Pioneer deh 1600 uba инструкция

В чем разница между FM и AM?

Когда звук считается слишком громким?

Автомобильный радиоприемник не включается, что делать?

Как лучше всего выполнять чистку автомагнитола?

Инструкция Pioneer DEH-1600UBA доступно в русский?

Black plate (1,1)

CD RDS RECEIVER

AUTORADIO CD RDS

SINTOLETTORE CD RDS

English NederlandsDeutschEspañolItalianoFrançais Русский

REPRODUCTOR DE CD CON RECEPTOR RDS

CD RDS-EMPFÄNGER

CD RDS-ONTVANGER

CD RDS ПРИЕМНИК

Owner’s Manual

Mode d’emploi

DEH-1600UB

Manuale d’istruzioni

Manual de instrucciones

DEH-1600UBG

Bedienungsanleitung

Handleiding

DEH-1600UBA

Руководство пользователя

DEH-1600UBB

<QRD3204-A>1

Black plate (2,1)

Section

01

Before you start

Before you start

Thank you for purchasing this PIONEER

About this unit

CAUTION

product

The tuner frequencies on this unit are allocated

This product is a class 1 laser product classi-

To ensure proper use, please read through this

for use in Western Europe, Asia, the Middle

fied under the Safety of laser products, IEC

manual before using this product. It is especially

East, Africa and Oceania. Use in other areas

60825-1:2007.

important that you read and observe WARN-

may result in poor reception. The RDS (radio

INGs and CAUTIONs in this manual. Please

data system) function only works in areas that

keep the manual in a safe and accessible place for

broadcast RDS signals for FM stations.

future reference.

WARNING

! Do not attempt to install or service this

If you experience problems

product by yourself. Installation or serv-

Should this unit fail to work properly, please con-

icing of this product by persons without

tact your dealer or nearest authorized PIONEER

training and experience in electronic

Service Station.

equipment and automotive accessories

If you want to dispose this product, do not

may be dangerous and could expose you

mix it with general household waste. There is

to the risk of electric shock, injury or

a separate collection system for used elec-

other hazards.

tronic products in accordance with legislation

! Do not attempt to operate the unit while driv-

that requires proper treatment, recovery and

ing. Make sure to pull off the road and park

recycling.

your vehicle in a safe location before at-

tempting to use the controls on the device.

Private households in the member states of the

EU, in Switzerland and Norway may return their

CAUTION

used electronic products free of charge to desig-

! Do not allow this unit to come into contact

nated collection facilities or to a retailer (if you

with liquids. Electrical shock could result.

purchase a similar new one).

Also, damage to this unit, smoke, and over-

For countries not mentioned above, please con-

heating could result from contact with

tact your local authorities for the correct method

liquids.

of disposal.

! The Pioneer CarStereo-Pass is for use only in

By doing so you will ensure that your disposed

Germany.

product undergoes the necessary treatment, re-

! Always keep the volume low enough to hear

covery and recycling and thus prevent potential

outside sounds.

negative effects on the environment and human

! Avoid exposure to moisture.

health.

2

En

<QRD3204-A>2

Black plate (3,1)

Head unit

2

3

71 4 6

9

a de

5

8

c

b

Display indication

21 3 75

1 h (eject)

2 SRC/OFF

3 MULTI-CONTROL (M.C.)

4

(list)

5 DISP

6 Disc loading slot

7 USB port

8 EQ

9 BAND

a

(back)/DIMMER (dimmer)

b c/d

c 1/

to 6/

d AUX input jack (3.5 mm stereo jack)

e Detach button

CAUTION

Use an optional Pioneer USB cable (CD-U50E)

to connect the USB storage device as any device

connected directly to the unit will protrude out

from the unit, which could be dangerous.

9

Section

Using this unit

Using this unit

02

# If you prefer not to set up at this time, turn M.C.

5 To finish your settings, turn M.C. to select

to switch to NO.

YES.

English

4 6 8

# If you prefer to change your setting again, turn

3 Press M.C. to select.

M.C. to switch to NO.

4 Follow these steps to set the menu.

6 Press M.C. to select.

To proceed to the next menu option, you need to

Notes

confirm your selection.

a

! You can set up the menu options from the

system menu and initial menu. For details

LANGUAGE (multi-language)

1 (list)

about the settings, refer to System menu on

This unit can display the text information from a

page 7 and Initial menu on page 7.

2 Sub information section

compressed audio file even for information em-

! You can cancel set up menu by pressing

3 TA (traffic announcements)

bedded in English, Russian or Turkish.

SRC/OFF.

! If the embedded language and the selected

4 TP (traffic program identification)

language setting are not the same, text infor-

5

(sound retriever)

mation may not display properly.

Basic operations

! Some characters may not be displayed prop-

6 LOC (local seek tuning)

Important

erly.

! Handle the front panel with care when re-

7

(repeat)

1 Turn M.C. to select the desired setting.

moving or attaching it.

ENG (English)—РУС (Russian)—TUR (Turk-

8

(random)

! Avoid subjecting the front panel to excessive

ish)

shock.

Main information section

2 Press M.C. to confirm the selection.

! Keep the front panel out of direct sunlight

! Tuner: band and frequency

CLOCK SET (setting the clock)

and high temperatures.

