-
Contents
-
Table of Contents
-
Troubleshooting
-
Bookmarks
Quick Links
SAMSUNG SMARTCAM
User Manual
SNH-1011N
0678
!
Related Manuals for Samsung SMARTCAM SNH-1011N
Summary of Contents for Samsung SMARTCAM SNH-1011N
-
Page 1: User Manual
SAMSUNG SMARTCAM User Manual SNH-1011N 0678…
-
Page 2: Operational Description
Samsung Techwin Co., Ltd. and information being sent. Describe all modulation types and all data rates. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their Instructions &…
-
Page 3: Table Of Contents
• To avoid entangled cable lines, avoid using cable extension for adaptor’s power cord. MONITORING • The product’s servicing is allowed only to authorized Samsung Techwin’s service personnel. Registration …………………………………………………… 16 • When using the product for children’s care, be careful to keep the product out of children’s reach.
-
Page 4: Getting Started
Features • Easy to install — With the help of WPS (Wi-Fi Protected Setup), wireless sharing and easy connection are enabled. — Simply visit the home page (www.samsungsmartcam.com) and download and install the program without a separate installer program. • Remote monitoring — Whenever and wherever if you are in the Internet enabled environment, remote monitoring is ready for you.
-
Page 5: What’s Included
What’s Included Check for components when opening the product package. Camera & Bracket body Power Adaptor Network Cable Quick Start Guide Warranty Card GPL Lisence Double Sided Tape Tapping screw Plastic anchor Please save the packaging. You will need the serial number later to register the camera.
-
Page 6: Getting To Know Your Monitoring System
Detects light levels where the camera is placed. Produces sound transferred from a smart phone. Night vision mode changes according to detection result. SAMSUNG SMARTCAM RESET Reset button Power / Wi-Fi status LED Resets the camera settings to the default.
-
Page 7: Power Supply
Power Supply Network connection Plug-in the camera power adapter to the wall outlet and connect the camera as Connect the provided network cable to the camera’s network terminal. shown. For further details on network configuration, refer to “Network Connection and Settings”.
-
Page 8: Installation & Network Connection
Installation Precautions Install the camera in a place where the Wi-Fi signal can be reached and without interference. & NSTALLATION Keep it away from humidity such as around the humidifier. Keep it away from direct sunlight, strong light or dust; install it in a place with ETWORK ONNECTION clear view.
-
Page 9: Wall Mounting Using Double-Sided Adhesive Tape
Hold the adhesive tape’s holder and remove the protective film, and attach it Wall Mounting Using Double-sided adhesive tape to the desired spot of the wall-mount bracket while making the [▲ TOP] marker point upwards (direction of 12 o’clock). Separating the wall-mount bracket The tape will lose adhesiveness if used once, do not re-use.
-
Page 10
Run the provided adaptor wire through the Fix the body bracket by turning it clockwise until it clicks. groove prepared on the wall-mount bracket. Match adaptor’s plug part to the direction of 12 o’clock. Grooves on the body bracket Connect the adaptor’s plug to the power terminal on the camera’s rear side. -
Page 11: Wall Mounting With Screws
Adjusting the Angle Wall Mounting with Screws Adjust the camera’s shooting angle as appropriate. For more information about step of Separating the wall-mount bracket, refer to “Wall Mounting Using Double-sided adhesive tape”. Do not put excessive force. Otherwise, it may cause damage to the camera.
-
Page 12: Desktop Mounting
Use drill bit of 5mm diameter and drill on the Desktop mounting marked positions, drill to have 3 cm depth holes. Clean the holes after drilling. For more information about step of Separating the wall-mount bracket, refer to “Wall Be careful not to get injured while drilling. Mounting Using Double-sided adhesive tape”.
-
Page 13: Network Connection And Settings
DC IN 5V <Hub> the service. If this is the case, contact the service provider. NETWORK SAMSUNG SMARTCAM RESET <Modem> • Do not access the unauthorized network. • The farther the distance from the Wireless Access Point, the longer time the network connection may take.
