Pioneer vsp 200 инструкция по применению

You can only view or download manuals with

Sign Up and get 5 for free

Upload your files to the site. You get 1 for each file you add

Get 1 for every time someone downloads your manual

Buy as many  as you need

Detailed instructions for use are in the User’s Guide.

[. . . ] To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Location: rear of the unit

CLASS 1 LASER PRODUCT
D3-4-2-1-8_A_En

WARNING
This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filed with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain D3-4-2-1-3_A_En or moisture.

On the bonnet of the unit:

Recording equipment and copyright: Recording equipment should be used only for lawful copying and you are advised to check carefully what is lawful copying in the country in which you are making a copy. Copying of copyright material such as films or music is unlawful unless permitted by a legal exception or consented to by the rightowners.
K018_En

This product complies with the Low Voltage Directive (73/23/EEC, amended by 93/68/EEC), EMC Directives (89/336/EEC, amended by 92/31/EEC and D3-4-2-1-9a_En 93/68/EEC).

WARNING
Before plugging in for the first time, read the following section carefully. [. . . ] · You can’t make ASES tape recordings of Video CD/Super VCDs or DVD-Video discs.

Improving AM tape recordings
· Default setting: B. CUT 1 Recording AM broadcasts on cassette tape can result in noisy recordings. If you want to record the tracks in a different order, or record only one track, use the program play feature—see page 37 for how to make a program list. The ASES indicator lights, followed by a 4 second pause while the tape winds past the leader, then recording starts. Recording finishes automatically when the end of the disc is reached, or the tape ends (whichever comes first).

3 Use the / (cursor left/right) buttons to select BEAT CUT. B. CUT lights in the display when B. CUT 2 is selected.

.

.

50
En

Using the tape deck

08

Reducing the source signal level
· Default setting: ATT 6DB Some auxiliary sources may produce a high signal level which may produce unpleasant distortion if recorded on the built-in tape recorder. In such cases, you may need to reduce the signal level of the line source by switching on the attenuator. Press ENTER.

3 Use the / (cursor left/right) buttons to select the attenuation (LINE ATT) display. The current setting is shown in the display.

.

5 Use the / (cursor up/down) buttons to select a setting. · ATT 6DB ­ Lowers source signal by 6dB · ATT 10DB ­ Lowers source signal by 10dB (EV66/99DVD model only) · ATT OFF ­ Switches attenuation off 6 Press ENTER to confirm.

51
En

09

Viewing JPEG discs

Chapter 9

Viewing JPEG discs
Playing a JPEG slideshow
After loading a CD/CD-R/RW containing JPEG pictures, press to start a slideshow from the first folder/picture on the disc. The player displays the pictures in each folder in alphabetical order. Pictures are automatically adjusted so that they fill as much of the screen as possible (if the aspect ratio of the picture is different to your TV screen you may notice black bars at the sides, or at the top and bottom of the screen). You can also use the radio or a component connected to the auxiliary inputs as source material for a backing track. · If you want to play from a track other than the first, select the track now. Pressing repeatedly switches between these options: · KARAOKE (Vocal cancel) ­ Vocals in the backing track are partially eliminated using EQ. · L+R CH ­ Use to put a single-channel vocal track into the center of the mix. For the EV66/99DVD model only · Multichannel sources are downmixed to stereo when KARAOKE is selected. 5 Play the backing track.

MIC VOL

MIN

MAX

MAIN

MIC

SUB

1 Set the MIC VOL knob (front panel) to minimum. · If the microphone has an on/off switch, make sure it’s on. · If you’re only using one mic, plug it into the MIC (MAIN) jack. The MIC (SUB) jack can be used only if MIC (MAIN) is also connected.

6 Adjust the MIC VOL knob to get the sound you want. To avoid unpleasant feedback, make sure you don’t point the microphone(s) at the speakers. 7 Sing!

54
En

Singing karaoke

10

· With Video CD/Super VCDs, make sure the STEREO audio channel option (also see Switching audio channels when playing a Video CD/Super VCD on page 42) is selected so that you can use the karaoke features. [. . . ] The higher the rate, the better the sound quality, but the more digital information is generated.

94
En

Additional information

17

Standard CD audio has a sampling frequency of 44. 1kHz, which means 44, 100 samples (measurements) per second. See also Digital audio.

WMA
WMA is short for Windows Media Audio and refers to an audio compression technology developed by Microsoft Corporation. WMA data can be encoded by using Windows Media Player version 8 or Windows Media Player for Windows XP. Files are recognized by their file extension «. wma» or «. WMA». [. . . ]