инструкцияNewland HR15 BT Wahoo
SCANNING MADE SIMPLE
HR15 BT Wahoo
cordless handheld scanner
user guide
Посмотреть инструкция для Newland HR15 BT Wahoo бесплатно. Руководство относится к категории сканеры штрих-кода, 1 человек(а) дали ему среднюю оценку 9.3. Руководство доступно на следующих языках: английский. У вас есть вопрос о Newland HR15 BT Wahoo или вам нужна помощь? Задайте свой вопрос здесь
- Revision History
- Preface
- Chapter 1 Getting Started
- Chapter 2 Easyset
- Chapter 3 System Setting
- Chapter 4 Wireless Communication
- Chapter 5 RS-232 Interface
- Chapter 6 USB Interface
- Chapter 7 Symbologies
- Chapter 8 Data Formatter
- Chapter 9 Prefix & Suffix
- Chapter 10 Batch Programming
- Appendix
Главная
| Newland | |
| HR15 BT Wahoo | HR1580-BT-C | |
| сканер штрих-кода | |
| 5704174085669, 5706998418043 | |
| английский | |
| Руководство пользователя (PDF) |
Сканирование
| Тип | Переносной считыватель штрих-кода |
| Тип сканера | 1D |
| Тип сенсора | CCD |
| Поддерживаемые двухмерные штрих-коды | — |
| Поддерживаемые линейные (1D) штрих-коды | Codabar, Code 11, Code 128, Code 39, Code 93, EAN-13, EAN-8, GS1 DataBar, ISBN, ISSN, ITF-14, ITF-6, Interleaved 2 of 5, Matrix 2 of 5, Plessey, UPC-A, UPC-E |
| Угол тангажа при считывании | -60 — 60 ° |
| Скорость чтения (макс) | 6 считываний/с |
Энергопитание
| Тип источника питания | Аккумулятор |
| Емкость батареи | 2200 mAh |
| Тип батареек | Встроенная батарея |
| Технология батареи | Литий-ионная (Li-Ion) |
| Входное напряжение | 5 V |
| Срок службы батареи | 12 h |
| Время зарядки | 4 h |
Вес и размеры
| Вес | 213 g |
| Ширина | 113.5 mm |
| Глубина | 73.3 mm |
| Высота | 159 mm |
Порты и интерфейсы
| Технология подключения | Беспроводной |
| Стандартные интерфейсы | RS-232, USB |
| Версия Bluetooth | 5.0 |
Производительность
| Сертификация | FCC Part15 Class B, CE EMC Class B |
| Цвет товара | Черный |
| Защитные возможности | Защита от электростатического разряда |
| International Protection (IP) код | IP42 |
| Светодиодные индикаторы | Да |
| Зуммер | Да |
| Встроенный экран | Нет |
Условия эксплуатации
| Диапазон температур при эксплуатации | -20 — 50 °C |
| Диапазон температур при хранении | -40 — 70 °C |
| Диапазон относительной влажности при эксплуатации | 5 — 95 % |
Данные об упаковке
показать больше
Не можете найти ответ на свой вопрос в руководстве? Вы можете найти ответ на свой вопрос ниже, в разделе часто задаваемых вопросов о Newland HR15 BT Wahoo.
Какой вес Newland HR15 BT Wahoo?
Какие сертификаты Newland HR15 BT Wahoo имеет?
Какая высота Newland HR15 BT Wahoo?
Какая ширина Newland HR15 BT Wahoo?
Какая толщина Newland HR15 BT Wahoo?
Инструкция Newland HR15 BT Wahoo доступно в русский?
Не нашли свой вопрос? Задайте свой вопрос здесь
-
Page 1: Newland NLS-HR1550-3E
NLS-HR15Series NLS-HR15XX-3 E Cordless 1D Ba rcode Scanner User Guide[…]
-
Page 2: Newland NLS-HR1550-3E
© 2012 by New land Auto -ID Tech. Co., Ltd. All rig hts reserved. Please ca refully read the manual before use the product, an deffectively to protect the sa fet y o f products operation. Please keep this manual after reading prop erly and save for the next reading. Do not disassemble the d evice or tearing the seal lab el on the d evi ce . Otherw[…]
-
Page 3: Newland NLS-HR1550-3E
Table of Contects Preface ……………………………………………………………………………………………………………………………………………………………………………………… 1 Introduction ………………………………………………………………………………………..[…]
-
Page 4: Newland NLS-HR1550-3E
SetupProcess Flow …………………………………………………………………………………………………………………………………………………… 17 Default Setup ………………………………………………………………………………………………………………………………..[…]
-
Page 5: Newland NLS-HR1550-3E
Add Custom Prefix or Not ………………………………………………………………………………………………………………………………………….. 35 Define the Custom Prefix …………………………………………………………………………………………………………………………[…]
-
Page 6: Newland NLS-HR1550-3E
Set Whether or not to Read 5-Digit Extracode …………………………………………………………………………………………………………… 49 Extended Setup ……………………………………………………………………………………………………………………………………………….[…]
-
Page 7: Newland NLS-HR1550-3E
Allow to Read Deutsche14 or not ………………………………………………………………………………………………………………………………. 62 CodeID Setup …………………………………………………………………………………………………………………………………………[…]
-
Page 8: Newland NLS-HR1550-3E
Allow to Read Codabar or not ……………………………………………………………………………………………………………………………………. 75 CodeID Setup ………………………………………………………………………………………………………………………………………[…]
-
Page 9: Newland NLS-HR1550-3E
CodeID Setup ……………………………………………………………………………………………………………………………………………………………. 89 Chapter 7 Appendix ……………………………………………………………………………………………………………………….[…]
-
Page 10: Newland NLS-HR1550-3E
[…]
-
Page 11: Newland NLS-HR1550-3E
1 Preface Introduction This manual provides information about using the NLS-HR15 series1D barcode cordlessscanner:NLS-HR15XX- 3E . (Hereinafter refer to as “HR15 cordless s canner”) Chapter Descriptions Chapter1,Getting Started :Generaldescription of HR15 cordless scanner included ing all the parameters of HR15 cordless scanner. Chapter[…]
-
Page 12: Newland NLS-HR1550-3E
2 Chapter 1 Getti ng Started Introduction HR15 cordless scanner is a ty pe of 1D barcode scanner with ex cellent performance, except for all the n ormal 1D barcode, it also can read the sta cked 2D barcode such as PDF417 and the MicroPDF17. Based on the self -independent technology of Newland, HR15 cordless scanner i s able to perform rapid image a[…]
-
Page 13: Newland NLS-HR1550-3E
3 CD15 Cradle The main parts of CD15 cradle are shown in the following pict ure. Button Definition ： P ： Batch Transmission M ： Pair/Sea rch LED Indicator Definition ： Blue ： Wireless Network Green ： 4 Levels Power Indicator Communication mode There are 3 types of communication mode: Synchronized, A synchronized (factory default) and Ba[…]
-
Page 14: Newland NLS-HR1550-3E
4 Synchronized mode: HR15 w ithin wireless coverage area, barcode data will transfer to the host PC immediately after successful decoded, and fail transfer when out of the coverage area. Asynchronized mode: HR15 within w ireless coverage area, the barcode d ata will be transmitted to the host PC immediately aft er successful decoded. HR15 o[…]
-
Page 15: Newland NLS-HR1550-3E
5 USB USB interface on the host RS232 RS232 interface on the host Please check the port on the host and purchase the right cab le. Using USB C able Connect the CD15 cradle with host PC through USB cable. 1. Plug the RJ45 connector into CD15 communication port. 2. Plug the USB connector into host PC USB port.[…]
-
Page 16: Newland NLS-HR1550-3E
6 Using RS232 Cable Connecting the CD 15 cradle with host through RS232 cable: 1 Plug the RJ45 connector into HR15 scanner . 2 Plug the RS232 connector into Host. 3 Connect the RS232 cable with power adapter . Power-on, Power-off, Sleep, Reboot Power- on Connect the HR15 with the host, the HR15 will power on automatically (factory default). Power-o[…]
-
Page 17: Newland NLS-HR1550-3E
7 Reboot If the HR15 no response or abnormal, please pull out the cable from Host PC then plug again to reboot the HR15. Reading Window Maintenance The scanning window should ke ep clean. Avoid hard and rough objects to clean the reading window that will easy to cause the damage or scratch. Use soft brush to remove the stain on the scan[…]
-
Page 18: Newland NLS-HR1550-3E
8 Reading Depth of Field[…]
-
Page 19: Newland NLS-HR1550-3E
9 Specification Performance Light Source 620nm Visible Red LED Scan Pattern CCD linear image Symbologies Code128, EAN-13, EAN-8, Code39,UPC-A, UPC-E, Codabar, I nterleaved 2 o f 5, ISBN,Code 93, UCC/EAN-128, GS1 Databar, PDF417, MicroPDF417 etc. (Cordless model reading PDF417/MicroPDF417data length is less than 255 bytes) Resolution ≥ 4mil Scan A[…]
-
Page 20: Newland NLS-HR1550-3E
10 FCC Part15 Class B, CE EMC Class B, CCC Test condition: Code39 , Data length=3bytes ,M inimum space width= 10mil , W idth r adio=2.5:1 , PCS=0.8, Barcode height=11mm, Testing distance=120mm,Envirmenttemperature =23 ℃ , En vi rment light Illumination = 200 LUX Overview Left View The picture below is the left view of HR15 scanner. Front Vie w Th[…]
-
Page 21: Newland NLS-HR1550-3E
11 CD15Ceadle Previe w Barcode Reading Make sure the scanner, data cable and power are properly connectedbefore turn on the pow er. Pressing the trigger to activate the illumination light, then the red illuminating line will appear. For the same batch of barcode, the scanne r will keep a very hig h success ra tio in certain distance, wh[…]
-
Page 22: Newland NLS-HR1550-3E
12[…]
-
Page 23: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 13 Chapter 2 Gene ral Configuration Introduction There are two ways to set up the barcode engine. Setting Bar code To u se d reading a series of special barcode to setting the barcode engine. In the following sections, we will introduce the available set of options and features and provide a corresponding set[…]
-
Page 24: Newland NLS-HR1550-3E
【 S tart Setup 】 14 【 Exit Setup 】 Use the Setting Barcodes The s etup function will be activ ated by reading the “ Start Setup ” barcode.The procedure of configurating can be done by reading more than one setup barcodes. If any itme or function needs more parameters, such as check byte, please see the last section in this chapt[…]
-
Page 25: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 15 Use the Setup Command The setup command is based on t he communication serial port; it is meant to use t he visible charaters from 0x20 to 0x7D to describe all the content. Setup Stat e W he n the function setup is c arried out through serial communication mode, the device must be set into the “s etup st[…]
-
Page 26: Newland NLS-HR1550-3E
【 S tart Setup 】 16 【 Exit Setup 】 D390ADC8D38FF5E6D99DAA|E1DFA587}” 8. If the setting command contains pa rameters, then the command will be combined according to the command system definition. For example: The combined c ommand s tring which is sto p b y 0x0D and 0x 0A . The combined sending commands are: “#99904112;#99900000;#9990001[…]
-
Page 27: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 17 SetupProc ess Flow[…]
-
Page 28: Newland NLS-HR1550-3E
【 S tart Setup 】 18 【 Exit Setup 】 Default Setup Factory Default Setting All th e sc anners h ave the factory d efault setting, by reading the “Restore to Factory Default” barcode, the scanner will restore the factory default. 【 Restore to Factory Default 】 Work Mode Selection 【 Power Off 】 【 Reboot 】 【 T e st mode 】 Not[…]
-
Page 29: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 19 Power off Timer The HR15 cordless scannerwill power-off automatically if it hibernates overtime (default: 5 minutes) 【 Auto power off after 5 minutes in sleep mode . 】 【 Auto power off after 10 minutes in sleep mode 】 【 Auto power off after 20 minutes in sleep mode . 】 【 Auto power off after […]
-
Page 30: Newland NLS-HR1550-3E
【 S tart Setup 】 20 【 Exit Setup 】 Auto Scan ning Mode Press the trigge r after setup, the scanner will a utomatically startthe next scan after finish a successful reading; the scanner will stop until the trigger is pressed again. In the default mode, it is not allowed to repeatedly read the same barcode. 【 Auto Scanning Mode 】 In the a[…]
-
