a wake event. [Enabled] Generates a wake event and configure the real-time clock (RTC) alarm date. ASUS MAXIMUS VII HERO 3-39…

• Page 120: Network Stack Configuration

  3.6.9 Network Stack Configuration Network Stack [Disabled] This item allows you to disable or enable the UEFI network stack. Configuration options: [Disabled] [Enable] The following items appear only when you set the Network Stack to [Enabled]. Ipv4/Ipv6 PXE Support [Enabled] Allows you to enable or disable the Ipv4/Ipv6 PXE boot option.

• Page 121: Monitor Menu

  (RPM). If any of the fans is not connected to the motherboard, the field shows [N/A]. These items are not user-configurable. Press <Enter> and select [Ignore] if you do not wish to display the detected temperatures. ASUS MAXIMUS VII HERO 3-41…

• Page 122
  Fan Speed Control CPU Q-Fan Control [Auto] [Disabled] Detects the type of CPU fan installed and automatically switches the mode control. When a 3-pin CPU fan is installed, select this mode for the DC mode Q-Fan control. [Auto] Enables the CPU Q-Fan control feature in PWM mode for 4-pin CPU fan. [DC Mode] Disables the Q-Fan control.
• Page 123
  Use the <+> or <-> keys to adjust the maximum CPU fan duty cycle. The values range from 20% to 100%. When the CPU temperature reaches the upper limit, the CPU fan will operate at the maximum duty cycle. ASUS MAXIMUS VII HERO 3-43…

• Page 124: Boot Menu

  Chassis Fan 1/2/3/4 Lower Temperature [40] Displays the lower limit of the CPU temperature. Chassis Fan 1/2/3/4 Min. Duty Cycle(%) [60] Use the <+> or <-> keys to adjust the minimum CPU fan duty cycle. The values range from 0% to 100%. When the CPU temperature is under 40ºC, the CPU fan will operate at the minimum duty cycle.

• Page 125
  The system will only turn on or off when the reset button is pressed. You have to connect the 2-pin connector of the chassis reset button cable on the onboard DRCT header to support this function. ASUS MAXIMUS VII HERO 3-45…
• Page 126
  The Option ROM Messages will be shown during the POST. [Disabled] Only the ASUS logo will be shown during the POST. Interrupt 19 Capture [Disabled] Enable this item to allow the option ROMs to trap the interrupt 19. Configuration options:…
• Page 127
  Secure Boot compliant OS. ® [Other OS] Get the optimized function when booting on Windows non- ® UEFI mode. Microsoft Secure Boot only supports Windows ® ® UEFI mode. Key Management Clear Secure Boot keys ASUS MAXIMUS VII HERO 3-47…
• Page 128
  This item appears only when you load the default Secure Boot keys. This item allows you to clear all default Secure Boot keys. Save Secure Boot Keys This item allows you to save the PK (Platform Keys) to a USB storage device. PK Management Delete PK This item allows you to delete the PK from your system.
• Page 129
  OS in Safe Mode, press <F8 > after POST (Windows 8 not supported). • To select the boot device during system startup, press <F8> when ASUS Logo appears. Boot Override These items displays the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system.

• Page 130: Tool Menu

  To launch ROG SSD Secure Erase, click Tool > ROG SSD Secure Erase on the Advanced mode menu. Check the ASUS support site for a full list of SSDs tested with Secure Erase. The drive may become unstable if you run Secure Erase on an incompatible SSD.

• Page 131
  Locked. SSDs might be locked if the Secure Erase process is either incomplete or was stopped. This may be due to a third party software that uses a different password defined by ASUS. You have to unlock the SSD in the software before proceeding with Secure Erase.

• Page 132: Graphics Card Information

  Graphics Card Information This item displays the information about the graphics card installed in your system. 3.9.4 ASUS Overclocking Profile This item allows you to store or load multiple BIOS settings. Profile Name Key in the profile name to save current BIOS settings to profile 1 to 8.

