Stihl fs 55 инструкция по эксплуатации скачать бесплатно

1. Manuals
2. Brands
3. Stihl Manuals
4. Trimmer
5. FS 55
6. Instruction manual

• Page 1
  STIHL FS 55 Instruction Manual…

• Page 3: Table Of Contents

  Minimize Wear and Avoid Damage Main Parts Specifications Maintenance and Repairs This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process with electronic systems. FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 4: Techniques

  Secure it against unauthorized use. Intake air: Winter operation The user is responsible for avoiding injury to third parties or damage to their property. Handle heating FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 5
  STIHL or material (e.g. leather). are technically identical. If you have any questions in this respect, consult a FS 55, FS 55 C, FS 55 R, FS 55 RC…
• Page 6
  To reduce the risk of seri- good condition. the engine until leak is fixed. ous burn injuries, avoid touching hot parts of the machine, including the gearbox housing. FS 55, FS 55 C, FS 55 R, FS 55 RC…
• Page 7
  / stop switch to STOP or 0. securely. The cutting attachment must be clear of the ground and all other obstructions because it may begin to run when the engine starts. FS 55, FS 55 C, FS 55 R, FS 55 RC…
• Page 8
  – do not run the engine Be particularly alert and cautious when unnecessarily, accelerate the engine wearing hearing protection because only when working. your ability to hear warnings (shouts, alarms, etc.) is restricted. FS 55, FS 55 C, FS 55 R, FS 55 RC…
• Page 9
  The forces that occur act on and result in serious or fatal injuries. attachment. the machine, the attachment and the material being cut. FS 55, FS 55 C, FS 55 R, FS 55 RC…
• Page 10
  The force with which the handles starter with the spark plug boot or spark – are held (a tight grip restricts plug removed unless the slide control / circulation). FS 55, FS 55 C, FS 55 R, FS 55 RC…
• Page 11
  STIHL Polycut Mowing Head with Polymer Blades For mowing unobstructed edges of meadows (without posts, fences, trees or similar obstacles). FS 55, FS 55 C, FS 55 R, FS 55 RC…
• Page 12
  The risk of kickout is greatest when the parts. black area of the rotating cutting attachment comes into contact with a Resharpen the grass cutting blade solid object. according to instructions when it has dulled noticeably. FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 13: Approved Combinations Of Cutting Attachment, Deflector, Handle And Harness

  No other STIHL AutoCut C 25-2 combinations are permitted because of STIHL AutoCut 25-2 the risk of accidents. STIHL TrimCut 31-2 STIHL DuroCut 20-2 FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 14: Mounting The Bike Handle

  18 Full harness may be used Insert screws (7) through the holes in the parts and screw them into the clamp (6) as far as they will go FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 15: Mounting The Loop Handle

  Screw in the bolt (8) and tighten up Fasten the throttle cable NOTICE Do not kink the throttle cable or run it in tight radiuses – the throttle trigger must move freely! FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 16
  Go to «Securing the Loop Handle». barrier bar is fitted – lock the nuts if necessary. The sleeve (9) (not fitted on all models) must be between the loop handle and the control handle. FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 17: Fitting The Carrying Ring

  Insert the M6x14 screw (2). Mounting the deflector Line up the carrying ring. Tighten down the screw firmly. Deflectors (1) and (2) are both mounted to the gearbox in the same way. FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 18: Mounting The Cutting Attachment

  Machine supplied with mounting Machine supplied without mounting hardware hardware Mowing heads and metal cutting attachments may be mounted. Only mowing heads may be used which mount directly to the shaft (2). FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 19
  Remove the tool used to block the shaft. Use a deflector that matches the cutting attachment – see «Mounting the Removing the Mowing Head Deflector». Block the shaft. Unscrew the mowing head clockwise. FS 55, FS 55 C, FS 55 R, FS 55 RC…
• Page 20
  (5) will already be mounted. Securing the cutting attachment Fit the thrust washer (6) – convex side must face up. Fit the rider plate (7). FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 21: Fuel

  Gasoline Clean the fuel tank and canister from time to time. Use only high-quality brand-name gasoline with a minimum octane rating of 90 – leaded or unleaded. FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 22: Fueling

  Put on the shoulder strap (1). Adjust the length of the strap so that the carabiner (2) is about a hand’s width below your right hip. Balance the machine. FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 23: Balancing The Machine

  Move the carrying ring up or down the drive tube – tighten the screw moderately – let the unit go and wait until is its balanced – then check the floating position. FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 24: Starting / Stopping The Engine