Page 31: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 21 Intermittent Reading Mode Device will intermittent reading the barcode. W hether reading successful or not, the reading twice intervals are fixed, intermittent time default value is 1sec, this value can be change. T he length of reading time is fixed on 100 ms. 【 Intermittent Reading 】 【 Set the Scan[…]
-
Page 32: Newland NLS-HR1550-3E
【 S tart Setup 】 22 【 Exit Setup 】 【 Set the Barcode Reading T i me 】 【 Set the Scanning T ime Interv als 】 The customer can select the sensitity according to the environmrnt, in order to increase the reading efficiency. 【 High Sensitivity 】 【 Low Sensitivity 】 【 Medium Sensitivity 】 【 Custom Sensitivity 】 Sensitivit[…]
-
Page 33: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 23 【 Continuous Reading 】 The scanner can set the time interval of scanning in the continuous reading mode. 【 T ime Interval of Scanning 】 Note ： In the continuous reading m ode, the time in terv al of s canning is in unit of 500ms, the parameter ranges from 0 to 7500ms Extended S ense Readin g Mode[…]
-
Page 34: Newland NLS-HR1550-3E
【 S tart Setup 】 24 【 Exit Setup 】 To stop b arcode scanning by s ending t he stop c ommand in the terminal (such as PC) or reading the “Stop Simulating Trigger”, and require a 2 -Digit character passback （ such as 0A,0X,etc., ） 【 Begin Simulating T ri gger 】 【 Commnad T riggered Scanning 】 【 S top Simulating T rigg er 】[…]
-
Page 35: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 25 Decoding Sound Setup 【 T urn off Decoding Au dio 】 【 Intermediate Frequency — Weak 】 【 High Frequency — Laud 】 【 Low Frequency — Laud 】 【 High Frequency — M edian 】 【 Low Frequency — Weak 】 【 High Frequency — Weak 】 【 150ms Sound Length 】 【 Intermediate Frequency — Laud ?[…]
-
Page 36: Newland NLS-HR1550-3E
【 S tart Setup 】 26 【 Exit Setup 】 Other Setup Activ ate/Abort Temporary Mute 【 Active T empora ry M ute 】 【 Exit T empo r ary Mute 】[…]
-
Page 37: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 27 Ch ap t er 3 Inquir y Command Introduction In order to inquire, the HR15 cradle information can feed back to the host by reading the setup barcode. 【 Inquire all the Information 】 【 Inquire the Release Date 】 【 Inquire the Firmware Information 】 【 Inquire the Product Name 】 【 Inquire the […]
-
Page 38: Newland NLS-HR1550-3E
【 S t art Setup 】 28 【 Exit Setup 】 Inquire the Product-Name of the Cradle Inquire the Wireless Module Information In order to inquire, the HR15 cradle information can feed back to the host by reading the se tup barcode. Inquire the numbers of barcodes in memory Clear the barcodes in memory Inquire the S tate of the W ir eless Module[…]
-
Page 39: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 29 Chapter 4 Communicati on Setup HR15 Communication Mode Setup Communication modes include: Synchronous , A synchronous and Batch mode. Synchronous mode: the HR15 will transmit th e barcode data to the CD cradle after collecting when the network is connected. If there is no network connection, the transm[…]
-
Page 40: Newland NLS-HR1550-3E
【 S t art Setup 】 30 【 Exit Setup 】 【 9600 】 【 1 200 】 【 2 400 】 【 4800 】 【 14400 】 【 19200 】 【 38400 】 【 57600 】 【 1 1520 0 】[…]
-
Page 41: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 31 Check Setu p 【 No Check 】 【 Even Check 】 【 Odd Check 】 Stop Bit 【 1 S top Bit 】 【 2 S top bits 】 Flow Contr ol Setup No Flow Control CTS Flow Control RTS Flow Control RTS_CT S Flow Control[…]
-
Page 42: Newland NLS-HR1550-3E
【 S t art Setup 】 32 【 Exit Setup 】 Data Bit 8 Data Bits 8 Data Bits, no Chec k, 2 S top Bit 8 Data Bits, no Chec k, 1 S top Bit 8 Data Bits, Ev en Check, 2 S top Bit 8 Data Bits, Even Check, 1 S top Bit 8 Data Bits, Odd Che ck, 2 S top Bit 8 Data Bits, Odd Che ck, 1 S top Bit 7 Data Bits, Ev en Check, 2 S top Bit 7 Data Bits 7 Data Bits, O[…]
-
Page 43: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 33 CD15 Cradle USB Function Setup USB Virt ual Keyboar d Function USB Virtual Keyboard Function USB Virt ual Serial Port Function USB Virtual Serial Port Functi on Keyboard Function Setup Keyboard Layout 1 st American English 7 th Italy 2 nd Japanese 8 th Norway 3 rd Danish 9 th S pan ish 4 th Finland 10 th T[…]
-
Page 44: Newland NLS-HR1550-3E
【 S t art Setup 】 34 【 Exit Setup 】 5 th France 1 1st Brit ain 6 th T urkey F Set the Delay bet ween Charact ers The range of th e delay time be tween characters is from 0 to 75 ms, it takes 5ms as one level, totally 15 levels. The default value is 0ms. Delay Setup Between Characters Character Conversion No Conversion All Lowercase Letter A[…]
-
Page 45: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 35 Chapter 5 Data Form at Setup Introduction After successful barcode reading, the customer will receive a string of da ta which can be numbers, English characters symbols and so on, this string of data is the data information included in the barcode. The barcode data information may not be enough in the ap p[…]
-
Page 46: Newland NLS-HR1550-3E
【 S t art Setup 】 36 【 Exit Setup 】 For ex ample, it is allowed to a dd custom prefix and set the prefix to character string “AB”, by readin g the barcode with data “123”, the scanner adds ”AB” before “123, and the host will receive “AB123”. It is not Allow to Ad d Custom Prefix Allow to Add Custom Prefix Define the C usto[…]
-
Page 47: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 37 It is not Allow to Ad d AIMID Prefix Allow to Add AIMID Prefix Code ID Prefix Except for using AIM prefix to iden t ify different barcode, the customers also can u se CodeID prefix to perform the same function. Different from the AIM prefix, the customer can define the CodeId prefix corresponding to every […]
-
Page 48: Newland NLS-HR1550-3E
【 S t art Setup 】 38 【 Exit Setup 】 which will be set, according to priority. Set the Custom suffix For example: Set the custome suffix to “AGE” (the hexadecimal value is 0x 41/0x47/0x45) 1. Read the “ Start Setup” barcode . 2. Read the “Set the Custom Suffix ” barcode . 3. Read the following number code:“4”“1”“4”“[…]
-
Page 49: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 39 Set the End Mark Suffix Set the end m ark suf fix to 0x 0D, ,and mak e it can b e sent Set the end mark suffix to 0x0D,0x0A ,and make it can be sent For Example: Set the end mark of Windows Operation System to “newline” 1. Read the “ Start Setup” barcode . 2. Read the ”Set the End Mark Suffix” […]
-
Page 50: Newland NLS-HR1550-3E
【 S t art Setup 】 40 【 Exit Setup 】 Chapter 6 Barc ode Parameter Setup Introduction Every kind of barcode has its o wn special character; the customer can adjust the scanner to suit the character changes by the setup barcode introduced in this chapter. The customer ca n also forbid the scanner to rea d the barcode types which are not used i[…]
-
Page 51: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 41 CodeID Setup Example: Set the CodeID of Code 128 to “p” (the hexadcimal value is 0x70): 1. Read the “ Start Setup ” b arcode. 2. Read the “CodeID S etup ” barcode. 3. Read the numeric barcode “7”, “0” (see the appendix— numeric barcode) 4. Read the ”Save” (see the appendix— nume[…]
-
Page 52: Newland NLS-HR1550-3E
【 S t art Setup 】 42 【 Exit Setup 】 9. Read the “ Exit Setup ” b arcode. UCC/EAN- 128 Restore Default Value By reading the barcode, the parameter setup of UCC/EAN-128 will be restored to the factory default state. Restore the Default Setup V alue of UCC/EAN-128 Allo w to Read UCC/EA N-128 or not Allow to Read UCC/EAN-128 Prohibit Readin[…]
-
Page 53: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 43 3. Read the numeric barcode “7”, “0” (see the appendix— numeric barcode) 4. Read the “Save” barcode.(see the appendix — nume ric barcode) 5. Read the “Exit Setup” b arcode. Set the Barcode Readi ng Lengt h The scanner is only able to read the UC C/EAN -128 whose tramsmission content len[…]
-
Page 54: Newland NLS-HR1550-3E
【 S t art Setup 】 44 【 Exit Setup 】 Restore the Default Setup V alue of UCC/EAN -128 AIM 128 A llow to Read A IM-128 or n ot Allow to Read AIM- 128 Prohibit Reading AIM- 128 Note:the scanner will become unable to read AIM- 128 by reading the s etup barcode “Prohibit Reading AIM — 128”, thus, if the scanner is unable to read the AIM- 128[…]
-
Page 55: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 45 Read the barcode of “Set the M inimum Length Limit” to adjust the minimu m length limit . Read the barcode of “Set the M aximum Le ngth Limit” to adj ust the maximum length limit Set the Maximum Length Limi Set the Minimum Length Limit Note ： the maximum l ength limit of any 1D barcode mu[…]
-
Page 56: Newland NLS-HR1550-3E
【 S t art Setup 】 46 【 Exit Setup 】 Note:the scanner will become unable to read EAN -8 by reading the setup barcode “Prohibit Rea ding EAN -8 ”, thus, if the scanner is unable to read the EAN -8 , please try to read the setuo barcode “allow to read EAN-8 ”. Code ID Setup To activate th e setup fu nction by reading “CodeID setup”[…]
-
Page 57: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 47 Note: By setting “Allow to Read 2 — Digit Ex tracode ”, the scanner can re ad the new barcode consisted of no rmal barcode and extracode, and the normal barcode without ex tracode. By setting “Do not read the 2 -Digit Extracode”, the scanner can only read the normal barcode p art of the new[…]
-
Page 58: Newland NLS-HR1550-3E
【 S t art Setup 】 48 【 Exit Setup 】 Note:the scanner will become unable to read EAN- 13 by rea ding the setup barcode “Prohib it Reading EAN — 13”, thus, i f the scanner is unable to read the EAN-13, please try to read the setuo barcode “allow to read EAN — 13”. Set Wheth er or not to Send the C heck Digit The data o f EAN-13 barcod[…]
-
Page 59: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 49 Set Wheth er or not to Read 2-Digit Extr acode 2-Digit extended code means to add 2-digit numeric barcode behind the normal barcode. Do not read the 2-Digit Extracode Allow to Read 2-Digit Extracode The Barcode Must Include 2-Digit Extracode Set Wheth er or not to Read 5-Digit Extr acode 5-Digit extended c[…]
-
Page 60: Newland NLS-HR1550-3E
【 S t art Setup 】 50 【 Exit Setup 】 Extend the Barcode into 13-Digits EAN-13, and lead by 0, means extend the data le ngth but keep the barcode type unchanged. Extend the Barcode and Transfer into EAN- 13 , means extend the barcode type and data length. Do not Extend the Barcode into 13-Digit EAN- 13 Extend the Barcode into 13-Digit[…]
-
Page 61: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 51 CodeID Setup Example: Set the CodeID of ISSN to “p” (the hexadcimal value is 0x70). 1. Read the “ Start Setup ” b arcode. 2. Read the “CodeID S etup ” barcode. 3. Read the numeric barcode “7”, “0” (see the appendix— numeric barcode) 4. Read the “Save” barcode.(see the appendix —[…]
-
Page 62: Newland NLS-HR1550-3E
【 S t art Setup 】 52 【 Exit Setup 】 Code ID Setup To activate the setup function by reading “CodeID setup”, the n read and save t he hexadcimal value i naccordance with the character which will be set to the CodeID. CodeID Setup Example: Set the CodeID of ISB N to “p” (the hexadcimal value is 0x70). 1. Read the “ Start Setup ” b[…]