• Page 133: Asus Spd Information

  Allows you to view the DRAM SPD information. DIMM slot number Allows you to select the DIMM slot number to show the plugged DRAM Serial Presence Detect (SPD) information. Configuration options: [DIMM_A1] [DIMM_A2] [DIMM_B1] [DIMM_ Some DRAM manufacturers may not be recognized. ASUS MAXIMUS VII HERO 3-53…

• Page 134: Rog Oc Panel H-Key Configure

  3.9.6 ROG OC Panel H-Key Configure The ROG OC Panel H-Key Configure allows you to input and save values on the CPU core voltage, CPU input voltage, BCLK Frequency, and CPU ratio in the UEFI BIOS. The saved values can be synchronized to a compatible OC Panel device and these values can be tweaked or configured using the OC Panel without going to the BIOS menu.

• Page 135: Exit Menu

  <Esc>, a confirmation window appears. Select Yes to discard changes and exit. Launch EFI Shell from filesystem device This option allows you to attempt to launch the EFI Shell application (shellx64.efi) from one of the available filesystem devices. ASUS MAXIMUS VII HERO 3-55…

• Page 136: Updating Bios

  ® ASUS EZ Flash 2: Updates the BIOS using a USB flash drive. ASUS CrashFree BIOS 3: Restores the BIOS using the motherboard support DVD or a USB flash drive when the BIOS file fails or gets corrupted. ASUS BIOS Updater: Updates the BIOS in DOS environment using the motherboard support DVD and a USB flash disk drive.

• Page 137
  3.11.2 ASUS EZ Flash 2 ASUS EZ Flash 2 allows you to update the BIOS without having to use a bootable floppy disk or an OS-based utility. Before you start using this utility, download the latest BIOS from the ASUS website at www.asus.com.
• Page 138
  The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. If you want to use the newer BIOS file, download the file at http://support.asus.com and save it to a USB flash drive.
• Page 139
  3.11.4 ASUS BIOS Updater ASUS BIOS Updater allows you to update the BIOS in DOS environment. The screen captures used in this section are for reference only and may not be exactly the same as actually shown on your computer screen.
• Page 140
  On the BIOS Updater screen, press <Tab> to switch from Files panel to Drives panel then select D:. ASUSTeK BIOS Updater for DOS V1.30 [2014/01/01] Current ROM Update ROM BOARD: MAXIMUS VII HERO BOARD: Unknown VER: 0210 (H :00 B :00)
• Page 141
  DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure. Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit BIOS menu. See section 3.10 Exit menu for details. ASUS MAXIMUS VII HERO 3-61…
• Page 142
  Chapter 3: BIOS setup 3-62…

• Page 143: Chapter 4: Software Support

  • Motherboard settings and hardware options vary. Use the setup procedures presented in this chapter for reference only. Refer to your OS documentation for detailed information. Support DVD information The contents of the support DVD are subject to change at any time without notice. Visit www.asus.com for updates. 4.2.1 Running the support DVD Ensure that you have an Administrator account before running the support DVD in Windows 7, Windows 8, or Windows 8.1 OS. ® ® ® To run the support DVD Place the Support DVD into the optical drive. 2. In the AutoPlay dialog box, click Run ASSETUP.exe. If the AutoPlay dialog box does not appear, browse the contents of the support DVD and ASUS motherboard support double-click or tap \binASSETUP.EXE to launch the DVD main menu ASUS MAXIMUS VII HERO…

• Page 144: Obtaining The Software Manuals

  Contains ROG related videos. Shows the available device drivers if the system detects installed devices. Click to display the ASUS contact information. Install the necessary drivers to use Click to display product the devices.

• Page 145: Software Information

  Most of the applications in the support DVD have wizards that will conveniently guide you through the installation. View the online help or readme file that came with the software application for more information. AI Suite 3 AI Suite 3 is an all-in-one interface that integrates several ASUS utilities and allows you to launch and operate these utilities simultaneously. Installing AI Suite 3 Ensure that you have an Administrator account before installing AI Suite 3 in Windows 7, ® Windows 8, or Windows 8.1 OS. ® ® To install AI Suite 3 on your computer: Windows 7 OS ® Place the Support DVD into the optical drive. 2. In the AutoPlay dialog box, click Run ASSETUP.exe then select the Utilities tab 3. From the Utilities tab, click AI Suite 3 then follow the succeeding onscreen instructions. ASUS MAXIMUS VII HERO…