! RDS: program service name, PTY infor-

! To avoid damaging the device or vehicle inte-

9

mation and other literal information

1 Turn M.C. to adjust hour.

rior, remove any cables and devices attached

! CD player and USB storage device:

2 Press M.C. to select minute.

to the front panel before detaching it.

elapsed playback time and text informa-

3 Turn M.C. to adjust minute.

tion

4 Press M.C. to confirm the selection.

FM STEP (FM tuning step)

a

Appears when a lower tier of folder or menu

exists.

Use FM STEP to set FM tuning step options (seek

step settings).

1 Turn M.C. to select the FM tuning step.

100 (100 kHz)—50 (50 kHz)

Set up menu

2 Press M.C. to confirm the selection.

1 After installation of this unit, turn the

QUIT appears.

ignition switch to ON.

! The manual tuning step is fixed at 50 kHz.

SET UP appears.

! When AF and TA are turned off, the seek step

is fixed at 50 kHz even if set to 100.

2 Turn M.C. to switch to YES.

# If you do not use the unit for 30 seconds, the set

up menu will not be displayed.

En

3

<QRD3204-A>3

Black plate (4,1)

Section

02

Using this unit

Using this unit

Note

Notes

Removing the front panel

Manual tuning (step by step)

When this unit’s blue/white lead is connected to

! If the program service name cannot be ac-

1 Press the detach button to release the front

1 Press c or d.

the vehicle’s auto-antenna relay control termi-

quired in FREQUENCY, the broadcast fre-

panel.

! Select MAN (manual tuning) under SEEK to

nal, the vehicle’s antenna extends when this

quency is displayed instead. If the program

2 Push the front panel upward (M) and then pull

use this function.

unit’s source is turned on. To retract the anten-

service name is detected, the program serv-

it toward (N) you.

na, turn the source off.

Seeking

ice name will be displayed.

1 Press and hold c or d, and then release.

! Depending on the band, text information can

You can cancel seek tuning by briefly pressing

be changed.

Frequently used menu

c or d.

! Text information items that can be changed

operations

While pressing and holding c or d, you can

depend on the area.

skip stations. Seek tuning starts as soon as

you release c or d.

Returning to the previous display

3 Always store the detached front panel in a pro—

Using PTY functions

Returning to the previous list (the folder one level

tective case or bag.

Notes

You can tune in to a station using PTY (program

higher)

! For details about SEEK, refer to SEEK (left/

type) information.

Re-attaching the front panel

1 Press

/DIMMER.

right key setting) on page 5.

1 Slide the front panel to the left.

Returning to the ordinary display

! This unit’s AF (alternative frequencies

Searching for an RDS station by PTY information

Canceling the main menu

search) function can be turned on and off.

1 Press

(list).

1 Press BAND.

AF should be off for normal tuning operation

2 Turn M.C. to select a program type.

(refer to AF (alternative frequencies search)

NEWS/INFO—POPULAR—CLASSICS—

Returning to the ordinary display from the list

on page 5).

OTHERS

1 Press BAND.

3 Press M.C. to begin the search.

Storing and recalling stations

The unit searches for a station broadcasting

that type of program. When a station is found,

2 Press the right side of the front panel until it is

for each band

Radio

its program service name is displayed.

firmly seated.

! To cancel the search, press M.C. again.

Forcing the front panel into place may result in

Using preset tuning buttons

Basic operations

! The program of some stations may differ

damage to the front panel or head unit.

1 To store: Press and hold down one of the

from that indicated by the transmitted PTY.

Turning the unit on

preset tuning buttons (1/

to 6/ ) until

Selecting a band

! If no station is broadcasting the type of

1 Press SRC/OFF to turn the unit on.

the number stops flashing.

1 Press BAND until the desired band (FM1,

program you searched for, NOT FOUND is

FM2, FM3 for FM or MW/LW) is displayed.

displayed for about two seconds and then

Turning the unit off

2 To recall: Press one of the preset tuning

the tuner returns to the original station.

1 Press and hold SRC/OFF until the unit turns

Switching preset stations

buttons (1/

to 6/ ).

off.

1 Press c or d.

! Select PCH (preset channel) under SEEK to

Selecting a source

Switching the display

PTY list

use this function.

1 Press SRC/OFF to cycle between:

For more details about PTY list, visit the follow-

RADIO—CD—USB—AUX

Selecting the desired text information

ing site:

! USB MTP displays while the MTP connection

1 Press DISP to cycle between the following:

http://www.pioneer.eu/eur/products/25/121/tech/

is in use.

! FREQUENCY (program service name or

CarAudio/PTY.html

frequency)

Adjusting the volume

! BRDCST INFO (program service name/PTY

1 Turn M.C. to adjust the volume.

Function settings

information)

! CLOCK (source name and clock)

1 Press M.C. to display the main menu.

4

En

<QRD3204-A>4

Black plate (5,1)

Section

Using this unit

Using this unit

02

2 Turn M.C. to change the menu option

Note

Note

Local seek tuning allows you to tune in to only

and press to select FUNCTION.

English

This function is not compatible with WAV.

Disconnect USB storage devices from the unit

those radio stations with sufficiently strong sig-

when not in use.

nals for good reception.