-
Page 63: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 53 digit . Send the Check Digit Do not Send the Check Digit CodeID Set up To activate the setup function by reading “C odeID setup”, then read a nd save the hex adcimal value inaccordance with the character which will be set to the CodeID. CodeID Setup Example: Set the CodeID of UPC-E to “p” (the hexa[…]
-
Page 64: Newland NLS-HR1550-3E
【 S t art Setup 】 54 【 Exit Setup 】 Set Wheth er or not to Read 5-Digit Extr acode 5-Digit extended code means to add 5-Digit numeric barcode behind the normal barcode. Do not read the 5-Digit Extracode Allow to read the 5-Digit Extracode The Barcode Must Include 5-Digit Extracode Note: By setting “Allow to Read 2 -Digit Ex tracode ?[…]
-
Page 65: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 55 Do not Extend the Barcode Infornmation Extend the Barcode Infornmation into UPC-A Extend the Barcode Infornmation and T ype into UPC -A UPC-A Restore Default Value By reading the barcode, the parameter setup of UPC-A will be restored to the factory default state. Restore the Default Setup V alue of UPC -A […]
-
Page 66: Newland NLS-HR1550-3E
【 S t art Setup 】 56 【 Exit Setup 】 1. Read the “ Start Setup ” b arcode. 2. Read the “CodeID S etup ” barcode. 3. Read the numeric barcode “7”, “0” (see the appendix— numeric barcode) 4. Read the “Save” barcode.(see the appendix — numeric barcode) 5. Read the “Exit Setup” barcode. Set Wheth er or not to Transimi[…]
-
Page 67: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 57 Set Wheth er or not to Read 5-Digit Extr acode 5-Digit extended code means to add 5-digit numeric barcode behind the normal barcode Do not read the 5-Digit Extracode Allow to Read 5-Digit Extracode The Barcode Must Include 5-Digit Extracode Note: By setting “Allow to Read 2 — Digit Extracode”, the […]
-
Page 68: Newland NLS-HR1550-3E
【 S t art Setup 】 58 【 Exit Setup 】 Interleaved 2 of 5”, thus, if the scanner is unable to read the I nterleaved 2 of 5, please try to read the setuo barcode “all ow to read Interleaved 2 of 5 ”. Code ID Setup To activate th e setup fu nction by reading “CodeID setup”, then rea d the hex adcimal value in accordance with the charac[…]
-
Page 69: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 59 Note: by setting “do not send the check digit”, if the data length except for the 1 character check di git is less than the minimum barcode reading limit, the barcode reading will be failed. (For example: the scanner set the the minimum barcode reading length of Interleaved2 of 5 to 4 c haracter s and […]
-
Page 70: Newland NLS-HR1550-3E
【 S t art Setup 】 60 【 Exit Setup 】 Allow to Read ITF-6 and T ransmit the Check Digit Note: if the setup of ITF-6 confilits with the setup of Int erleaved2 of 5 .for example, reading ITF-6 is allowed, but reading Interleaved2 of 5 is not, a ccording to the priority principle of ITF-6, the Interleaved2 of 5 with the ba r code length of 6 cha[…]
-
Page 71: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 61 Prohibit Reading ITF- 14 Allow to Read ITF-14 and T ransmit the Check Digit Note: if the setup of ITF — 14 confilits with the setup of Interleaved2 of 5 , for example, reading ITF- 14 is allowed, but reading Interleaved2 of 5 is not; according to the priority princ iple of ITF — 14 , the In terleav ed2 of […]
-
Page 72: Newland NLS-HR1550-3E
【 S t art Setup 】 62 【 Exit Setup 】 Allo w to Read Deutsc he14 or not Allow to Read Deutsche14,but do not send the check digit Prohibit Reading Deutsche14 Allow to Read Deutsche14 and send the check digit Note: the sca nner will become unab le to read Deutsche14 by reading the setup barcode “Prohibit Reading Deutsche14”, thus, if th e s[…]
-
Page 73: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 63 Restore the Default Setup V alue of Deutsche12 Deutsche 12 Allo w to Read Deuts che 12 or n ot Allow to Read Deutsche12,but do not send the check digit Prohibit Reading Deutsche12 Allow to Read Deutsche12 and send the check digit Note: the sca nner will become unab le to read Deutsche12 by reading the setu[…]
-
Page 74: Newland NLS-HR1550-3E
【 S t art Setup 】 64 【 Exit Setup 】 COOP 25(Jap anese M atrix 2 of 5) Restore th e Default Val ue By reading the barcode, the parameter setup of COOP25 will be restored to th e factory default state Restore the Default Setup V alue of COOP25 Allo w to Read COOP 2 5 or not Allow to Read COOP25 Prohibit Reading COOP25 Note: the scanner will b[…]
-
Page 75: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 65 Check Setu p COOP25 barcode data does not compulsively include the check digi t, if c heck digit e x ists, then it is the last character. Check digit is calculated according to all the datas, for checking if the data is corr ect or not. Set “No Check”, the scanner will transmit all the barcode data[…]
-
Page 76: Newland NLS-HR1550-3E
【 S t art Setup 】 66 【 Exit Setup 】 minimum length, then the scanner is only able to read t he barcodes w ith the minimum length and the t he maximum l ength; if the maximum length equals to the minimum length, then the scanner is only able to read the barcode w ith such length. Matrix 2 of 5 (European Matrix 2 of 5) Restore th e Default Va[…]
-
Page 77: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 67 Check Setu p Matrix 2of 5 barcode data does not compulsively include the c heck digit, if c heck digit exists, th en it is the last character. Check digit is calculated according to all the datas, for checking if the data is corr ect or not. Set “No Check”, the scanner will transmit all the barco d[…]
-
Page 78: Newland NLS-HR1550-3E
【 S t art Setup 】 68 【 Exit Setup 】 Note ： the maximum l ength limit of any 1D barcode must not exceed 255, if th e maximum length is shorter than the minimum length, then the scanner is only able to read t he barcodes w ith the minimum length and the t he maximum l ength; if the maximum length equals to the minimum length, then the scann[…]
-
Page 79: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 69 3. Read the numeric barcode “7”, “0” (see the appendix— numeric barcode) 4. Read the “Save” barcode.(see the appendix — numeric barcode) 5. Read the “Exit Setup” barcode. Check Setu p Industrial 25 barcode da ta does not compulsively include the check digit, if check digit exists, then […]
-
Page 80: Newland NLS-HR1550-3E
【 S t art Setup 】 70 【 Exit Setup 】 Set the Minimum Length Limit Set the Maximum Length Limit Note ： the maximum l ength limit of any 1D barcode must not exceed 255, if th e maximum length is shorter than the minimum length, then the scanner is only able to read t he barcodes w ith the minimum length and the t he maximum l ength; if the m[…]
-
Page 81: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 71 Code ID Setup Example: Set the CodeID ofStandard 25 to “p” (the hexadcimal value is 0x70). 1. Read the “ Start Setup ” b arcode. 2. Read the “CodeID S etup ” barcode. 3. Read the numeric barcode “7”, “0” (see the appendix— numeric barcode) 4. Read the “Save” barcode.(see the appen[…]
-
Page 82: Newland NLS-HR1550-3E
【 S t art Setup 】 72 【 Exit Setup 】 Set the Barcode Readi ng Lengt h The s canner is only able to read th e Standa rd 25 with tramsmission c ontent l ength falls in the limited range, the range is consisted of the maximum val ue and minimum value in units of character , the Standard25 exceeds the range can not be read or transmitted. Re[…]
-
Page 83: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 73 CodeID Set up To activate th e set up function by reading “CodeID set up”, then read the hex adcimal value inaccordance with the character which will be set to the CodeID. Code ID Setup Example: Set the CodeID of Code39 to “p” (the hexadcimal value is 0x 70). 1. Read the “ Start Setup ” b arcod[…]
-
Page 84: Newland NLS-HR1550-3E
【 S t art Setup 】 74 【 Exit Setup 】 Set whet her to Send t he start and st op char acter or not There are two characters of “*”before and after the Code39 barcode data as the start and stop character. The system can set whether or not to send the start and stop character after s uccessful barcode reading. Send the S tart and the S top C[…]
-
Page 85: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 75 maximum leng th; if the maximum length equals to the minimum length, then the scanner is only able to read the barcode with such length. Example: The steps of set the scanner read the Code 39 with barcode length between 8 to 12 characters. 1. Read the “ Start Setup ” barcode. 2. Read the barcode of “[…]
-
Page 86: Newland NLS-HR1550-3E
【 S t art Setup 】 76 【 Exit Setup 】 Code ID Setup Example: Set the CodeID of Codabar to “p” (the hexadcimal value is 0x 70). 1. Read the “ Start Setup ” b arcode. 2. Read the “CodeID S etup ” barcode. 3. Read the numeric barcode “7”, “0” (see the appendix— numeric barcode) 4. Read the “Save” barcode.(see the append[…]
-
Page 87: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 77 Start and Sto p Characte r Setup Do not Send the S tart and S top Characte r Send the S tart and S top Character Set “ABCD/ABCD” as the S tart and S to p Character Set “ABCD/TN*E” as the S tart and S top Character Set “abcd/abcd” as the S t art and S top Character Set “abcd/tn*e” as the S t[…]
-
Page 88: Newland NLS-HR1550-3E
【 S t art Setup 】 78 【 Exit Setup 】 4. Read the “Save” barcode.(see the appendix — numeric barcode) 5. Read the barcode of “Set the M aximum Len gth Limit” . 6. Read the numeric barcode “1” . 7. Read the numeric barcode “ 2” . 8. Read the “Save” barcode.(see the appendix — numeric barcode) 9. Read the “Exit Setup?[…]
-
Page 89: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 79 2. Read the “CodeID S etup ” barcode. 3. Read the numeric barcode “7”, “0” (see the appendix— numeric barcode) 4. Read the “Save” barcode.(see the appendix — numeric barcode) 5. Read the “Exit Setup” barcode. Check Setu p Code 93 barcode data does n ot compulsively include the check[…]
-
Page 90: Newland NLS-HR1550-3E
【 S t art Setup 】 80 【 Exit Setup 】 Set the Minimum Length Limit Set the Maximum Length Limit Note ： the maximum length limit of any 1D barcode must not exceed 255, if th e maximum length is shorter than the minimum length, then the scanner is only able to read the bar codes with the minimum length and the the maximum length; if the maxim[…]
-
Page 91: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 81 1. Read the “ Start Setup ” b arcode. 2. Read the “CodeID S etup ” barcode. 3. Read the numeric barcode “7”, “0” (see the appendix— numeric barcode) 4. Read the “Save” barcode.(see the appendix — numeric barcode) 5. Read the “Exit Setup” barcode. Check Setu p Code 11 barcode dat[…]
-
Page 92: Newland NLS-HR1550-3E
【 S t art Setup 】 82 【 Exit Setup 】 able to read the Code 11 with 4 characters. ) Set the Barcode Readi ng Lengt h The sc anner is onl y able to read th e Code 11 with tramsmission content length falls in the limited range, the range is consisted of the maximum value and minimum value in units of character (the maxi m um value and minimum v[…]
-
