Mtd ohv 600 series инструкция

Инструкция MTD T/240 B 500 для устройства культиватор содержит страницы на русском языке. Размер файла: 860.94 kB. Состоит из 11 стр. Вы можете скачать pdf файл этой инструкции: Скачать PDF Form 770-1816 -2008 : T/240 OHV 500, T/240 OHV 600  MTD. . . : —  ; —  ,  . T/240 OHV 500 T/240 OHV 600 , 4- ,  ,  . 5,0 6,0 ,  0,6 ,  57 ,  31 ,  40,0 40,0 . 1  1  . 2  1  . 3  1  . 4  1  . — . : — . — . . — . — ,  — .  — . — ,  — . . . ,  ,  . . — . ,  — ,  ,  . ,  —  16  . ,  ,  ,  . ,  , . — .  . ,  ,  . ,  ,  — .  ,  — — . — : —  ; —  . — ,  ,  . — . — .  . — .

Описание

Мотоблоки МТД производятся в Германии и основной упор в них сделан именно на качество. Поэтому мотоблоки МТД нашли применение среди людей, которые приобретают оборудование не на один сезон, а рассчитывают на его длительную эксплуатацию.

Немецкий завод предлагает несколько модификаций своих устройств, давайте рассмотрим каждую из них более подробно.

Модельный ряд

МТД 240

Это представитель легких мотокультиваторов, единственным предназначением которого является фрезерование почвы.

• На МТД 240 установлен бензиновый двигатель мощностью в 5,5 лошадиных сил. Мотор заводится при помощи ручного тросика. Он приводит в действие фрезы со скоростью вращения до 120 оборотов за минуту.
• Вес МТД 240 составляет всего 42 кг.
• Объем бака рассчитан на 1,4 л бензина.
• В комплект поставки входят 4 фрезы с диаметром 30,5 см.

МТД Т/240 OHV 600

Это модификация МТД 240.

Она отличается легкостью отделения двигателя от рамы и редуктора. Для проведения этих работ нет необходимости в применении специального инструмента. Для сборки владельцу понадобится не более 1 минуты.

Мотоблок Т/240 OHV 600 отличается небольшим расходом топлива. Он составляет всего 0,8 л за час эксплуатации.

Он может проводить работы с дополнительным навесным оборудованием.

Вес Т/240 OHV 600 составляет всего 39 кг, а максимальная ширина культивации – 88 см.

МТД 330

Данный мотоблок имеет бензиновый четырехтактный двигатель Briggs&Stratton Power Build с мощностью 5,5 л.с.

• Тип запуска МТД 330: ручной.
• Наибольшая ширина захвата фрез составляет 61 см.
• Диаметр колес на этом устройстве — 20 см.
• Объем топливного бака увеличен до 2,8 л.
• В стандартную комплектацию входят набор фрез и пневматические колеса.
• Вес МТД 330 — 45 кг.
• МТД 330 может передвигаться только вперед.

МТД 380

Данный мотоблок оборудован бензиновым двигателем ThorX 55 на 5,5 лошадиных сил.

• В комплектацию уже входят 6 фрез, что позволяет увеличить ширину захвата до 81 см.
• Также в МТД 380 предусмотрен реверс, что позволяет передвигаться назад.
• Топливный бак рассчитан на 2,2 л бензина.
• Вес модели составляет 57 кг.

 Навесное оборудование

Мотоблоки МТД пользуются спросом благодаря своей универсальности. При помощи дополнительного навесного оборудования они способны автоматизировать большое количество сельскохозяйственных работ.

Фреза

Это основное навесное оборудование, которое поставляется со всеми моделями мотоблоков МТД.

Фрезы позволяют перемешивать верхний слой грунта и придавать ему однородность.

Наибольшая ширина захвата фрез и глубина их погружения у каждой модели МТД своя. Поэтому необходимо обращать на это внимание при выборе устройства.

Плуг

Мотоблоки МТД являются прочными и могут фрезами обрабатывать даже целину, однако при каменистой почве все-таки рекомендуется применять плуг.

Он входит в почву и раз за разом ее переворачивает. Оборотные плуги имеют особую конструкцию лемеха, который позволяет почве несколько раз перевернуться на нем, разбить крупные груды почвы, а только потом отбросить в сторону.

Косилка

К мотоблокам МТД можно подсоединить косилку. Эта навеска позволяет очищать участки с большими зарослями сорняков, или поддерживать в порядке уровень травы в парках и на газонах.

Самым распространенным вариантом косилки являются роторные, они срезают траву при помощи вращающихся ножей.

Окучник

Когда выращивается картофель его необходимо периодически окучивать, чтобы увеличить урожай. Мотоблоки МТД могут помочь в проведении этих работ.

Производитель предлагает дисковые окучники, которые при движении устройства вращаются и отбрасывают грунт на культуры.

Если под рукой нет окучника, то можно применять обычный плуг. Однако в этом случае необходимо быть предельно аккуратными, поскольку есть вероятность выкопать культуры раньше их созревания.

Картофелевыкапыватель

Мотоблоки МТД могут выкапывать картофель при помощи картофелекопалки. С виду он очень напоминает обыкновенный плуг с приваренными стальными прутьями.

Во время движения он подбирает пласт земли и направляет его на прутья, где они разбиваются и оставляют на поверхности только плоды.

Помпа

Огород необходимо периодически поливать для того, чтобы культуры росли и не завяли. Ранее для орошения земель использовались специальные насосы.

Сейчас мотоблок МТД с помпой могут проводить полив участка на расстоянии до 50 метров.

Адаптер и прицепы

При работе с мотоблоками МТД наступает быстрая усталость в силу того, что за ними необходимо передвигаться пешком. А это не всегда удобно, поэтому для облегчения работы владельцы приобретают адаптеры.

Они представляют собой специальные приставки с сиденьем, которые позволяют управлять мотоблоком МТД в сидячем положении.

При необходимости перевезти грузы без прицепа никак не обойтись. Максимальная грузоподъемность каждой модели МТД своя, однако, это значение минимум в 300 кг.

Опытные владельцы рекомендуют применять самосвальные варианты. Они помогут в проведении разгрузочных работ. Достаточно просто поднять прицеп спереди.

Колеса, грунтозацепы и гусеницы

В стандартной комплектации мотоблоки МТД идут вместе с пневматическими шинами для транспортировки и фрезами. Колеса также необходимо для работы с другим навесным оборудованием.

У мотоблоков МТД есть небольшой минус. Они легкие и устройство часто буксует.

Чтобы увеличить сцепление с поверхностью можно применять грунтозацепы. Их металлические пластины входят в поверхность и позволяют мотоблоку передвигаться стабильней.

В зимнее время года мотоблоки МТД будут скользить по поверхности льда. И в некоторых ситуациях управлять ими становится практически не возможно. Чтобы это исправить, можно применять гусеницы. Они увеличивают сцепление с поверхностью за счет большей площади контакта.

Утяжелители

Если у Вас нет грунтозацепов, а необходимо повысить сцепление мотоблока МТД, то это можно сделать при помощи установки дополнительных утяжелителей. Они производятся в виде блинов для штанги и вешаются на колесную ось.

Инструкция по эксплуатации

Прежде чем начать полноценное применение мотоблока МТД новым владельцам следует обратить внимание на инструкцию по эксплуатации. В ней приведены характеристики устройства, деталировка, принцип сборки, обкатки и технического обслуживания.

Первый пуск и обкатка

Залогом длительного применения мотоблоков МТД является правильное использование устройства на первых часах работы.

Не стоит думать, что Вы сможете сами собрать мотоблок МТД без инструкции по эксплуатации. Обязательно руководствуйтесь ею во время сборки.

Далее следует залить масло и бензин, поскольку в заводской комплектации они отсутствуют.

После этого наступает обкатка мотоблока МТД. Это время, в течение которого машина работает на минимальной мощности. Это делается для того, чтобы детали двигатели полностью смазались, вошли в пазы и притерлись друг к другу. Если дать сразу большую нагрузку на мотоблок МТД, то из-за большого трения есть вероятность тут же повредить детали.

Обкатка должна длиться около 6 часов. После этого необходимо заменить моторное масло, поскольку в нем за этот период собирается большое количество абразивных частиц.

Обслуживание

График проведения технических работ представлен в инструкции по эксплуатации к мотоблоку.

1. Моторное масло должно маняться через каждые 25 часов работы устройства. Производитель рекомендует применять всесезонные полусинтетические варианты с классификацией 10W-30.
2. В трансмиссии масло необходимо менять через 100 моточасов. В качестве свежей смазки рекомендуется применять Тап-15В или ТАД-17и.
3. Перед заменой масла обязательно слейте отработку.
4. Все мотоблоки МТД бензиновые. Они работают на топливе АИ-92 или АИ-95. Следует заливать только чистый и свежий бензин, поскольку устройства чувствительны к качеству горючего.

Основные неисправности и ремонт

Каждому владельцу мотоблоков МТД необходимо знать способы устранения наиболее часто встречаемых неисправностей:

Двигатель не включается:

• Нехватка топлива (при необходимости добавьте);
• Старый бензин (следует слить старый и добавить чистое новое горючее);
• Рычаг управления дроссельной заслонкой выставлен в неправильное положение (он должен находиться в положении «Start»)
• Рычаг управления воздушной заслонкой в неправильном положении (выставьте положение «Choke»);
• Высоковольтный провод отошел от свечи (проверьте соединение);
• На свече зажигания образовался нагар или изменился зазор между электродами (по ситуации: замените свечу или выставьте правильный зазор);
• Карбюратор «переливает» бензин (Поставьте рукоятку управления воздушной заслонкой в положение «Run» и запустите двигатель);
• Переключатель управления двигателя в положении «O» (для запуска мотора он должен находиться в положении I).