3 Turn M.C. to select the function.

Basic operations

1 Press M.C. to select the desired setting.

Once selected, the following functions can be

Switching the display

FM: OFF—LV1—LV2—LV3—LV 4

adjusted.

MW/LW: OFF—LV1 —LV2

Playing a CD/CD-R/CD-RW

# If MW/LW band is selected, only BSM, LOCAL

The highest level setting allows reception of

1 Insert the disc into the disc loading slot with

Selecting the desired text information

and SEEK are available.

only the strongest stations, while lower levels

the label side up.

1 Press DISP to cycle between the following:

allow the reception of weaker stations.

CD-DA

FM SETTING (FM sound quality settings)

Ejecting a CD/CD-R/CD-RW

! ELAPSED TIME (track number and play-

TA (traffic announcement standby)

1 Press h.

The sound quality level can be set to match the

back time)

broadcast signal conditions of the FM band sig-

Playing songs on a USB storage device

! CLOCK (source name and clock)

1 Press M.C. to turn traffic announcement

nal.

1 Open the USB port cover.

! SPEANA (spectrum analyzer)

standby on or off.

1 Press M.C. to display the setting mode.

2 Plug in the USB storage device using a USB

CD-TEXT

2 Turn M.C. to select the desired setting.

AF (alternative frequencies search)

cable.

! TRACK INFO (track title/track artist/disc

! STANDARD – This is the standard setting.

title)

Stopping playback of files on a USB storage de-

1 Press M.C. to turn AF on or off.

! HI-FI – This is the setting to use to prioritize

! ELAPSED TIME (track number and play-

vice

the high quality of stereo sound.

back time)

NEWS (news program interruption)

1 You may disconnect the USB storage device at

! STABLE – This is the setting to use to priori-

! CLOCK (source name and clock)

any time.

tize the low noise of monaural sound.

! SPEANA (spectrum analyzer)

1 Press M.C. to turn the NEWS function on or

Selecting a folder

MP3/WMA/WAV

off.

BSM (best stations memory)

1 Press 1/

or 2/ .

! TRACK INFO (track title/artist name/album

SEEK (left/right key setting)

BSM (best stations memory) automatically stores

title)

Selecting a track

the six strongest stations in the order of their sig-

! FILE INFO (file name/folder name)

You can assign a function to the left and right keys

1 Press c or d.

nal strength.

! ELAPSED TIME (track number and play-

of the unit.

1 Press M.C. to turn BSM on.

Fast forwarding or reversing

back time)

Select MAN (manual tuning) to tune up or down

To cancel, press M.C. again.

1 Press and hold c or d.

! CLOCK (source name and clock)

manually or select PCH (preset channel) to switch

! When playing compressed audio, there is no

! SPEANA (spectrum analyzer)

between preset channels.

REGIONAL (regional)

sound during fast forward or reverse.

1 Press M.C. to select MAN or PCH.

When AF is used, the regional function limits the

Returning to root folder

Selecting and playing files/

selection of stations to those broadcasting region-

1 Press and hold BAND.

tracks from the name list

al programs.

CD/CD-R/CD-RW and USB

1 Press M.C. to turn the regional function on or

Switching between compressed audio and CD-DA

1 Press to switch to the file/track name

off.

storage devices

1 Press BAND.

list mode.

LOCAL (local seek tuning)

Switching between playback memory devices

MTP connection

You can switch between playback memory devices

2 Use M.C. to select the desired file name

MTP-compatible Android devices (running

on USB storage devices with more than one Mass

(or folder name).

Android OS 4.0 or higher) can be connected by

Storage Device-compatible memory device.

MTP connection using the USB source. To con-

1 Press BAND.

Selecting a file or folder

nect an Android device, use the cable that came

! You can switch between up to 32 different

1 Turn M.C.

with the device.

memory devices.

Playing

1 When a file or track is selected, press M.C.

En

5

<QRD3204-A>5

Black plate (6,1)

Section

02

Using this unit

Using this unit

2 Turn M.C. to change the menu option

Viewing a list of the files (or folders) in the se-

FADER (fader adjustment)

Loudness compensates for deficiencies in the low-

and press to select FUNCTION.

lected folder

frequency and high-frequency ranges at low vol-

Once selected, the function below can be ad-

1 When a folder is selected, press M.C.

1 Press M.C. to display the setting mode.

ume.

justed.

2 Turn M.C. to adjust the front/rear speaker bal-

1 Press M.C. to select the desired setting.

Playing a song in the selected folder

ance.

OFF (off)—LOW (low)—MID (mid)—HI (high)

1 When a folder is selected, press and hold M.C.

S.RTRV (sound retriever)

BALANCE (balance adjustment)

SUB.W (subwoofer on/off setting)

Automatically enhances compressed audio and

Operations using special buttons

restores rich sound.

This unit is equipped with a subwoofer output

1 Press M.C. to display the setting mode.

1 Press M.C. to select the desired setting.

which can be turned on or off.

2 Turn M.C. to adjust the left/right speaker bal-

Selecting a repeat play range

For details, refer to Enhancing compressed

1 Press M.C. to select the desired setting.

ance.