Page 93: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 83 Restore the Default Setup V al ue of Plessey Allo w to Read Plessey or not Allow to Read Plessey Prohibit Reading Plessey Note: the scanner will become unable to read P lessey by readi ng the setup barcode “Prohibit Reading Plessey”, thus, if the scanner is unable to read the Plessey, please try to rea[…]
-
Page 94: Newland NLS-HR1550-3E
【 S t art Setup 】 84 【 Exit Setup 】 scann er will indicate “barcode reading failed” Note: by setting “do not send the check digit”, if the data length except for the 1 character check d igit is less than the minimum barcode reading limit, the barcode reading will be failed. (For example: the scanner s et the the minimum barcode read[…]
-
Page 95: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 85 MSI-Plessey Restore th e Default Val ue By reading the barcode, the parameter setup ofMSI-Plessey will be restored to the factory default state. Restore the Default Setup V a lue of M SI-Plesse y Allo w to Read MSI-Ples sey or not Allow to Read MSI-Plessey Prohibit Reading MSI-Plessey Note: the scanner wil[…]
-
Page 96: Newland NLS-HR1550-3E
【 S t art Setup 】 86 【 Exit Setup 】 No Check Single Check MOD10 Double Check MOD10/MOD10 Double Check MOD10/MOD1 1 Do not Send the Check Digit Send the Check D igit Note: by setting “do not send the check digit”, if the data length except for the 1 character check digit is less t han the minimum barcode reading limit, the barcode readin[…]
-
Page 97: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 87 Note ： the maximum l ength li mit of any 1D barcode must not exceed 255, if the maximum len gth is shorter t han the minimum le n gth, then the s canner is on ly able to read the barcodes w ith the minimum length and the the maximum leng th; if the maximum length equals to the minimum length, then the sc[…]
-
Page 98: Newland NLS-HR1550-3E
【 S t art Setup 】 88 【 Exit Setup 】 5. Read the “Exit Setup” barcode. PDF417 Restore th e Default Val ue By reading the barcode, the parameter setup of PDF417 will be restored to the factory default state. Restore the Default Setup V a lue of PDF417 Allo w to Read PDF417 or not Allow to Read PDF417 Prohibit Reading PDF417 Note: the scan[…]
-
Page 99: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 89 MicroPDF417 Restore th e Default Val ue By reading the barcode, the parameter setup of MicroPDF417 will be restored to the factory default sta te . Restore the Default Setup V alue of MicroPDF417 Allo w to Read MicroP DF417 or not Allow to Read MicroPDF417 Prohibit Reading MicroPDF417 Note: the scanne r wi[…]
-
Page 100: Newland NLS-HR1550-3E
【 S t art Setup 】 90 【 Exit Setup 】 Chapter 7 A ppendix Default Setup T able Parameters Default Setup Remark General Setup Setup Barcode Function On Send Setup Barcode Off Working Mode Manual Reading W ir eless Comminication Mode Asynchronized Mode Set the Barcode Reading T iem 15 Seconds Range: 0-15sec, 0 means non-stop Set the T ime Inter[…]
-
Page 101: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 91 Parameters Default Setup Remark Data Bits 8 bits USB Virtual Keyboard On Virtual Keyboard Layout The First, American English key board Delay between Characters 0ms 0~75ms Character Conversion No conversion Number Lockup Off Data Format Setup Setup of the Prefix sequence CodeID+Custom+AIMID CodeID+Prefix+(A[…]
-
Page 102: Newland NLS-HR1550-3E
【 S t art Setup 】 92 【 Exit Setup 】 Parameters Default Setup Remark Enable Off Minmum Length 1 EAN-8 Enable On Send the Check Character On Read 2-Digits Extracode Off Read 5-Digits Extracode Off Extracode is Required, 2-digits Off Extracode is Required, 5-digits Off Extend to EAN- 13 Off T y pe is EAN -13 when Ex tend Off EAN- 13 Enable On […]
-
Page 103: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 93 Parameters Default Setup Remark Use 10 digits ISBN Off UPC-E Enable On Send the Check Character On Read 2-Digits Extracode Off Read 5-Digits Extracode Off Extracode is Required, 2-digits Off Extracode is Required, 5-digits Off Extend to UPC-A Off T y pe is UPC-A when Extend Off Send the System Digit “0?[…]
-
Page 104: Newland NLS-HR1550-3E
【 S t art Setup 】 94 【 Exit Setup 】 Parameters Default Setup Remark Maximum Length 255 Minmum Length 6 ITF -6 Enable Off Send Check Character On ITF — 14 Enable Off Send Check Character On Deutshe 14 Enable Off Send Check Character On Deutshe 12 Enable Off Send Check Character On COOP25 (JapaneseMatrix 2 of 5) Enable Off Check Off Send Chec[…]
-
Page 105: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 95 Parameters Default Setup Remark Check Off Send Check Character Off Maximum Length 255 Minmum Length 6 At less 3 Industrial 25 Enable ? Check ? Send Check Character ? Maximum Length ? Minmum Length ? Standard 25 Enable On Check Off Send Check Character Off Maximum Length 255 Minmum Length 6 At less 4 Code 3[…]
-
Page 106: Newland NLS-HR1550-3E
【 S t art Setup 】 96 【 Exit Setup 】 Parameters Default Setup Remark Minmum Length 4 Codabar Enable On Check Off Send Check Character Off Do not Send S tart and S to p Character Off Se lect one ABCD/ABCD as the S tart and S top Character On ABCD/TN*E as the S tart and S top Character Off abcd/abcd as the S tart and S top Character Off abcd/t[…]
-
Page 107: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 97 Parameters Default Setup Remark Send Check Character On 1 Digit MOD10 Check On 2 Digits MO D10/ M OD10 Check Off 2 Digits MO D10/ M OD1 1 Check Off Auto 2 Digits MOD1 1/MOD1 1 Off Auto 2 Digits MOD1 1/MOD9 Off Maximum Length 255 Minmum Length 4 At less 3 Plessey Enable Off Check On Send Check Character Off[…]
-
Page 108: Newland NLS-HR1550-3E
【 S t art Setup 】 98 【 Exit Setup 】 Parameters Default Setup Remark GS1 Databar Enable On PDF417 Enable On MicroPDF417 Enable On[…]
-
Page 109: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 99 A IM ID T able Barcode AIM ID Possible AIM ID Parameters Code 128 ]C0 UCC/EAN- 128 ]C1 AIM 128 ]C2 ISBT 128 ]C4 EAN -8 ]E4 EAN — 13 ]E0 EAN -13 with Addon ]E3 ISSN ]X0 ISBN ]X0 UPC-E ]E0 UPC-E with Addon ]E3 UPC-A ]E0 UPC-A w ith Addon ]E3 Interleaved 2 of 5 ]Im 0,1,3 ITF-6 ]Im 1,3 ITF- 14 ]Im 1,3 Deutsche[…]
-
Page 110: Newland NLS-HR1550-3E
【 S t art Setup 】 100 【 Ex it Setup 】 Industrial 25 ]S0 S tandard 25 ]R0 Code 39 ]Am 0,1,3,4,5,7 Codabar ]Fm 0,2,4 Code 93 ]G0 Code 1 1 ]Hm 0,1,3 Plessey ]P0 MSI-Plessey ]Mm 0,1 GS1 Databar ]e0 PDF417 ]Lm 0,1,2 MicroPDF417 ]Lm 3,4,5 Reference: 1. ISO/IEC 15424:2008 2. Information T e chnology — Auto-Identification and Data Cellection T echn[…]
-
Page 111: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 101 CodeID T able 条码类型 Barcode Code ID Code 128 j UCC/EAN- 128 u AIM 128 f ISBT 128 t EAN -8 g EAN — 13 d ISSN n ISBN B UPC-E h UPC-A c Interleaved 2 of 5 e ITF-6 r ITF- 14 q Deutsche 14 w Deutsche 12 l COOP 25 （ Jap anese Matrix 2 of 5 ） o Matrix 2 of 5(European Matrix 2 of 5) v Industrial 25 i S[…]
-
Page 112: Newland NLS-HR1550-3E
【 S t art Setup 】 102 【 Ex it Setup 】 Code 93 y Code 1 1 z Plessey p MSI-Plessey m GS1 Databar R PDF417 P MicroPDF417 M Dat a Barcode After reading the data barcode, please read “save” in the next page to svae the data barcode setup. 0 4 1 5 2 6[…]
-
Page 113: Newland NLS-HR1550-3E
【 S tart Setup 】 【 Exit Setup 】 103 3 7 8 9 A B C D E F Save and A bort the Setup After reading the data barcod e, please read “save” to save the data. If re ading error occurs, e x cept for re -configuration, the costomer can also abort the error data. If the scanner has read a cent ain setup barcode, and read numeric data “1” ， […]
-
Page 114: Newland NLS-HR1550-3E
【 S t art Setup 】 104 【 Ex it Setup 】 Save Data Parameter Abort the Present Command Abort one of the Presnet Setup of the Dat a Parameter Abort one of the Presnet Setup of the Data Parameter[…]
Смотреть руководство для Newland NLS-HR1550-3E ниже. Все руководства на ManualsCat.com могут просматриваться абсолютно бесплатно. Нажав кнопку «Выбор языка» вы можете изменить язык руководства, которое хотите просмотреть.
MANUALSCAT | RU
Вопросы и ответы
У вас есть вопрос о Newland NLS-HR1550-3E, но вы не можете найти ответ в пользовательском руководстве? Возможно, пользователи ManualsCat.com смогут помочь вам и ответят на ваш вопрос. Заполните форму ниже — и ваш вопрос будет отображаться под руководством для Newland NLS-HR1550-3E. Пожалуйста, убедитесь, что вы опишите свои трудности с Newland NLS-HR1550-3E как можно более детально. Чем более детальным является ваш вопрос, тем более высоки шансы, что другой пользователь быстро ответит на него. Вам будет автоматически отправлено электронное письмо, чтобы проинформировать вас, когда кто-то из пользователей ответит на ваш вопрос.
Задать вопрос о Newland NLS-HR1550-3E
- Бренд:
- Newland
- Продукт:
- сканеры штрих-кода
- Модель/название:
- NLS-HR1550-3E
- Тип файла:
- Доступные языки:
- английский
Сопутствующие товары Newland NLS-HR1550-3E
Не готовы сразу приобрести банковский терминал?
Банковский терминал в аренду
Аренда
- 8325visibility
share
Руководство пользователя cканера Newland NLS-HR32
Это может быть интересно
more_vert
32450Тг
star_borderstar_borderstar_borderstar_borderstar_border
подробнее
more_vert
29700Тг
star_borderstar_borderstar_borderstar_borderstar_border
подробнее
more_vert
121000Тг
star_borderstar_borderstar_borderstar_borderstar_border
подробнее
more_vert
127500Тг
star_borderstar_borderstar_borderstar_borderstar_border
подробнее
more_vert
6050Тг
star_borderstar_borderstar_borderstar_borderstar_border
подробнее
more_vert
38500Тг
star_borderstar_borderstar_borderstar_borderstar_border
подробнее
User Guide
Hand-held Barcode Scanner
NLS-HR15
Fujian Newland Auto-ID Tech Co., Ltd.
Disclaimer
© 2013 Fujian Newland Auto-ID Tech. Co., Ltd. All rights reserved.
Please read through the manual carefully before using the product and operate it according to the manual. It is advised that you should keep this manual for future reference.
Do not disassemble the device or remove the seal label from the device. Otherwise, FuJian Newland Auto-ID Tech. Co., Ltd. does not assume responsibility for the warranty or replacement.
All pictures in this manual are for reference only and actual product may differ. Regarding to the product modification and update, FuJian Newland Auto-ID Tech. Co., Ltd. reserves the right to make changes to any software or product to improve reliability, function, or design at any time without notice. Besides, the information contained herein is subject to change without prior notice.
The products depicted in this manual may include software copyrighted by FuJian Newland Auto-ID Tech. Co., Ltd or a third party. The user, corporation or individual, shall not duplicate, in whole or in part, distribute, modify, decompile, disassemble, decode, reverse engineer, rent, transfer or sublicense such software without prior written consent from the copyright holders.
This manual is copyrighted. No part of this publication may be reproduced or used in any form without written permission from Newland.
FuJian Newland Auto-ID Tech. Co., Ltd. reserves the right to make final interpretation of the statement above.
FuJian Newland Auto-ID Tech. Co., Ltd.