• Page 146
  If the ASUS motherboard support DVD main menu did not appear, try the following steps: Go to the Start Screen then click or tap the Desktop app. On the lower left corner of the Desktop, click or tap File Explorer then select your DVD drive and tap or double-click the Setup application. Launching AI Suite 3 Windows 7 OS ® From the Desktop, click Start > All Programs > ASUS > AI Suite 3 > AI Suite 3. You can also launch AI Suite 3 in Windows 7 by clicking on the Notification area. ® Windows 8 / Windows 8.1 OS ® ®…
• Page 147
  Click to launch AI Suite 3 menu bar AI Suite 3 main menu bar System USB Charger+ 5-Way Optimization USB 3.0 Boost Information EZ Update USB BIOS Push Notice Version Flashback • Some functions in the AI Suite 3 main menu in this user guide may vary depending on the motherboard model. • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. ASUS MAXIMUS VII HERO…

• Page 148: Dual Intelligent Processors 5

  Dual Intelligent Processors 5 ASUS Dual Intelligent Processors 5 combines TPU, EPU, DIGI+ Power Control, Fan Xpert 3, and Turbo App functions to push the system’s performance to its optimal potential. It automatically balances the system’s performance, power saving, levels, and fan settings via the user-friendly AI Suite 3 utility. 5-Way Optimization The 5-Way Optimization function dynamically optimizes your PC based on real-time usage to provide the best system status. It covers the essential areas such as CPU performance, energy saving, stable digital power, cool and quiet fan control, and includes tailored settings for your apps to ensure your PC is ready for gaming, entertainment, productivity, or just about anything. Click or tap this 5-Way Optimization button to auto-detect and tune the best settings for your system DO NOT remove your fan during the tuning process. Chapter 4: Software support…