NOR (normal phase)—REV (reverse phase)—

1 Press 6/

to cycle between the following:

audio and restoring rich sound (sound retriever)

EQ SETTING (equalizer recall)

OFF (subwoofer off)

CD/CD-R/CD-RW

on page 6.

! ALL – Repeat all tracks

1 Press M.C. to display the setting mode.

SUB.W CTRL (subwoofer adjustment)

! ONE – Repeat the current track

2 Turn M.C. to select the equalizer.

Only frequencies lower than those in the selected

! FLD – Repeat the current folder

Audio adjustments

POWERFUL—NATURAL—VOCAL—CUS-

range are outputted from the subwoofer.

USB storage device

TOM1—CUSTOM2—FLAT—SUPER BASS

1 Press M.C. to display the main menu.

1 Press M.C. to display the setting mode.

! ALL – Repeat all files

The equalizer band and equalizer level can be

2 Press M.C. to cycle between the following:

! ONE – Repeat the current file

customized when CUSTOM1 or CUSTOM2 is

2 Turn M.C. to change the menu option

Cut-off frequency—Output level—Slope level

! FLD – Repeat the current folder

selected.

and press to select AUDIO.

Rates that can be adjusted will flash.

Playing tracks in random order

If selecting CUSTOM1 or CUSTOM2, complete

3 Turn M.C. to select the desired setting.

1 Press 5/

to turn random play on or off.

the procedures outlined below. If selecting

3 Turn M.C. to select the audio function.

Cut-off frequency: 50HZ—63HZ—80HZ—

Tracks in a selected repeat range are played in

other options, press M.C. to return to the pre-

Once selected, the following audio functions

100HZ—125HZ—160HZ—200HZ

random order.

vious display.

can be adjusted.

Output level: –24 to +6

! To change songs during random play, press d

! CUSTOM1 can be set separately for each

! FADER is not available when SUB.W/SUB.W

Slope level: –12— –24

to switch to the next track. Pressing c restarts

source.

is selected in SP-P/O MODE. For details, refer

BASS BOOST (bass boost)

playback of the current track from the begin-

! CUSTOM2 is a shared setting used in com-

to SP-P/O MODE (rear output and preout set-

ning of the song.

mon for all sources.

ting) on page 7.

1 Press M.C. to display the setting mode.

3 Press M.C. to display the setting mode.

! SUB.W and SUB.W CTRL are not available

Pausing playback

2 Turn M.C. to select a desired level.

4 Press M.C. to cycle between the following:

when REAR/REAR is selected in

1 Press 4/PAUSE to pause or resume.

0 to +6 is displayed as the level is increased or

Equalizer band—Equalizer level

SP-P/O MODE. For details, refer to

decreased.

Enhancing compressed audio and restoring rich

5 Turn M.C. to select the desired setting.

SP-P/O MODE (rear output and preout set-

sound (sound retriever)

Equalizer band: 80HZ—250HZ—800HZ—

ting) on page 7.

HPF SETTING (high pass filter adjustment)

1 Press 3/S.Rtrv to cycle between:

2.5KHZ—8KHZ

! SUB.W CTRL is not available when SUB.W is

1—2—OFF (off)

Equalizer level: +6 to –6

selected in OFF. For details, refer to SUB.W

1 is effective for low compression rates, and 2

! You can also switch the equalizer by pressing

(subwoofer on/off setting) on page 6.

is effective for high compression rates.

EQ repeatedly.

! SLA is not available when FM is selected as

the source.

LOUDNESS (loudness)

Function settings

1 Press M.C. to display the main menu.

6

En

<QRD3204-A>6

Black plate (7,1)

Section

Using this unit

Using this unit

02

3 Turn M.C. to select the system menu

Use this function when wanting to listen only to

Sound from this system is automatically muted or

SP-P/O MODE (rear output and preout setting)

function.

English

high-frequency sounds. Only frequencies higher

attenuated when a signal from equipment with a

Once selected, the following system menu func-

The rear speaker leads output and the RCA output

than the high-pass filter (HPF) cutoff are output

mute function is received.

tions can be adjusted.

of this unit can be used to connect a full-range

from the speakers.

1 Press M.C. to display the setting mode.

! MUTE MODE and PW SAVE are not available

speaker or subwoofer. Select a suitable option for

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

for DEH-1600UBA.

your connection.

2 Press M.C. to cycle between the following:

! MUTE – Muting

1 Press M.C. to display the setting mode.

Cut-off frequency—Slope level

! 20dB ATT – Attenuation (20dB ATT has a

LANGUAGE (multi-language)

2 Turn M.C. to select the desired setting.

3 Turn M.C. to select the desired setting.

stronger effect than 10dB ATT)

! REAR/SUB.W – Select when there is a full-

Cut-off frequency: OFF—50HZ—63HZ—80HZ

! 10dB ATT – Attenuation

1 Press M.C. to select the desired setting.

range speaker connected to the rear speak-

—100HZ—125HZ—160HZ—200HZ

ENG (English)—РУС (Russian)—TUR (Turk-

PW SAVE (power saving)

er leads output and there is a subwoofer

Slope level: –12— –24

ish)

connected to the RCA output.