3F, Building A, No.1, Rujiang Xi Rd., Mawei, Fuzhou, Fujian, P.R. China. 350015. http://www.nlscan.com
Revision History
|
Version |
Description |
Date |
|||
|
V1.0 |
Initial release. |
December 25, 2011 |
|||
|
V1.1 |
Corrected improper descriptions and moved the Enter/Exit Setup barcodes to page |
August 10, 2012 |
|||
|
header and footer. |
|||||
|
Updates: 1. Added the “Pairing Settings” section in Chapter 2; added the Timeout |
|||||
|
between Decodes (Same Barcode) programming feature for the Sense |
|||||
|
V1.2 |
and Continuous modes. |
February 28, 2013 |
|||
|
2. Added the “Improve Reliability of Communication between Cradle |
|||||
|
and PC” section in Chapter 4. |
|||||
|
3. Added PDF417 and MicroPDF417 sample barcodes in Chapter 6. |
|||||
|
Table of Contents |
|
|
Revision History……………………………………………………………………………………………………………………………………………….. |
— 3 — |
|
Preface …………………………………………………………………………………………………………………………………………………………………. |
1 |
|
Introduction ……………………………………………………………………………………………………………………………………………………. |
1 |
|
Chapter Description ………………………………………………………………………………………………………………………………………… |
1 |
|
Document Set ………………………………………………………………………………………………………………………………………………… |
2 |
|
Chapter 1 Getting Started ………………………………………………………………………………………………………………………………………. |
3 |
|
Introduction ……………………………………………………………………………………………………………………………………………………. |
3 |
|
Unpacking……………………………………………………………………………………………………………………………………………………… |
4 |
|
Scanner ………………………………………………………………………………………………………………………………………………………… |
4 |
|
CD15 Cradle ………………………………………………………………………………………………………………………………………………….. |
5 |
|
Communication Mode……………………………………………………………………………………………………………………………………… |
6 |
|
CD15 Data Port ……………………………………………………………………………………………………………………………………… |
7 |
|
USB/RS-232 Port …………………………………………………………………………………………………………………………………… |
8 |
|
Connect Cradle to a Host…………………………………………………………………………………………………………………………………. |
9 |
|
Use USB Cable ……………………………………………………………………………………………………………………………………… |
9 |
|
Use RS-232 Cable ……………………………………………………………………………………………………………………………….. |
10 |
|
Power on, Sleep, Power off, Reboot………………………………………………………………………………………………………………… |
11 |
|
Maintenance ………………………………………………………………………………………………………………………………………………… |
11 |
|
Depth of Field ………………………………………………………………………………………………………………………………………………. |
12 |
|
Specifications……………………………………………………………………………………………………………………………………………….. |
13 |
|
Dimensions of Scanner………………………………………………………………………………………………………………………………….. |
14 |
|
Side View ……………………………………………………………………………………………………………………………………………. |
14 |
|
Front View …………………………………………………………………………………………………………………………………………… |
14 |
|
Top View……………………………………………………………………………………………………………………………………………… |
15 |
|
Dimensions of CD15 Cradle …………………………………………………………………………………………………………………………… |
15 |
|
Scanning Instructions ……………………………………………………………………………………………………………………………………. |
16 |
|
Chapter 2 General Settings ………………………………………………………………………………………………………………………………….. |
18 |
|
Introduction ………………………………………………………………………………………………………………………………………………….. |
18 |
|
Barcode Programming ………………………………………………………………………………………………………………………….. |
18 |
|
Command Programming ……………………………………………………………………………………………………………………….. |
18 |
|
Programming Barcode/ Programming Command/Function …………………………………………………………………………………. |
19 |
|
Use of Programming Barcodes……………………………………………………………………………………………………………………….. |
19 |
|
Use of Command………………………………………………………………………………………………………………………………………….. |
20 |
|
Programming Mode………………………………………………………………………………………………………………………………. |
20 |
|
Format of Command …………………………………………………………………………………………………………………………….. |
20 |
|
Configuration Process Flow …………………………………………………………………………………………………………………… |
22 |
|
Default Settings ……………………………………………………………………………………………………………………………………………. |
23 |
|
Restore Factory Default Settings ……………………………………………………………………………………………………………. |
23 |
|
Pairing Settings…………………………………………………………………………………………………………………………………………….. |
24 |
|
Pair Scanner with Cradle……………………………………………………………………………………………………………………….. |
24 |
|
Pair Cradle with Zigbee Router ………………………………………………………………………………………………………………. |
24 |
|
Clear Pairing Settings……………………………………………………………………………………………………………………………. |
24 |
|
Operating Mode Options………………………………………………………………………………………………………………………………… |
25 |
|
Power-Off Timeout ………………………………………………………………………………………………………………………………………… |
26 |
|
Scan Mode…………………………………………………………………………………………………………………………………………………… |
27 |
|
Manual Mode ………………………………………………………………………………………………………………………………………. |
27 |
|
Auto Mode…………………………………………………………………………………………………………………………………………… |
28 |
|
Blink Mode ………………………………………………………………………………………………………………………………………….. |
30 |
|
Sense Mode ………………………………………………………………………………………………………………………………………… |
31 |
|
Continuous Mode …………………………………………………………………………………………………………………………………. |
34 |
|
Delayed Sense Mode ……………………………………………………………………………………………………………………………. |
36 |
|
Security Setup ……………………………………………………………………………………………………………………………………………… |
37 |
|
Decode Beep ……………………………………………………………………………………………………………………………………………….. |
38 |
|
Decode Area and Output Interval…………………………………………………………………………………………………………………….. |
40 |
|
Other Settings………………………………………………………………………………………………………………………………………………. |
41 |
|
Temporary Mute …………………………………………………………………………………………………………………………………… |
41 |
|
Chapter 3 Inquiry Command ……………………………………………………………………………………………………………………………….. |
42 |
|
Introduction ………………………………………………………………………………………………………………………………………………….. |
42 |
|
Obtain Scanner Information ……………………………………………………………………………………………………………………………. |
42 |
|
Obtain Cradle Information………………………………………………………………………………………………………………………………. |
43 |
|
Obtain Wireless Module Information………………………………………………………………………………………………………………… |
44 |
|
Chapter 4 Communication Settings………………………………………………………………………………………………………………………. |
45 |
|
Introduction ………………………………………………………………………………………………………………………………………………….. |
45 |
|
Wireless Communication Setup………………………………………………………………………………………………………………………. |
45 |
|
RS-232 Interface…………………………………………………………………………………………………………………………………………… |
46 |
|
Baud Rate …………………………………………………………………………………………………………………………………………… |
46 |
|
Parity Check………………………………………………………………………………………………………………………………………… |
47 |
|
Stop Bit……………………………………………………………………………………………………………………………………………….. |
47 |
|
Flow Control ………………………………………………………………………………………………………………………………………… |
48 |
|
Data Bit ………………………………………………………………………………………………………………………………………………. |
49 |
|
USB Interface ………………………………………………………………………………………………………………………………………………. |
50 |
|
USB HID-KBW …………………………………………………………………………………………………………………………………….. |
50 |
|
USB COM Port Emulation ……………………………………………………………………………………………………………………… |
50 |
|
Keyboard Parameters……………………………………………………………………………………………………………………………………. |
51 |
|
Keyboard Layout ………………………………………………………………………………………………………………………………….. |
51 |
|
Inter-Character Delay……………………………………………………………………………………………………………………………. |
52 |
|
Convert Case ………………………………………………………………………………………………………………………………………. |
52 |
|
Improve Reliability of Communication between Cradle and PC……………………………………………………………………………. |
53 |
|
Enable Communication Support……………………………………………………………………………………………………………… |
53 |
|
Disable Communication Support…………………………………………………………………………………………………………….. |
53 |
|
Chapter 5 Data Formatting …………………………………………………………………………………………………………………………………… |
54 |
|
Introduction ………………………………………………………………………………………………………………………………………………….. |
54 |
|
Prefix Sequence …………………………………………………………………………………………………………………………………………… |
54 |
|
Custom Prefix ………………………………………………………………………………………………………………………………………………. |
55 |
|
Enable/Disable Custom Prefix………………………………………………………………………………………………………………… |
55 |
|
Set Custom Prefix ………………………………………………………………………………………………………………………………… |
55 |
|
AIM ID Prefix………………………………………………………………………………………………………………………………………………… |
56 |
|
Code ID Prefix ……………………………………………………………………………………………………………………………………………… |
56 |
|
Custom Suffix ………………………………………………………………………………………………………………………………………………. |
57 |
|
Enable/Disable Custom Suffix………………………………………………………………………………………………………………… |
57 |
|
Set Custom Suffix…………………………………………………………………………………………………………………………………. |
57 |
|
Terminating Character Suffix…………………………………………………………………………………………………………………………… |
58 |
|
Enable/Disable Terminating Character Suffix ……………………………………………………………………………………………. |
58 |
|
Set Terminating Character Suffix…………………………………………………………………………………………………………….. |
59 |
|
Chapter 6 Symbologies ……………………………………………………………………………………………………………………………………….. |
60 |
|
Introduction ………………………………………………………………………………………………………………………………………………….. |
60 |
|
Code 128 …………………………………………………………………………………………………………………………………………………….. |
60 |
|
Restore Default Settings ……………………………………………………………………………………………………………………….. |
60 |
|
Enable/Disable Code 128………………………………………………………………………………………………………………………. |
60 |
|
Set Code ID…………………………………………………………………………………………………………………………………………. |
61 |
|
Set Length Range for Code 128……………………………………………………………………………………………………………… |
62 |
|
UCC/EAN-128 ……………………………………………………………………………………………………………………………………………… |
63 |
|
Restore Default Settings ……………………………………………………………………………………………………………………….. |
63 |
|
Enable/Disable UCC/EAN-128……………………………………………………………………………………………………………….. |
63 |
|
Set Code ID…………………………………………………………………………………………………………………………………………. |
64 |
|
Set Length Range for UCC/EAN-128 ………………………………………………………………………………………………………. |
65 |
|
AIM 128 ………………………………………………………………………………………………………………………………………………………. |
66 |
|
Restore Default Settings ……………………………………………………………………………………………………………………….. |
66 |
|
Enable/Disable AIM 128 ………………………………………………………………………………………………………………………… |
66 |
|
Set Code ID…………………………………………………………………………………………………………………………………………. |
67 |
|
Set Length Range for AIM 128 ……………………………………………………………………………………………………………….. |
68 |
|
EAN-8 …………………………………………………………………………………………………………………………………………………………. |
69 |
|
Restore Default Settings ……………………………………………………………………………………………………………………….. |
69 |
|
Enable/Disable EAN-8…………………………………………………………………………………………………………………………… |
69 |
|
Set Code ID…………………………………………………………………………………………………………………………………………. |
70 |
|
2-Digit Add-On Code …………………………………………………………………………………………………………………………….. |
71 |
|
5-Digit Add-On Code …………………………………………………………………………………………………………………………….. |
72 |
|
EAN-8 Extension………………………………………………………………………………………………………………………………….. |
73 |
|
Transmit Check Digit …………………………………………………………………………………………………………………………….. |
73 |
|
EAN-13 ……………………………………………………………………………………………………………………………………………………….. |
74 |
|
Restore Default Settings ……………………………………………………………………………………………………………………….. |
74 |
|
Enable/Disable EAN-13…………………………………………………………………………………………………………………………. |
74 |
|
Transmit Check Digit …………………………………………………………………………………………………………………………….. |
75 |
|
Set Code ID…………………………………………………………………………………………………………………………………………. |
75 |
|
2-Digit Add-On Code …………………………………………………………………………………………………………………………….. |
76 |
|
5-Digit Add-On Code …………………………………………………………………………………………………………………………….. |
77 |
|
ISSN …………………………………………………………………………………………………………………………………………………………… |
78 |
|
Restore Default Settings ……………………………………………………………………………………………………………………….. |
78 |
|
Enable/Disable ISSN…………………………………………………………………………………………………………………………….. |
78 |
|
Set Code ID…………………………………………………………………………………………………………………………………………. |
79 |
|
ISBN …………………………………………………………………………………………………………………………………………………………… |
80 |
|
Restore Default Settings ……………………………………………………………………………………………………………………….. |
80 |
|
Enable/Disable ISBN…………………………………………………………………………………………………………………………….. |
80 |
|
Set ISBN Format ………………………………………………………………………………………………………………………………….. |
81 |
|
Set Code ID…………………………………………………………………………………………………………………………………………. |
81 |
|
UPC-E ………………………………………………………………………………………………………………………………………………………… |
82 |
|
Restore Default Settings ……………………………………………………………………………………………………………………….. |
82 |
|
Enable/Disable UPC-E ………………………………………………………………………………………………………………………….. |
82 |
|
Transmit Check Digit …………………………………………………………………………………………………………………………….. |
83 |
|
Set Code ID…………………………………………………………………………………………………………………………………………. |
83 |
|
2-Digit Add-On Code …………………………………………………………………………………………………………………………….. |
84 |
|
5-Digit Add-On Code …………………………………………………………………………………………………………………………….. |
85 |
|
Transmit System Character “0” ………………………………………………………………………………………………………………. |
86 |
|
UPC-E Extension …………………………………………………………………………………………………………………………………. |
86 |
|
UPC-A ………………………………………………………………………………………………………………………………………………………… |
87 |
|
Restore Default Settings ……………………………………………………………………………………………………………………….. |