Двигатель работает не равномерно:

• Рукоятка управления дроссельной заслонкой находится в положении «Choke» (во время работы она должна быть в положении «Run»);
• Отходит контакт на свече зажигания (надежно закрепите провод);
• В бак с топливом попала грязь или вода (слейте старое топливо и залейте чистое);
• В топливном баке засорилось вентиляционное отверстие (очистите его);
• В карбюратор попала грязь (очистите топливную систему и произведите настройку карбюратора).

Видео обзоры

Вот как происходит работа мотоблока МТД Т 330 с плугом:

На следующем видео обзоре представлен процесс сборки и работы фрез мотоблоком МТД Т-240:

Отзывы владельцев

Вот что говорят на форумах те, кто сталкивался с эксплуатацией мотоблока МТД:

Станислав о работе МТД 380:

«Покупал для себя 8 лет назад. С тех пор особых поломок не было. Главное не экономить на масле (не покупать подвальные материалы) и бензине (не заливайте с грязью и пылью). Работой на своих 30 сотках доволен. С помощью навески произвожу выкопку картошки, окучивание, вспашку и фрезерование.

Плюсы: Высокое качество сборки и комплектующих, работает без сбоев и проблем

Минусы: Единственное растянулся ремень привода, можно отрегулировать, конечно, но хотел поменять на новый. Оригинальный пока не нашел, а китайское чудо покупать не хочу»

Игорь о МТД 330:

«Машиной доволен полностью. Пользуюсь уже два года. По тем временам стоил он не мало. Но мне нужен был ежедневный помощник, а не парадно-выходной. Поэтому экономить не стал. В силу малого веса идет мизерный расход топлива. Мотор работает тихо. Скорость работы легко регулировать. В общем тем, кто ищет надежного помощника, рекомендую.

Плюсы: Легкий пуск двигателя, никаких механических поломок за два года

Минусы: Не в каждый багажник поместиться. Для целины веса маловато, нужно утяжелять»

Safe Operation Practices • Set-Up • Operation • Maintenance • Service • Troubleshooting • Warranty

O

peratOr

’

s

M

anual

Automatic Lawn Tractor — Model Series 760

WARNING

READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL

BEFORE ATTEMPTING TO OPERATE THIS MACHINE.

FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.

MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019

Printed In USA Form No. 769-05684

(December 11, 2009)

2

To The Owner

1

Thank You

Thank you for purchasing a lawn tractor manufactured by

MTD LLC. It was carefully engineered to provide excellent performance when properly operated and maintained.

Please read this entire manual prior to operating the equipment.

It instructs you how to safely and easily set up, operate and maintain your machine. Please be sure that you, and any other persons who will operate the machine, carefully follow the recommended safety practices at all times. Failure to do so could result in personal injury or property damage.

All information in this manual is relative to the most recent product information available at the time of printing. Review this manual frequently to familiarize yourself with the machine, its features and operation. Please be aware that this Operator’s

Manual may cover a range of product specifications for various models. Characteristics and features discussed and/or illustrated in this manual may not be applicable to all models. MTD LLC reserves the right to change product specifications, designs and equipment without notice and without incurring obligation.

If you have any problems or questions concerning the machine, phone your local authorized MTD service dealer or contact us directly. MTD’s Customer Support telephone numbers, website address and mailing address can be found on this page. We want to ensure your complete satisfaction at all times.

Throughout this manual, all references to right and left side of the machine are observed from the operating position

The engine manufacturer is responsible for all engine-related issues with regards to performance, power-rating, specifications, warranty and service. Please refer to the engine manufacturer’s

Owner’s/Operator’s Manual, packed separately with your machine, for more information.

Table of Contents

Safe Operation Practices …………………………………. 3

Assembly & Set-Up ………………………………………….. 9

Controls & Features …………………………………………12

Operation ……………………………………………………….15

Maintenance & Adjustment…………………………….18

Service ………………………………………………………….. 22

Troubleshooting ……………………………………………. 27

Replacement Parts ………………………………………… 28

Attachments & Accessories ……………………………. 29

CA. Emission Control Statement …………………….. 30

Warranty ………………………………………………………. 32

Record Product Information

Before setting up and operating your new equipment, please locate the model plate on the equipment and record the information in the provided area to the right. You can locate the model plate by looking beneath the seat.

This information will be necessary, should you seek technical support via our web site, Customer Support Department, or with a local authorized service dealer.

M

Odel

n uMber s erial

n uMber

◊

◊

◊

Customer Support

Please do NOT return the machine to the retailer or dealer without first contacting our Customer Support Department.

If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of this machine, you can seek help from the experts. Choose from the options below:

Visit us on the web at www.mtdproducts.com

Call a Customer Support Representative at (800) 800-7310 or (330) 220-4683

Write us at MTD LLC • P.O. Box 361131 • Cleveland, OH • 44136-0019

Important Safe Operation Practices

2

WARNING!

This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury.

When you see this symbol. HEED ITS WARNING!

CALIFORNIA PROPOSITION 65

WARNING! Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to State of California to cause cancer and birth defects or other reproductive harm.

WARNING! Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Wash hands after handling

DANGER! This machine was built to be operated according to the safe operation practices in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

General Operation

1.

2.

3.

4.

5.

Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

Be familiar with all controls and their proper operation.

Know how to stop the machine and disengage them quickly.

Never allow children under 14 years of age to operate this machine. Children 14 and over should read and understand the instructions and safe operation practices in this manual and on the machine and should be trained and supervised by an adult.

Never allow adults to operate this machine without proper instruction.

To help avoid blade contact or a thrown object injury, keep bystanders, helpers, children and pets at least 75 feet from the machine while it is in operation. Stop machine if anyone enters the area.

6.

7.

8.

9.

10.

11.

Thoroughly inspect the area where the equipment is to be used. Remove all stones, sticks, wire, bones, toys, and other foreign objects which could be picked up and thrown by the blade(s). Thrown objects can cause serious personal injury.

Plan your mowing pattern to avoid discharge of material toward roads, sidewalks, bystanders and the like. Also, avoid discharging material against a wall or obstruction which may cause discharged material to ricochet back toward the operator.

Always wear safety glasses or safety goggles during operation and while performing an adjustment or repair to protect your eyes. Thrown objects which ricochet can cause serious injury to the eyes.

Wear sturdy, rough-soled work shoes and close-fitting slacks and shirts. Loose fitting clothes and jewelry can be caught in movable parts. Never operate this machine in bare feet or sandals.

Be aware of the mower and attachment discharge direction and do not point it at anyone. Do not operate the mower without the discharge cover or entire grass catcher in its proper place.

Do not put hands or feet near rotating parts or under the cutting deck. Contact with the blade(s) can amputate hands and feet.

3

4

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

A missing or damaged discharge cover can cause blade contact or thrown object injuries.

Stop the blade(s) when crossing gravel drives, walks, or roads and while not cutting grass.

Watch for traffic when operating near or crossing roadways. This machine is not intended for use on any public roadway.

Do not operate the machine while under the influence of alcohol or drugs.

Mow only in daylight or good artificial light.

Never carry passengers.

Disengage blade(s) before shifting into reverse. Back up slowly. Always look down and behind before and while backing to avoid a back-over accident.

Slow down before turning. Operate the machine smoothly.

Avoid erratic operation and excessive speed.

Disengage blade(s), set parking brake, stop engine and wait until the blade(s) come to a complete stop before removing grass catcher, emptying grass, unclogging chute, removing any grass or debris, or making any adjustments.

Never leave a running machine unattended. Always turn off blade(s), place transmission in neutral, set parking brake, stop engine and remove key before dismounting.

Use extra care when loading or unloading the machine into a trailer or truck. This machine should not be driven up or down ramp(s), because the machine could tip over, causing serious personal injury. The machine must be pushed manually on ramp(s) to load or unload properly.

Muffler and engine become hot and can cause a burn. Do not touch.

Check overhead clearances carefully before driving under low hanging tree branches, wires, door openings etc., where the operator may be struck or pulled from the machine, which could result in serious injury.

Disengage all attachment clutches, depress the brake pedal completely and shift into neutral before attempting to start engine.

Your machine is designed to cut normal residential grass of a height no more than 10”. Do not attempt to mow through unusually tall, dry grass (e.g., pasture) or piles of dry leaves.

Dry grass or leaves may contact the engine exhaust and/ or build up on the mower deck presenting a potential fire hazard.

Use only accessories and attachments approved for this machine by the machine manufacturer. Read, understand and follow all instructions provided with the approved accessory or attachment.

Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower-related injuries. These operators should evaluate their ability to operate the riding mower safely enough to protect themselves and others from serious injury.

If situations occur which are not covered in this manual, use care and good judgment. Contact your customer service representative for assistance.

Slope Operation

Slopes are a major factor related to loss of control and tip-over accidents which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it.

For your safety, use the slope gauge included as part of this manual to measure slopes before operating this machine on a sloped or hilly area. If the slope is greater than 15 degrees as shown on the slope gauge, do not operate this machine on that area or serious injury could result.

Do:

1.

2.

3.

4.

5.

6.

7.

Mow up and down slopes, not across. Exercise extreme caution when changing direction on slopes.

Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

Use slow speed. Choose a low enough speed setting so that you will not have to stop or shift while on the slope.

Tires may lose traction on slopes even though the brakes are functioning properly. Always keep machine in gear when going down slopes to take advantage of engine braking action.