• Page 149
  Click or tap to apply the the saved profile adjustments default values adjustments Click or tap to save the adjustment into a profile Click or tap to undo the adjustments • Set the CPU Ratio Setting item in BIOS to [Auto] before using the CPU Frequency in TPU. Refer to the BIOS chapter of your motherboard’s user guide for details. • The CPU Frequency bars show the status of the CPU cores, which vary with your CPU model. ASUS MAXIMUS VII HERO…
• Page 150
  GPU Boost CPU Graphics Voltage Adjustments Click to apply the adjustments Click to enable the Click to load the Click to save the Click to default settings saved profile adjustment into a profile undo the adjustments Chapter 4: Software support…
• Page 151
  Tick to select a setting for Click to undo the Click to apply the Click to enable the Voltage Decrement adjustments adjustments default settings • When you enable Configured Max CPU Power for advanced energy saving condition, the CPU frequency may display 800 MHz in the Windows OS information ® of your computer. However, the true CPU frequency varies depending on the wattage that you manually set. You can adjust the CPU wattage from the lowest base on your preferred default value. • Configured Max CPU Power may decrease the total power delivery to the CPU and affects the CPU performance under system heavy load. To restore your system to its default settings, reboot your computer. ASUS MAXIMUS VII HERO…
• Page 152
  DIGI+ ASUS DIGI+ Power Control features the revolutionary and innovative digital VRM and DRAM Voltage controllers. These controllers offers ultra-precise memory and voltage tuning for optimal system efficiency, stability and performance. The following screens are for reference only. Configuration options varies depending on the motherboard model. Click or tap to switch Click or tap to undo Click or tap to between screens the changes apply the changes CPU Power Phase Control Increase the phase number under a heavy system load to get more transient and better thermal performance. Reduce the phase number under a light system load to increase the VRM efficiency. CPU VRM Switching Frequency Enables spread spectrum to enhance system stability. CPU Power Thermal Control A higher temperature brings a wider CPU power thermal range and extends the overclocking tolerance to enlarge the overclocking potential.
• Page 153
  Click to set the balanced Click to increase the fan’s Click to switch between CPU speed for a high cooling configuration between the and chassis fan screens capability fan’s noise level and speed ASUS MAXIMUS VII HERO 4-11…
• Page 154
  Turbo App Turbo App allows you customize the system performance, network priority, and audio setting of an application. When an application is on the Turbo App List, you can allocate the CPU frequency, assign a network priority, and define the audio setting of the selected application. Click to refresh the list of running applications Click to assign a specific application(.exe) into Turbo App list Click to scroll up/down Click to apply the changes Click to undo the changes Applications list pane Displays all the running applications on your system.
• Page 155
  Click to enable UASP or Turbo Mode to the USB Click to select a USB device device for a faster data transfer rate Ensure to connect your USB 3.0 device to the USB 3.0 ports that support USB 3.0 Boost. Refer to the Rear I/O connection section of your user guide for more details. • USB 3.0 Boost automatically detects the USB 3.0 devices that support UASP. For a list of UASP-supported USB 3.0 devices, visit the ASUS website at www.asus.com. • The data transfer speed varies with USB devices. For a higher data transfer performance, use a USB 3.0 device. ASUS MAXIMUS VII HERO 4-13…
• Page 156
  EZ Update EZ Update is a utility that allows you to automatically update your motherboard’s software, drivers, or BIOS. With this utility, you can also manually update the BIOS and select the boot logo that will display during POST. Launching EZ Update To launch EZ Update, click or tap on the top-right corner of the AI Suite 3 main menu, then click EZ Update on the AI Suite 3 main menu bar. EZ Update screen Click to automatically update your motherboard’s driver, software and firmware Click to select a Click to update Click to search and boot logo the BIOS select the BIOS file Chapter 4: Software support…
• Page 157
  System Information This utility displays the detailed information and settings of the installed motherboard, CPU, and memory. Launching the System Information To launch System Information, click or tap on the top-right corner of the AI Suite 3 main menu, then select System Information. Viewing the motherboard information Click or tap the MB tab to view the motherboard’s information. Viewing the CPU information Click or tap the CPU tab to view the processor’s information. ASUS MAXIMUS VII HERO 4-15…
• Page 158
  Viewing the SPD information Click or tap the SPD tab to view the memory’s information. Chapter 4: Software support 4-16…
• Page 159
  BIOS Click or tap update available to cancel the for download download schedule setting Click or tap to apply the download schedule setting Scheduling the BIOS download In the Download Setting field, tick Schedule (days) then select the number of days for the BIOS download schedule. Click or tap Apply to save the BIOS download schedule. Click or tap Cancel to cancel the download schedule. ASUS MAXIMUS VII HERO 4-17…
• Page 160
  Click or tap to discard the settings Click or tap to select the type of USB device that you wish to charge when the system is off Ensure to connect your USB device into the USB port that supports this utility. Refer to section 2.3.1 Rear I/O connection of your user manual for more details. • USB Charger+ does not support USB hubs, USB extension cables, and generic USB cables. • USB Charger+ may not recognize some ASUS devices due to varying design. Chapter 4: Software support 4-18…
• Page 161
  Click or tap to Click or tap to apply the settings discard the settings You can also enable the Push Notice via the Push Notice shortcut on the lower-right corner of your screen. To do this, click or tap << then click or tap then select Pairing your computer and smart device To pair your computer and smart device: On your smart device, tap to launch Push Notice. Push Notice Tap Push Scan then tap the name of your computer that you want to pair with. To pair your computer and smart device, ensure that both are connected to the same wireless network. ASUS MAXIMUS VII HERO 4-19…
• Page 162
  Setting up PC Mode alerts of your computer This feature allows you to restart, shut down, or put your computer to sleep mode and sends an alert to your smart device. Tick these to enable mode alerts Tick to select the smart device Set the day and time to enable the PC modes Set the minutes to send the alert before the PC mode/s activation Key in your messages for more information…
• Page 163
  Viewing your computer status on your smart device Tap on your smart device to launch Push Notice. Push Notice Tap to delete PC Tap to view PC alerts mode alerts Tap to view PC status alerts Tap to view PC sent messages Tap to scan more host computers ASUS MAXIMUS VII HERO 4-21…

• Page 164: Rog Audio Features

  ROG Audio features Installing the Software Follow the installation wizard to install the Realtek Audio Manager driver from the support ® DVD that is bundled with the motherboard. If the Realtek audio software is correctly installed, you will find the Realtek HD Audio ® ® Manager icon on the taskbar. Double-click or tap on the icon to display the Realtek HD ® Audio Manager. Realtek ® HD Audio Manager Sonic Studio Sonic Studio is an audio suite that offers six audio controls: Reverb, Bass Boost, Equalizer, Voice Clarity, Smart EQ (Smart Volume), and Virtual Surround. Virtual Surround is dedicated for 2-channel headset and offers one of the best virtual surround technology for gaming. Chapter 4: Software support 4-22…