87 |
|
Enable/Disable UPC-A ………………………………………………………………………………………………………………………….. |
87 |
|
Set Code ID…………………………………………………………………………………………………………………………………………. |
88 |
|
Transmit Check Digit …………………………………………………………………………………………………………………………….. |
89 |
|
Transmit Preamble Character “0” ……………………………………………………………………………………………………………. |
89 |
|
2-Digit Add-On Code …………………………………………………………………………………………………………………………….. |
90 |
|
5-Digit Add-On Code …………………………………………………………………………………………………………………………….. |
91 |
|
Interleaved 2 of 5 ………………………………………………………………………………………………………………………………………….. |
92 |
|
Restore Default Settings ……………………………………………………………………………………………………………………….. |
92 |
|
Enable/Disable Interleaved 2 of 5 …………………………………………………………………………………………………………… |
92 |
|
Set Code ID…………………………………………………………………………………………………………………………………………. |
93 |
|
Parity Check………………………………………………………………………………………………………………………………………… |
94 |
|
Set Length Range for Interleaved 2 of 5…………………………………………………………………………………………………… |
95 |
|
ITF-6 …………………………………………………………………………………………………………………………………………………………… |
96 |
|
Set Code ID…………………………………………………………………………………………………………………………………………. |
97 |
|
ITF-14 …………………………………………………………………………………………………………………………………………………………. |
98 |
|
Set Code ID…………………………………………………………………………………………………………………………………………. |
99 |
|
Deutsche 14……………………………………………………………………………………………………………………………………………….. |
100 |
|
Restore Default Settings ……………………………………………………………………………………………………………………… |
100 |
|
Enable/Disable Deutsche14 …………………………………………………………………………………………………………………. |
100 |
|
Set Code ID……………………………………………………………………………………………………………………………………….. |
101 |
|
Deutsche 12……………………………………………………………………………………………………………………………………………….. |
102 |
|
Restore Default Settings ……………………………………………………………………………………………………………………… |
102 |
|
Enable/Disable Deutsche 12 ………………………………………………………………………………………………………………… |
102 |
|
Set Code ID……………………………………………………………………………………………………………………………………….. |
103 |
|
COOP 25 (Japanese Matrix 2 of 5)………………………………………………………………………………………………………………… |
104 |
|
Restore Default Settings ……………………………………………………………………………………………………………………… |
104 |
|
Enable/Disable COOP 25…………………………………………………………………………………………………………………….. |
104 |
|
Set Code ID……………………………………………………………………………………………………………………………………….. |
105 |
|
Parity Check………………………………………………………………………………………………………………………………………. |
106 |
|
Set Length Range for COOP 25……………………………………………………………………………………………………………. |
107 |
|
Matrix 2 of 5 (European Matrix 2 of 5) ……………………………………………………………………………………………………………. |
108 |
|
Restore Default Settings ……………………………………………………………………………………………………………………… |
108 |
|
Enable/Disable Matrix 2 of 5 ………………………………………………………………………………………………………………… |
108 |
|
Set Code ID……………………………………………………………………………………………………………………………………….. |
109 |
|
Parity Check………………………………………………………………………………………………………………………………………. |
110 |
|
Set Length Range for Matrix 2 of 5 ……………………………………………………………………………………………………….. |
111 |
|
Industrial 25 ……………………………………………………………………………………………………………………………………………….. |
112 |
|
Restore Default Settings ……………………………………………………………………………………………………………………… |
112 |
|
Enable/Disable Industrial 25…………………………………………………………………………………………………………………. |
112 |
|
Set Code ID……………………………………………………………………………………………………………………………………….. |
113 |
|
Parity Check………………………………………………………………………………………………………………………………………. |
114 |
|
Set Length Range for Industrial 25………………………………………………………………………………………………………… |
115 |
|
Standard 25 ……………………………………………………………………………………………………………………………………………….. |
116 |
|
Restore Default Settings ……………………………………………………………………………………………………………………… |
116 |
|
Enable/Disable Standard 25…………………………………………………………………………………………………………………. |
116 |
|
Set Code ID……………………………………………………………………………………………………………………………………….. |
117 |
|
Parity Check………………………………………………………………………………………………………………………………………. |
118 |
|
Set Length Range for Standard 25………………………………………………………………………………………………………… |
119 |
|
Code 39 …………………………………………………………………………………………………………………………………………………….. |
120 |
|
Restore Default Settings ……………………………………………………………………………………………………………………… |
120 |
|
Enable/Disable Code 39………………………………………………………………………………………………………………………. |
120 |
|
Set Code ID……………………………………………………………………………………………………………………………………….. |
121 |
|
Parity Check………………………………………………………………………………………………………………………………………. |
122 |
|
Transmit Start/Stop Character ………………………………………………………………………………………………………………. |
123 |
|
Enable/Disable Code 39 Full ASCII……………………………………………………………………………………………………….. |
123 |
|
Set Length Range for Code 39……………………………………………………………………………………………………………… |
124 |
|
Codabar …………………………………………………………………………………………………………………………………………………….. |
125 |
|
Restore Default Settings ……………………………………………………………………………………………………………………… |
125 |
|
Enable/Disable Codabar ……………………………………………………………………………………………………………………… |
125 |
|
Set Code ID……………………………………………………………………………………………………………………………………….. |
126 |
|
Parity Check………………………………………………………………………………………………………………………………………. |
127 |
|
Start/Stop Character ……………………………………………………………………………………………………………………………. |
128 |
|
Set Length Range for Codabar …………………………………………………………………………………………………………….. |
129 |
|
Code 93 …………………………………………………………………………………………………………………………………………………….. |
130 |
|
Restore Default Settings ……………………………………………………………………………………………………………………… |
130 |
|
Enable/Disable Code 93………………………………………………………………………………………………………………………. |
130 |
|
Set Code ID……………………………………………………………………………………………………………………………………….. |
131 |
|
Parity Check………………………………………………………………………………………………………………………………………. |
132 |
|
Set Length Range for Code 93……………………………………………………………………………………………………………… |
133 |
|
Code 11 …………………………………………………………………………………………………………………………………………………….. |
134 |
|
Restore Default Settings ……………………………………………………………………………………………………………………… |
134 |
|
Enable/Disable Code 11………………………………………………………………………………………………………………………. |
134 |
|
Set Code ID……………………………………………………………………………………………………………………………………….. |
135 |
|
Parity Check………………………………………………………………………………………………………………………………………. |
136 |
|
Set Length Range for Code 11……………………………………………………………………………………………………………… |
137 |
|
Plessey ……………………………………………………………………………………………………………………………………………………… |
138 |
|
Restore Default Settings ……………………………………………………………………………………………………………………… |
138 |
|
Enable/Disable Plessey……………………………………………………………………………………………………………………….. |
138 |
|
Set Code ID……………………………………………………………………………………………………………………………………….. |
139 |
|
Parity Check………………………………………………………………………………………………………………………………………. |
140 |
|
Set Length Range for Plessey………………………………………………………………………………………………………………. |
141 |
|
MSI-Plessey……………………………………………………………………………………………………………………………………………….. |
142 |
|
Restore Default Settings ……………………………………………………………………………………………………………………… |
142 |
|
Enable/Disable MSI-Plessey ………………………………………………………………………………………………………………… |
142 |
|
Set Code ID……………………………………………………………………………………………………………………………………….. |
143 |
|
Parity Check………………………………………………………………………………………………………………………………………. |
144 |
|
Set Length Range for MSI-Plessey ……………………………………………………………………………………………………….. |
145 |
|
GS1 Databar………………………………………………………………………………………………………………………………………………. |
146 |
|
Restore Default Settings ……………………………………………………………………………………………………………………… |
146 |
|
Enable/Disable GS1 Databar ……………………………………………………………………………………………………………….. |
146 |
|
Set Code ID……………………………………………………………………………………………………………………………………….. |
147 |
|
PDF417……………………………………………………………………………………………………………………………………………………… |
148 |
|
Restore Default Settings ……………………………………………………………………………………………………………………… |
148 |
|
Enable/Disable PDF417 ………………………………………………………………………………………………………………………. |
148 |
|
Set Code ID……………………………………………………………………………………………………………………………………….. |
149 |
|
Set Length Range for PDF417 ……………………………………………………………………………………………………………… |
150 |
|
Sample Barcodes……………………………………………………………………………………………………………………………….. |
151 |
|
MicroPDF417……………………………………………………………………………………………………………………………………………… |
153 |
|
Restore Default Settings ……………………………………………………………………………………………………………………… |
153 |
|
Enable/Disable MicroPDF417 ………………………………………………………………………………………………………………. |
153 |
|
Set Code ID……………………………………………………………………………………………………………………………………….. |
154 |
|
Set Length Range for MicroPDF417 ……………………………………………………………………………………………………… |
155 |
|
Sample Barcodes……………………………………………………………………………………………………………………………….. |
156 |
|
Chapter 7 Appendix……………………………………………………………………………………………………………………………………………. |
158 |
|
Default Parameters Table …………………………………………………………………………………………………………………………….. |
158 |
|
AIM ID Table ………………………………………………………………………………………………………………………………………………. |
164 |
|
Code ID Table …………………………………………………………………………………………………………………………………………….. |
166 |
|
Digit Barcodes ……………………………………………………………………………………………………………………………………………. |
167 |
|
Save/Cancel Barcodes ………………………………………………………………………………………………………………………………… |
169 |
Preface
Introduction
This manual provides detailed instructions for setting up and using the NLS-HR15 series cordless 1D barcode scanner NLS-HR1550-3E (hereinafter referred to as “NLS-HR15 Hand-held Barcode Scanner” or “the scanner”).
Chapter Description
|
Chapter 1,Getting Started |
: This chapter gives a general description of NLS-HR15 Hand-held |
|
Barcode Scanner including its technical parameters. |
|
|
Chapter 2, General Settings |
: This chapter introduces two methods to configure the NLS-HR15 Hand- |
|
held Barcode Scanner: barcode programming and command |
|
|
programming. |
|
|
Chapter 3, Inquiry Command |
: This chapter describes how to obtain the information of NLS-HR15 Hand- |
|
held Barcode Scanner by scanning programming barcodes. |
Chapter 4, Communication Settings : This chapter describes how to configure communication modes, serial
|
port parameters and USB function. |
||
|
Chapter 5, Data Formatting |
: This chapter describes how to use prefix and suffix to customize scanned |
|
|
data. |
||
|
Chapter 6, Symbologies |
: This chapter lists all compatible symbologies and describes how to |
|
|
configure the relevant parameters. |
||
|
Chapter 7 Appendix |
: This chapter offers default parameters tables and a bunch of frequently |
|
|
used programming barcodes. |
1
Document Set
The documentation set for the NLS-NLS-HR15 Hand-held Barcode Scanner provides information for specific user needs
and includes:
|
NLS-HR1550-3E Quick Start Guide |
Describes how to get the NLS-HR15 Hand-held Barcode |
|
Scanner up and running, and introduces some basic operations. |
|
|
NLS-HR1550-3E User Guide |
Describes how to use and set the NLS-HR15 Hand-held |
|
Barcode Scanner. |
|
|
1D Barcode Scanner Firmware Update Utility |
Describes how to update the firmware in 1D barcode scanners |
|
User Guide |
with this tool developed by Newland. |
|
EzSet123 Scanner Configuration Utility User |
Describes how to configure scanners with this tool developed by |
|
Guide |
Newland. |
|
NLS-HR15 Hand-held Barcode Scanner-PC |
Describes how to use this tool we designed to improve the |
|
Communication Support Tool User Guide |
reliability of communication between NLS-HR15 Hand-held |
|
Barcode Scanner and PC. |
2
** Enter Setup
Chapter 1 Getting Started
Introduction
NLS-HR15 Hand-held Barcode Scanner is a 1D barcode scanner with excellent performance. Besides all common 1D
symbologies, it can also read 2D stacked symbologies such as PDF417 and MicroPDF417. Based on the 
technology independently developed by Newland, NLS-HR15 Hand-held Barcode Scanner is able to deliver rapid image acquisition and accurate decoding; it can provide customers with best services. NLS-HR15 Hand-held Barcode Scanner boasts the ergonomical design that ensures easy and comfortable operation.
An illustrated introduction to the NLS-HR15 Hand-held Barcode Scanner is included in this chapter. If you have an HR15 device at hand, make good use of it to develop a better understanding of this manual. This chapter is written for normal users, maintenance staff and software developers.
** Enter Setup
Unpacking
Open the package and take out NLS-HR15 Hand-held Barcode Scanner and its accessories. Check to make sure everything on the packing list is present and intact. If any contents are damaged or missing, please keep the original package and contact your dealer immediately for after-sale service.
*Note: CD15, the cradle of NLS-HR15 Hand-held Barcode Scanner is individually wrapped.
Scanner
Decode/Transmission LED Definitions:
Green Flash : Barcode decoded successfully.
Battery is fully charged.
Blue Flash : Zigbee is available.
Red Flash : Data transmission failed.