Follow the manufacturer’s recommendations for wheel weights or counterweights to improve stability.

Use extra care with grass catchers or other attachments.

These can change the stability of the machine.

Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction. Rapid engagement or braking could cause the front of the machine to lift and rapidly flip over backwards which could cause serious injury.

Avoid starting or stopping on a slope. If tires lose traction, disengage the blade(s) and proceed slowly straight down the slope.

Do Not:

1. Do not turn on slopes unless necessary; then, turn slowly and gradually downhill, if possible.

2.

3.

4.

5.

6.

7.

Do not mow near drop-offs, ditches or embankments. The mower could suddenly turn over if a wheel is over the edge of a cliff, ditch, or if an edge caves in.

Do not try to stabilize the machine by putting your foot on the ground.

Do not use a grass catcher on steep slopes.

Do not mow on wet grass. Reduced traction could cause sliding.

Do not shift to neutral and coast downhill. Over-speeding may cause the operator to lose control of the machine resulting in serious injury or death.

Do not tow heavy pull behind attachments (e.g. loaded dump cart, lawn roller, etc.) on slopes greater than 5 degrees. When going down hill, the extra weight tends to push the tractor and may cause you to loose control

(e.g. tractor may speed up, braking and steering ability are reduced, attachment may jack-knife and cause tractor to overturn).

s ectiOn

2 — i

MpOrtant

s afe

O peratiOn

p ractices

Children

1. Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. They do not understand the dangers. Never assume that children will remain where you last saw them.

2. a. b. c. d. e. f. g.

Keep children out of the mowing area and in watchful care of a responsible adult other than the operator.

Be alert and turn machine off if a child enters the area.

Before and while backing, look behind and down for small children.

Never carry children, even with the blade(s) shut off.

They may fall off and be seriously injured or interfere with safe machine operation.

Use extreme care when approaching blind corners, doorways, shrubs, trees or other objects that may block your vision of a child who may run into the path of the machine.

To avoid back-over accidents, always disengage the cutting blade(s) before shifting into Reverse.

If equipped, the “Reverse Caution Mode” should not be used when children or others are around.

Keep children away from hot or running engines.

They can suffer burns from a hot muffler. h. Remove key when machine is unattended to prevent unauthorized operation.

Never allow children under 14 years of age to operate this machine. Children 14 and over should read and understand the instructions and safe operation practices in this manual and on the machine and should be trained and supervised by an adult.

Towing

1. Tow only with a machine that has a hitch designed for towing. Do not attach towed equipment except at the hitch point.

2.

3.

4.

5.

6.

7.

Follow the manufacturers recommendation for weight limits for towed equipment and towing on slopes.

Never allow children or others in or on towed equipment.

On slopes, the weight of the towed equipment may cause loss of traction and loss of control.

Always use extra caution when towing with a machine capable of making tight turns (e.g. “zero-turn” ride-on mower). Make wide turns to avoid jack-knifing.

Travel slowly and allow extra distance to stop.

Do not shift to neutral and coast downhill.

Service

Safe Handling of Gasoline:

1. To avoid personal injury or property damage use extreme care in handling gasoline. Gasoline is extremely

flammable and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes which can ignite. Wash your skin and change clothes immediately.

a. b. c. d. e. f. g.

Use only an approved gasoline container.

Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling.

When practical, remove gas-powered equipment from the truck or trailer and refuel it on the ground.

If this is not possible, then refuel such equipment on a trailer with a portable container, rather than from a gasoline dispenser nozzle.

Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

Extinguish all cigarettes, cigars, pipes and other sources of ignition.

Never fuel machine indoors.

Never remove gas cap or add fuel while the engine is hot or running. Allow engine to cool at least two minutes before refueling.

h. i. j. k. l. m.

Never over fill fuel tank. Fill tank to no more than ½ inch below bottom of filler neck to allow space for fuel expansion.

Replace gasoline cap and tighten securely.

If gasoline is spilled, wipe it off the engine and equipment. Move machine to another area. Wait 5 minutes before starting the engine.

To reduce fire hazards, keep machine free of grass, leaves, or other debris build-up. Clean up oil or fuel spillage and remove any fuel soaked debris.

Never store the machine or fuel container inside where there is an open flame, spark or pilot light as on a water heater, space heater, furnace, clothes dryer or other gas appliances.

Allow a machine to cool at least five minutes before storing.

General Service

1. Never run an engine indoors or in a poorly ventilated area.

Engine exhaust contains carbon monoxide, an odorless, and deadly gas.

2. Before cleaning, repairing, or inspecting, make certain the blade(s) and all moving parts have stopped. Disconnect the spark plug wire and ground against the engine to prevent unintended starting.

s ectiOn

2 — i

MpOrtant

s afe

O peratiOn

p ractices

5

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

Periodically check to make sure the blades come to complete stop within approximately (5) five seconds after operating the blade disengagement control. If the blades do not stop within the this time frame, your machine should be serviced professionally by an authorized MTD

Service Dealer.

Check brake operation frequently as it is subjected to wear during normal operation. Adjust and service as required.

Check the blade(s) and engine mounting bolts at frequent intervals for proper tightness. Also, visually inspect blade(s) for damage (e.g., excessive wear, bent, cracked). Replace the blade(s) with the original equipment manufacturer’s

(O.E.M.) blade(s) only, listed in this manual. “Use of parts which do not meet the original equipment specifications may lead to improper performance and compromise safety!”

Mower blades are sharp. Wrap the blade or wear gloves, and use extra caution when servicing them.

Keep all nuts, bolts, and screws tight to be sure the equipment is in safe working condition.

Never tamper with the safety interlock system or other safety devices. Check their proper operation regularly.

After striking a foreign object, stop the engine, disconnect the spark plug wire(s) and ground against the engine.

Thoroughly inspect the machine for any damage. Repair the damage before starting and operating.

Never attempt to make adjustments or repairs to the machine while the engine is running.

Grass catcher components and the discharge cover are subject to wear and damage which could expose moving parts or allow objects to be thrown. For safety protection, frequently check components and replace immediately with original equipment manufacturer’s (O.E.M.) parts only, listed in this manual. “Use of parts which do not meet the original equipment specifications may lead to improper performance and compromise safety!”

Do not change the engine governor settings or over-speed the engine. The governor controls the maximum safe operating speed of the engine.

Maintain or replace safety and instruction labels, as necessary.

Observe proper disposal laws and regulations for gas, oil, etc. to protect the environment.

According to the Consumer Products Safety Commission

(CPSC) and the U.S. Environmental Protection Agency (EPA), this product has an Average Useful Life of seven (7) years, or 270 hours of operation. At the end of the Average Useful

Life have the machine inspected annually by an authorized service dealer to ensure that all mechanical and safety systems are working properly and not worn excessively.

Failure to do so can result in accidents, injuries or death.

Do not modify engine

To avoid serious injury or death, do not modify engine in any way. Tampering with the governor setting can lead to a runaway engine and cause it to operate at unsafe speeds. Never tamper with factory setting of engine governor.

Notice Regarding Emissions

Engines which are certified to comply with California and federal

EPA emission regulations for SORE (Small Off Road Equipment) are certified to operate on regular unleaded gasoline, and may include the following emission control systems: Engine

Modification (EM), Oxidizing Catalyst (OC), Secondary Air

Injection (SAI) and Three Way Catalyst (TWC) if so equipped.

Spark Arrestor

WARNING!

This machine is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brushcovered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any).

If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required by law (Section 4442 of the California Public

Resources Code). Other states may have similar laws. Federal laws apply on federal lands.

A spark arrester for the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 361131 Cleveland, Ohio 44136-0019.

WARNING!

Your Responsibility—Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine.

SAVE THESE INSTRUCTIONS!

6 s ectiOn

2 — i

MpOrtant

s afe

O peratiOn

p ractices

Safety Symbols

This page depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate.

Symbol Description

READ THE OPERATOR’S MANUAL(S)

Read, understand, and follow all instructions in the manual(s) before attempting to assemble and operate

DANGER— ROTATING BLADES

Never carry passengers. Never carry children, even with the blades off.

DANGER— ROTATING BLADES

Always look down and behind before and while backing to avoid a back-over accident.

WARNING— ROTATING BLADES

Do not put hands or feet near rotating parts or under the cutting deck. Contact with the blade(s) can amputate hands and feet.

WARNING—THROWN OBJECTS

This machine may pick up and throw and objects which can cause serious personal injury.

WARNING—THROWN OBJECTS

This machine may pick up and throw and objects which can cause serious personal injury.

BYSTANDERS

Keep bystanders, helpers, children and pets at least 75 feet from the machine while it is in operation.

WARNING— SLOPE OPERATION

Do not operate this machine on a slope greater than 15 degrees.

WARNING— HOT SURFACE

Engine parts, especially the muffler, become extremely hot during operation. Allow engine and muffler to cool before touching.

DANGER — ROTATING BLADES

To reduce the risk of injury, keep hands and feet away. Do not operate unless discharge cover or grass catcher is in its proper place. If damaged, replace immediately.

WARNING— TOWING

Avoid jack-knifing when towing, go slow and make wide turns.

s ectiOn

2 — i

MpOrtant

s afe

O peratiOn

p ractices

7

Fold along dotted line (represents a 15° slope)

8 s ectiOn

2 — i

MpOrtant

s afe

O peratiOn

p ractices

Tractor Set-Up

NOTE: This Operators Manual covers a range of product specifications for various models. Characteristics and features discussed and/or illustrated in this manual may not be applicable to all models. MTD LLC reserves the right to change product specifications, designs and equipment without notice and without incurring obligation.