Switching this function on enables you to reduce

SLA (source level adjustment)

! SUB.W/SUB.W – Select when there is a

CLOCK SET (setting the clock)

the consumption of battery power.

subwoofer connected directly to the rear

This function prevents the volume from changing

! Turning on the source is the only operation al-

speaker leads output without any auxiliary

too dramatically when the source switches.

1 Press M.C. to display the setting mode.

lowed when this function is on.

amp and there is a subwoofer connected

! Settings are based on the FM volume level,

2 Press M.C. to select the segment of the clock

1 Press M.C. to turn the power save on or off.

to the RCA output.

which remains unchanged.

display you wish to set.

! REAR/REAR – Select when there is a full-

! The MW/LW volume level can also be adjusted

Hour—Minute

range speaker connected to the rear speak-

with this function.

3 Turn M.C. to adjust the clock.

Initial menu

er leads output and the RCA output.

1 Press M.C. to display the setting mode.

12H/24H (time notation)

If there is a full-range speaker connected to

2 Turn M.C. to adjust the source volume.

1 Press and hold SRC/OFF until the unit

the rear speaker leads output and the RCA

Adjustment range: +4 to –4

turns off.

1 Press M.C. to select the desired setting.

output is not used, you may select either

12H (12-hour clock)—24H (24-hour clock)

REAR/SUB.W or REAR/REAR.

2 Press and hold SRC/OFF until the main

AUTO PI (auto PI seek)

menu appears in the display.

System menu

Only for DEH-1600UBA

The unit can automatically search for a different

Important

Press M.C. to display the main menu.

System menu

station with the same programming, even during

PW SAVE (power saving) is canceled if the ve-

preset recall.

1 Press and hold SRC/OFF until the unit

hicle battery is disconnected and will need to be

3 Turn M.C. to change the menu option

1 Press M.C. to turn Auto PI seek on or off.

turns off.

turned back on once the battery is reconnected.

and press to select INITIAL.

When PW SAVE (power saving) is off, depend-

AUX (auxiliary input)

2 Press and hold SRC/OFF until the main

ing on connection methods, the unit may con-

4 Turn M.C. to select the initial menu func-

Activate this setting when using an auxiliar y de-

menu appears in the display.

tinue to draw power from the battery if your

tion.

vice connected to this unit.

Only for DEH-1600UBA

vehicle’s ignition doesn’t have an ACC (acces-

Once selected, the following initial menu func-

1 Press M.C. to turn AUX on or off.

Press M.C. to display the main menu.

sory) position.

tions can be adjusted.

DIMMER (dimmer)

3 Turn M.C. to change the menu option

1 Press M.C. to display the main menu.

FM STEP (FM tuning step)

and press to select SYSTEM.

1 Press M.C. to turn the dimmer on or off.

! You can also change the dimmer setting by

2 Turn M.C. to change the menu option

1 Press M.C. to select the FM tuning step.

4 Turn M.C. to select the system menu

pressing and holding

/DIMMER.

and press to select SYSTEM.

100 (100 kHz)—50 (50 kHz)

function.

MUTE MODE (mute mode)

For details, refer to System menu on page 7.

En

7

<QRD3204-A>7

Black plate (8,1)

— Never wire the negative speaker cable directly

Using an AUX source

Connections

to ground.

1 Insert the stereo mini plug into the AUX

Important

— Never band together negative cables of multi-

input jack.

! When installing this unit in a vehicle without

ple speakers.

an ACC (accessory) position on the ignition

! When this unit is on, control signals are sent

2 Press SRC/OFF to select AUX as the

switch, failure to connect the red cable to the

through the blue/white cable. Connect this

source.

terminal that detects operation of the ignition

cable to the system remote control of an ex-

key may result in battery drain.

ternal power amp or the vehicle’s auto-anten-

Note

na relay control terminal (max. 300 mA

AUX cannot be selected unless the auxiliary set-

F

F

O

N

12 V DC). If the vehicle is equipped with a

ting is turned on. For more details, refer to AUX

O

T

S

glass antenna, connect it to the antenna

T

R

A

(auxiliary input) on page 7.

booster power supply terminal.

! Never connect the blue/white cable to the

ACC position No ACC position

Switching the display

power terminal of an external power amp.

! Use of this unit in conditions other than the

Also, never connect it to the power terminal

Selecting the desired text information

following could result in fire or malfunction.

of the auto antenna. Doing so may result in

1 Press DISP to cycle between the following:

— Vehicles with a 12-volt battery and negative

battery drain or a malfunction.

! Source name

grounding.

! The black cable is ground. Ground cables for

! Source name and clock

— Speakers with 50 W (output value) and 4 W to

this unit and other equipment (especially,

8 W (impedance value).

high-current products such as power amps)

! To prevent a short-circuit, overheating or mal-

must be wired separately. If they are not, an

function, be sure to follow the directions

accidental detachment may result in a fire or

If an unwanted display appears

below.

malfunction.

Turn off the unwanted display using the proce-

— Disconnect the negative terminal of the bat-

dures listed below.

tery before installation.

This unit

— Secure the wiring with cable clamps or adhe-

1 Press M.C. to display the main menu.

sive tape. Wrap adhesive tape around wiring

that comes into contact with metal parts to

2 Turn M.C. to change the menu option

protect the wiring.

and press to select SYSTEM.