-
Page 14: Connecting Via Wi-Fi Without Wps Feature
Press the WPS button on the camera for 1sec. Press the WPS button on the Wireless Access Point within 2min. WPS Button WPS Button DC IN 5V NETWORK SAMSUNG SMARTCAM <Wireless Access Point> RESET DC IN 5V RESET NETWORK SAMSUNG SMARTCAM…
-
Page 15
If the Wireless Access Point do not support WPS or you do not have wirelss router, please go to Wired Connection. If no WPS button is displayed or visible on the display, see the Wireless Access Point’s manual or contact the manufacturer of your Wireless Access Point for technical assistance. -
Page 16: Monitoring
Registration Once you register the product with the site, you can monitor the camera video on the PC or laptop computer. Web browser requirements Windows ONITORING Windows XP, 7 supported MAC OS X Snow Leopard or higher is supported — Internet Explorer 8, 9 (The 64-bit is not supported.) — Safari — Firefox…
-
Page 17: Plug In Installation
❖ Plug in installation Click <Install> to begin the installation. You need to install your plug in to automatically search for cameras connected to the network and view the video in your camera. If you login or click <Starting SmartCam> in a PC where the plug in is not installed, the installation message window will pop up.
-
Page 18
For Mac Enter password, and click <Install Software>. Click <Continue>. Installation has completed. Click <Install>. 18 · English… -
Page 19
Enter the requested information, and click <Sign Up>. According to the network connection and setting, click <Next> when the camera LED turns into green. • ID : Create user ID between 8 to 14 alphanumeric character. • Password : Create password between 8 to 14 alphanumeric character. Select the serial number of the camera to be added from the camera search •… -
Page 20
Create <Camera Name> and <Camera password>. Select your Wireless Network from the list. Click <Next>. Enter the password of your Wireless Network and click <Next>. The camera password is used to block the unauthorized access to your camera. Create camera password using alphanumeric characters between 1 to 8 without any space. -
Page 21: Live Video
Unplug the network cable from the camera and the router. Live Video Click <Finish> if the <Finish> button is activated. Select a camera from the camera list at the upper left hand of the screen. Once the camera is successfully registered, you can check the camera in the camera list.
-
Page 22: Monitoring Options
Item Description Monitoring options Enlarges current video to the maximum size of the monitor. Full screen Supported by Internet Explorer only. Set the IR lighting. Night Vision If you set the Night Vision to <OFF>, the camera will be operated only in color mode.
-
Page 23: Setup
Relay mode is added feature where the video from the camera is transmitted to Samsung server then retransmitted to the user’s computer. If you have trouble connection to the camera, visit «http://www.samsungsmartcam. com», go to support page, and refer to “Troubleshooting” on it.
-
Page 24: Network
If you change the camera password, you will be logged out and return to the camera Network password input page. The camera password can be changed only in admin mode. Keep the camera password in a safe place as it is used for viewing the live screen of <Wired Network>…
-
Page 25
If any of the manual settings is wrong, the network settings will not be applied. Item Description If you have both cable and wireless network connections simultaneously, the cable Wireless On/ You can select to activate or deactivate the wireless network network connection is prioritized. -
Page 26: Time
Time Alarm & Notification Camera has ability to send event notifications when motion or audio is detected. Item Description Specify whether to trigger the alarm or not, and specify the sensitivity. The higher the sensitivity is, the subtler motion/audio events will be Item Description detected.
-
Page 27
<YouTube> Notification <Picasa> Notification Automatically uploads 30 second clip to your private YouTube account. Automatically uploads a image to your private Picasa account. Select the Google. Select the Google. Check <Use> of YouTube. Check <Use> of Picasa. Enter your Gmail address and password. Enter your Gmail address and password. -
Page 28
<Gmail> Notification <Twitter> Notification The event alarm is sent through Gmail. When an event is detected, the notification message is sent to the user’s Twitter account. Select the Google. Select the Twitter. Check <Use> of Gmail. Click <Request URL>. Enter your Gmail address and password. Click <Access Twitter>. -
Page 29: Alarm Schedule
Push alarm Notification Alarm Schedule The push alarm is provided through the web viewer and mobile app in which the camera is registered. Set the desired time to activate alarms for the selected time period. • If this is set to enable, the video and image link recorded in YouTube and Picasa will be transferred to the listed friends in real time in the event of an alarm.
-
Page 30: Event Alarm
Event Alarm Information You can check the event alarm that occurred. Item Description Delete by dates Delete all the event alarms on the date. Select an event and double click on it. The video will be played. Play Video Video can be played only if you are logged into the Google account where you uploaded the video.