Connecting the Battery Cables

CALIFORNIA PROPOSITION 65 WARNING

:

Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Wash hands after handling.

CAUTION:

When attaching battery cables, always connect the POSITIVE (Red) wire to its terminal first, followed by the NEGATIVE (Black) wire.

NOTE: If the battery is put into service after the date shown on top/side of battery, charge the battery as instructed in the

Maintenance section your Operator’s Manual prior to operating the tractor.

Shipping Brace Removal

•

WARNING!

Make sure the riding mower’s engine is off, remove the ignition key, and set the parking brake before removing the shipping brace. Refer to the Controls and Features section for instructions on how to set the parking brake.

Locate the shipping brace, if present, and accompanying warning tag found on the right side of the mower, between the discharge chute and the cutting deck. See Fig. 3-2.

For shipping reasons, both battery cables on your equipment may have been left disconnected from the terminals at the factory. To connect the battery cables, proceed as follows:

NOTE: The positive battery terminal is marked Pos. (+). The negative battery terminal is marked Neg. (–).

1. Remove the plastic cover, if present, from the positive battery terminal and attach the red cable to the positive battery terminal (+) with the bolt and hex nut. See Fig. 3-1.

2.

3.

Figure 3-1

Remove the plastic cover, if present, from the negative battery terminal and attach the black cable to the negative battery terminal (–) with the bolt and hex nut. See Fig. 3-1.

Position the red rubber boot over the positive battery terminal to help protect it from corrosion.

•

•

Figure 3-2

Place the deck lift lever in the highest cutting position.

Refer to Setting the Cutting Height in the Operation section of this manual.

While pushing the discharge chute towards the machine with your left hand, remove the shipping brace with your right hand by grasping it between your thumb and index finger and rotating it clockwise.

WARNING!

The shipping brace, used for packaging purposes only, must be removed and discarded before operating your riding mower.

WARNING!

The mowing deck is capable of throwing objects. Failure to operate the riding mower without the discharge cover in the proper operating position could result in serious personal injury and/or property damage.

Attaching The Steering Wheel

If the steering wheel for your tractor did not come attached, the hardware for attaching it has been packed within the steering wheel, beneath the steering wheel cap. Carefully pry off the steering wheel cap and remove the hardware.

1.

2.

With the wheels of the tractor pointing straight forward, place the steering wheel over the steering shaft.

Place the washer (with the cupped side down) over the steering wheel and secure with the hex bolt. See Fig. 3-3.

Attaching The Dash Collar

If the tractor’s dash collar did not come attached from the factory, the screws for attaching it can be found in either side of the dash console. Remove the two screws from the console and secure the dash collar as illustrated in Fig 3-4.

3.

Figure 3-3

Place the steering wheel cap over the center of the steering wheel and push downward until it “clicks” into place.

Figure 3-4 s ectiOn

3— a sseMbly

& s et

-u p

Attaching The Seat

If the seat for your tractor was not attached at the factory, follow the applicable instructions below to attach it.

NOTE: For shipping reasons, some seats are not attached at the factory. If this is the case, free the seat from its shipping position and remove the hex screw (or knob screw if applicable) from the bottom of seat before proceeding with the following instructions.

1.

2.

Position the seat facing forward over the seat pivot bracket, with the two forward seat mount tabs fitting into the provided grooves in the seat pivot bracket.

Slide the seat rearward and align the center mounting hole in the seat with the slot in the seat pan. Insert the hex screw previously removed. Do not tighten at this point.

3.

4.

Adjust the seat to the optimal operator preferred location, this may mean actually sitting in the seat to decide what feels best to the operator. Keep in mind the operator needs to be able to fully operate all pedals comfortably while sitting back in the seat.

Tighten the hex screw at this time.

5. To adjust the position of the seat, loosen the hex screw on the bottom of the seat. Slide the seat forward or backward as desired. Retighten the hex screw. See Fig. 3-5.

Tire Pressure

WARNING!

Maximum tire pressure under any circumstances is 30 psi. Equal tire pressure should be maintained at all times. Never exceed the maximum inflation pressure shown on the sidewall of the tire.

The recommended operating tire pressure is:

• Approximately 10 psi for the rear tires

• Approximately 14 psi for the front tires

IMPORTANT:

Refer to the tire sidewall for exact tire manufacturer’s recommended or maximum psi. Do not overinflate. Uneven tire pressure could cause the cutting deck to mow unevenly.

Gas and Oil Fill-up

The gasoline tank is located under the hood. Do not overfill.

WARNING!

Use extreme care when handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Never fuel machine indoors or while the engine is hot or running. Extinguish cigarettes, cigars, pipes, and other sources of ignition.

Service the engine with gasoline and oil as instructed in the separate Engine Operator/Owner Manual packed with your tractor. Read the instructions carefully.

IMPORTANT: Your tractor is shipped with motor oil in the

engine. However, you MUST check the oil level before

operating. Be careful not to overfill.

For California Models:

For California models equipped with a tethered, ratcheting fuel cap, STOP filling tank once fuel is seen inside the filler neck. This ensures that a proper expansion volume is created, otherwise the fuel can overflow creating a hazardous situation. Do NOT top off the fuel tank. See Fig. 3-6.

Hex Screw

Adjust

Figure 3-5

Mulch Plug

Note: See the Attachments & Accessories section if you would like information regarding adding a mulching system for your model of tractor.

Figure 3-6 s ectiOn

3 — a sseMbly

& s et

-u p

Controls and Features

Speed Control &

Parking Brake Lever

Clutch/Brake Pedal

4

Throttle/Choke Lever

Ignition Switch

Module

Shift Lever

12

PTO (Blade Engage) Lever

Deck Lift Lever

Figure 4-1

Lawn Tractor controls and features are illustrated in Fig 4-1 and described on the following pages.

WARNING!

Read and follow all safety rules and instructions in this manual, including the entire Operation section, before attempting to operate this machine. Failure to comply with all safety rules and instructions may result in personal injury.

Throttle/Choke Control Lever

The throttle control lever is located on the right side of the tractor’s dash panel. This lever controls the speed of the engine and when pushed all the way forward, the choke control also.

When set in a given position, the throttle will maintain a uniform engine speed. See Fig. 4-2.

CHOKE

FAST

SLOW

Figure 4-2

IMPORTANT:

When operating the tractor with the cutting deck engaged, be certain that the throttle lever is always in the FAST

(rabbit) position.

Ignition Switch

The ignition switch is activated to start the engine. Insert key into the ignition switch and turn clockwise to the START position.

Release the key into the ON position once engine has fired. See

Fig. 4-3.

To stop the engine, turn the ignition key counterclockwise to the

OFF position. See Fig. 4-3.

WARNING!

Never leave a running machine unattended. Always disengage PTO, move shift lever into neutral position, set parking brake, stop engine and remove key to prevent unintended starting.

IMPORTANT:

Prior to operating the tractor, refer to both Safety

Interlock Switches and Starting The Engine in the Operation section of this manual for further detailed instructions.

Clutch-Brake Pedal

The clutch-brake pedal is located on the left side of the lawn tractor, along the running board. Depress the clutch-brake pedal part way down when slowing the tractor by changing speeds

(Refer to Speed Control Lever). Depress the pedal all the way down to engage the disc brake and bring the tractor to a complete stop.

NOTE: The pedal must be depressed to start the engine. Refer to

Safety Interlock Switches in the Operation section of this manual.

Parking Brake

To set the parking brake, fully depress the clutch-brake pedal.

Move the speed control lever all the way down and into the parking brake position. Release the clutch-brake pedal to allow the parking brake to engage.

To release the parking brake, depress the clutch-brake pedal and move the speed control lever out of the notches to the desired position. Release the speed control lever and the clutch-brake pedal.

NOTE: The parking brake must be set if the operator leaves the seat with the engine running or the engine will automatically shut off.

On

Start

Off

Figure 4-3 s ectiOn

4 — c

OntrOls and

f eatures

13

Shift Lever

The shift lever is located on the left side of the fender and has three positions, FORWARD, NEUTRAL and REVERSE. The brake pedal must be depressed and the tractor must not be in motion when the moving shift lever. See Fig. 4-4.

IMPORTANT:

Never force the shift lever. Doing so may result in serious damage to the tractor’s transmission.

Figure 4-4

Speed Control Lever

The speed control lever, located on the left side of the tractor’s dash console, allows you to regulate the ground speed of the lawn tractor. To use, depress the clutch-brake pedal and move the lever out of the parking brake notch and forward to increase the tractor’s ground speed. When a desired speed has been reached, release the lever into an appropriate notch to maintain that speed.

To slow the tractor’s ground speed, depress the clutch-brake pedal and move the speed control lever rearward and release it into a notch.

NOTE: Lawn tractors vary by model and are available with either a 6- or 7-speed control lever.

PTO (Blade Engage) Lever

Found on the tractor’s right fender, the PTO (blade

engage) lever is used to engage power to the cutting deck or other (separately available) attachments.

To operate, move the lever all the way forward.

Moving the lever all the way rearward into the PTO

OFF position disengages power to the cutting deck/ attachment.

NOTE: The PTO (blade engage) lever must be in the disengaged (PTO OFF) position when starting the engine.

Deck Lift Lever

Found on your tractor’s right fender, the deck lift lever is used to change the height of the cutting deck. To use, move the lever to the left, then place in the notch best suited for your application.