  START – ignition is switched on – the engine can start F – normal run position – the engine is running or can start STOP-0 – engine off – the ignition is switched off FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 25
  I – normal run position – the engine can start or is running Go to «All versions». 0 – Stop – engine off – the ignition is switched off FS 55, FS 55 C, FS 55 R, FS 55 RC…
• Page 26
  Do not pull out the starter rope all the not rotate when the engine is idling. way – it might otherwise break. Do not stand or kneel on the drive tube. FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 27: Transporting The Unit

  Plug». Move the slide control or stop switch to F / I. Set the choke lever to e – even if the engine is cold. Now start the engine. FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 28: Operating Instructions

  For longer out-of- service periods – see «Storing the Machine». FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 29: Adjusting The Carburetor

  A different standard setting is necessary for each of these carburetors. Identifying the Carburetor Use the following illustrations to identify the carburetor installed in your machine and then adjust the carburetor as described: FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 30
  Turn the low speed screw (L) slowly runs smoothly – the cutting clockwise, no further than stop, until attachment must not rotate. the engine runs smoothly and still accelerates satisfactorily. Carburetor 2 FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 31: Spark Plug

  (1), screw the engine damage due to insufficient adapter onto the thread and tighten it lubrication and overheating. down firmly to reduce the risk of arcing and fire. FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 32: Engine Running Behavior

  Store the machine in a dry and secure location – out of the reach of children and other unauthorized persons. FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 33: Sharpening Metal Cutting Blades

  – and allow it to spring head. balanced as necessary – STIHL back. recommends a STIHL servicing Pull ends of the lines outward. dealer. FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 34: Inspections And Maintenance By Dealer

  WARNING If there are signs of serious wear, replace the complete mowing head. The thermoplastic cutting blades are referred to as «blades» in the following. FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 35: Maintenance And Care

  Cooling inlets Clean Have checked by servicing dealer Spark arrestor in muffler Have cleaned or replaced by servicing dealer All accessible screws and nuts (not adjust- Retighten ing screws) FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 36
  Visual inspection Cutting attachment Replace Check tightness Metal cutting attachment Sharpen Safety labels Replace STIHL recommends an authorized STIHL servicing dealer. not in all versions, market-specific FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 37: Minimize Wear And Avoid Damage

  Clutch – STIHL recommends that you have Filters (air, fuel) – servicing and repair work carried out exclusively by an authorized STIHL FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 38: Main Parts

  13 Choke lever 14 Air filter cover 15 Tank cap 16 Tank 17 Machine support 18 Loop handle 19 Barrier bar (country specific) 20 Drive tube 21 Stop switch Serial number FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 39: Specifications

  For further details on compliance with Cut-off speed (rated): 10,000 rpm Vibration Directive 2002/44/EC see www.stihl.com/vib. Max. output shaft speed (cutting attachment): 8,100 rpm Ignition System Electronic magneto ignition FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 40: Maintenance And Repairs

  The K-factor in accordance with Directive 2006/42/EC is 2.5 dB(A) for the sound pressure level and sound power level; the K-factor in accordance with Directive 2006/42/EC is 2.0 m/s for the vibration measurement. FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 41: Guide To Using This Manual 2 Disposal

  Directive 2000/14/EC, Annex V, using the ISO 10884 standard. Measured sound power level 108 dB(A) Guaranteed sound power level 110 dB(A) Technical documents deposited at: FS 55, FS 55 C, FS 55 R, FS 55 RC…

• Page 42
  English FS 55, FS 55 C, FS 55 R, FS 55 RC…
• Page 44
  0458-233-0121-F englisch www.stihl.com *04582330121F* 0458-233-0121-F…

(скачивание инструкции бесплатно)

{

STIHL FS 55

Инструкция по эксплуатации

Страница:
(1 из 44)

навигация

1. Manuals
2. Brands
3. Stihl Manuals
4. Trimmer
5. FS 55
6. Instruction manual

• Page 1
  STIHL FS 55 2 — 36 Instruction Manual…

• Page 2: Table Of Contents

  Engineering improvements faction and trouble-free use of the product. Please contact your dealer or our sales company STIHL’s philosophy is to continually improve all if you have any queries concerning this product. of its products. For this reason we may modify…