• Page 165
  Voice Clarity switch Click to enable this item. Voice clarity extracts human voice for better dialog/audio communication or to hear vocals more clearly when listening to a music. Smart EQ (Smart Volume) switch Dynamically adjust the EQ so you can hear more details. Virtual Surround switch This item lets you experience 7.1 CH virtual surround from your headset when enabled. Reverb switch The Reverb effect is part of the Virtual Sound Stage effects that lets you choose other reverb presets. Reverb presets Click to choice and select a reverb effect from the different environmental spaces for reverb effects. This item is only available when the Reverb switch is enabled. Test tone Click this button to start the test for the selected preset profile. Preset profiles Click any of the preset profiles. Choose from Gaming, music, movie, or communication. Profile import/export Allows you to Import, export, or revert to the default setting of a profile. ASUS MAXIMUS VII HERO 4-23…
• Page 166
  Sonic SenseAmp Sonic SenseAmp is an exclusive ROG invention that is a built-in headphone AMP on onboard audio with three AMP levels adjustment. It detects your headphone’s impedance and adjusts the built-in AMP accordingly. Sonic SenseAmp only works on front panel. When you plug a headphone into the front headphone jack, Sonic SenseAmp displays a pop- up window that displays “Detecting headphone impedance”. After detecting the headphone’s impedance, Sonic SenseAmp displays another pop-up window similar to the one shown below. Refer to the table below on the behavior of Sonic SenseAmp when adjusting the impedance of the detected headphone: 32 ohm Amplify Level is automatically set at Performance 150 ohms Amplify Level is automatically set at Powerful > 150 ohms Amplify Level is automatically set at Extreme Other device The device plugged in detected as other device Chapter 4: Software support 4-24…
• Page 167
  After you close the pop-window, Sonic SenseAmp enters speaker configuration and displays the adjusted headphone impedance. Click to manually adjust the amplify level Displays the impedance of your headphone ASUS MAXIMUS VII HERO 4-25…
• Page 168
  Sonic SoundStage Sonic SoundStage is a hardware based sound solution for virtual Sound Stage that offers four preset gaming profiles: FPS, Racing, Combat and Sport. • This feature is only available for front panel Headphone output. • You can enable this feature by enabling the dedicated SoundStage button on your motherboard. Refer to the section of your motherboard’s user guide for the location of the SoundStage button. Click any of the four preset gaming profiles Use the slider to manually adjust the setting of an item Crossing Move the slider to adjust the amount of cross channel mixing. Revert Move the slider to revert the main audio source. Space Move the slider to adjust and virtualize the space sound. Crossing gain This item only works when Crossing and Revert is enabled. Move the slider to adjust the hardness of the wall. Chapter 4: Software support 4-26…
• Page 169
  DTS Connect DTS Connect delivers excellent audio entertainment across all formats and works with 4, 5.1 and 7.1 channels of incredible surround sound . It also allows you to connect your PC to a home theatre system. Control settings panel ASUS MAXIMUS VII HERO 4-27…

• Page 170: Sonic Radar Ii

  Sonic Radar II Sonic Radar II is designed for First Person Shooting (FPS) games and shows the precise direction and intensity of where a sound is coming from. It features a simple and friendly user-interface and also features sound enhancers to amplify desired sound effects. Display Menu Customize the settings for each game including Transparency, Signal, Size, and Remanency. Displays the options available. Click a tab to select an option. Each option has its own settings and menus. Click to reset to the default settings Click to start the test tone Use the sliders to adjust the settings Displays the list of games…

• Page 171
  Audio Mode/Radar Selection menu Allows you to configure the sound enhancers. Tick to choose the desired sound enhancer Audio Mode/Radar Selection are enabled with shortcut keys in the game. Refer to the Controls tab for more information about the shortcut key settings. ASUS MAXIMUS VII HERO 4-29…

• Page 172: Gamefirst Iii

  GameFirst III GameFirst III is a network management software that features four preset packet prioritized profiles (Optimization, Game, Media Streaming and File Sharing) facilitating different user scenarios. Users can also manually allocate bandwidth and adjust priority settings of each application to run faster and smoother. To use GameFirst III, double-click on the desktop. Click any item for quick view Click to open the tabs for different functions Use the bar to adjust the bandwidth Click to load a preset speed settings or priority profile and key in the value of configure its settings the input field…