14 s ectiOn

4 — c

OntrOls and

f eatures

Safety Interlock Switches

This tractor is equipped with a safety interlock system for the protection of the operator. If the interlock system should ever malfunction, do not operate the tractor. Contact an authorized

MTD service dealer.

•

•

The safety interlock system prevents the engine from cranking or starting unless the parking brake is engaged, and the PTO (Blade Engage) lever is in the disengaged (OFF) position.

The engine will automatically shut off if the operator leaves the seat before engaging the parking brake.

•

•

The engine will automatically shut off if the operator leaves the tractor’s seat with the PTO (Blade Engage) lever in the engaged (ON) position, regardless of whether the parking brake is engaged.

The engine will automatically shut off if the PTO

(Blade

Engage) lever is moved into the engaged (ON) position with the shift lever in Reverse.

Engaging the Parking Brake

To engage the parking brake:

1. Fully depress the clutch-brake pedal and hold it down with your foot.

2.

3.

Move the speed control lever all the way down and into the parking brake position.

Release the clutch-brake pedal to allow the parking brake to engage.

To release the parking brake:

1. Depress the clutch-brake pedal and move the speed control lever out of the parking brake position and into a desired speed.

Setting the Cutting Height

1. Select the height position of the cutting deck by placing the deck lift lever in any of the six different cutting height notches on the right side of the fender.

WARNING!

Keep hands and feet away from the discharge opening of the cutting deck.

Starting the Engine

WARNING!

Do not operate the tractor if the interlock system is malfunctioning. This system was designed for your safety and protection.

3.

4.

5.

NOTE: Refer to the Gasoline and Oil fill-up instructions in the

Assembly & Set-up section of this manual.

1. Insert the tractor key into the ignition switch.

2. Place the PTO (Blade Engage) lever in the disengaged (OFF) position.

Engage the tractor’s parking brake.

Activate the choke control.

Turn the ignition key clockwise to the START position. After the engine starts, release the key. It will return to the ON (or

Normal Mowing) position.

CAUTION:

Do NOT hold the key in the START position for longer than ten seconds at a time. Doing so may cause damage to your engine’s electric starter.

6. After the engine starts, deactivate the choke control and place the throttle control in the FAST position.

NOTE: Do NOT leave the choke control on while operating the tractor. Doing so will result in a “rich” fuel mixture and cause the engine to run poorly.

Stopping the Engine

1.

2.

3.

WARNING!

If you strike a foreign object, stop the engine, disconnect the spark plug wire(s) and ground against the engine. Thoroughly inspect the machine for any damage. Repair the damage before restarting and operating

If the blades are engaged, place the PTO

(Blade Engage)

lever in the disengaged (OFF) position.

Turn the ignition key counterclockwise to the STOP position.

Remove the key from the ignition switch to prevent unintended starting.

Driving The Tractor

WARNING!

Avoid sudden starts, excessive speed and sudden stops.

WARNING!

Do not leave the seat of the tractor without first placing the PTO (Blade Engage) lever in the disengaged (OFF) position, depressing the brake pedal and engaging the parking brake. If leaving the tractor unattended, also turn the ignition key off and remove the key.

WARNING!

Always look down and behind before and while backing up to avoid a back-over accident.

1.

2.

3.

Depress the brake pedal to release the parking brake and let the pedal up.

Move the throttle lever into the FAST (rabbit) position.

Place the shift lever in either the FORWARD or REVERSE position.

IMPORTANT:

Do NOT use the shift lever to change the direction of travel when the tractor is in motion. Always use the brake pedal to bring the tractor to a complete stop before shifting.

4. Release the parking brake by depressing the clutch-brake pedal and positioning the speed control lever in desired position.

IMPORTANT:

First-time operators should use speed positions 1 or 2. Become completely familiar with the tractor’s operation and controls before operating the tractor in higher speed positions.

5.

6.

Release clutch-brake pedal slowly to put unit into motion.

The lawn tractor is brought to a stop by depressing the clutch-brake pedal.

NOTE: When operating the unit initially, there will be little difference between the highest two speeds until after the belts have seated themselves into the pulleys during the break-in period.

WARNING!

Before leaving the operator’s position for any reason, disengage the blades, place the shift lever in neutral, engage the parking brake, shut engine off and remove the key.

IMPORTANT:

When stopping the tractor for any reason while on a grass surface, always:

1.

2.

Place the shift lever in neutral,

Engage the parking brake,

1.

2.

3.

4.

3. Shut engine off and remove the key. Doing so will minimize the possibility of having your lawn ‘‘browned’’ by hot exhaust from your tractor’s running engine.

If unit stalls with speed control in high speed, or if unit will not operate with speed control lever in a low speed position, proceed as follows:

Place shift lever in NEUTRAL.

Restart engine.

Place speed control lever in highest speed position.

Release clutch-brake pedal fully.

5. Depress clutch-brake pedal.

s ectiOn

5— O peratiOn

6.

7.

Place speed control lever in desired position.

Place shift lever in either FORWARD or REVERSE, and follow normal operating procedures.

Driving On Slopes

•

•

Refer to the SLOPE GAUGE in the Important Safe Operation

Practices section of the manual to help determine slopes where you may operate the tractor safely.

WARNING!

Do not mow on inclines with a slope in excess of 15 degrees (a rise of approximately 2-1/2 feet

every 10 feet). The tractor could overturn and cause serious injury.

•

•

•

Mow up and down slopes, NEVER across.

Exercise extreme caution when changing direction on slopes.

Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

Avoid turns when driving on a slope. If a turn must be made, turn down the slope. Turning up a slope greatly increases the chance of a roll over.

Avoid stopping when driving up a slope. If it is necessary to stop while driving up a slope, start up smoothly and carefully to reduce the possibility of flipping the tractor over backward.

Engaging the Blades

Engaging the PTO (Blade Engage) transfers power to the cutting deck or other (separately available) attachments. To engage the blades, proceed as follows:

1.

2.

Move the throttle control lever to the FAST (rabbit) position.

Grasp the PTO (Blade Engage) lever and pivot it all the way forward into the engaged (ON) position.

3. Keep the throttle lever in the FAST (rabbit) position for the most efficient use of the cutting deck or other (separately

available) attachments.

The PTO (Blade Engage) lever must be in the disengaged (OFF) position when starting the engine, when traveling in reverse, and if the operator leaves the seat. Refer to Safety Interlock Switches in the Operation section of this manual.

Using the Deck Lift Lever

To raise the cutting deck, move the deck lift lever to the left, then place it in the notch best suited for your application. Refer to

Setting The Cutting Height earlier in this section.

Mowing

•

•

WARNING!

To help avoid blade contact or a thrown object injury, keep bystanders, helpers, children and pets at least 75 feet from the machine while it is in operation. Stop machine if anyone enters the area.

The following information will be helpful when using the cutting deck with your tractor:

•

WARNING!

Plan your mowing pattern to avoid discharge of materials toward roads, sidewalks, bystanders and the like. Also, avoid discharging material against a wall or obstruction which may cause discharged material to ricochet back toward the operator.

Do not mow at high ground speed, especially if a mulch kit or grass collector is installed.

•

•

•

•

For best results it is recommended that the first two laps be cut with the discharge thrown towards the center. After the first two laps, reverse the direction to throw the discharge to the outside for the balance of cutting. This will give a better appearance to the lawn.

Do not cut the grass too short. Short grass invites weed growth and yellows quickly in dry weather.

Mowing should always be done with the engine at full throttle.

Under heavier conditions it may be necessary to go back over the cut area a second time to get a clean cut.

Do NOT attempt to mow heavy brush and weeds and extremely tall grass. Your tractor is designed to mow lawns,

NOT clear brush.

Keep the blades sharp and replace the blades when worn.

Refer to Cutting Blades in the Service section of this manual for proper blade sharpening instructions.

s ectiOn

5 — O peratiOn

18

Maintenance & Adjustments

6

Maintenance

WARNING!

Before performing any maintenance or repairs, disengage PTO, move shift lever into neutral position, set parking brake, stop engine and remove key to prevent unintended starting.

Engine

Refer to the Engine Operator/Owner Manual for engine maintenance instructions.

Check engine oil level before each use as instructed in the Engine

Operator/Owner Manual packed with your unit. Follow the instructions carefully.

Changing Engine Oil

For draining oil from the engine’s crankcase of select model tractors, a plastic oil drain sleeve is packed with this Operator’s

Manual. To drain the oil, proceed as follows:

1.

2.

Unscrew the oil fill cap and remove the dipstick from the oil fill tube.

Snap the small end of oil drain sleeve onto the oil sump.

See Fig. 6-1.

Figure 6-1

3. Remove drain plug and drain oil into a suitable container with a capacity of no less than 64 oz.

Perform the above steps in the opposite order after oil has finished draining.

5. Refill the engine with new motor oil as instructed in the

Engine Operator/Owner Manual packed with your machine.

NOTE: Refer to the Engine Operator/Owner Manual packed with your unit for information regarding the quantity and proper viscosity of motor oil.

Air Cleaner

Service the air cleaner element as instructed in the Engine

Operator/Owner Manual packed with your unit.

Spark Plug

The spark plug should be cleaned and the gap reset once a season. Spark plug replacement is recommended at the start of each mowing season. Refer to the Engine Operator/Owner

Manual for correct plug type and gap specifications.

Lubrication

WARNING!

Before lubricating, repairing, or inspecting, always disengage PTO, move shift lever into neutral position, set parking brake, stop engine and remove key to prevent unintended starting.

Engine

Lubricate the engine with motor oil as instructed in the Engine

Owner Manual packed with your unit.