• Page 3
  User Manual may that are explicitly approved for this power tool cause serious or even fatal injury. model by STIHL or are technically identical. If Observe all applicable local safety regulations, you have any questions in this respect, consult e.g.
• Page 4
  Only refuel the machine in a well ventilated STIHL can supply a comprehensive range of per‐ place. If fuel has been spilled, immediately clean sonal protective equipment. the machine – do not allow your clothes to be splashed with fuel.
• Page 5
  2 Safety Precautions and Working Techniques English Holding and guiding the – Safety devices (e. g., deflector for cutting attachments, rider plate) for damage and/or machine wear. Always replace damaged parts. Do not Always hold the unit firmly with both hands on use the machine with a damaged deflector or the handles.
• Page 6
  (e.g. heavy adjustments or repairs. STIHL recommends you impact or a fall), always check that it is in good have this work done by a STIHL servicing dealer. condition before continuing work – see also «Before Starting».
• Page 7
  For manually adjustable mowing heads, always and have a suitable geometry (shape, thickness). switch off the engine before adjusting the mow‐ A metal cutting attachment not made by STIHL ing line – risk of injury! must not have a different weight, thickness,…
• Page 8
  Check the fuel filler cap for leaks at regular inter‐ combination with a shoulder strap. vals. Use only a spark plug of the type approved by STIHL and make sure it is in good condition – see «Specifications». Inspect the ignition lead (insulation in good con‐ dition, secure connection).
• Page 9
  2.15 STIHL Polycut Mowing Head with a solid object such as a tree trunk, branch, tree stump, rock or with Polymer Blades similar. The machine is thrown to the right or to the rear –…
• Page 10
  English 2 Safety Precautions and Working Techniques The risk of kickout is greatest when the black Use for grass and weeds only – sweep the area of the rotating cutting attachment comes brushcutter in an arc like a scythe. into contact with a solid object. WARNING 2.17 Grass Cutting Blade…

• Page 11: Approved Combinations Of Cutting Attach- Ment, Deflector, Handle And Harness

  3.2.1 Mowing heads Deflectors 1 STIHL SuperCut 20‑2 12 Deflector for mowing heads 2 STIHL AutoCut C 25-2 13 Deflector for metal cutting attachments 3 STIHL AutoCut 25-2 Handles 4 STIHL AutoCut C 26-2 5 STIHL FixCut 31-2…

• Page 12: Mounting The Bike Handle

  English 4 Mounting the Bike Handle Shoulder straps 18 Shoulder strap can be used 19 Shoulder strap must be used 20 Full harness can be used Mounting the Bike Handle Mounting the Handlebar ► Fasten the handlebar (4) at a distance (A) of approx.

• Page 13: Mounting The Loop Handle

  5 Mounting the Loop Handle English Mounting the Loop Handle ► Unscrew the bolt (8) with a combination wrench or hex key wrench – the nut (9) Mounting Loop Handle with remains in the control handle (10) ► Push the control handle with the throttle trig‐ Barrier Bar ger (11) facing toward the gearbox onto the handlebar (4) until the holes (12) align…

• Page 14
  English 5 Mounting the Loop Handle Securing the Loop Handle ► Position the clamp (6) against the drive tube. ► Place the barrier bar (2) in position as shown. ► Line up the holes. ► Insert the screws (7) in the holes and screw them into the barrier bar (2) as far as stop.

• Page 15: Fitting The Carrying Ring

  6 Fitting the Carrying Ring English Fitting the Carrying Ring Polymer Version For position of carrying ring see «Main Parts». ► Place the clamp (1) against the drive tube with the tapped hole on the left (viewed from For position of carrying ring see «Main Parts». engine).

• Page 16: Mounting The Cutting Attachment

  English 8 Mounting the Cutting Attachment Mounting the Cutting WARNING Attachment Deflector (1) is approved for mowing heads only Placing power tool on the and must therefore be mounted before fitting a ground mowing head ► Shut off the engine. ►…

• Page 17
  8 Mounting the Cutting Attachment English Removing the Mounting Hard‐ Depending on the cutting attachment, it may be ware necessary to use the nut (3), rider plate (4) and thrust washer (5). These parts are included in a kit supplied with the machine and are also available as special accessories.
• Page 18
  English 8 Mounting the Cutting Attachment 8.8.1 STIHL FixCut 31-2 ► Fit the thrust plate ► Turn the mowing head anticlockwise on the ► Fit the thrust plate (2). shaft (1) as far as it will go ► Place the mowing head on the thrust plate (2).
• Page 19
  8 Mounting the Cutting Attachment English 8.10 Mounting Metal Cutting Attach‐ WARNING ment Direction of rotation is indicated by an arrow on WARNING the inside of the deflector. Wear protective gloves to reduce the risk of direct contact with the sharp cutting edges. Mount only metal cutting attachments.