Device is charging.
Purple Flash: Firmware update is in progress.
There is data in FLASH memory.
Fig. 1-1
** Enter Setup
CD15 Cradle
Buttons:
P Batch Transmission
M Pair/Search
LEDs:
Zigbee LED (blue):
Zigbee is available.
Battery LED (green):
Indicates battery level (four levels)
Fig. 1-2
** Enter Setup
Fig. 1-3
Communication Mode
There are three communication modes: synchronous mode (default), asynchronous mode and batch mode.
Synchronous mode:
If Zigbee is available, scanned data will be transferred to the cradle immediately after successfully decoded; if Zigbee is unavailable, the transmission of decoded data cannot be accomplished.
Asynchronous mode:
If Zigbee is available, scanned data will be transferred to the cradle immediately after successfully decoded; if Zigbee is unavailable, the decoded data will be first stored in the flash memory in a FIFO (first in first out) manner, and be sent automatically to the cradle when Zigbee becomes available.
Batch mode:
Whether Zigbee is available or not, the decoded data will be stored in the flash memory. To send the stored data to the cradle, you need to insert the scanner in the cradle and then press “P” button (see Fig.1-2) on the cradle.
** Enter Setup
CD15 Data Port
Pinout of CD15 data port
|
PIN |
Definition |
Type |
Description |
||
|
1 |
NC |
— |
No connection |
||
|
2 |
NC |
— |
No connection |
||
|
3 |
VCC |
P |
Power+ (+5V) |
||
|
4 |
TXD |
O |
RS-232 output |
||
|
5 |
RXD |
I |
RS-232 input |
||
|
6 |
CTS |
I |
|||
|
Flow control signal |
|||||
|
7 |
RTS |
O |
|||
|
8 |
GND |
P |
Ground |
||
|
9 |
D- |
I/O |
|||
|
USB signal |
|||||
|
10 |
D+ |
I/O |
|||
** Enter Setup
USB/RS-232 Port
CD15 cradle must be connected to a Host in actual application, such as PC, POS or any intelligent terminal with USB or RS-232 port, via a communication cable, either USB or RS-232 cable.
USB
USB port on the Host
RS-232
RS-232 port on the Host
Note: Please check the port on the Host and purchase the right cable.
** Enter Setup
Connect Cradle to a Host
Use USB Cable
Fig. 1-6
Connect the CD15 cradle to a Host through a USB cable with RJ45 and USB connectors:
1.Plug the RJ45 connector into the data port (see Fig.1-3) on CD15 cradle.
2.Plug the USB connector into the USB port on the Host.
** Enter Setup
Use RS-232 Cable
Fig. 1-7
Connect the CD15 cradle to a Host through a RS-232 cable with RJ45 and RS-232 connectors:
1.Plug the RJ45 connector into the data port (see Fig.1-3) on CD15 cradle.
2.Plug the RS-232 connector into the RS-232 port on the Host.
3.Plug the supplied power adapter into the power port (see Fig.1-3) on CD15 cradle.
** Enter Setup
Power on, Sleep, Power off, Reboot
Powering on the device
Hold down the trigger on the scanner for 1 second or longer.
Note: When using the scanner for the first time, the user MUST hold down the trigger for 10-15 seconds to exit battery protection mode and activate the scanner. The scanner emits several beeps to indicate success.
Entering the sleep mode
If the scanner is in the Manual mode, when no operation is performed on the device for 5 seconds, the scanner will automatically enter the sleep state.
Powering off the device
Scan the Power Off barcode. (see the “Operating Mode Options” section in Chapter 2)
Note: If the scanner is in the Manual mode, when no operation is performed on the device for a specific time period (default: 5 minutes, programmable), the scanner will be automatically turned off. (To change the time period, see the “Power-off Timeout” section in Chapter 2).
Rebooting the device
If the HR15 stops responding to input or runs abnormally, press the Reset button on the scanner to reboot it.
Maintenance
The scan window should be kept clean.
Do not scratch the scan window of the device.
Use soft brush to remove the stain from the scan window.
Use the soft cloth to clean the window, such as eyeglass cleaning cloth.
Do not spray any liquid on the scan window.
Clean other parts of the device with water only.
Note: The warranty DOES NOT cover damages caused by inappropriate care and maintenance.
** Enter Setup
Depth of Field
Fig. 1-8
** Enter Setup
Specifications
Performance
|
Light Source |
620nm visible red LED |
|||
|
Image Sensor |
CCD linear image sensor |
|||
|
Symbologies |
Code128, EAN-13, EAN-8, Code 39,UPC-A, UPC-E, Codabar, Interleaved 2 of 5, |
|||
|
ISBN, Code 93, UCC/EAN-128, GS1 Databar, PDF417 (max. 255 bytes), |
||||
|
MicroPDF417 (max. 255 bytes), etc. |
||||
|
Resolution |
≥ 4mil |
|||
|
Pitch |
±55° |
|||
|
Scan Angle** |
Roll |
±30° |
||
|
Skew |
±75° |
|||
|
Minimum Symbol Contrast |
30% |
|||
|
Scan Rate |
300 scans per second |
|||
|
Interface |
RS-232, USB 1.1 |
|||
|
Physical |
||||
|
Dimensions of Scanner(L x W x H) |
113.5 x 73 x 159 mm |
|||
|
Dimensions of Cradle(L x W x H) |
195 x 82.5 x 47 mm |
|||
|
Weight of Scanner |
210 g (including battery) |
|||
|
Weight of Cradle |
150 g |
|||
|
Indication |
Beep and LED |
|||
|
Power Adaptor |
Output: DC5V, 1.5A, Input: AC100~240V, 50~60Hz |
|||
|
Environmental |
||||
|
Operating Temperature |
-10°C to 50°C (14°F to 122°F) |
|||
|
Storage Temperature |
-20°C to 60°C (-4°F to 140°F) |
|||
|
Humidity |
5% ~ 95% (non-condensing) |
|||
|
ESD |
±8 kV contact discharge; ±12 kV air discharge |
|||
|
IP Seal |
IP54 |
|||
|
Wireless Connectivity |
||||
|
Communication Mode |
Synchronous, Asynchronous and Batch modes |
|||
|
Wireless Technology |
2.4 ~ 2.4835 GHz ISM band, Zigbee technology |
|||
|
Communication Distance |
50 m |
|||
|
Data Rate |
20 KBps |
|||
|
Battery |
2200mAh Li-ion Battery |
|||
|
Working Time |
>17 hours |
|||
|
Charging Time |
Around 4 hours for full charge |
|||
|
Number of Scans |
60,000 scans per charge |
|||
|
Certifications |
||||
|
FCC Part15 Class B, CE EMC Class B |
||||
** Enter Setup
**Test conditions: Code 39, 3 Bytes; Narrow Space=10mil; Width:Narrow=2.5:1; PCS=0.8; Barcode Height=40mm; Scan Distance=210mm, Ambient Temperature=23 , Illumination= 200 LUX
Dimensions of Scanner
Side View
Fig. 1-9
Front View
Fig. 1-10
** Enter Setup
Top View
Fig. 1-11
Dimensions of CD15 Cradle
Fig. 1-12
** Enter Setup
Scanning Instructions
When the NLS-HR15 Hand-held Barcode Scanner is in the Manual mode (default), you can follow the steps below to scan
abarcode:
1.Hold down the trigger. Then the scanner will project a red aiming beam.
2.Aim the red beam across the center of barcode, as shown in Fig.1-13.
3.Release the trigger when the scanner beeps and the red beam goes off. If the barcode is decoded successfully, the data will be sent to the Host.
Note: For the same batch of barcodes, the scanner will keep a very high success ratio in certain distance which can be regarded as the optimal scanning distance.
Fig. 1-13
** Enter Setup
Scan Angle
The scanner is designed to function within a certain range of scan angles. Any unreasonable deviation may cause decoding failure.
Scan angles of the HR15:
Pitch ±55°, 0° Roll and 0° Skew (Fig. 1-14)
Roll ±30°, 0° Pitch and 0° Skew (Fig. 1-15)
Skew ±75°, 0° Roll and 0° Pitch (Fig. 1-16)
Fig. 1-15
Fig. 1-14
Fig. 1-16
** Enter Setup
Chapter 2 General Settings
Introduction
There are two ways to configure the NLS-HR15 Hand-held Barcode Scanner: barcode programming and command programming.
Barcode Programming
The NLS-HR15 Hand-held Barcode Scanner scans a series of barcodes to program features. In the following sections, we will explain the available options and features and provide the barcodes to program them.
This programming method is most straightforward. However, it requires manually scanning barcodes. As a result, errors are more likely to occur.
Command Programming
You can send the command strings through the Host to your scanner to perform configuration. In the following sections, the commands will be provided along with programming barcodes.
This configuration can also be performed through our software. For more information, see the “EzSet123 Scanner Configuration Utility User Guide”.
Note: All settings except temporary ones are stored in non-volatile memory of the scanner and will not be lost by removing power from the scanner, or turning off/ rebooting the device.
** Enter Setup
Programming Barcode/ Programming Command/Function
1
2
The figure above is an example that shows you the programming barcode and command for the Enter Setup function:
1.The Enter Setup barcode.
2.The Enter Setup command.
3.The function that can be enabled by using the programming barcode or command listed above.
4.** incidates factory default settings.
Use of Programming Barcodes
Scanning the Enter Setup barcode can enable the scanner to enter the setup mode. Then you can scan a number of programming barcodes to configure your scanner.
The NLS-HR15 Hand-held Barcode Scanner is in the setup mode by default. In real application, programming barcodes hardly overlap with non-programming barcodes, so it is unnecessary to exit the setup mode each time you finish the configuration.
Some functions or options may involve parameter value settings that require scanning numeric barcodes. To find the numeric barcodes, see the “Digit Barcodes” section in Chapter 7.
** Enter Setup
Use of Command
Based on serial port communication, programming commands can be composed of printable ASCII characters, 0x20 (space) through 0x7D (“}”).
Programming Mode
Before configuring the NLS-HR15 Hand-held Barcode Scanner through serial communication, the device must enter the programming mode; in such mode, the device will only accept and process commands and respond accordingly.
You can enable the device to enter or exit the programming mode by sending the specified commands to it. In the event that the device receives no data for 5 seconds, it will exit the programming mode automatically.
Format of Command
1.Enter the programming mode: send “$$$$” from the Host to the scanner, the scanner returns a reply of “@@@@” to indicate success.
2.Exit the programming mode: send “%%%%” from the Host to the scanner, the scanner returns a reply of “^^^^” to indicate success.
3.Receiving “^^^^” from the scanner when the Host did not send “%%%%” to it indicates the scanner has automatically exit the setup mode.
4.A command string consists of “#”, programming command and “;”, such as “#99900030;”.
5.If a command string is properly processed, the scanner will return a reply consisting of “!”, programming command and “;”, such as “!99900030;”.
6.If the scanner receives an invalid command string or fails to process a command string, it will return a reply consisting of “?”, programming command and “;”, such as “?99900030;”
7.If a query command is properly processed, the scanner will return a reply containing “!”, programming command and “;”, as well as «&{«, query result and «}«. For example:
send a query command of “#99900301;” to get the firmware version information,
the Host will receive a reply of “!99900301;&{Firmware v1.7.5;Decoder v1.00.023.C6;|FD25430B}”. Description:
In the reply, “Firmware v1.7.5;Decoder v1.00.023.C6” is the query result; “|” is a separator; and “FD25430B” is the CRC32 checksum value in hexadecimal format.
** Enter Setup
8. If a command involves parameter(s), they shall be combined as per the rule.
For example: The combined commands for appending terminating character suffix 0x0D (CR),0x0A (LF) to the scanned data and saving the settings:
“#99904112;#99900000;#99900015;#99900000;#99900012;#99900020;”.
** Enter Setup
Configuration Process Flow
** Enter Setup
Default Settings
Restore Factory Default Settings
Scanning the Reset Scanner barcode/the Reset Cradle barcode can restore the scanner/cradle to the factory default settings.
You may need to reset your scanner/cradle when:
1.scanner/cradle is not properly configured so that it fails to decode barcodes or to communicate with cradle;
2.you forget previous configuration and want to avoid its impact;
3.functions that are rarely used have been enabled for the time being.
Reset Scanner
Reset Cradle
** Enter Setup
Pairing Settings
Pair Scanner with Cradle
The scanner and cradle must be paired for communication to occur. A cradle can be paired with multiple scanners.