Pivot Points & Linkage

Lubricate all the pivot points on the drive system, parking brake and lift linkage at least once a season with light oil.

Rear Wheels

The rear wheels should be removed from the axles once a season. Lubricate the axles and the rims well with an all-purpose grease before re-installing them.

Front Axles

Each end of the tractor’s front pivot bar may be equipped with a grease fitting. Lubricate with a grease gun after every 25 hours of tractor operation.

Battery

The battery is sealed and is maintenance-free. Acid levels cannot be checked.

•

•

Always keep the battery cables and terminals clean and free of corrosive build-up.

After cleaning the battery and terminals, apply a light coat of petroleum jelly or grease to both terminals.

• Always keep the rubber boot positioned over the positive terminal to prevent shorting.

IMPORTANT:

If removing the battery for any reason, disconnect the NEGATIVE (Black) wire from it’s terminal first, followed by the POSITIVE (Red) wire. When re-installing the battery, always connect the POSITIVE (Red) wire its terminal first, followed by the NEGATIVE (Black) wire. Be certain that the wires are connected to the correct terminals; reversing them could change the polarity and result in damage to your engine’s alternating system.

Cleaning Battery

Clean the battery by removing it from the tractor and washing with a baking soda and water solution. If necessary, scrape the battery terminals with a wire brush to remove deposits. Coat terminals and exposed wiring with grease or petroleum jelly to prevent corrosion.

Battery Failures

Some common causes for battery failure are:

•

•

•

•

•

Incorrect initial activation

Overcharging

Freezing

Undercharging

Corroded connections

These failures are NOT covered by your tractor’s warranty.

Cleaning the Engine And Deck

Any fuel or oil spilled on the machine should be wiped off promptly. Do NOT allow debris to accumulate around the cooling fins of the engine or on any other part of the machine.

IMPORTANT:

The use of a pressure washer to clean your tractor is NOT recommended. It may cause damage to electrical components, spindles, pulleys, bearings or the engine.

Adjustments

WARNING!

Never attempt to make any adjustments while the engine is running, except where specified in the operator’s manual.

Leveling the Deck

NOTE: Check the tractor’s tire pressure before performing any deck leveling adjustments. Refer to Tires in the Service section of this manual for more information regarding tire pressure.

Front To Rear

The front of the cutting deck is supported by a stabilizer bar that can be adjusted to level the deck from front to rear. The front of the deck should be between ¼-inch and 3⁄8-inch lower than the rear of the deck. Adjust if necessary as follows:

1.

2.

3.

With the tractor parked on a firm, level surface, place the lever for lifting the platform on the second to the top notch

(second highest position) and rotate the blade as close to the discharge channel that is parallel to the tractor.

Measure the distance from the front of the blade tip to the ground and the rear of the blade tip to the ground.

The first measurement taken should be between ¼” and

3⁄8” less than the second measurement. Determine the approximate distance necessary for proper adjustment and proceed, if necessary, to the next step.

Locate the flange nut as seen in Fig. 6-2.

To level the deck from front to rear:

• Tighten the lock nut to raise the front of the deck;

• Loosen the lock nut to lower the front of the deck.

Flange Lock Nut

Figure 6-2

Side to Side

If the cutting deck appears to be mowing unevenly, a side to side adjustment can be performed. Adjust if necessary as follows:

1. With the tractor parked on a firm, level surface, place the deck lift lever in the second from the top notch (second

highest position) and rotate both blades so that they are perpendicular with the tractor.

2.

3.

Measure the distance from the outside of the left blade tip to the ground and the distance from the outside of the right blade tip to the ground. Both measurements taken should be equal. If they’re not, proceed to the next step.

Loosen, but do NOT remove, the hex cap screw on the left deck hanger bracket. See Fig. 6-3.

Hex Cap Screw

Figure 6-3 s ectiOn

6 — M aintenance

& a djustMents

19

4.

5.

Balance the deck by using a wrench to turn the adjustment gear (found immediately behind the hex cap

screw just loosened) clockwise/up or counterclockwise/ down. The deck is properly balanced when both blade tip measurements taken earlier are equal.

Retighten the hex cap screw on the left deck hanger bracket when proper adjustment is achieved.

Seat Adjustment

Refer to the Set-Up and Assembly section of this manual for seat adjustment instructions.

Parking Brake Adjustment

WARNING!

Never attempt to adjust the brakes while the engine is running. Always disengage PTO, move shift lever into neutral position, stop engine and remove key to prevent unintended starting.

If the tractor does not come to a complete stop when the brake pedal is completely depressed, or if the tractor’s rear wheels can roll with the parking brake applied, the brake is in need of adjustment. See an authorized MTD Service Dealer to have your brakes properly adjusted.

20 s ectiOn

6— M aintenance

& a djustMents

Maintenance Schedule

Clean Hood/Dash Louvers

Check Engine Oil Level

Check Air Filter for Dirty, Loose or Damaged Parts

Before

Each use

Every

10 Hours

P

P P

P

Every

25 Hours

Every

50 Hours

Every

100 Hours

Prior to Storing

P

Replace Air Filter Element

P

Change Engine Oil

P

Clean Battery Terminals

Lube Front Axles and Rims

Clean Engine Cooling Fins

Lube Pedal Pivot Points

Check Spark Plug Condition & Gap

Replace Fuel Filter

P

P

P

P

P

P P

P

P

P

P

NOTE: This Operators Manual covers a range of product specifications for various models. Characteristics and features discussed and/ or illustrated in this manual may not be applicable to all models. MTD LLC reserves the right to change product specifications, designs and equipment without notice and without incurring obligation.

IMPORTANT:

Since this manual covers a range of various tractor models, it is important to consult the specific engine operator’s manual included with this machine for detailed engine maintenance procedures and intervals.

s ectiOn

6 — M aintenance

& a djustMents

21

Cutting Deck Removal

NOTE: Models equipped with a 38-inch deck have one deck idler pulley. Models equipped with a 42- and 46-inch deck have two deck idler pulleys.

To remove the cutting deck, proceed as follows:

1. Place the PTO (Blade Engage) lever in the disengaged (OFF) position and engage the parking brake.

2. Lower the deck by moving the deck lift lever into the bottom notch on the right fender.

3. Remove the belt-keeper rod, from around the tractor’s engine pulley, by removing the self-tapping screw (A) that secures it. See Fig. 7-1.

Note: Make a mental note what hole the other end of the beltkeeper rod is inserted in for reinstallation purposes.

Bow-Tie Pin

8.

Figure 7-2

Gently slide the cutting deck toward the front of the tractor carefully guiding the hooks on the deck off of the deck stabilizer rod. See Fig. 7-3

C

B

A

4.

5.

6.

7.

Figure 7-1

Remove the belt (C) from around the tractor’s engine pulley. See

Fig. 7-1.

Looking at the cutting deck from the left side of the tractor, locate the bow-tie pin that secures the deck support rod on the rear left side of the deck. See Fig. 7-2. Remove the bowtie pin that secures the deck support rod, and carefully remove the deck support from the deck lift arm.

Repeat step 5 on the tractor’s right side.

Move the deck lift lever into the top notch on the right fender to raise the deck lift arms up and out of the way.

9.

10.

Figure 7-3

Carefully remove the PTO cable from the rear of the cutting deck by removing the hair pin clip which secures it. Remove the spring from the deck idler bracket. See Fig. 7-4 on the next page.

Gently slide the cutting deck (from the left side) out from underneath the tractor.

4. Make the final connection on the engine block of the tractor, away from the battery. Attach to a unpainted part to assure a good connection.

CAUTION:

If the jumper battery is installed on a vehicle (i.e. car, truck), do NOT start the vehicle’s engine when jump starting your tractor.

Tires

Figure 7-4

WARNING!

Never exceed the maximum inflation pressure shown on the sidewall of tire.

The recommended operating tire pressure is:

• Approximately 10 psi for the rear tires

• Approximately 14 psi for the front tires

IMPORTANT:

Refer to the tire sidewall for exact tire manufacturer’s recommended or maximum psi. Do not overinflate. Uneven tire pressure could cause the cutting deck to mow unevenly.

Battery

CALIFORNIA PROPOSITION 65 WARNING

!

Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Wash hands after handling.

CAUTION:

If removing the battery, disconnect the

NEGATIVE (Black) wire from it’s terminal first, followed by the POSITIVE (Red) wire. When reinstalling the battery, always connect the POSITIVE

(Red) wire its terminal first, followed by the

NEGATIVE (Black) wire.

Jump Starting

1.

2.

3.

WARNING!

Never jump start a damaged or frozen battery. Be certain the vehicles do not touch, and ignitions are off. Do not allow cable clamps to touch.

Connect positive ( +) cable to positive post (+) of your tractor’s discharged battery.

Connect the other end of the cable to the (positive

+) post of the jumper battery.

Connect the second cable (negative –) to the other post of the jumper battery.

5.

6.

Start the tractor (as instructed in the Operation section of this manual).

Set the tractor’s parking brake before removing the jumper cables, in reverse order of connection.

Charging

WARNING!

Batteries give off an explosive gas while charging. Charge the battery in a well ventilated area and keep away from an open flame or pilot light as on a water heater, space heater, furnace, clothes dryer or other gas appliances.

CAUTION:

When charging your tractor’s battery, use only a charger designed for 12V lead-acid batteries. Read your battery charger’s Owner’s

Manual prior to charging your tractor’s battery.

Always follow its instructions and heed its warnings.

If your tractor has not been put into use for an extended period of time, charge the battery as follows:

1. Set your battery charger to deliver a max of 10 amperes.

If your battery charger is automatic, charge the battery until the charger indicates that charging is complete. If the charger is not automatic, charge for no fewer than eight hours.