• Page 173
  Network Monitor Top 5 application Displays the top 5 bandwidth consuming applications currently used. Application usage Displays the individual downloading and uploading bandwidth of currently used applications. Total usage Displays the total downloading and uploading bandwidth of the currently used applications. ASUS MAXIMUS VII HERO 4-31…
• Page 174
  Bandwidth Test You can use this feature to test the Internet Service Provider (ISP) speed or manually key in the desired uploading/downloading speed and apply the speed if needed. Key in the upload/ download speed Click to begin the speed test Click to apply the speed after manually keying in the desired speed or after you performing the speed test Using the Network Information Displays information about the physical network card such as speed, physical address, IP address, subnet mask, and default gateway.

• Page 175: Keybot

  Click to configure Macro keys, Smart login, Tick to toggle the KeyBot Function keys, and Shortcut settings function on/off Click any of the items to perform a specific tasks, or click their corresponding keys on the keyboard Smart login ASUS MAXIMUS VII HERO 4-33…

• Page 176
  Function Keys Shortcut Chapter 4: Software support 4-34…

• Page 177: Asus Media Streamer

  Click or tap to edit media files Click or tap to select media type Select the device you Log in ASUS account to stream Click or tap a media file to play want to stream to play in different networks…

• Page 178
  Adding and deleting media files Drag and drop or tick files to add or delete. Click to add or create a new folder Click to add the selected files Click to delete selected files Click to proceed with the deletion or Click to cancel changes addition of files The following media formats are supported: .3gp, .mp4, .m4a, .aac, .ts, .flac, .mp3, .mid,…

• Page 179: Asus Disk Unlocker

  4.11 ASUS Disk Unlocker This ASUS exclusive utility provides an easy-to-use interface to identify and utilize all drive space in hard disk drives (HDD). ASUS Disk Unlocker is supported only on Windows 7 and Windows ® ® To launch ASUS Disk Unlocker, click Click to open the help file that shows the detailed information on how to use ASUS Disk Unlocker ASUS Disk Unlocker Help file ASUS MAXIMUS VII HERO 4-37…

• Page 180: Ramdisk

  4.12 RAMDisk RAMDisk is a data-storage software that reserves a part of your system’s memory and turns it into a high-speed virtual drive where you can store cache files and game apps for instant access. The Dynamic Memory Allocation function can release the unused memory of RAMDisk back to the system when needed and helps extend the lifespan of your SSD or HDD. The following folders are not suitable for RAMDisk optimization. Moving them into the RAMDisk might negatively affect the performance of your system. • Swap file/Page file: The swap file is a permanent storage space used as the virtual memory expansion of the system memory. Moving the swap file into the RAM Disk simply defects the whole purpose of having it and may affect your system’s performance. • Startup folders: Since RAMDisk loads during boot up together with the contents of the Junction folders, changing the location of the startup folders may cause system error and disable loading your RAMDisk. To launch RAMDisk, click Creating/Deleting a RAMDisk drive Your RAMDisk drive allows you to place your favorite applications and files into RAM so you can utilize your RAM speed for better read/write performance. The files that are stored inside the RAMDisk are automatically backed up every time your PC is turned off. The startup time may take a while, depending on the size of your RAMDisk drive. To create RAMDisk drives: Click to create RAMDisk drives Move the slider to the Click the drop-down right to set the size arrow to choose a drive…

• Page 181
  Click to select where to RAMDisk drive and its create a junction point. available storage space. Click to finish adding the new junction point. Click to delete the existing junction point. ASUS MAXIMUS VII HERO 4-39…
• Page 182
  Synchronizing backup files After creating a junction point, RAMDisk automatically creates a backup folder in the file’s original location. Use RAMDisk to manually synchronize updates with these backup files. Click Synchronize to update your files Chapter 4: Software support 4-40…

• Page 183: Memtweakit

  Click a tab to configure the memory timing Click About tab then click REPUBLIC OF GAMERS to access the official ROG website Click to exit MemTweakIt Click to apply your settings Click to validate your settings. ASUS MAXIMUS VII HERO 4-41…