— Place all cables away from moving parts,

such as the shift lever and seat rails.

3 Turn M.C. to display DEMO OFF and press

— Place all cables away from hot places, such

to select.

as near the heater outlet.

— Do not connect the yellow cable to the battery

4 Turn M.C. to switch to YES.

by passing it through the hole to the engine

compartment.

5 Press M.C. to select.

— Cover any disconnected cable connectors

with insulating tape.

— Do not shorten any cables.

— Never cut the insulation of the power cable of

this unit in order to share the power with

other devices. The current capacity of the

cable is limited.

— Use a fuse of the rating prescribed.

3 45

Section

02

Using this unit

Installation

03

21

1 Power cord input

2 Rear output or subwoofer output

3 Antenna input

4 Fuse (10 A)

5 Wired remote input (DEH-1600UB, DEH-

1600UBG and DEH-1600UBB only)

Hard-wired remote control adapter can be

connected (sold separately).

8

En

<QRD3204-A>8

Black plate (9,1)

Power cord

3

4

1

2

5

6

3

4

7

5

6

8

a

9

b

e

d

9 Blue/white

Power amp (sold separately)

! When installing, to ensure proper heat dis-

The pin position of the ISO connector will dif-

persal when using this unit, make sure you

Perform these connections when using the op-

fer depending on the type of vehicle. Connect

leave ample space behind the rear panel and

tional amplifier.

9 and b when Pin 5 is an antenna control

wrap any loose cables so they are not block-

type. In another type of vehicle, never con-

3

ing the vents.

1

nect 9 and b.

2

a Blue/white

4





Connect to system control terminal of the

55





power amp (max. 300 mA 12 V DC).

b Blue/white

1 System remote control

Connect to auto-antenna relay control termi-

Connect to Blue/white cable.

nal (max. 300 mA 12 V DC).

2 Power amp (sold separately)

c Yellow/black (DEH-1600UB, DEH-1600UBG

3 Connect with RCA cables (sold separately)

and DEH-1600UBB only)

4 To Rear output or subwoofer output

If you use an equipment with Mute function,

5 Rear speaker or subwoofer

wire this lead to the Audio Mute lead on that

equipment. If not, keep the Audio Mute lead

free of any connections.

c

Installation

d Speaker leads

Important

White: Front left +

White/black: Front left *

! Check all connections and systems before

1 To power cord input

Gray: Front right +

final installation.

2 Depending on the kind of vehicle, the func-

Gray/black: Front right *

! Do not use unauthorized parts as this may

tion of 3 and 5 may be different. In this

Green: Rear left + or subwoofer +

cause malfunctions.

case, be sure to connect 4 to 5 and 6 to

Green/black: Rear left * or subwoofer *

! Consult your dealer if installation requires

3.

Violet: Rear right + or subwoofer +

drilling of holes or other modifications to the

3 Yellow

Violet/black: Rear right * or subwoofer *

vehicle.

Back-up (or accessory)

e ISO connector

! Do not install this unit where:

4 Yellow

In some vehicles, the ISO connector may be

— it may interfere with operation of the vehicle.

Connect to the constant 12 V supply termi-

divided into two. In this case, be sure to con-

— it may cause injury to a passenger as a result

nal.

nect to both connectors.

of a sudden stop.

5 Red

! The semiconductor laser will be damaged if

Notes

Accessory (or back-up)

it overheats. Install this unit away from hot

! Change the initial menu of this unit. Refer to

6 Red

places such as near the heater outlet.

SP-P/O MODE (rear output and preout set-

Connect to terminal controlled by ignition

! Optimum performance is obtained when the

ting) on page 7.

switch (12 V DC).

unit is installed at an angle of less than 60°.

The subwoofer output of this unit is monau-

7 Connect leads of the same color to each

ral.

other.

60°

! When using a subwoofer of 70 W (2 W), be

8 Black (chassis ground)

sure to connect the subwoofer to the violet

and violet/black leads of this unit. Do not

connect anything to the green and green/

black leads.

5cmcm

Section

Installation

Installation

03

English

Leave ample

5 cm

space

5 cm

DIN front/rear mount

This unit can be properly installed using either

front-mount or rear-mount installation.

Use commercially available parts when instal-

ling.

DIN Front-mount

1 Insert the mounting sleeve into the dash-

board.

For installation in shallow spaces, use the sup-

plied mounting sleeve. If there is enough space,

use the mounting sleeve that came with the ve-

hicle.

2 Secure the mounting sleeve by using a

screwdriver to bend the metal tabs (90°) into

place.

1

2

1 Dashboard

En

9

<QRD3204-A>9

Black plate (10,1)

Section

03

Installation

Additional information

2 Mounting sleeve

! When reattaching the trim ring, point the

Symptoms are written in bold and causes in reg-

Troubleshooting

# Make sure that the unit is installed securely in

side with the notched tab down.

ular, non-indented text. Regular, indented text is

place. An unstable installation may cause skipping

Symptoms are written in bold and causes in reg-

used to indicate actions to be taken.

or other malfunctions.