Fuse

One 20 AMP fuse is installed in your tractor’s wiring harness to protect the tractor’s electrical system from damage caused by excessive amperage.

If the electrical system does not function, or your tractor’s engine will not crank, first check to be certain that the fuse has not blown. It can be found at the rear of the unit, underneath the fender located by the battery.

WARNING!

Always use a fuse with the same amperage capacity for replacement.

s ectiOn

7 — s ervice

Cutting Blades

WARNING!

Shut the engine off and remove ignition key before removing the cutting blade(s) for sharpening or replacement. Protect your hands by using heavy gloves when grasping the blade.

WARNING!

Periodically inspect the blade and/or spindle for cracks or damage, especially after you’ve struck a foreign object. Do not operate the machine until damaged components are replaced.

To remove the blades, proceed as follows.

1. Remove the deck from beneath the tractor, (refer to

Cutting Deck Removal earlier in this section) then gently flip the deck over to expose its underside.

2. Place a block of wood between the center deck housing baffle and the cutting blade to act as a stabilizer.

See Fig. 7-5.

3. Remove the hex flange nut that secures the blade to the spindle assembly. See Fig. 7-5.

1-5/8 in ch

(min.)

Figure 7-6

NOTE: When replacing the blade, be sure to install the blade with the side of the blade marked ‘‘Bottom’’ (or with a part number stamped in it) facing the ground when the mower is in the operating position.

CAUTION:

Use a torque wrench to tighten the blade spindle hex flange nut to between 70 lbs-ft and 90 lbs-ft.

4.

Figure 7-5

To properly sharpen the cutting blades, remove equal amounts of metal from both ends of the blades along the cutting edges, parallel to the trailing edge, at a 25°- to 30° angle.

Always grind each cutting blade edge equally to maintain proper blade balance. See Fig. 7-6.

CAUTION:

If the cutting edge of the blade has previously been sharpened, or if any metal separation is present, replace the blades with new ones.

WARNING!

A poorly balanced blade will cause excessive vibration, may cause damage to the tractor and/or result in personal injury.

5. Test the blade’s balance using a blade balancer. Grind metal from the heavy side until it balances evenly.

s ectiOn

7— s ervice

Changing the Deck Belt

WARNING!

Be sure to shut the engine off, remove ignition key, disconnect the spark plug wire(s) and ground against the engine to prevent unintended starting before removing the belt.

WARNING!

All belts on your tractor are subject to wear and should be replaced if any signs of wear are present.

IMPORTANT:

The V-belt found on your tractor is specially designed to engage and disengage safely. A substitute (non-

OEM) V-belt can be dangerous by not disengaging completely.

For a proper working machine, use factory approved belts.

To change or replace the deck belt on your tractor, proceed as follows:

1.

2.

3.

5.

Lower the deck by moving the deck lift lever into the bottom notch on the right fender.

Remove the belt guards by removing the self-tapping screws that fasten them to the deck. See Fig. 7-7.

Remove the belt keeper rod from around the engine pulley.

WARNING!

Avoid the possibility of a pinching injury. Do not place your fingers on the idler spring or between the belt and a pulley while removing the belt.

Remove the deck belt from around all pulleys, including the deck idler pulley.

6.

7.

Route the new belt as shown in and Fig. 7-7.

Remount the belt guards removed earlier.

Changing the Transmission Drive Belt

NOTE: Several components must be removed and special tools

(i.e. air/impact wrench) in order to change the tractor’s drive belt.

See an authorized MTD Service Dealer to have your drive belt replaced or phone Customer Support as instructed on page 2 for information on ordering a Service Manual.

Engine Pulley

Belt Guard

Idler Bracket

Deck Idler Pulley

Figure 7-7 s ectiOn

7 — s ervice

26

Troubleshooting

Problem

Engine fails to start 1.

Cause

PTO/Blade engaged.

Engine runs erratic

Uneven cut

2. Spark plug wire disconnected.

3. Fuel tank empty, or stale fuel.

4. Choke not activated.

5. Faulty spark plug.

6. Blocked fuel line.

7. Engine flooded.

8. Parking brake not engaged

9. Throttle control lever not in correct starting position.

1. Unit running with CHOKE activated.

2. Spark plug wires loose.

3. Blocked fuel line or stale fuel.

Engine overheats

4. Vent in gas cap plugged.

5. Water or dirt in fuel system.

6. Dirty air cleaner.

1. Engine oil level low.

Engine hesitates at high

RPM

Engine Idles rough

Excessive vibration

Mower will not mulch grass

2. Air flow restricted.

1. Spark plug gap too close.

1. Spark plug fouled, faulty or gap too wide.

2. Dirty air cleaner.

1. Cutting blade loose or unbalanced.

2. Damaged or bent cutting blade.

1. Engine speed too low.

2. Wet grass.

3. Excessively high grass.

4. Dull blade.

1. Deck not leveled properly.

2. Dull blade.

3. Uneven tire pressure.

1.

Remedy

Place knob (or lever) in disengaged (OFF) position.

2. Connect wire to spark plug.

3. Fill tank with clean, fresh (less than 30 days old) gas.

4. Place the throttle control in CHOKE position.

5. Clean, adjust gap or replace plug.

6. Clean fuel line and replace fuel filter.

7. Crank engine with throttle in FAST position.

8. Engage parking brake.

9. Place throttle lever to FAST position.

8

1. Move the throttle contol out of the CHOKE position.

2. Connect and tighten spark plug wire.

3. Clean fuel line; fill tank with clean, fresh gasoline and replace fuel filter, is so equipped.

4. Clear vent or replace cap if damaged.

5. Drain fuel tank. Refill with clean, fresh gasoline.

6. Replace air cleaner paper element or clean foam precleaner, is so equipped.

1. Fill crankcase with proper amount and weight of oil.

2. Clean grass clippings and debris from around the engine’s cooling fins and blower housing.

1. Remove spark plug and reset the gap.

1. Replace spark plug. Set plug gap.

2. Replace air cleaner element and/or clean pre-cleaner, if so equipped.

1. Tighten blade and spindle. Balance blade.

2. Replace blade.

1. Place throttle in FAST (rabbit) position.

2. Do not mulch when grass is wet.

3. Mow once at a high cutting height, then mow again at desired height or make a narrower cutting swath.

4. Sharpen or replace blade.

1. Perform side-to-side deck adjustment.

2. Sharpen or replace blade.

3. Check tire pressure in all four tires.

Replacement Parts

DESCRIPTION

Drive Belt (Mowing Deck) 38” Deck

Deck Blade (38” Deck)

Deck Spindle (38” Deck)

Battery

Tire (Front) 13 x 5 x 6 Round Shoulder

Tire (Rear) 18 x 6.5 x 8 Square Shoulder

Fuel Tank Cap

Fuel Tank Cap (CA Models)

Throttle Control/Choke Cable (Single Cylinder Engines)

Discharge Chute Assembly 38” Deck

Key

PART NO.

954-04062

942-0610A

918-04474A

925-1707D

734-04372

734-0294

751-0603A

751-10947

746-04364

931-1032B

925-1745A

9

NOTE: This Operators Manual covers a range of product specifications for various models. Characteristics and features discussed and/ or illustrated in this manual may not be applicable to all models. MTD LLC reserves the right to change product specifications, designs and equipment without notice and without incurring obligation.

NOTE: Download a complete Parts Manual free of charge at www.mtdproducts.com or phone (800) 800-7310 to purchase a Parts

Manual. Be sure to have your model number and serial number ready. These can be found on the model plate located under the seat.

Refer to page 2 for more information regarding locating your model and serial numbers.

27

28

Attachments & Accessories

10

The following attachments and accessories are compatible for Model Series 700 Lawn Tractors. See the retailer from which you purchased your tractor, an authorized MTD Service Dealer or phone (800) 800-7310 for information regarding price and availability.

CAUTION:

Model

Series 700 Lawn Tractors are NOT designed for use with any type of ground-engaging attachments (e.g. tiller or plow). Use of this type of equipment WILL void the tractor’s warranty.

Model Number

OEM-190-116

OEM-190-607

OEM-190-679

OEM-190-183

OEM-190-180A

OEM-190-032

OEM-190-833

OEM-19A-218

Description

38-inch Deck Mulch Kit

Deluxe Tractor Sunshade

Bumper

Deck Wheel Kit 38”

Double Bagger Kit 38”

42” Snow Thrower

46” Snow Blade

Rear Weight Bracket Kit

Notes

11

29

FEDERAL and/or CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT

YOUR WARRANTY RIGHTS AND OBLIGATIONS

MTD Consumer Group Inc, the United States Environmental Protection Agency (EPA), and, for those products certified for sale in the state of California, the

California Air Resources Board (CARB) are pleased to explain the emission (evaporative and/or exhaust) control system (ECS) warranty on your outdoor 2006 and later small off-road spark-ignited engine and equipment (outdoor equipment engine) In California, new outdoor equipment engines must be designed, built and equipped to meet the State’s stringent anti-smog standards (in other states, 1997 and later model year equipment must be designed, built, and equipped to meet the U.S. EPA small off-road, spark ignition engine regulations. MTD Consumer Group Inc must warrant the ECS on your outdoor equipment engine for the period of time listed below provided there has been no abuse, neglect or improper maintenance of outdoor equipment engine.

Your ECS may include parts such as the carburetor, fuel-injection system, the ignition system, catalytic converter, fuel tanks, fuel lines, fuel caps, valves, canisters, filters, vapor hoses, clamps, connectors, and other associated emission-related components.