-
Page 31
My Account Support You can download the Samsung SmartCam mobile app and user guide. If you want to change your information, click < > icon and move to “Account” page and select an item (password and/or email address) and make changes as necessary. -
Page 32: Appendix
Specifi cations Specifications Item Description Video Imaging Device 1/5″ 3M CMOS PPENDIX Effective Pixels 2,048(H) x 1,536(V) Scanning System Progressive Synchronization Internal Specifications Lens Focal Length (Zoom Ratio) 2.87mm Specifications Product Appearance Angular Field of View (D/V/H) 65.1°/ 42.9°/ 54.1° Min.
-
Page 33
Item Description Item Description Operational Audio Communication 2-Way (Built-in Microphone, Speaker) On Screen Display (Web Browser, TCP/IP, DHCP, SMTP, DNS, RTSP, RTCP, RTP, HTTP, TCP, UDP, English, French, Germany, Spanish, Taiwan, Korean Protocol Local page) STUN, XMPP, SIP, uPNP, ICE, SNTP, IPv4, ICMP Day &… -
Page 34
Product Appearance 34 · English… -
Page 35: Troubleshooting
Troubleshooting Problem Action Video will not be — Event video will be uploaded in confidential mode. Login to the Google played in event account where you uploaded the video. alarms. If you encounter a problem with your system, see the table below to solve the problem as quickly and easily as possible.
-
Page 36: Correct Disposal Of This Product
(password and/or email address) and make changes as necessary. email address. Samsung Techwin cares for the environment at all product manufacturing stages, and Camera will be is taking measures to provide customers with more environmentally friendly products.
-
Page 37
TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Toll Free : 1-877-349-3149 Surrey, UNITED KINGDOM KT16 OPS www.samsungsv.com…
Краткое содержание страницы № 1
SAMSUNG SMARTCAM
User Manual
SNH-1011N
!
0678
Краткое содержание страницы № 2
SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER
Краткое содержание страницы № 3
• Especially, the power cord should be installed carefully while keeping it out of Contents children’s reach. • Never use the product near bath tub, sink, washing machine and in wet basement to avoid moisture. • The product is designed for indoor use. GETTING STARTED • The product is not designed for medical monitoring, and requires a grown-up’s protective supervision on its use. Features ……………………………………………………… 4 • To avoid overheating of the product, do not expose the product to direct sunlig
Краткое содержание страницы № 4
Features • Easy to install — With the help of WPS (Wi-Fi Protected Setup), wireless sharing and easy connection are enabled. — Simply visit the home page (www.samsungsmartcam.com) and download and install the program without a separate installer program. • Remote monitoring — Whenever and wherever if you are in the Internet enabled environment, remote monitoring is ready for you. — PC, laptop or smart phone can be used for monitoring. GETTING STARTED 01 • Real-time alarm — When a motion and s
Краткое содержание страницы № 5
Getting Started What’s Included Check for components when opening the product package. 01 Camera & Bracket body Power Adaptor Network Cable Quick Start Guide Warranty Card GPL Lisence Double Sided Tape Tapping screw Plastic anchor ` Please save the packaging. You will need the serial number later to register the camera. n 5
Краткое содержание страницы № 6
Getting to know your Monitoring system DC 5V Power Input Built-in IR LEDs for night vision Network port DC IN 5V Used if WPS is not supported on the Wireless High quality camera lens Access Point or if you do not have a Wireless Access Point NETWORK Luminance Sensor Built-in speaker Detects light levels where the camera is placed. Produces sound transferred from a smart phone. Night vision mode changes according to detection SAMSUNG SMARTCAM result. RESET Reset button Resets the camera sett
Краткое содержание страницы № 7
UNLOCK LOCK Getting Started Power Supply Network connection Plug-in the camera power adapter to the wall outlet and connect the camera as Connect the provided network cable to the camera’s network terminal. shown. For further details on network configuration, refer to “Network Connection and Settings”. (Page 13) 01 ` Make sure to use the provided power adaptor. Otherwise, the product may not operate n properly. LED status ` It will take about 1min for the camera to boot-up completely. LED
Краткое содержание страницы № 8