• Page 184
  Validating and saving your MemTweakIt settings To validate and save your configuration online: Launch MemTweakIt and click Validate. In Online Mode, key in your ASUS account ID and password, and click Submit. Your configuration will be displayed in MemTweakIt webpage. To validate and save your configuration manually: Launch MemTweakIt and click Validate. In Manual Mode, click Save Validation File. Key in a file name for your configuration file and click Submit. Click validation webpage. In MemTweakIt — Validation File Upload window, key in your ASUS account ID and password. Click Browse, locate the saved .cvf file, and click Open. Click Submit. Your configuration will be displayed in MemTweakIt webpage. Chapter 4: Software support 4-42…

• Page 185: Rog Cpu-Z

  4.14 ROG CPU-Z This utility gathers information about the main devices installed in your system and displays it in an ROG custom layout. ROG CPU-Z provides you information and status of your CPU, motherboard, memory, graphics card, and other components installed in your system. You can generate a report about your system info and send or post it on the CPU-Z website. To use ROG CPU-Z, double-click on the desktop. ASUS MAXIMUS VII HERO 4-43…

• Page 186
  Chapter 4: Software support 4-44…

• Page 187: Chapter 5: Raid Support

  With the RAID 10 configuration you get all the benefits of both RAID 0 and RAID 1 configurations. Use four new hard disk drives or use an existing drive and three new drives for this setup. ASUS MAXIMUS VII HERO…

• Page 188: Installing Serial Ata Hard Disks

  5.1.2 Installing Serial ATA hard disks The motherboard supports Serial ATA hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array. To install the SATA hard disks for a RAID configuration: Install the SATA hard disks into the drive bays.

• Page 189: Intel ® Rapid Storage Technology Option Rom Utility

  The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen. The utility supports maximum four hard disk drives for RAID configuration. ASUS MAXIMUS VII HERO…

• Page 190
  Creating a RAID set To create a RAID set: From the utility main menu, select 1. Create RAID Volume and press <Enter>. The following screen appears: Intel(R) Rapid Storage Technology — Option ROM — v10.5.1.1070 Copyright(C) 2003-10 Intel Corporation. All Rights Reserved. [ CREATE VOLUME MENU ] Name: Volume0…
• Page 191
  WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST. Are you sure you want to create this volume? (Y/N): Press <Y> to create the RAID volume and return to the main menu, or <N> to go back to the CREATE VOLUME menu. ASUS MAXIMUS VII HERO…
• Page 192
  Deleting a RAID set Be cautious when deleting a RAID set. You will lose all data on the hard disk drives when you delete a RAID set. To delete a RAID set: From the utility main menu, select 2. Delete RAID Volume and press <Enter>. The following screen appears: [ DELETE VOLUME MENU ] Name…

• Page 193: Creating A Raid Driver Disk

  When the Make Disk menu appears, press <1> to create a RAID driver disk. Insert a formatted floppy disk into the USB floppy disk drive, then press <Enter>. Follow the succeeding screen instructions to complete the process. ASUS MAXIMUS VII HERO…

• Page 194: Creating A Raid Driver Disk In Windows

  5.2.2 Creating a RAID driver disk in Windows ® To create a RAID driver disk in Windows ® Start Windows ® Plug the USB floppy disk drive and insert a floppy disk. Place the motherboard support DVD into the optical drive. Go to the Make Disk menu, and then click Intel AHCI/RAID Driver Disk to create a RAID driver disk.

• Page 195: Appendices

  Consult the dealer or an experienced radio/TV technician for help. The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. ASUS MAXIMUS VII HERO…

• Page 196
  IC: Canadian Compliance Statement Complies with the Canadian ICES-003 Class B specifications. This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations. This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
• Page 197
  ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials.

• Page 198: Asus Contact Information

  +1-510-739-3777 +1-510-608-4555 Web site http://www.asus.com/us/ Technical Support Support fax +1-812-284-0883 Telephone +1-812-282-2787 Online support http://www.service.asus.com/ ASUS COMPUTER GmbH (Germany and Austria) Address Harkort Str. 21-23, D-40880 Ratingen, Germany +49-2102-959911 Web site http://www.asus.com/de Online contact http://eu-rma.asus.com/sales Technical Support Telephone +49-1805-010923* Support Fax…

• Page 199
  ASUS MAXIMUS VII HERO…
• Page 200
  Appendices…