Where a warrantable condition exists, MTD Consumer Group Inc will repair your outdoor equipment engine at no cost to you including diagnosis, parts and labor.

MANUFACTURER’S WARRANTY COVERAGE:

This emission control system is warranted for two years. If any emission-related part on your outdoor equipment engine is defective, the part will be repaired or replaced by MTD CONSUMER GROUP INC.

OWNER’S WARRANTY RESPONSIBILITIES:

As the outdoor equipment engine owner, you are responsible for performance of the required maintenance listed in your owner’s manual. MTD Consumer Group

Inc recommends that you retain all receipts covering maintenance on your outdoor equipment engine, but MTD Consumer Group Inc cannot deny warranty solely for the lack of receipts.

As the outdoor equipment engine owner, you should however be aware that MTD Consumer Group Inc may deny you warranty coverage if your outdoor equipment engine or a part has failed due to abuse, neglect, or improper maintenance or unapproved modifications.

You are responsible for presenting your outdoor equipment engine to MTD Consumer Group Inc’s distribution center or service center as soon as the problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. If you have a question regarding your warranty coverage, you should contact the MTD Consumer Group Inc Service Department at 1-800-800-7310 or via email at http://support.mtdproducts.com

GENERAL EMISSIONS WARRANTY COVERAGE:

MTD Consumer Group Inc warrants to the ultimate purchaser and each subsequent purchaser that the outdoor equipment engine is: Designed, built and equipped so as to conform with all applicable regulations; and free from defects in materials and workmanship that cause the failure of a warranted part to be identical in all material respects to that part as described in MTD Consumer Group Inc’s application for certification.

The warranty period begins on the date the outdoor equipment engine is delivered to an ultimate purchaser or first placed into service. The warranty period is two years.

Subject to certain conditions and exclusions as stated below, the warranty on emission-related parts is as follows:

1.

2.

Any warranted part that is not scheduled for replacement as required maintenance in the written instructions supplied, is warranted for the warranty period stated above. If the part fails during the period of warranty coverage, the part will be repaired or replaced by MTD Consumer Group Inc according to subsection

(4) below. Any such part repaired or replaced under warranty will be warranted for the remainder of the period.

Any warranted part that is scheduled only for regular inspection in the written instructions supplied is warranted for the warranty period stated above. Any such part repaired or replaced under warranty will be warranted for the remaining warranty period.

3. Any warranted part that is scheduled for replacement as required maintenance in the written instructions supplied is warranted for the period of time before the first scheduled replacement date for that part. If the part fails before the first scheduled replacement, the part will be repaired or replaced by MTD Consumer

Group Inc according to subsection (4) below. Any such part repaired or replaced under warranty will be warranted for the remainder of the period prior to the first scheduled replacement point for the part.

Repair or replacement of any warranted part under the warranty provisions herein must be performed at a warranty station at no charge to the owner.

4.

5.

6.

7.

8.

Notwithstanding the provisions herein, warranty services or repairs will be provided at all of our distribution centers that are franchised to service the subject engines or equipment.

The outdoor equipment engine owner will not be charged for diagnostic labor that is directly associated with diagnosis of a defective, emission-related warranted part, provided that such diagnostic work is performed at a warranty station.

MTD Consumer Group Inc is liable for damages to other engine or equipment components proximately caused by a failure under warranty of any warranted part.

Throughout the off-road engine and equipment warranty period stated above, MTD Consumer Group Inc will maintain a supply of warranted parts sufficient to meet the expected demand for such parts.

9. Any replacement part may be used in the performance of any warranty maintenance or repairs and must be provided without charge to the owner. Such use will not reduce the warranty obligations of MTD Consumer Group Inc.

10. Add-on or modified parts that are not exempted by the Air Resources Board may not be used. The use of any non-exempted add-on or modified parts by the ultimate purchaser will be grounds for disallowing a warranty claims. MTD Consumer Group Inc will not be liable to warrant failures of warranted parts caused by the use of a non-exempted add-on or modified part.

WARRANTED PARTS:

The repair or replacement of any warranted part otherwise eligible for warranty coverage may be excluded from such warranty coverage if MTD Consumer Group

Inc demonstrates that the outdoor equipment engine has been abused, neglected, or improperly maintained, and that such abuse, neglect, or improper maintenance was the direct cause of the need for repair or replacement of the part. That notwithstanding, any adjustment of a component that has a factory installed, and properly operating, adjustment limiting device is still eligible for warranty coverage. Further, the coverage under this warranty extends only to parts that were present on the off-road engine and equipment purchased.

The following emission warranty parts are covered (if applicable):

(1) Fuel Metering System

•

•

•

Cold start enrichment system (soft choke)

Carburetor and internal parts (or fuel injection system)

Fuel pump

• Fuel tank

(2) Air Induction System

•

•

Air cleaner

Intake manifold

(3) Ignition System

• Spark plug(s)

• Magneto ignition system

(4) Exhaust System

•

•

Catalytic converter

SAI (Reed valve)

(5) Miscellaneous Items Used in Above System

•

•

Vacuum, temperature, position, time sensitive valves and switches

Connectors and assemblies

(6) Evaporative Control

• Fuel hose

•

•

•

Fuel hose clamps

Tethered fuel cap

Carbon canister

• Vapor lines

GDOC-100223

MANUFACTURER’S LIMITED WARRANTY FOR

The limited warranty set forth below is given by MTD LLC with respect to new merchandise purchased and used in the United States and/or its territories and possessions, and by MTD Products Limited with respect to new merchandise purchased and used in Canada and/ or its territories and possessions (either entity respectively, “MTD”).

“MTD” warrants this product (excluding its Normal Wear Parts and

Attachments as described below) against defects in material and workmanship for a period of two (2) years commencing on the date of original purchase and will, at its option, repair or replace, free of charge, any part found to be defective in materials or workmanship.

This limited warranty shall only apply if this product has been operated and maintained in accordance with the Operator’s Manual furnished with the product, and has not been subject to misuse, abuse, commercial use, neglect, accident, improper maintenance, alteration, vandalism, theft, fire, water, or damage because of other peril or natural disaster. Damage resulting from the installation or use of any part, accessory or attachment not approved by MTD for use with the product(s) covered by this manual will void your warranty as to any resulting damage.

Normal Wear Parts are warranted to be free from defects in material and workmanship for a period of thirty (30) days from the date of purchase. Normal wear parts include, but are not limited to items such as: batteries, belts, blades, blade adapters, tines, grass bags, wheels, rider deck wheels, seats, snow thrower skid shoes, friction wheels, shave plates, auger spiral rubber and tires.

Attachments — MTD warrants attachments for this product against defects in material and workmanship for a period of one (1) year, commencing on the date of the attachment’s original purchase or lease. Attachments include, but are not limited to items such as: grass collectors and mulch kits.

HOW TO OBTAIN SERVICE:

Warranty service is available, WITH

PROOF OF PURCHASE, through your local authorized service dealer.

To locate the dealer in your area:

In the U.S.A.

Check your Yellow Pages, or contact MTD LLC at P.O. Box 361131,

Cleveland, Ohio 44136-0019, or call 1-800-800-7310, 1-330-220-

4683 or log on to our Web site at www.mtdproducts.com.

In Canada

Contact MTD Products Limited, Kitchener, ON N2G 4J1, or call 1-800-

668-1238 or log on to our Web site at www.mtdcanada.com.

This limited warranty does not provide coverage in the following cases: a. The engine or component parts thereof. These items may carry a separate manufacturer’s warranty. Refer to applicable manufacturer’s warranty for terms and conditions.

b. Log splitter pumps, valves, and cylinders have a separate one- year warranty.

c. Routine maintenance items such as lubricants, filters, blade sharpening, tune-ups, brake adjustments, clutch adjustments, deck adjustments, and normal deterioration of the exterior finish due to use or exposure.

d. Service completed by someone other than an authorized service dealer.

e. MTD does not extend any warranty for products sold or exported outside of the United States and/or Canada, and their respective possessions and territories, except those sold through MTD’s authorized channels of export distribution.

f. Replacement parts that are not genuine MTD parts.

g. Transportation charges and service calls.

h. MTD does not warrant this product for commercial use.

No implied warranty, including any implied warranty of merchantability of fitness for a particular purpose, applies after the applicable period of express written warranty above as to the parts as identified. No other express warranty, whether written or oral, except as mentioned above, given by any person or entity, including a dealer or retailer, with respect to any product, shall bind MTD. During the period of the warranty, the exclusive remedy is repair or replacement of the product as set forth above.

The provisions as set forth in this warranty provide the sole and exclusive remedy arising from the sale. MTD shall not be liable for incidental or consequential loss or damage including, without limitation, expenses incurred for substitute or replacement lawn care services or for rental expenses to temporarily replace a warranted product.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you.

In no event shall recovery of any kind be greater than the amount of the purchase price of the product sold. Alteration of safety features of

the product shall void this warranty.

You assume the risk and liability for loss, damage, or injury to you and your property and/or to others and their property arising out of the misuse or inability to use the product.

This limited warranty shall not extend to anyone other than the original purchaser or to the person for whom it was purchased as a gift.

HOW STATE LAW RELATES TO THIS WARRANTY:

This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

IMPORTANT:

Owner must present Original Proof of Purchase to obtain warranty coverage.

MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019; Phone: 1-800-800-7310, 1-330-220-4683

MTD Canada Limited — KITCHENER, ON N2G 4J1; Phone 1-800-668-1238

GDOC-100015 REV. B