Installation Precautions 1. Install the camera in a place where the Wi-Fi signal can be reached and without interference. 2. Keep it away from humidity such as around the humidifier. INSTALLATION & 3. Keep it away from direct sunlight, strong light or dust; install it in a place with clear view. NETWORK CONNECTION 02 4. Do not install it in a place where there are a lot of obstacles. 5. Keep the lens clean at all times. Wipe off the dust with a soft cloth. 6. Switching between day and night
Краткое содержание страницы № 9
Installation & Network Connection UNLOCK LOCK 3. Hold the adhesive tape’s holder and remove the protective film, and attach it Wall Mounting Using Double-sided adhesive tape to the desired spot of the wall-mount bracket while making the [▲ TOP] marker point upwards (direction of 12 o’clock). ` The tape will lose adhesiveness if used once, do not re-use. Separating the wall-mount bracket n ` Before attaching tape, clean dust / water / oil off the wall-mount bracket’s adhesive 1. Press and ho
Краткое содержание страницы № 10
UNLOCK LOCK 4. Run the provided adaptor wire through the 6. Fix the body bracket by turning it clockwise until it clicks. groove prepared on the wall-mount bracket. ` Match adaptor’s plug part to the direction of 12 n o’clock. Grooves on the body bracket TOP 7. Connect the adaptor’s plug to the power terminal on the camera’s rear side. 5. Arrange the wire by using two grooves on the body bracket. ` When done, remove the protective film from n ` Make both body bracket’s [UNLOCK LOCK] and
Краткое содержание страницы № 11
Installation & Network Connection Adjusting the Angle Wall Mounting with Screws 1. Adjust the camera’s shooting angle as appropriate. ` For more information about step of Separating the wall-mount bracket, refer to “Wall n Mounting Using Double-sided adhesive tape”. ` Do not put excessive force. Otherwise, it may n cause damage to the camera. Assembling 1. Take out screws (M3xL20) and Anchor (Φ5×25) from the zipper bag. 02 2. On a wooden wall, use screws to fix the 2. Turn the part shown
Краткое содержание страницы № 12
UNLOCK LOCK 4. Use drill bit of 5mm diameter and drill on the Desktop mounting marked positions, drill to have 3 cm depth holes. Clean the holes after drilling. ` For more information about step of Separating the wall-mount bracket, refer to “Wall ` Be careful not to get injured while drilling. n J Mounting Using Double-sided adhesive tape”. Assembling 1. Assemble body bracket and wall-mount bracket while matching the [▼] and [▲] marks. 5. Insert an anchor for each hole. Fully insert anch
Краткое содержание страницы № 13
Installation & Network Connection Connecting via network cable Network Connection and Settings If you do not have a Wireless Access Point, you must connect the camera using LAN cable directly to your home router. Precautions 1. When you apply the power, the power status LED is lit red, and it will change to red blinking when the booting is completed. • The wireless network access may fail, depending on the communications environment. 2. Connect the network cable to the camera and to the home
Краткое содержание страницы № 14
Connecting via Wi-Fi without WPS feature Conneting using Wi-Fi WPS feature If you want to connect the camera using a non-WPS Wireless Access Point, What is WPS? change the network setting to Wire and try the wireless network. WPS enables to make connection between the camera and the Wireless Access Point with a simple click of the button. 1. When you apply the power, the power status LED is lit red, and it will change to red blinking when the booting is completed. 1. When you apply the power,
Краткое содержание страницы № 15
Installation & Network Connection ` If the Wireless Access Point do not support WPS or you do not have wirelss router, n please go to Wired Connection. ` If no WPS button is displayed or visible on the display, see the Wireless Access Point’s manual or contact the manufacturer of your Wireless Access Point for technical assistance. ` On some routers, you may need to log in to the web interface and click on an on-screen button to activate the WPS feature. ` If you fail to connect to the Inte
Краткое содержание страницы № 16
Registration Once you register the product with the site, you can monitor the camera video on the PC or laptop computer. Web browser requirements Windows Mac Windows XP, 7 supported MAC OS X Snow Leopard or higher is MONITORING 03 supported — Internet Explorer 8, 9 (The 64-bit is not supported.) — Safari — Firefox — Firefox — Chrome — Chrome Registration 16 Event Alarm 30 Web browser requirements 16 Starting SmartCam Starting SmartCam 16 Information 30 1. From your PC, launch your web browse
