Термописец transcan 2 adr инструкция

Описание

Купить РЕГИСТРАТОР ТЕМПЕРАТУРЫ TranScan 2 ADR (Новый) в Москве

• Категория: Регистраторы температуры, термографы, терморегистраторы.

* ! наличие и цены уточняйте по телефону или через запрос в чат
  Написать сообщение

Основные характеристики TranScan 2 ADR

Простой автономный регистратор температуры, имеет 2 детектора.

Тип установки:

• Trailer;
• 12V-24V.

Дополнительные возможности:

• Возможность подключения четырех датчиков измерения (в комплекте два детектора);
• Открытый датчик двери;
• Сигнал тревоги.

TranScan 2 User Reference Manual (T410)= 1, =2, =3, =4, =5, h = 6, m = 7.5.1 Printing the parametersBefore attempting to adjust any of the configuration parameters it is recommended that a printout of theparameters is taken.Press and together and the display shows Enter PIN codePress , , , (PIN code 1,2,1,2) and after a short pause the parameters and their current settings will beprinted.A typical parameter printout is shown below:-Printed Parameter list Parameter Description SectionCCI TranScanTS2-T410.010-512Start time>00:00Stop time>00:00Product description and sign on messageRecording Regime5.2.15.2.2Log by Day >OFFRecording Interval5.2.3min/update> 0010Graph length per hour5.2.4mms/hour > 0020Door switch > OFFDeIce switch> OFFSpare switch>OFFAlarm enable>OFFGraph high> 0010Graph low >-0030Preset names> ONTemperature1> ONT1 name >FrontTemperature2> ONT2 name >RearTemperature3>OFFTemperature4>OFFAlarm set 1 >OFFAlarm set 2 >OFFOn /Off inputsAlarm enable / disableGraph scalingEnables temp channel preset descriptionsTemperature channels and descriptionsAlarm parameters5.2.55.2.65.2.75.2.85.2.95.2.10Print T1 > ONAlarm on T1 >OFFPrint T2 > ONAlarm on T2 >OFFInformation to be included in reports5.2.11Print T3 >OFFAlarm on T3 >OFFPrint T4 >OFFAlarm on T4 >OFFPrint Door >OFFPrint De-Ice>OFFPrint Spare >OFFENG Display >OFFVehicle>TRL 1234Title1 >Food SupTitle2 >ply Co.Signature: 0556Allows access to engineering parametersVehicle IdentifierAdditional identifiers e.g. used for Company NameA 4 digit number unique to this parameter set5.2.125.2.135.2.135.2.14UDN1593 Issue A © <strong>Seven</strong> <strong>Telematics</strong> 2011 Page 16 of 24

TranScan 2 User Reference Manual (T410)5.2 Accessing configuration parametersTo enter the configuration mode and adjust individual parameters it is necessary to enter a PIN codePress and together and the display shows Enter PIN codePress , , , (PIN code 1,1,1,1) and the first parameter Start time > 00:00 is displayed.PIN code (1,1,1,1) is the factory default value (see 5.0 and 5.2.12)The operating keys have the following functions in configuration modesteps to the previous parameterexits configuration modesteps to the next parametershifts cursor one place left◄shifts cursor one place right►h scrolls backwards through available characters ▼m scrolls forward through available characters ▲Each parameter consists of a prompt followed by a value that can be changed. Values are one of three differenttypes:-ON/OFF values change between ON and OFF by pressing , , h, or mNumeric values use ◄ and ► to position the cursor and ▼ and ▲ to select the value requiredAlphanumeric values use ◄ and ► to position the cursor and ▼ and ▲ to select the character required5.2.1 Product description and sign on messageThe product description and sign on message appear on the parameter printout (see 5.1) but are not accessiblein configuration mode. The sign on message also appears whenever the power to the recorder is restored andis of the formatTS2-T410.010-512Product typeData memory size in KbNOTE: It is possible to reset the recorder without disconnecting the power. This is called a “Soft Reset” and willinitialise the recorder and display the sign on message. The soft reset does not interrupt the recording process.Press and together and the display shows Enter PIN codePress and together 4 times and the display shows INITIALISING followed by the sign on message.See also 5.2.14 “Signature”.5.2.2 Recording regimeStart time > 00:00Stop time > 00:00These define the daily start and stop times for the ADR (Automatic Daily Recording) system. If the start time isafter the stop time then the recording continues through midnight.Log by Day > OFFFirmware (product software) versionUDN1593 Issue A © <strong>Seven</strong> <strong>Telematics</strong> 2011 Page 17 of 24

Available Features

For refrigerated vehicles

• Refrigerated truck
• Refrigerated van

Printout (Ticket) Options

• Delivery Ticket
• Journey
• Multi Day Printouts

Temperature alarm option

Winter/summer clock adjustment

In-built help facility

Downloadable to computer:

• via DCU (data collection unit)
• directly to laptop

Inputs

• 4 temperature plus
• 4 event (on/off)

RS232 port for connection to on board computer system for vehicle tracking and location applications

Further technical specifications and accessories of the Transcan 2ADR.

Доброго времени суток!!!
Как настроить дату и время на регистраторе температуре, а также изменить запись о госномере и название фирмы? Многие задают такой вопрос и пытаются сделать и настроить регистратор температуры!

Смотрите видео внимательно!)
В каждой правда есть доля шутки!)))

Плейлист «Ремонт рефрижераторов»
🤍🤍youtube.com/playlist?list=PLSLe2VrbzuQ38juo-lk-jBhtTRySUyz6s

Плейлист «Ремонт автономок»
🤍🤍youtube.com/playlist?list=PLSLe2VrbzuQ1ApQvysqapWG4IDRDs8ii5

Телефон для связи
+79376187313

🗣️📢Если Вам интересно,💞 то не забудьте подписаться📨👍 и нажать на колокольчик🔔, чтоб ничего не пропустить🎦
🤍🤍youtube.com/c/ВасилийШироков

#ремонтрефрижераторов#авторефрижератор#carrier#thermoking#автохолодильник#холодильник#холодильщики#татреф#Василий Широков