2 Insert the supplied extraction keys into

ular, non-indented text. Regular, indented text is

both sides of the unit until they click into

used to indicate actions to be taken.

Common

place.

DIN Rear-mount

AMP ERROR

The display automatically returns to the ordinary

1 Determine the appropriate position

3 Pull the unit out of the dashboard.

display.

This unit fails to operate or the speaker connection is

where the holes on the bracket and the side

incorrect; the protective circuit is activated.

of the unit match.

You did not perform any operation within about 30

Check the speaker connection. If the message

seconds.

fails to disappear even after the engine is

Perform operation again.

switched off/on, contact your dealer or an

authorized Pioneer Service Station for

The repeat play range changes unexpectedly.

assistance.

Depending on the repeat play range, the selected

range may change when another folder or track is

2 Tighten two screws on each side.

Removing and re-attaching the front

being selected or during fast forwarding/reversing.

CD player

panel

Select the repeat play range again.

You can remove the front panel to protect your

ERROR-07, 11, 12, 17, 30

3

1

unit from theft.

A subfolder is not played back.

The disc is dirty.

For details, refer to Removing the front panel and

Subfolders cannot be played when FLD (folder re-

Clean the disc.

Re-attaching the front panel on page 4.

peat) is selected.

2

The disc is scratched.

Select another repeat play range.

Replace the disc.

1 Tapping screw (5 mm × 8 mm)

NO XXXX appears when a display is changed

2 Mounting bracket

ERROR-07, 10, 11, 12, 15, 17, 30, A0

(NO TITLE, for example).

3 Dashboard or console

There is an electrical or mechanical error.

There is no embedded text information.

Turn the ignition switch OFF and back ON, or

Switch the display or play another track/file.

switch to a different source, then back to the CD

Removing the unit

player.

1 Remove the trim ring.

The unit is malfunctioning.

There is interference.

ERROR-15

You are using a device, such as a cellular phone,

The inserted disc is blank.

that may cause audible interference.

Replace the disc.

Move electrical devices that may be causing the

interference away from the unit.

ERROR-23

Unsupported CD format.

Replace the disc.

1 Trim ring

Error messages

2 Notched tab

When you contact your dealer or your nearest

! Releasing the front panel allows easier ac-

Pioneer Service Center, be sure to note the error

cess to the trim ring.

message.

10

En

<QRD3204-A>10

Black plate (11,1)

Appendix

Additional information

Additional information

FORMAT READ

PROTECT

STOP

Condensation may temporarily impair the player’s

English

Sometimes there is a delay between the start of play-

All the files on the connected USB storage device

There are no songs in the current list.

performance. Let it rest for about one hour to ad-

back and when you start to hear any sound.

are embedded with DRM.

Select a list that contains songs.

just to a warmer temperature. Also, wipe any

Wait until the message disappears and you hear

Replace the USB storage device.

damp discs off with a soft cloth.

sound.

Playback of discs may not be possible because of

N/A USB

Handling guidelines

disc characteristics, disc format, recorded applica-

NO AUDIO

The connected USB device is not supported by this

tion, playback environment, storage conditions,

Discs and player

The inserted disc does not contain any playable files.

unit.

and so on.

Replace the disc.

! Connect a USB Mass Storage Class compliant

Use only discs that feature either of the following

device.

Road shocks may interrupt disc playback.

two logos.

SKIPPED

! Disconnect your device and replace it with a

When using discs that can be printed on label sur-

compatible USB storage device.

The inserted disc contains DRM protected files.

faces, check the instructions and the warnings of

The protected files are skipped.

the discs. Depending on the discs, inserting and

CHECK USB

ejecting may not be possible. Using such discs

PROTECT

The USB connector or USB cable has short-

may result in damage to this equipment.

circuited.

All the files on the inserted disc are embedded with

Do not attach commercially available labels or

Check that the USB connector or USB cable is

DRM.

other materials to the discs.

not caught in something or damaged.

Replace the disc.

! The discs may warp making the disc unplay-

The connected USB storage device consumes more

Use 12-cm discs.

able.

than maximum allowable current.

Use only conventional, fully circular discs.

! The labels may come off during playback and

Disconnect the USB storage device and do not

USB storage device

prevent ejection of the discs, which may result

use it. Turn the ignition switch to OFF, then to

The following types of discs cannot be used with

in damage to the equipment.

FORMAT READ

ACC or ON and then connect only compliant

this unit:

USB storage devices.

! DualDiscs

Sometimes there is a delay between the start of play-

! 8-cm discs: Attempts to use such discs with

USB storage device

back and when you start to hear any sound.

Wait until the message disappears and you hear

ERROR-19

an adaptor may cause the unit to malfunction.

! Oddly shaped discs

sound.

Connections via USB hub are not supported.

Communication failed.

Perform one of the following operations.

Do not connect anything other than a USB stor-

NO AUDIO

–Turn the ignition switch OFF and back ON.

age device.

–Disconnect the USB storage device.

There are no songs.

! Discs other than CDs

Firmly secure the USB storage device when driv-

–Change to a different source.

Transfer the audio files to the USB storage device

! Damaged discs, including discs that are

ing. Do not let the USB storage device fall onto the

Then, return to the USB source.

and connect.

cracked, chipped or warped

floor, where it may become jammed under the

! CD-R/RW discs that have not been finalized

The connected USB storage device has security en-

brake or accelerator pedal.