You need to perform this operation manually: After the scanner and cradle are powered on, insert the scanner in the cradle and then press the “M” button on the cradle.
Note: The number of scanners allowed to pair with a cradle varies from one application to another. Consult our technical support if you need more information.
Pair Cradle with Zigbee Router
A CD15 cradle with its DIP switch (see Fig. 1-3) in the “R” position can function as a Zigbee router. You can extend communication distance of the cradle by pairing multiple Zigbee routers with it.
Follow the procedure below to pair a cradle with a Zigbee router: a. Pair a scanner with the cradle; b. Insert the scanner in the Zigbee router and then press the “M” button on the router.
A CD15 cradle with its DIP switch (see Fig. 1-3) in the “C” position works a normal cradle.
Note: The number of Zigbee routers allowed to pair with a cradle varies from one application to another. Consult our technical support if you need more information.
Clear Pairing Settings
Scanning the Undo Pairing barcode can delete all pairing information.
Undo Pairing
** Enter Setup
Operating Mode Options
Power Off
Test Mode1
Reboot Scanner
Reboot Cradle
Note1: Pressing the trigger on the scanner or rebooting the device can exit the Test mode.
** Enter Setup
Power-Off Timeout
The NLS-HR15 Hand-held Barcode Scanner that stays in the sleep mode will be automatically powered off when the timeout occurs (default: 5 minutes). Scan the barcode below to set this parameter.
** 5 Minutes
10 Minutes
20 Minutes
30 Minutes
60 Minutes
Disable Auto Power Off
** Enter Setup
Scan Mode
Manual Mode
Manual Mode (default): A trigger pull activates a decode session. The decode session continues until the barcode is decoded or you release the trigger or the decode session timeout occurs (default: 15 seconds; programmable).
** Manual Mode
Decode Session Timeout: This parameter sets the maximum time decode session continues during a scan attempt. The default timeout is 15s.
To program this parameter, scan the Decode Session Timeout barcode and the numeric barcodes. To find the numeric barcodes, see the “Digit Barcodes” section in Chapter 7.
Decode Session Timeout
Note: Decode Session Timeout: 01-15, corresponding to 1s, 2s, ……, 15s (default), in 1s increments; 00: infinite.
** Enter Setup
Auto Mode
Auto Mode: Pressing the trigger activates a decode session. The decode session continues until the barcode is decoded or the decode session timeout occurs (default: 15 seconds; programmable). The scanner automatically starts one session after another until you press the trigger a second time.
Auto Mode
** Enter Setup
Decode Session Timeout: This parameter sets the maximum time decode session continues during a scan attempt. The default timeout is 15s.
To program this parameter, scan the Decode Session Timeout barcode and the numeric barcodes. To find the numeric barcodes, see the “Digit Barcodes” section in Chapter 7.
Note: Decode Session Timeout: 01-15, corresponding to 1s, 2s, ……, 15s (default), in 1s increments; 00: infinite.
You can also configure whether to allow rereading same barcode. By default, rereading same barcode is not allowed.
Decode Session Timeout
** Disallow Rereading Same Barcode
Allow Rereading Same Barcode
Recalculate Timeout After Good Read
Allow Rereading Same Barcode
This allows the scanner to reread the same barcode that has been decoded in the previous session.
Disallow Rereading Same Barcode
This protects against accidental rereads of the same barcode. If the barcode being scanned is identical with the one previously scanned, the decode session will suspend until a different barcode comes up.
Recalculate Timeout After Good Read
The decode session timeout restarts after a good read.
** Enter Setup
Blink Mode
Blink Mode: The scanner automatically activates a decode session. The decode session continues until the barcode is decoded or the decode session timeout occurs (100ms; non-programmable). When a decode session is completed, the scanner waits until the timeout between decodes occurs (default: 1s, programmable) and then starts next session. The scanner continues to work in this pattern.
Pressing the trigger can also activate a decode session; holding down the trigger can suspend decode session.
Timeout between Decodes: This parameter sets the time period between the end of one decode session and the start of next session. It is programmable in 0.5s increments from 0s to 7.5s. The default timeout is 1s. To program this parameter, scan the Timeout between Decodes barcode and the numeric barcodes.
Note: Timeout between Decodes: 00-15, corresponding to 0s, 0.5s, 1s (default), ……, 7.5s, in 0.5s increments.
Blink Mode
Timeout between Decodes
Example: Set the Timeout between Decodes to 5s (level 10)
1.Scan the Enter Setup barcode.
2.Scan the Timeout between Decodes barcode.
3.Scan the numeric barcodes ”1” and ”0” . (See the “Digit Barcodes” section in Chapter 7)
4.Scan the Exit Setup barcode.
** Enter Setup
Sense Mode
Sense Mode: The scanner activates a decode session every time when it detects a change in ambient illumination (excluding the situation when change is detected before the timeout between decodes occurs). Decode session continues until the barcode is decoded or the decode session timeout occurs.
Pressing the trigger can also activate a decode session. Holding down the trigger can suspend decode session. Same barcode cannot be reread before the timeout between decodes (same barcode) occurs.
Sense Mode
Decode Session Timeout: This parameter sets the maximum time decode session continues during a scan attempt. The default timeout is 15s. To program this parameter, scan the Decode Session Timeout barcode and the numeric barcodes.
Timeout between Decodes: This parameter sets the time period between the end of one decode session and the start of next session. It is programmable in 0.5s increments from 0s to 7.5s. The default timeout is 1s. To program this parameter, scan the Timeout between Decodes barcode and the numeric barcodes.
Note: Decode Session Timeout: 01-15, corresponding to infinite, 1s, 2s,…, 15s (default), in 1s increments; 00: infinite.
Timeout between Decodes: 00-15, corresponding to 0s, 0.5s, 1s (default), …, 7.5s, in 0.5s increments.
Decode Session Timeout
Timeout between Decodes
** Enter Setup
Sensitivity specifies the degree of acuteness of the scanner’s response to changes in ambient illumination. The higher the sensitivity, the lower requirement in illumination change to trigger the scanner. You can select an appropriate degree of sensitivity that fits the ambient environment. By default, High Sensitivity is enabled.
** High Sensitivity
Low Sensitivity
Medium Sensitivity
Custom Sensitivity
It is recommended not to set the custom sensitivity when one of the other three options can meet your needs.
Note: Sensitivity: 00-0F; the smaller the number, the higher the sensitivity.
Example: Set the sensitivity to level 5
1.Scan the Enter Setup barcode.
2.Scan the Custom Sensitivity barcode.
3.Scan the numeric barcodes “0” and “5”. (See the “Digit Barcodes” section in Chapter 7)
4.Scan the Exit Setup barcode.
** Enter Setup
Timeout between Decodes (Same Barcode): This parameter sets the minimum time between decodes for the same barcode. It protects against accidental rereads of the same barcode. It is programmable in 0.1s increments from 0s to 12s. If you want to stop the scanner from rereading the same barcode, set this parameter to 127. The default timeout is 1.6s. To program this parameter, scan the Timeout between Decodes (Same Barcode) barcode, the numeric barcode(s) and the Save barcode.
Timeout between Decodes (Same Barcode)
Note: Timeout between Decodes (Same Barcode): 0-120, corresponding to 0s, 0.1s, …, 1.6s (default), …, 12s, in 0.1s increments; 127: infinite.
Example: Set the timeout between decodes (same barcode) to 5s
1.Scan the Enter Setup barcode.
2.Scan the Timeout between Decodes (Same Barcode) barcode.
3.Scan the numeric barcodes “5” and “0”. (See the “Digit Barcodes” section in Chapter 7)
4.Scan the Save barcode. (See the “Save/Cancel Barcodes” section in Chapter 7)
5.Scan the Exit Setup barcode.
** Enter Setup
Continuous Mode
Continuous Mode: The scanner automatically activates a decode session. The decode session continues until the barcode is decoded. When a decode session is completed, the scanner waits until the timeout between decodes occurs and then starts next session. The scanner continues to work in this pattern. Same barcode cannot be reread before the timeout between decodes (same barcode) occurs.
Holding down the trigger can also activate the scanner to decode continuously, but with no intervals (i.e. timeout between decodes will be ignored).
Continuous Mode
** Enter Setup
Timeout between Decodes: This parameter sets the time period between the end of one decode session and the start of next session. It is programmable in 0.5s increments from 0s to 7.5s. The default timeout is 1s. To program this parameter, scan the Timeout between Decodes barcode and the numeric barcodes.
Note: Timeout between Decodes: 00-15, corresponding to 0s, 0.5s, 1s (default), ……, 7.5s, in 0.5s increments.
Timeout between Decodes
Timeout between Decodes (Same Barcode): This parameter sets the minimum time between decodes for the same barcode. It protects against accidental rereads of the same barcode. It is programmable in 0.1s increments from 0s to 12s. If you want to stop the scanner from rereading the same barcode, set this parameter to 127. The default timeout is 1.6s. To program this parameter, scan the Timeout between Decodes (Same Barcode) barcode, the numeric barcodes and the Save barcode.
Note: Timeout between Decodes (Same Barcode): 0-120, corresponding to 0s, 0.1s, …, 1.6s (default), …, 12s, in 0.1s increments; 127: infinite.
Timeout between Decodes (Same Barcode)
Example: Set the timeout between decodes (same barcode) to 5s:
1.Scan the Enter Setup barcode.
2.Scan the Timeout between Decodes (Same Barcode) barcode.
3.Scan the numeric barcodes “5” and “0”. (See the “Digit Barcodes” section in Chapter 7) 4.Scan the Save barcode. (See the “Save/Cancel Barcodes” section in Chapter 7) 5.Scan the Exit Setup barcode.
** Enter Setup
Delayed Sense Mode
Delayed Sense Mode: The scanner automatically activates a decode session when it detects a change in ambient illumination. The decode session continues until the barcode is decoded or the decode session timeout occurs. When a decode session is completed, the scanner waits 200ms and then starts to monitor ambient environment until it detects a change to trigger next decode session. Same barcode cannot be reread before the timeout between decodes (same barcode) occurs.
Delayed Sense Mode
Decode Session Timeout: This parameter sets the maximum time decode session continues during a scan attempt. To program this parameter, scan the Decode Session Timeout barcode and the numeric barcodes.
Timeout between Decodes (Same Barcode): This parameter sets the minimum time between decodes for the same barcode. It protects against accidental rereads of the same barcode. It is programmable in 0.2s increments from 0s to 3s. To program this parameter, scan the Timeout between Decodes (Same Barcode) barcode and the numeric barcodes.
Note: Decode Session Timeout: 01-15, corresponding to 2s, 4s,…, 30s, in 2s increments; 00: infinite.
Timeout between Decodes (Same Barcode): 00-15, corresponding to 0s, 0.2s,…,3s,in 0.2s increments.
Decode Session Timeout
Timeout between Decodes (Same Barcode)
** Enter Setup
Security Setup
This parameter specifies the number of times to decode a barcode during a scan attempt. The higher the security level, the lower the error rate and decoding efficiency. By default, security is set to be level 1.
** Set Security Level to 1
Set Security Level to 3
Set Security Level to 2
Set Security Level to 4
** Enter Setup
Decode Beep
By default, the scanner emits a medium-pitched loud beep that lasts 150ms after good decode.
Do Not Beep After Good Decode
Medium-Pitched Medium-Loud Beep
High-Pitched Loud Beep
Medium-Pitched Low Beep
High-Pitched Medium-Loud Beep
Low-Pitched Loud Beep
High-Pitched Low Beep
Low-Pitched Medium-Loud Beep
** Medium-Pitched Loud Beep
Low-Pitched Low Beep
** Enter Setup
** Set Beep Length to 150ms
Set Beep Length to 50ms
Set Beep Length to 100ms
** Enter Setup
Decode Area and Output Interval
You can set the number of barcodes allowed to be read per scan. By default, the Read One Barcode Nearest to the Center Per Scan option is enabled.
You can also set the decoded data output interval. By default, output interval is 0ms.
Read 2 Barcodes Per Scan
** Read One Barcode Nearest to the Center Per Scan
Read 3 Barcodes Per Scan
Read One Barcode At The Center Per Scan
Read 4 Barcodes Per Scan
Set Output Interval to 100ms
** Set Output Interval to 0ms
Set Output Interval to 150ms
Set Output Interval to 50ms
Loading…