• Page 20: Fuel

  (5). Fuel 9.2.2 Engine Oil If you mix the fuel yourself, use only STIHL two- Your engine requires a mixture of gasoline and stroke engine oil or another high-performance engine oil. engine oil in accordance with JASO FB, JASO…

• Page 21: Fueling

  Attachment, Deflector, Handle and Harness». temperatures can quickly make the fuel mix 11.1 Shoulder strap unusable. STIHL MotoMix may be stored for up to 2 years without any problems. ► Thoroughly shake the mixture in the canister before fueling your machine. WARNING Pressure may build up in the canister –…

• Page 22: Balancing The Machine

  English 12 Balancing the Machine 11.2 Full Harness ► Attach the carabiner (1) to the carrying ring (2) on the drive tube. ► Put on the harness (1) and close the locking ► Loosen the screw (3). plate (3). ► Adjust the length of the strap – with the 12.2 Floating position machine attached, the carabiner (2) must be…

• Page 23: Starting / Stopping The Engine

  13 Starting / Stopping the Engine English 12.3 Detaching the unit from the 5 F – normal run position – the engine is running harness or can start 6 STOP‑0 – engine off – the ignition is switched 13.1.3 Symbol on slide control 7 h –…

• Page 24
  English 13 Starting / Stopping the Engine 13.3 All models Positions of stop switch 6 I – normal run position – the engine can start or is running 7 0 – Stop – engine off – the ignition is switched 13.2.2 Starting ►…
• Page 25
  13 Starting / Stopping the Engine English ► Put the unit on the ground: It must rest NOTICE securely on the engine support and the deflec‐ tor. Do not pull out the starter rope all the way – it ► If fitted: Remove the transport guard from the might otherwise break.

• Page 26: Transporting The Unit

  English 14 Transporting the Unit ► Set the choke lever to e . ► Set the slide control, trigger lockout lever and throttle trigger to the starting throttle position. ► Start the engine by pulling the starter rope briskly – 10 to 20 pulls may be necessary. 13.5.1 If the engine still does not start ►…

• Page 27: Cleaning The Air Filter

  16 Cleaning the Air Filter English 15.3 After Finishing Work Storing for a short period: Wait for the engine to cool down. Empty the fuel tank and keep the machine in a dry place, well away from sources of ignition, until you need it again. For longer out- of-service periods –…

• Page 28
  English 17 Adjusting the Carburetor 17.4 Identifying the Carburetor ► Turn the low speed screw (L) carefully clock‐ wise until it is against its seat, then it back it off ► Use the following illustrations to identify the a 3/4 turn. carburetor installed in your machine and then adjust the carburetor as described: 17.6…

• Page 29: Spark Plug

  – or sooner if the electrodes are badly isfactorily. eroded. Install only suppressed spark plugs of the type approved by STIHL – see «Specifica‐ Carburetor 2 tions». ► Rotate the low speed screw (L) slowly about 1/4 turn counterclockwise until the 18.1…

• Page 30: Engine Running Behavior

  ► After resharpening about 5 times, check the cutting attachment for out-of-balance on a STIHL recommends that you have servicing and STIHL balancer (special accessory) or have it repair work carried out exclusively by an author‐…

• Page 31: Maintaining The Mowing Head

  If there are signs of serious wear, replace the PolyCut in place of the cutting blades. complete mowing head. STIHL DuroCut, STIHL FixCut, STIHL PolyCut The nylon mowing line is referred to as «nylon WARNING line» or «line» in the following.

• Page 32: Inspections And Maintenance By Dealer

  23 Inspections and Mainte‐ nance by Dealer 23.1 Maintenance Work STIHL recommends that you have servicing and repair work carried out exclusively by an author‐ ized STIHL servicing dealer. 24 Maintenance and Care The following intervals apply to normal operating conditions only.

• Page 33: Main Parts

  Visual inspection Replace Check tightness Metal Cutting Attachment Sharpen Safety labels Replace 1)STIHL recommends an authorized STIHL servicing dealer.2)not in all versions, market-specific 25 Main Parts 8 Throttle trigger lockout 9 Bike handle (handlebar) 10 Handle support 11 Carrying ring…

• Page 34: Specifications

  95 dB(A) 26 Specifications with metal mowing attachment FS 55 with bike handle: 94 dB(A) 26.1 Engine FS 55 R with barrier bar: 94 dB(A) Single cylinder two-stroke engine 26.5.2 Sound power level L to ISO 22868 26.1.1 FS 55…

• Page 35: Maintenance And Repairs

  Exhaust Emissions The CO value measured in the EU type approval procedure is specified at www.stihl.com/co2. STIHL products must not be thrown in the gar‐ The measured CO value was determined on a bage can. Take the product, accessories and representative engine in accordance with a packaging to an approved disposal site for envi‐…

• Page 36
  Measured sound power level 108 dB(A) Guaranteed sound power level 110 dB(A) Technical documents deposited at: ANDREAS STIHL AG & Co. KG Produktzulassung (Product Licensing) The year of manufacture and serial number are applied to the product. Done at Waiblingen, 03.02.2020 ANDREAS STIHL AG &…
• Page 37
  29 EC Declaration of Conformity English 0458-233-8321-G…
• Page 38
  English 29 EC Declaration of Conformity 0458-233-8321-G…
• Page 39
  29 EC Declaration of Conformity English 0458-233-8321-G…
• Page 40
  *04582338321G* 0458-233-8321-G…