Краткое содержание страницы № 17
Monitoring ❖ Plug in installation 3) Click to begin the installation. You need to install your plug in to automatically search for cameras connected to the network and view the video in your camera. ` If you login or click in a PC where the plug in is not installed, n the installation message window will pop up. ` When you install the plug in, the web browser will be terminated and you need to launch it again. 1) Click , run the setup file. 4)
Краткое содержание страницы № 18
For Mac 4) Enter password, and click . 2) Click . 5) Installation has completed. 3) Click . 18 · English
Краткое содержание страницы № 19
Monitoring 5. Enter the requested information, and click . 6. According to the network connection and setting, click when the camera LED turns into green. • ID : Create user ID between 8 to 14 alphanumeric character. 03 • Password : Create password between 8 to 14 alphanumeric character. 7. Select the serial number of the camera to be added from the camera search • Confirm Password : Please enter the password again for confirmation. list. If the camera is not found, enter the
Краткое содержание страницы № 20
9. Create and . 12. Select your Wireless Network from the list. 10. Click . 13. Enter the password of your Wireless Network and click . ` The camera password is used to block the unauthorized access to your camera. n ` Create camera password using alphanumeric characters between 1 to 8 without any space. ` If your Wireless Network is hidden, select . n 11. After adding the camera, click in the wireless network
Посмотреть инструкция для Samsung SNH-1011N бесплатно. Руководство относится к категории камеры видеонаблюдения, 3 человек(а) дали ему среднюю оценку 8.9. Руководство доступно на следующих языках: английский. У вас есть вопрос о Samsung SNH-1011N или вам нужна помощь? Задайте свой вопрос здесь
Не можете найти ответ на свой вопрос в руководстве? Вы можете найти ответ на свой вопрос ниже, в разделе часто задаваемых вопросов о Samsung SNH-1011N.
Какой вес Samsung SNH-1011N?
Что означает аббревиатура MП?
Какая высота Samsung SNH-1011N?
Какая ширина Samsung SNH-1011N?
Какая толщина Samsung SNH-1011N?
Инструкция Samsung SNH-1011N доступно в русский?
Не нашли свой вопрос? Задайте свой вопрос здесь
1.
Tap <Add Camera>.
2.
Select the camera found and tap
<next>.
M
`
When your smartphone is
connected to the same WiFi
network as the camera, it will
automatically search for the
camera.
3.
If the camera is not detected,
please enter the camera serial
number manually.
M
`
For camera’s power and network
connection, refer to [ ].
`
For camera’s serial number
location, refer to [ ].
4. Camera Registration
4.
Create the <Camera
password> and <Camera
Name>, and then tap <Add>.
M
`
Create camera password using
alphanumeric characters between
1 to 8 without any space.
Camera Move
1.
Move to the <Camera> item.
From the listed active cameras,
tap the desired camera’s [ ]
on the right.
M
`
You cannot monitor an inactive
camera.
2.
You may find the Live, Event or
Setup icons.
Delete Camera
1.
To delete an added camera, tap
and slide from right to left on a
desired camera from the list.
2.
Tap <Delete>.
5. Camera
Смотреть руководство для Samsung SNH-1011N ниже. Все руководства на ManualsCat.com могут просматриваться абсолютно бесплатно. Нажав кнопку «Выбор языка» вы можете изменить язык руководства, которое хотите просмотреть.
MANUALSCAT | RU
Вопросы и ответы
У вас есть вопрос о Samsung SNH-1011N, но вы не можете найти ответ в пользовательском руководстве? Возможно, пользователи ManualsCat.com смогут помочь вам и ответят на ваш вопрос. Заполните форму ниже — и ваш вопрос будет отображаться под руководством для Samsung SNH-1011N. Пожалуйста, убедитесь, что вы опишите свои трудности с Samsung SNH-1011N как можно более детально. Чем более детальным является ваш вопрос, тем более высоки шансы, что другой пользователь быстро ответит на него. Вам будет автоматически отправлено электронное письмо, чтобы проинформировать вас, когда кто-то из пользователей ответит на ваш вопрос.
Задать вопрос о Samsung SNH-1011N
- Бренд:
- Samsung
- Продукт:
- камеры видеонаблюдения
- Модель/название:
- SNH-1011N
- Тип файла:
- Доступные языки:
- английский