ERROR-23

abled.

Do not touch the recorded surface of the discs.

USB storage device was not formatted with FAT12,

Depending on the USB storage device, the follow-

Follow the USB storage device instructions to

Store discs in their cases when not in use.

ing problems may occur.

disable the security.

FAT16 or FAT32.

USB storage device should be formatted with

! Operations may vary.

Do not attach labels, write on or apply chemicals

FAT12, FAT16 or FAT32.

! The storage device may not be recognized.

SKIPPED

to the surface of the discs.

! Files may not be played back properly.

The connected USB storage device contains DRM

To clean a CD, wipe the disc with a soft cloth out-

! The device may cause audible interference

protected files.

ward from the center.

when you are listening to the radio.

The protected files are skipped.

En

11

<QRD3204-A>11

Black plate (12,1)

Appendix

Additional information

Additional information

Compressed audio

Supplemental information

USB storage device

Playable files: up to 15 000

Playback sequence is the same as recorded se-

compatibility (disc, USB)

Only the first 32 characters can be displayed as a

Playback of copyright-protected files: Not compati-

quence in the USB storage device.

file name (including the file extension) or a folder

ble

WMA

To specify the playback sequence, the following

name.

Partitioned USB storage device: Only the first par-

method is recommended.

File extension: .wma

1 Create a file name that includes numbers

Russian text to be displayed on this unit should be

tition can be played.

that specify the playback sequence (e.g.,

Bit rate: 48 kbps to 320 kbps (CBR), 48 kbps to

encoded in one of the following character sets:

There may be a slight delay when starting play-

001xxx.mp3 and 099yyy.mp3).

384 kbps (VBR)

! Unicode (UTF-8, UTF-16)

back of audio files on a USB storage device with

2 Put those files into a folder.

! A character set other than Unicode that is

numerous folder hierarchies.

Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz

3 Save the folder containing files on the USB

used in a Windows environment and is set to

storage device.

Windows Mediaä Audio Professional, Lossless,

Russian in the multi-language setting

However, depending on the system environment,

Voice/DRM Stream/Stream with video: Not com-

This unit may not work properly depending on the

CAUTION

you may not be able to specify the playback se-

patible

application used to encode WMA files.

! Pioneer cannot guarantee compatibility with

quence.

all USB mass storage devices and assumes

For USB portable audio players, the sequence is

There may be a slight delay at the start of playback

no responsibility for any loss of data on

different and depends on the player.

MP3

of audio files embedded with image data or audio

media players, smart phones, or other devi-

files stored on a USB storage device that has nu-

ces while using this product.

File extension: .mp3

merous folder hierarchies.

Russian character chart

! Do not leave discs or a USB storage device

Bit rate: 8 kbps to 320 kbps (CBR), VBR

in any place that is subject to high tempera-

D: C D: C D: C D: C D: C

Sampling frequency: 8 kHz to 48 kHz (32 kHz,

Disc

tures.

44.1 kHz, 48 kHz for emphasis)

: А : Б : В : Г : Д

Playable folder hierarchy: up to eight tiers (A prac-

Compatible ID3 tag version: 1.0, 1.1, 2.2, 2.3, 2.4

Sequence of audio files

: Е, Ё : Ж : З : И, Й : К

tical hierarchy is less than two tiers.)

(ID3 tag Version 2.x is given priority over Version

The user cannot assign folder numbers and

: Л : М : Н : О : П

1.x.)

Playable folders: up to 99

specify playback sequences with this unit.

: Р : С : Т : У : Ф

M3u playlist: Not compatible

Playable files: up to 999

Example of a hierarchy

: Ш,

MP3i (MP3 interactive), mp3 PRO: Not compatible

File system: ISO 9660 Level 1 and 2, Romeo, Joliet

: Х : Ц : Ч

: Ъ

01

Щ

Multi-session playback: Compatible

02



: Ы : Ь : Э : Ю : Я

WAV

Packet write data transfer: Not compatible



: Folder

03

D: Display C: Character

Regardless of the length of blank sections be-

: Compressed

File extension: .wav



tween the songs from the original recording, com-

04



audio file

Quantization bits: 8 and 16 (LPCM), 4 (MS

pressed audio discs play with a short pause



01 to 05: Folder



Copyright and trademark

ADPCM)

between songs.

number

05

1 to 6: Playback

Sampling frequency: 16 kHz to 48 kHz (LPCM),

MP3

Level 1 Level 2 Level 3 Level 4

sequence

22.05 kHz and 44.1 kHz (MS ADPCM)

Supply of this product only conveys a license for

USB storage device

private, non-commercial use and does not con-

Disc

vey a license nor imply any right to use this prod-

! You cannot use this function with USB MTP.

Playable folder hierarchy: up to eight tiers (A prac-

Folder selection sequence or other operation

uct in any commercial (i.e. revenue-generating)

tical hierarchy is less than two tiers.)

may differ depending on the encoding or writing

real time broadcasting (terrestrial, satellite,

Playable folders: up to 500

software.

cable and/or any other media), broadcasting/

12

En

<QRD3204-A>12